I Rooted my Atrix HD and downloaded BusyBox. BusyBox app asked me to reboot, so I did. The phone shut off, went to boot and stayed there. I have tried to Fastboot back to the original firmware with no luck. Can someone help me please?? Thanks a million!
What is wrong with fastboot flash using rsd?
Sent from my MB886 using Tapatalk 2
SirHoover2010 said:
What is wrong with fastboot flash using rsd?
Sent from my MB886 using Tapatalk 2
Click to expand...
Click to collapse
RSD finds my phone and everything but as soon as I load the firmware and hit start it instantly says Failed. I'm not sure whats up with that.
Do you have low battery? Do you have a different computer you can try? Have you tried deleting your drivers out (for your phone) and completely reinstalling them?
Sent from my MB886 using Tapatalk 2
SirHoover2010 said:
Do you have low battery? Do you have a different computer you can try? Have you tried deleting your drivers out (for your phone) and completely reinstalling them?
Sent from my MB886 using Tapatalk 2
Click to expand...
Click to collapse
Battery is good and I tried deleting all of the drivers twice with no luck. Haven't tried a different computer yet, let me try that and see what happens.
SirHoover2010 said:
Do you have low battery? Do you have a different computer you can try? Have you tried deleting your drivers out (for your phone) and completely reinstalling them?
Sent from my MB886 using Tapatalk 2
Click to expand...
Click to collapse
Tried it on a different computer, it got a little bit further but not much. It now says Fastboot command failed. Unknown fastboot command [getvar.]
I use to have same problem. send it back to Motorola for repair. sometimes these phones get stuck in loop.
raydm said:
I use to have same problem. send it back to Motorola for repair. sometimes these phones get stuck in loop.
Click to expand...
Click to collapse
I didn't know that until I called AT&T. Apparently the Atrix HD can get stuck in a boot loop even without it being rooted. Anyway AT&T is sending me a new phone. Should be here tomorrow. So everything is all good! Thanks!
BigJewy said:
It now says Fastboot command failed. Unknown fastboot command [getvar.]
Click to expand...
Click to collapse
edit the XML file in the zip to remove the two lines that reference "getvar". then flash.
Related
Hi
A friend of my messed up his droid 4. He updated to ICS but something went wrong and the phone is dead. After that he put somes sbf that he didnt remember.
The phone when come to me had the screen in Fastboot Failure. I put the VRZ_XT894_6.7.2-180_DR4-16_M2-37_1FF with the ICS Tool and with RSD and i fix that error but the phone stuck in black screen after the motorola logo.
I think that the phone inside has some files of the last update 217. I tried to install the update trought the stock recovery but didnt let me.
I tried to open the system.img of the 180 putting the files of the 217 but when i flashed gives me errors and stucked in fastboot failure.
Is there a way to put the latest updates files on the sbf 180? I can flash only trought rsd or fastboot.
Sorry for my bad english.
Try to flash in fastboot mode full stock 4.0.4 using rsd lite, then go again to fastboot mode, do fastboot -w command and let us know
Sent from my XT894 using xda premium
olegfusion said:
Try to flash in fastboot mode full stock 4.0.4 using rsd lite, then go again to fastboot mode, do fastboot -w command and let us know
Sent from my XT894 using xda premium
Click to expand...
Click to collapse
I did it but it is the same error. Black screen after motorola logo. I think that the phone is totally bricked.
Have you tried wiping data?? I had a similar issue for a while, it turned out it was mismatching settings or something.
Sent from my ASUS Transformer Pad TF700T using xda premium
moah909 said:
Have you tried wiping data?? I had a similar issue for a while, it turned out it was mismatching settings or something.
Sent from my ASUS Transformer Pad TF700T using xda premium
Click to expand...
