Jelly Bean ROM seems irremovable!! Help please! - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

So I flashed the following rom this morning
http://forum.xda-developers.com/showthread.php?t=1953847
And I don't really like it. I am trying to flash CM9 over it but i can't!
I keep getting failed installations in CWM. I tried the same with BlackCNA and it didn't work either?
Doing a full wipe/factory reset doesn't seem to have any effect either, the phone boots into this ROM ALL the time. I haven't a clue as to what is going on. Can anyone please help! Thanks

Did you try to change the kernel and a full wipe ?

LuketaD2 said:
Did you try to change the kernel and a full wipe ?
Click to expand...
Click to collapse
I did not, and I probably do not know how. Could you point me in the right direction please?

I dont think the kernels available are compatible for jb leak
I guess the rom file might be damaged..Try downloading the rom again and flash it

georgeos said:
So I flashed the following rom this morning
http://forum.xda-developers.com/showthread.php?t=1953847
And I don't really like it. I am trying to flash CM9 over it but i can't!
I keep getting failed installations in CWM. I tried the same with BlackCNA and it didn't work either?
Doing a full wipe/factory reset doesn't seem to have any effect either, the phone boots into this ROM ALL the time. I haven't a clue as to what is going on. Can anyone please help! Thanks
Click to expand...
Click to collapse
better install a Gb rom using Odin and do a factory reset from recovery. once the phone boots up, either root and get cwm to install CM9 o upgrade to ICS and root and install CM9

rajsekhar.300 said:
I dont think the kernels available are compatible for jb leak
I guess the rom file might be damaged..Try downloading the rom again and flash it
Click to expand...
Click to collapse
Downloading and re-flashing now, will get back to you to see if that has any effect
nokiamodeln91 said:
better install a Gb rom using Odin and do a factory reset from recovery. once the phone boots up, either root and get cwm to install CM9 o upgrade to ICS and root and install CM9
Click to expand...
Click to collapse
And sorry, I'm a bit of a noob, this Note is my first Android phone (Was a BB user) and I've only had it a month. Could you point me in the right direction?

if what you are trying doesnot work..
use this thread
http://forum.xda-developers.com/showthread.php?t=1424997

nokiamodeln91 said:
if what you are trying doesnot work..
use this thread
http://forum.xda-developers.com/showthread.php?t=1424997
Click to expand...
Click to collapse
But what is the reason for it not letting me flash a new ROM

did u try to
format /system
format /data
then install the ROM?

nokiamodeln91 said:
did u try to
format /system
format /data
then install the ROM?
Click to expand...
Click to collapse
Yes I did, and when trying to flash CM9 I get this:
E: Error in /sdcard/cm9-nightly-n7000.zip (status 7)
Installation aborted.
And this happens with all roms that I try

not sure about the issue but PC odin will rescue u i guess

georgeos said:
Yes I did, and when trying to flash CM9 I get this:
E: Error in /sdcard/cm9-nightly-n7000.zip (status 7)
Installation aborted.
And this happens with all roms that I try
Click to expand...
Click to collapse
So try flashing a stock rom through pc odin

rajsekhar.300 said:
So try flashing a stock rom through pc odin
Click to expand...
Click to collapse
I have no idea how to do that. Could you give me the link to a tutorial?

georgeos said:
I have no idea how to do that. Could you give me the link to a tutorial?
Click to expand...
Click to collapse
Download a stock gb rom from here
http://forum.xda-developers.com/showthread.php?t=1424997
Connect your phone to pc
Select pda tab and browsethe rom and select it and then flash it

rajsekhar.300 said:
Download a stock gb rom from here
http://forum.xda-developers.com/showthread.php?t=1424997
Connect your phone to pc
Select pda tab and browsethe rom and select it and then flash it
Click to expand...
Click to collapse
odds of a brick?