Click to collapse
I tried that but no luck.
any fix? im in the same boat. black screen after moto logo
Hmm I dont believe its a hard brick but just a soft brick caused by flashing the wrong sbf which left you in this state
Try downloading the sbf tool
http://www.droidforums.net/forum/droid-4-hacks/217255-droid-4-utility-ics-only.html
FOLLOW THE DIRECTIONS AS YOU WILL HAVE TO DOWNLOAD THE PROPER SBF AND PLACE THE FILES IN THE TOOL
6 months later the Droid 4 is ALIVE!!!
I flash to jellybean with this utility:
http://forum.xda-developers.com/showthread.php?t=2207384
Thanks
OMGOGOMOGMOGM SOMEONE PLEASE HELP
I just flashed the aokp rom http://forum.xda-developers.com/showthread.php?t=2250601&page=12 with safestrap recovery thing a majiger cant remember the name of it but anyway, i flashed it and when i tapped reboot it comes up with a black screen showing this format
Invalid flash mode (s)
10..9b(*) (sha-5b08bc, 2012-12-03:10:39)
eMMC info: size 8gb
Device is LOCKED, Status code: 0
Battery Low:
Transfer Mode:
USB connected
Failed to hab check for boot: 0x56
Fastboot Reason: Boot Failure
usb Connected
This is exactly whats on my screen right now and its scaring the hell out of me, SOMEONE PLEASE HELP I DID EVERY INSTRUCTION TO FLASHING THE ROM WITH THE RECOVERY IM USING AND THIS HAPPENED.
:crying ::crying: :crying: :crying: :crying: :crying: :crying: :crying: :crying: :crying:
Face palm man. You need an unlocked bootloader for that rom says so in the info so you clearly didn't follow directions like you said to such as using cwm not safestrap. This is why we must read before acting hastily. You may be able to use rsd to flash stock but don't count on it.
Sent from my PACMAN MATRIX HD MAXX
deeje00 said:
Face palm man. You need an unlocked bootloader for that rom says so in the info so you clearly didn't follow directions like you said to such as using cwm not safestrap. This is why we must read before acting hastily. You may be able to use rsd to flash stock but don't count on it.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
yea i was gonna say the same i also think new people see that safestrap thread thats stickied which is why they install ss and not cmw.
Sent from my MB886 using xda premium
This might help: http://forum.xda-developers.com/showthread.php?t=2231249
deeje00 said:
Face palm man. You need an unlocked bootloader for that rom says so in the info so you clearly didn't follow directions like you said to such as using cwm not safestrap. This is why we must read before acting hastily. You may be able to use rsd to flash stock but don't count on it.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
i actually have the same problem. My phone is unlocked before already, but the problem is i cant get in to any bootloader or fastboot or anything. I can only tell the phone is on when i plug to computer and rsdlite sees the device, but fails to flash anything because it is not in the fastboot mode...
do you know how i can figure this out?
legendnexus said:
i actually have the same problem. My phone is unlocked before already, but the problem is i cant get in to any bootloader or fastboot or anything. I can only tell the phone is on when i plug to computer and rsdlite sees the device, but fails to flash anything because it is not in the fastboot mode...
do you know how i can figure this out?
Click to expand...
Click to collapse
Did you flash a rom using Safestrap too?
audit13 said:
Did you flash a rom using Safestrap too?
Click to expand...
Click to collapse
is it a right source to try?
http://forum.xda-developers.com/showthread.php?t=1995220
legendnexus said:
is it a right source to try?
http://forum.xda-developers.com/showthread.php?t=1995220
Click to expand...
Click to collapse
That thread is for locked bootloaders. Do you have a locked bootloader? Did you flash a rom using safestrap?
Did you try this? http://forum.xda-developers.com/showthread.php?t=2231249
Or this? http://forum.xda-developers.com/showthread.php?t=2262726
audit13 said:
That thread is for locked bootloaders. Do you have a locked bootloader? Did you flash a rom using safestrap?
Did you try this? http://forum.xda-developers.com/showthread.php?t=2231249
Or this? http://forum.xda-developers.com/showthread.php?t=2262726
Click to expand...
Click to collapse
Yeah i unlocked the bootloader before. so it seems like useless for my case. Plus i cant even boot into fastboot mode, how am i gonna install it lol
And as I said before; the problem is i cant get in to any bootloader or fastboot or anything. I can only tell the phone is on when i plug to computer and rsdlite sees the device, but fails to flash anything because it is not in the fastboot mode.
I tried both methods but they both fail where the phone need to be in fastboot mode, which is apparently not happening...
legendnexus said:
Yeah i unlocked the bootloader before. so it seems like useless for my case. Plus i cant even boot into fastboot mode, how am i gonna install it lol
And as I said before; the problem is i cant get in to any bootloader or fastboot or anything. I can only tell the phone is on when i plug to computer and rsdlite sees the device, but fails to flash anything because it is not in the fastboot mode.
I tried both methods but they both fail where the phone need to be in fastboot mode, which is apparently not happening...
Click to expand...
Click to collapse
Damn, seems like those are the only two methods that could work.
The good thing is that you can't re-lock the bootloader.
You might want to send a PM to skeevy to see if he can help.
Is there any warranty left on your phone? I've seen posts where people were able to go back to AT&T to exchange the phone or send it in for repair.
legendnexus said:
Yeah i unlocked the bootloader before. so it seems like useless for my case. Plus i cant even boot into fastboot mode, how am i gonna install it lol
And as I said before; the problem is i cant get in to any bootloader or fastboot or anything. I can only tell the phone is on when i plug to computer and rsdlite sees the device, but fails to flash anything because it is not in the fastboot mode.
I tried both methods but they both fail where the phone need to be in fastboot mode, which is apparently not happening...
Click to expand...
Click to collapse
How have you tried to get into fastboot? Try turning your phone off, hold both volume buttons and press the power button a few times then use volume down to scroll to "ap fastboot" and use volume up to select.
Sent from my MB886 using Tapatalk
When you plug in the phone to charge do you see at least the boot logo?
may need to connect pins 1 & 4 together in micro usb charger port to phone within the plug itself and it will charge.
Swiftb12305 said:
yea i was gonna say the same i also think new people see that safestrap thread thats stickied which is why they install ss and not cmw.
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
I feel like it's causing more problems than it's solving with new people that try to flash their phones, they see light at the end of the tunnel and assume it's the exit, when in fact it's a dadgum train.
legendnexus said:
Yeah i unlocked the bootloader before. so it seems like useless for my case. Plus i cant even boot into fastboot mode, how am i gonna install it lol
And as I said before; the problem is i cant get in to any bootloader or fastboot or anything. I can only tell the phone is on when i plug to computer and rsdlite sees the device, but fails to flash anything because it is not in the fastboot mode.
I tried both methods but they both fail where the phone need to be in fastboot mode, which is apparently not happening...
Click to expand...
Click to collapse
Have you tried a fastboot cable?
audit13 said:
Damn, seems like those are the only two methods that could work.
The good thing is that you can't re-lock the bootloader.
You might want to send a PM to skeevy to see if he can help.
Is there any warranty left on your phone? I've seen posts where people were able to go back to AT&T to exchange the phone or send it in for repair.
Click to expand...
Click to collapse
nope no warranty left..
penser said:
How have you tried to get into fastboot? Try turning your phone off, hold both volume buttons and press the power button a few times then use volume down to scroll to "ap fastboot" and use volume up to select.
Sent from my MB886 using Tapatalk
Click to expand...
Click to collapse
exactly the same way you wrote. but unfortunately it doesnt work.
SVLAN said:
When you plug in the phone to charge do you see at least the boot logo?
Click to expand...
Click to collapse
ahahaha nothing!! no single pixel power up, forget about the logo lol
HD-man said:
may need to connect pins 1 & 4 together in micro usb charger port to phone within the plug itself and it will charge.
Click to expand...
Click to collapse
anthony2424 said:
Have you tried a fastboot cable?
Click to expand...
Click to collapse
I research on that i guess fasboot cable is connecting the pins 1 & 4 together in micro usb cable. I tried that too, however result is the same.
doesnt work.