try this.
georgeos said:
Yes I did, and when trying to flash CM9 I get this:
E: Error in /sdcard/cm9-nightly-n7000.zip (status 7)
Installation aborted.
And this happens with all roms that I try
Click to expand...
Click to collapse
First.... If back up yr sd card data. Format it n then recopy the CM9 zip file.
Second.... Download the latest ics rom from the link below. Choose your region or carrier correctly.
http://forum.xda-developers.com/showthread.php?t=1424997
Third..... Download odin from this link
http://forum.xda-developers.com/showthread.php?t=1801341
Fourth.... Download phil safe kernel as per yr region.
Now yr ready with yr tools.
Do a complete wipe/data/factory reset/cache /dalvik cache/battery stats..
Next open odin n put yr phone to download mode n follow screen shots provided by dr.ketan in flashing stock rom.
Once it passes. Yr on stock ics rom with ics kernel. now flash philz safe kernel through stock recovery.
Then in CWM on philz safe kernel u can flash CM9 n it should get u back to CM9.

georgeos said:
odds of a brick?
Click to expand...
Click to collapse
There is no chance of bricking your phone unless you do it wrongly

odin safest
georgeos said:
odds of a brick?
Click to expand...
Click to collapse
no chances of brick using odin.
Jus check the images of odin during flashing proceess in my previous post n cross check twice before u click start button on odin.

Related

URGENT Please help:Unable to install Slim ics rom

Whenever i install the Slim ics from Cwm recovery, it just keeps going in a bootloop
I have no idea what i must do to fix this?
I have factory reset, cleared cache n dalvik
Pls help urgent
I come from the Aosp rom by bhuvan goyal.
try to install it again,if it doesn't work make a clean install by
flashing xxjvu>flash kernel supported cwm>wipe all>install ics slim
if it still doesn't work after you stuck in bootlogo,install ics slim again
hope it works
trustsyzaa said:
try to install it again,if it doesn't work make a clean install by
flashing xxjvu>flash kernel supported cwm>wipe all>install ics slim
if it still doesn't work after you stuck in bootlogo,install ics slim again
hope it works
Click to expand...
Click to collapse
Same bloody problem,bootloops like hell
Can you give a link for XXJVU so that i can install Ics after that
Any other assistance? common guys
ramu
darkkid85 said:
Same bloody problem,bootloops like hell
Can you give a link for XXJVU so that i can install Ics after that
Any other assistance? common guys
ramu
Click to expand...
Click to collapse
common guys i need assistance here
what is this forum for?
calm down and sorry dude i just woke up about a minute ago
here is a download link for xxjvu> http://www.filefactory.com/file/c306c7d/n/I9000XXJVU_I9000OXAJVU_OXA.rar
and root kernel>http://download.chainfire.eu/132/CF-Root/SGS/CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.zip
Faryaab said:
Instructions For Flashing Firmware:
Extract the firmware
Put your device into Download MODE
Start Odin
Click PDA and select CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.m d5
Click PHONE and select MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5
Click CSC and select GT-I9000-CSC-MULTI-OXAJVU.tar.md5
Then finally click START!
Instructions For Rooting JVU :
Extract the Rooted Kernel
Open Odin
Put your device into Download MODE
Click PDA and select CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.tar
Then finally click START!
Click to expand...
Click to collapse
Credit the download link and installation guide to faryaab and chainfire
When you get into bootloops, flash the kernel from the rom using heimdall and reflash rom in cwm
darkkid85 said:
Whenever i install the Slim ics from Cwm recovery, it just keeps going in a bootloop
I have no idea what i must do to fix this?
I have factory reset, cleared cache n dalvik
Pls help urgent
I come from the Aosp rom by bhuvan goyal.
Click to expand...
Click to collapse
Try, in cwm factory reset/wipe cache/wipe delvik/format system/format cache/format data data and flash 2.8 Essentials i9000 first then Base 2.8 (if bootloops pullout battery, put it back, enter recovery, reset, wipe, flash base again) and then Essentials again.
beardedwonder said:
When you get into bootloops, flash the kernel from the rom using heimdall and reflash rom in cwm
Click to expand...
Click to collapse
how do you do that? the rom is 1 zip file. do i extract it?
xSamuraix said:
how do you do that? the rom is 1 zip file. do i extract it?
Click to expand...
Click to collapse
Unzip it and then push the file zImage to your phone with Heimdall while in download mode.
On command line, it's:
heimdall flash --kernel zImage
There's probably a way to do it in the GUI, too.