That was my last hope (fastboot cable), so i even try other combinations connecting different pins together, but it didnt work too )))
I have a beautiful brick as you guys can understand.
I am thinking to order a broken lcd atrix hd online and replace the boards right now. Do you guys think it is logical?
or like replacing the storage with a used one.
I dont know what else to do, out of ideas
I am aware I haven't replied in a while, my atrix had a hardware issue, but I got a nexus 10!! Anyways, when plugging the phone in does the LED light up green?
Sent from my Nexus 10 using XDA Premium 4 mobile app
Nope, no lights
Sent from my Nexus 5 using Tapatalk
Hm sounds like a hardware issue, check the pins in the phones micro USB port if other cables don't make a the LED turn green while the phone is off.
Sent from my Nexus 10 using XDA Premium 4 mobile app
I just tried to flash 2nd booltloader and tarp recovery on my 7". I went to reboot into recovery one got a Bootloop. It flashes kindlefire for 5 seconds and then goes black for 5 seconds and on and on for about a minute and then shuts down. When I try fastboot my computers hang at and adb says no device. I searched the forum and googled and found nothing so I'm sorry if I missed the answer somewhere. I do have the drivers installed on my computer. I appreciate any help or advice
Sent from my LG-E970 using xda app-developers app
popshovit said:
I just tried to flash 2nd booltloader and tarp recovery on my 7". I went to reboot into recovery one got a Bootloop. It flashes kindlefire for 5 seconds and then goes black for 5 seconds and on and on for about a minute and then shuts down. When I try fastboot my computers hang at and adb says no device. I searched the forum and googled and found nothing so I'm sorry if I missed the answer somewhere. I do have the drivers installed on my computer. I appreciate any help or advice
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
Im haveing the same problem
Yeah I tried everything I know of so hopefully someone has a trick. I'm thinking about sending it for warranty but if they see it was rooted then I might be sol.
Sent from my LG-E970 using xda app-developers app
You say you got in in fast boot or that you were trying to from adb? Because if your trying to get it in fast boot your going to need a factory cable. From there once its in fast boot you plug it back in to your PC with the normal cable and run fastboot.exe -i 0x1949 getvar product
That should return Tate something. If that happens you should be able to fix it.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
I can't even get it in fastboot. I have the cable that it came with. maybe I'm nit doing something right. How should I do it with the factory cable. So far I've tried adb = device not found and fastboot = waiting for device
Sent from my LG-E970 using xda app-developers app
popshovit said:
I can't even get it in fastboot. I have the cable that it came with. maybe I'm nit doing something right. How should I do it with the factory cable. So far I've tried adb = device not found and fastboot = waiting for device
Sent from my LG-E970 using xda app-developers app
Click to expand...
Click to collapse
A factory cable puts kfhd7 in fast boot automatically, not the cable that comes with device,search eBay for Motorola factory cable around 4 euros
Thank you. I'll give this a try
Sent from my LG-E970 using xda app-developers app
fixed
So i ordered the factory which put it right into fastboot. downloaded kfhdsrt, restored system,boot,recovery and it booted up and is running great. thanks for the help. it as fixed within a half hour from when i got the factory cable in the mail :good:
I updated hboot to ICS and put WCXrecovery through Easy_Kernel_Flasher_v03, and now the phone is not activated and wants to enter the boot menu does not respond to exercise, PC sees it as QHSUSB_DLOAD. Please help me restore it work.
Mr.Fr0st1n said:
I updated hboot to ICS and put WCXrecovery through Easy_Kernel_Flasher_v03, and now the phone is not activated and wants to enter the boot menu does not respond to exercise, PC sees it as QHSUSB_DLOAD. Please help me restore it work.
Click to expand...
Click to collapse
You flashed a recovery though a kernel flasher... it flashed onto the wrong partition.. can you get to the bootloader?
bilibox said:
You flashed a recovery though a kernel flasher... it flashed onto the wrong partition.. can you get to the bootloader?