Stuck on boot screen

I just flashed a new rom
Alba syndicate
And im stuck on the boot screen
what should i do?
Hearmeman said:
I just flashed a new rom
Alba syndicate
And im stuck on the boot screen
what should i do?
Click to expand...
Click to collapse
Have you check md5 rom.hold power+home+volumn to push back into recovery then reflash the rom again or another the one.
Good luck...
simplelife said:
Have you check md5 rom.hold power+home+volumn to push back into recovery then reflash the rom again or another the one.
Good luck...
Click to expand...
Click to collapse
reflash hasn't worked
i want this rom cant i do something else?
Hearmeman said:
reflash hasn't worked
i want this rom cant i do something else?
Click to expand...
Click to collapse
I mean ,had you check the rom you download are full sometime it's download shorter then support to ( example: the rom support 600 mb but you are download just 580 mb and you don't know...hope this help
simplelife said:
I mean ,had you check the rom you download are full sometime it's download shorter then support to ( example: the rom support 600 mb but you are download just 580 mb and you don't know...hope this help
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1579301
It doesn't say here
the download is full on my computer 881MB
tried with diffrent kernel
any clues?
are you still able to boot in download mode? if you are still able to... in my rule of law in flashing ROMS.... custom or otherwise...downgrade first to stock GB, then once your in stock GB, that'll be the time you wipe data/factory reset, and then upgrade to Alba syndicate.
letters_to_cleo said:
are you still able to boot in download mode? if you are still able to... in my rule of law in flashing ROMS.... custom or otherwise...downgrade first to stock GB, then once your in stock GB, that'll be the time you wipe data/factory reset, and then upgrade to Alba syndicate.
Click to expand...
Click to collapse
I Need a rooted GB?
Hearmeman said:
http://forum.xda-developers.com/showthread.php?t=1579301
It doesn't say here
the download is full on my computer 881MB
tried with diffrent kernel
any clues?
Click to expand...
Click to collapse
Are you familiar with Aroma install ? It's good & bad too
Hearmeman said:
I Need a rooted GB?
Click to expand...
Click to collapse
Try to flash STOCK Non-rooted GB ROM , for example http://hotfile.com/dl/141781856/f226b7d/N7000XXLA3_N7000OXALA3_OXA.rar.html
Hope you fix your problem.
Hearmeman said:
I Need a rooted GB?
Click to expand...
Click to collapse
For the moment, you don't need a root ROM, all you need is that your GNote can boot into download mode (hold vol- and power and home button [the button in the middle] for about 8 sec until the Samsung Galaxy Note logo shows up, then you could release the button)
You can download a stock GB from http://samfirmware.com/
I recommend a wipe version.
Then flash it using Odin PC (no increase of the binary counter because it's a stock ROM),
And then you can root it using any method you want (for gingerbread). Now you can flash any ROM you want by following OP's instructions
Hearmeman said:
I Need a rooted GB?
Click to expand...
Click to collapse
You can try pre-rooted stock GB. Try searching for Doc Ketan's thread on this forum. He has those links + the instructions on how to downgrade it.
Cheers!
simplelife said:
Are you familiar with Aroma install ? It's good & bad too
Click to expand...
Click to collapse
quite good flashed a few roms
sometimes getting stuck
Seyhan60 said:
For the moment, you don't need a root ROM, all you need is that your GNote can boot into download mode (hold vol- and power and home button [the button in the middle] for about 8 sec until the Samsung Galaxy Note logo shows up, then you could release the button)
You can download a stock GB from http://samfirmware.com/
I recommend a wipe version.
Then flash it using Odin PC (no increase of the binary counter because it's a stock ROM),
And then you can root it using any method you want (for gingerbread). Now you can flash any ROM you want by following OP's instructions
Click to expand...
Click to collapse
ok thank you
But i cant download from that site
can you give a link to the firmware as a direct download?
Hearmeman said:
quite good flashed a few roms
sometimes getting stuck
ok thank you
But i cant download from that site
can you give a link to the firmware as a direct download?
Click to expand...
Click to collapse
linkenhtc said:
Try to flash STOCK Non-rooted GB ROM , for example http://hotfile.com/dl/141781856/f226b7d/N7000XXLA3_N7000OXALA3_OXA.rar.html
Hope you fix your problem.
Click to expand...
Click to collapse
Here it is.Just read
linkenhtc said:
Here it is.Just read
Click to expand...
Click to collapse
Oh sorry sorry :silly:
Gone back to GB
Rooted it
installed cwm
Tried to install
and still not a bloody clue
its might be the rom itself right?
What error do you get?
Or is it the same problem: the phone still doesn't boot ? Stuck on Samsung Galaxy Note boot logo?
Is your device under warranty?
Go To Recovery And Wipe Cache/Dalvik And Reboot

What did I do and how do I fix it?

Hey fellas,
So here's what I was trying to do...I was simply trying to revert back to a previous ROM that I had made a back up of. As I tried to load up the back up I got an error. Tried another back up...same thing. Tried to simply reboot my phone, stuck at the Samsung logo. I can get into recovery and I tried to use the USB mount to see if I could put a freshly downloaded ROM to try onto the phone, no dice (computer never saw the phone, best I can tell).
Am I screwed, or is this a simple matter of putting a ROM on through Odin to get me back on track? Any help is appreciated. Thanks.
what error? what rom where you on and we're you trying to do a nandroid restore?
odin is safe and can be done to revert to stock rom easily as a last resort but for now explain with details
nokiamodeln91 said:
what error? what rom where you on and we're you trying to do a nandroid restore?
odin is safe and can be done to revert to stock rom easily as a last resort but for now explain with details
Click to expand...
Click to collapse
Sorry for the lack of details, a delivery driver showed up as I was typing away.
I was on: PACman http://forum.xda-developers.com/showthread.php?t=1999908
Tried restoring: TW Minitab http://forum.xda-developers.com/showthread.php?t=1968561
as well as a back up of the ROM that's not to be mentioned here.
The error was a loading error, if I'm remembering right. I'll grab my phone and double check right away. And yes, Nandroid restore.
"Error while restoring /system!"
That's the error I'm receiving.
hmmm.. what does it say in the logs
go to advanced and show logs
I: Checking for extendedcommand...
I: Skipping exection of extendedcommand, file not found...
I: Can't partition unsafe device: /dev/block/mmcb1k1p1
I: Can't format unknown volume: /external_sd
Ok then flash the stock rom using odin and if ics, install a safe kernel and the flash any custom rom you want.
Damn this thing happened to me too You're probably hard-bricked
kzshantonu said:
Damn this thing happened to me too You're probably hard-bricked
Click to expand...
Click to collapse
Hope not. Need it for work.
nokiamodeln91 said:
Ok then flash the stock rom using odin and if ics, install a safe kernel and the flash any custom rom you want.
Click to expand...
Click to collapse
Are the steps needed in the Dr. Ketan (sp?) thread?
Thanks for the help
yes all in there. nothing very hard to too. download the rom. open odin, and select the rom in pda tab. put phone in download mode and connect to PC. Flash it. If you choose ics, do not wipe till you install a safe kernel.
you can install philz kernel as per the rom you installed and then wipe.
nokiamodeln91 said:
yes all in there. nothing very hard to too. download the rom. open odin, and select the rom in pda tab. put phone in download mode and connect to PC. Flash it. If you choose ics, do not wipe till you install a safe kernel.
you can install philz kernel as per the rom you installed and then wipe.
Click to expand...
Click to collapse
Sorry to be a pain, man...but could you point me to the proper thread? Search is being a b!tch for me. Not sure if it's my crappy internet or just because I'm using a phone to search. Thanks again, really appreciate the help.
ROM and Odin: http://forum.xda-developers.com/showthread.php?t=1424997
Philz Kernel: http://forum.xda-developers.com/showthread.php?t=1901191
nokiamodeln91 said:
ROM and Odin: http://forum.xda-developers.com/showthread.php?t=1424997
Philz Kernel: http://forum.xda-developers.com/showthread.php?t=1901191
Click to expand...
Click to collapse
Thanks, man. Using my old Archos 5 at work today for messaging just doesn't cut it.
Ok,, let us know how it goes. see ya
Finally have some time to give this a go now, but I don't see a Canadian ROM on there. Does it matter which I use, or can I just grab a random since I'll be flashing something else eventually anyway?
Got it working again. Thanks for all your help, man!
great..