Click to expand...
Click to collapse
No, I can`t
Mr.Fr0st1n said:
No, I can`t
Click to expand...
Click to collapse
The only 2 things you can do are...
The HTC unbricking project... Find the thread in development...
Or...
Find someone to j-tag your phone
Sent from my Vivid 4G using Tapatalk 4 Beta
I need some serious help
rignfool said:
The only 2 things you can do are...
The HTC unbricking project... Find the thread in development...
Or...
Find someone to j-tag your phone
Sent from my Vivid 4G using Tapatalk 4 Beta
Click to expand...
Click to collapse
alright so my girls battery went completely dead. ordered a new one off ebay n cant even get to bootloader or pc to reconize it. it was ablle to get into bootloader before... barely though and with extreme luck n junk.. now with new battery been on charger for 24 or so (no light on though blinks at start or is just solid and shuts off). helppppppp! she borrowed a Huawei (junk phones lets say) n she needs her HTC back... havent been able to get into bootloader lately, but when i was in it it wouldnt factory reset or go into recovery to clear cache....
FordNate said:
alright so my girls battery went completely dead. ordered a new one off ebay n cant even get to bootloader or pc to reconize it. it was ablle to get into bootloader before... barely though and with extreme luck n junk.. now with new battery been on charger for 24 or so (no light on though blinks at start or is just solid and shuts off). helppppppp! she borrowed a Huawei (junk phones lets say) n she needs her HTC back... havent been able to get into bootloader lately, but when i was in it it wouldnt factory reset or go into recovery to clear cache....
Click to expand...
Click to collapse
Neither of those options would help you if you can get to fastboot you can flash the latest RUU and that would fix it but if you can get to fastboot I dont know what to tell you. :/
rignfool said:
The only 2 things you can do are...
The HTC unbricking project... Find the thread in development...
Or...
Find someone to j-tag your phone
Sent from my Vivid 4G using Tapatalk 4 Beta
Click to expand...
Click to collapse
The HTC unbricking project don't help me, because ubuntu can`t see my phone.
Mr.Fr0st1n said:
The HTC unbricking project don't help me, because ubuntu can`t see my phone.
Click to expand...
Click to collapse
Do you have ADB and Fastboot installed?
TheROMGuy said:
Neither of those options would help you if you can get to fastboot you can flash the latest RUU and that would fix it but if you can get to fastboot I dont know what to tell you. :/
Click to expand...
Click to collapse
Ok got her phone booted into fastboot n new battery charges. Was able to load twrp (gross BTW ) n it won't mount emmc at all. So for at&t what ruu is it n is it supposed to be an .exe format ?
Sent from my ADR6350 using xda app-developers app
FordNate said:
Ok got her phone booted into fastboot n new battery charges. Was able to load twrp (gross BTW ) n it won't mount emmc at all. So for at&t what ruu is it n is it supposed to be an .exe format ?
Sent from my ADR6350 using xda app-developers app
Click to expand...
Click to collapse
Will it mount it via USB?
if so... Format it with windows... And don't factory reset from fastboot
Sent from my Vivid 4G using Tapatalk 4
rignfool said:
Will it mount it via USB?
if so... Format it with windows... And don't factory reset from fastboot
Sent from my Vivid 4G using Tapatalk 4
Click to expand...
Click to collapse
Yes mounts via USB. Format with windows? Like open window n format g or I drive ? Yeah on my HP it pops up as 2 drives. I haven't factory reset from fastboot but is there an issue with that? Also after format do?
Sent from my ADR6350 using xda app-developers app
FordNate said:
Yes mounts via USB. Format with windows? Like open window n format g or I drive ? Yeah on my HP it pops up as 2 drives. I haven't factory reset from fastboot but is there an issue with that? Also after format do?
Sent from my ADR6350 using xda app-developers app
Click to expand...