[Q] need urgent help! bricked it

hey eveyone!
my device is galaxy s advance gt-i9070 on which i was using cutom rom aicp 3.5 nightly (4.4.2 kitkat) with minor bugs and cwm recovery 6.0.4.7
i decided to switch to paranoid android 3.69 for smoother perfomance but sadly i bricked my device. although i had backed up my rom using cwm recovery on sd card. but the most sad part is that even recovery is not working. it just reboots again and again. someone told me to flash stock firmware via odin as the download mode is working. but i am worried that my data will be lost. can anyone tell me my data will be lost or not????
and if it ll lost than any way to save it or recover it/ ? i had extremely precious data in it. but being careless i didnt backed my personal data in my laptop.. please help me guys.. ready to pay any cost for my data
shivamgaba22 said:
hey eveyone!
my device is galaxy s advance gt-i9070 on which i was using cutom rom aicp 3.5 nightly (4.4.2 kitkat) with minor bugs and cwm recovery 6.0.4.7
i decided to switch to paranoid android 3.69 for smoother perfomance but sadly i bricked my device. although i had backed up my rom using cwm recovery on sd card. but the most sad part is that even recovery is not working. it just reboots again and again. someone told me to flash stock firmware via odin as the download mode is working. but i am worried that my data will be lost. can anyone tell me my data will be lost or not????
and if it ll lost than any way to save it or recover it/ ? i had extremely precious data in it. but being careless i didnt backed my personal data in my laptop.. please help me guys.. ready to pay any cost for my data
Click to expand...
Click to collapse
Flashing stock firmware with Odin will not delete your data from SD card. You will probably need to do factory reset, it will delete your contacts, sms, apps... But stuff from internal and external sd will remain there.
You bricked it because 4.4.2 uses preload partition for a swap, and it is partitioned in different way. And on PA 3.69 is probably different.
Or ROM zip of PA was corrupted.
thankyou and one more question
shut_down said:
Flashing stock firmware with Odin will not delete your data from SD card. You will probably need to do factory reset, it will delete your contacts, sms, apps... But stuff from internal and external sd will remain there.
You bricked it because 4.4.2 uses preload partition for a swap, and it is partitioned in different way. And on PA 3.69 is probably different.
Or ROM zip of PA was corrupted.
Click to expand...
Click to collapse
thanx a lot buddy now i can flash it being tension free. but can you tell me the way to flash PA without bricking /????
shivamgaba22 said:
thanx a lot buddy now i can flash it being tension free. but can you tell me the way to flash PA without bricking /????
Click to expand...
Click to collapse
I did not use that version that you used. I think that you will not have a problem when you install it over stock, I explained you why you had problem when you did it over CM11.
Sent from my GT-I9070 using Tapatalk
Thanx a lot
Everything fine now with all data restored..
Once again thnx buddy
Sent from my GT-I9070 using XDA Premium 4 mobile app
Hi
I 've bricked my phone as i was trying to clear cache 'n partition of my rooted phone. I assume it must have cleared the software as well.
i'm trying to flash it via odin but it is showin FAIL. i'm putting a pda .md5 file from sammobile 'n it's still not working. pl help.
Neo2803 said:
Hi
I 've bricked my phone as i was trying to clear cache 'n partition of my rooted phone. I assume it must have cleared the software as well.
i'm trying to flash it via odin but it is showin FAIL. i'm putting a pda .md5 file from sammobile 'n it's still not working. pl help.
Click to expand...
Click to collapse
You can't brick phone with clearing cache. Did you wipe system partition? Try to install same ROM that you had (if you had).
Give us a screenshot of Odin fail. What exactly happen. And what is the full name of md5 that you put in pda of Odin. Try different version of Odin too.
shut_down said:
You can't brick phone with clearing cache. Did you wipe system partition? Try to install same ROM that you had (if you had).
Give us a screenshot of Odin fail. What exactly happen. And what is the full name of md5 that you put in pda of Odin. Try different version of Odin too.
Click to expand...
Click to collapse
Yes, i did wipe system partition. Should i have not done that ???????/
Name of md5 - I9070DDULP8_I9070ODDULP8_HOME.tar.md5 .. Can you suggest another one ?
I did have a ROM named light JB which i found here only. Its location showthread.php?t=2244441.
pl guide future course of action.
TIA.
Neo2803 said:
Yes, i did wipe system partition. Should i have not done that ???????/
Name of md5 - I9070DDULP8_I9070ODDULP8_HOME.tar.md5 .. Can you suggest another one ?
I did have a ROM named light JB which i found here only. Its location showthread.php?t=2244441.
pl guide future course of action.
TIA.
Click to expand...
Click to collapse
Go back to recovery, and if you have ROMs zip install it again.
Ofcourse you shouldn't wipe system partition, system files are there...
And if you can't install ROM again, what error do you get in Odin?
shut_down said:
Go back to recovery, and if you have ROMs zip install it again.
Ofcourse you shouldn't wipe system partition, system files are there...
And if you can't install ROM again, what error do you get in Odin?
Click to expand...
Click to collapse
I didn't think twice before wiping it. My bad.
Anyways, That's the issue. I can't go to recovery. Phone only shows the odin mode (if i press VOL. DOWN+HOME+POWER).
Odin simply says FAILS.
Neo2803 said:
I didn't think twice before wiping it. My bad.
Anyways, That's the issue. I can't go to recovery. Phone only shows the odin mode (if i press VOL. DOWN+HOME+POWER).
Odin simply says FAILS.
Click to expand...
Click to collapse
Well then you did not just wipe system, you installed some GB based ROM over?
You have log window in Odin, where it fails? Try to redownlaod firmware again, and then install again.
What version of Odin do you use? Try 3.x.
shut_down said:
Well then you did not just wipe system, you installed some GB based ROM over?
You have log window in Odin, where it fails? Try to redownlaod firmware again, and then install again.
What version of Odin do you use? Try 3.x.
Click to expand...
Click to collapse
Odin Version - 3.07
I'm not sure it s GB based ROM and neither if it's JB. Can you take some more pain 'n send me a proper link ? please.
My older custom ROM is http://forum.xda-developers.com/showthread.php?t=2244441 - http://d-h.st/vge
Neo2803 said:
Odin Version - 3.07
I'm not sure it s GB based ROM and neither if it's JB. Can you take some more pain 'n send me a proper link ? please.
Click to expand...
Click to collapse
But it should be the same:
http://terafile.co/222154239129/INU-I9070DDULP8-20130412134604.zip
http://rapidgator.net/file/0a25225062db04ba2c8216cca12972d2
Check the file zize of zip when you download it, it should be 425MB.
shut_down said:
But it should be the same:
http://terafile.co/222154239129/INU-I9070DDULP8-20130412134604.zip
http://rapidgator.net/file/0a25225062db04ba2c8216cca12972d2
Check the file zize of zip when you download it, it should be 425MB.
Click to expand...
Click to collapse
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Neo2803 said:
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Click to expand...
Click to collapse
ROM is fine. And you was on GB or JB before? If you was on GB then this problem you got is normal. You must be on JB (flash JB firmware) if you install JB ROM.
And again, if you get FAIL on Odin DO A SCREENSHOT AND POST IT HERE. To see what cause that fail. Left part of this screenshot is a log http://4.bp.blogspot.com/-gkWcapOu2...gingerbread+s5570jpq8+samsung+galaxy+Mini.jpg
Blue, where it says Message.
This is for other phone, do not pay attention on that, I just told you what I need to see.
---------- Post added at 11:28 AM ---------- Previous post was at 11:02 AM ----------
Neo2803 said:
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Click to expand...
Click to collapse
And no, you must install Firmware not, not ROM. Because you probably installed JB ROM over GB. That is why you do not have working recovery.
Finally unbricked !!!
shut_down said:
ROM is fine. And you was on GB or JB before? If you was on GB then this problem you got is normal. You must be on JB (flash JB firmware) if you install JB ROM.
[/COLOR]
And no, you must install Firmware not, not ROM. Because you probably installed JB ROM over GB. That is why you do not have working recovery.
Click to expand...
Click to collapse
Finallyyyyyyy !!! yipppieee !!! I'm able to flash my phone with a JB Firmware. I shall be more careful in future.
http://i.imgur.com/UMv2kgs.png
http://i.imgur.com/WPP6yqs.png?1
Thanks a tonnnnn shut_down :good:: God bless you.

SOLVED [Q] Please Help! Soft Bricked Gt-N7000 stuck in boot loop

Hello, i recently tried to flash the C-Rom on my gt n7000, but i keep getting the tmp/sideload/package.zip (status 7) error, now my phone is stuck in bootloop. i read that i need to flash a stock rom but my charging port has been damaged as such i cant connect the phone to my computer to use Odin. Is there a stock rom that can be flashed through recovery?
annie22 said:
Hello, i recently tried to flash the C-Rom on my gt n7000, but i keep getting the tmp/sideload/package.zip (status 7) error, now my phone is stuck in bootloop. i read that i need to flash a stock rom but my charging port has been damaged as such i cant connect the phone to my computer to use Odin. Is there a stock rom that can be flashed through recovery?
Click to expand...
Click to collapse
You came so far, its to late to turn back...
If only you had read the instructions...
Then you would know...
That you need a more recent version of your recovery...
Which is part of a kernel...
So flash raw kernel...
And then flash C-Rom...
annie22 said:
Hello, i recently tried to flash the C-Rom on my gt n7000, but i keep getting the tmp/sideload/package.zip (status 7) error, now my phone is stuck in bootloop. i read that i need to flash a stock rom but my charging port has been damaged as such i cant connect the phone to my computer to use Odin. Is there a stock rom that can be flashed through recovery?
Click to expand...
Click to collapse
To Flash ANY/ALL KK Based Roms (4.4+) you need base recovery 0f 6.0.4.4+. Can you still reboot to recovery? What rom vers are you previously on? Rooted? What recovery? If your charging port has been damaged, how are you gonna charge your phone? Get it repaired ASAP before doing anything else. Loss of battery during Rom flashing can make your phone a nice desk decoration.
Jackwu696 said:
To Flash ANY/ALL KK Based Roms (4.4+) you need base recovery 0f 6.0.4.4+. Can you still reboot to recovery? What rom vers are you previously on? Rooted? What recovery? If your charging port has been damaged, how are you gonna charge your phone? Get it repaired ASAP before doing anything else. Loss of battery during Rom flashing can make your phone a nice desk decoration.
Click to expand...
Click to collapse
Yes i can boot to recovery, thats all my phone does is load with the Samsung boot logo then the recovery screen. Im on the offical samsung stock rom. Yes its rooted.CWM, I use a universal battery charger, the battery was full before i tried flasing the C-Rom.
annie22 said:
Yes i can boot to recovery, thats all my phone does is load with the Samsung boot logo then the recovery screen. Im on the offical samsung stock rom. Yes its rooted.CWM, I use a universal battery charger, the battery was full before i tried flasing the C-Rom.
Click to expand...
Click to collapse
Do you still remember your Stock Rom's Build number? If yes, then you can try downloading philz safe kernel with recovery that is compatible with your build number, flash it in cwm recovery, then reboot to RECOVERY, from there do a factory reset wipe, all formats (system, data, cache, preload) wipe dalvik cache (If you don't understand any of the terms I mentioned above, please go to philz page and read) and Flash a TW BASED custom rom first (you can find and download any rom as long as it's TW based). See if that boots.
Ultimately you WILL need that charging/USB Port fixed so please make that a TOP Priority
Azeazezar said:
You came so far, its to late to turn back...
If only you had read the instructions...
Then you would know...
That you need a more recent version of your recovery...
Which is part of a kernel...
So flash raw kernel...
And then flash C-Rom...
Click to expand...
Click to collapse
I read the entire C-ROM tutorial, before doing anything.
Jackwu696 said:
Do you still remember your Stock Rom's Build number? If yes, then you can try downloading philz safe kernel with recovery that is compatible with your build number, flash it in cwm recovery, then reboot to RECOVERY, from there do a factory reset wipe, all formats (system, data, cache, preload) wipe dalvik cache (If you don't understand any of the terms I mentioned above, please go to philz page and read) and Flash a TW BASED custom rom first (you can find and download any rom as long as it's TW based). See if that boots.
Ultimately you WILL need that charging/USB Port fixed so please make that a TOP Priority
Click to expand...
Click to collapse
No i dont remember it...
annie22 said:
No i dont remember it...
Click to expand...
Click to collapse
Then I suggest you fix that port so you can use odin, otherwise follow @Azeazezar advice
annie22 said:
I read the entire C-ROM tutorial, before doing anything.
Click to expand...
Click to collapse
Follow these instructions.
Azeazezar said:
Follow these instructions.
Click to expand...
Click to collapse
Ohh, , okay will do.
@annie22 you could also download any JB kernel (if you were on JB) of philz and flash it in recovery, reboot recovery, then flash Raw kernel r4 or r5 and reboot recovery and from there flash C-Rom or any other KK rom. You can use any philz kernel irrespective of the build number as long as you are using it only to flash another kernel and then rom of your choice. Make sure to download the .zip version of the philz kernel and put that and raw kernel and rom on external sd card. Keep back up of these kernels and roms on pc as well so that you can connect memory card to pc and transfer those files back to card, as it so happened that i while doing full wipe on philz kernel it also wiped my external card.
treacherous_hawk said:
@annie22 you could also download any JB kernel (if you were on JB) of philz and flash it in recovery, reboot recovery, then flash Raw kernel r4 or r5 and reboot recovery and from there flash C-Rom or any other KK rom. You can use any philz kernel irrespective of the build number as long as you are using it only to flash another kernel and then rom of your choice. Make sure to download the .zip version of the philz kernel and put that and raw kernel and rom on external sd card. Keep back up of these kernels and roms on pc as well so that you can connect memory card to pc and transfer those files back to card, as it so happened that i while doing full wipe on philz kernel it also wiped my external card.
Click to expand...
Click to collapse
Hi, thanks. Excuse my slowness but Umm could you direct me to the link please, I've been searching and feel I'm going around in circles, I see the thread for philz but no download link..
annie22 said:
Hi, thanks. Excuse my slowness but Umm could you direct me to the link please, I've been searching and feel I'm going around in circles, I see the thread for philz but no download link..
Click to expand...
Click to collapse
You should be able to flash raw kernel from just about any custom recovery. Just skip philz
Azeazezar said:
You should be able to flash raw kernel from just about any custom recovery. Just skip philz
Click to expand...
Click to collapse
Problem is, both r4 n r5 download links are dead... do u know any mirror? I'd like to keep a copy of r5 too just in case I need TWRP.
Sent from my GT-N7000 using XDA Free mobile app
Jackwu696 said:
Problem is, both r4 n r5 download links are dead... do u know any mirror? I'd like to keep a copy of r5 too just in case I need TWRP.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
The links work fine here.
If you have trouble I could send you a copy.
Azeazezar said:
The links work fine here.
If you have trouble I could send you a copy.
Click to expand...
Click to collapse
Yes I'd really like that mate. Gonna DL it 1st thing tomorrow. Just the raw5 will do. Thanks again for your trouble
Sent from my GT-N7000 using XDA Free mobile app
annie22 said:
Hi, thanks. Excuse my slowness but Umm could you direct me to the link please, I've been searching and feel I'm going around in circles, I see the thread for philz but no download link..
Click to expand...
Click to collapse
Can't search, Can't help.
annie22 said:
Hi, thanks. Excuse my slowness but Umm could you direct me to the link please, I've been searching and feel I'm going around in circles, I see the thread for philz but no download link..
Click to expand...
Click to collapse
if you r on cwm based or any custom recovery
goto android development page download forest cm11 kernel and flash it have latest philz recovery
if you are on stock
then
got original android development page >philz*******>download odin flashable md5> flash>install forestcm11 kernel> install c rom or any other
i dont know why u people search for single when you have an alternate
thanks to @forest1971
Flash success!!!! Bricked no more.
Just wanted to say thank you to everyone for all the advice, I was finally able to flash the philz jb kernel and then install the latest version, then iinstall C rom. YAAAAAY!!!!!! Phone is now fully functional
annie22 said:
Just wanted to say thank you to everyone for all the advice, I was finally able to flash the philz jb kernel and then install the latest version, then iinstall C rom. YAAAAAY!!!!!! Phone is now fully functional
Click to expand...
Click to collapse
Glad to hear that, Remember to change your thread by adding [SOLVED] to let others know and also as reference to others facing the same problem.
---------- Post added at 07:14 AM ---------- Previous post was at 07:14 AM ----------
annie22 said:
Just wanted to say thank you to everyone for all the advice, I was finally able to flash the philz jb kernel and then install the latest version, then iinstall C rom. YAAAAAY!!!!!! Phone is now fully functional
Click to expand...
Click to collapse
Glad to hear that, Remember to change your thread title by adding [SOLVED] to let others know and also as reference to others facing the same problem.

Categories

Resources