Click to collapse
When you format them, format them to FAT32 because if you use NTFS it wont show. but you will need to unlock your bootloader check out Hansoon's AIO for the Vivid it's in the Development Thread. use that it will walk you through step-by-step then you need to chose a ROM you want and if your S-ON get the boot.img and via fastboot in cmd type fastboot flash boot boot.img whereever you have it placed at and then flash the ROM if your S-OFF then just flash the ROM in recovery if you dont know what S-OFF/ON is just flash the boot.img
Hi all, my life was good when i flashed the lolipop zip from rootjunky, but then i noticed that my homebutton wasnt working so i thought id just reflash it and move on no problem, but after i tried to reflash it i got errors, so i just tried to reboot it, and now i am stuck on the motorolla screen, i can get into fastboot and ive tried using his unbrick method, but im still having issues, if anyone can help me thatd be much appreciated.
Michaelmansour1997 said:
Hi all, my life was good when i flashed the lolipop zip from rootjunky, but then i noticed that my homebutton wasnt working so i thought id just reflash it and move on no problem, but after i tried to reflash it i got errors, so i just tried to reboot it, and now i am stuck on the motorolla screen, i can get into fastboot and ive tried using his unbrick method, but im still having issues, if anyone can help me thatd be much appreciated.
Click to expand...
Click to collapse
I had the same issue at first, but I rebooted and it worked fine. Did you try wiping cache after installing the zip? You may want to try a factory reset from recovery if wiping cache doesn't do anything.
Sent from my Droid Turbo using Tapatalk
zefir738 said:
I had the same issue at first, but I rebooted and it worked fine. Did you try wiping cache after installing the zip? You may want to try a factory reset from recovery if wiping cache doesn't do anything.
Sent from my Droid Turbo using Tapatalk
Click to expand...
Click to collapse
i did not wipe cache after initially installing the zip, i tried to unbrick it using rootjunky's unbricking guide but it didnt do anything, and i do not know if i can flash that file over usb, because i cannot load the zip onto the phone
Michaelmansour1997 said:
i did not wipe cache after initially installing the zip, i tried to unbrick it using rootjunky's unbricking guide but it didnt do anything, and i do not know if i can flash that file over usb, because i cannot load the zip onto the phone
Click to expand...
Click to collapse
Oh dear. That's a pickle.. I wish I could be more helpful :/
Sent from my Droid Turbo using Tapatalk
zefir738 said:
Oh dear. That's a pickle.. I wish I could be more helpful :/
Sent from my Droid Turbo using Tapatalk
Click to expand...
Click to collapse
no worries, hopefully someone can chime in with their solution
Michaelmansour1997 said:
no worries, hopefully someone can chime in with their solution
Click to expand...
Click to collapse
Have you attempted to ADB push the zip to your phone?
Sent from my Droid Turbo using Tapatalk
zefir738 said:
Have you attempted to ADB push the zip to your phone?
Sent from my Droid Turbo using Tapatalk
Click to expand...
Click to collapse
adb wont show up on my pc, do you think its because of usb3? what would be the command to push the update?
Michaelmansour1997 said:
adb wont show up on my pc, do you think its because of usb3? what would be the command to push the update?
Click to expand...
Click to collapse
Yeah, no computer I've ever used has recognized the Turbo when it's plugged into a USB 3 port, in fastboot mode and regularly booted. Try plugging it into a USB 2 port.
Sent from my Droid Turbo using Tapatalk
zefir738 said:
Yeah, no computer I've ever used has recognized the Turbo when it's plugged into a USB 3 port, in fastboot mode and regularly booted. Try plugging it into a USB 2 port.
Sent from my Droid Turbo using Tapatalk
Click to expand...
Click to collapse
http://gyazo.com/c5d1be6c5a88265bf13af3cbce30ce12 getting these errors when trying to unbrick using rootjunkys method
when i try to push it with adb it says device not found even on USB 2.0
Michaelmansour1997 said:
http://gyazo.com/c5d1be6c5a88265bf13af3cbce30ce12 getting these errors when trying to unbrick using rootjunkys method
Click to expand...
Click to collapse
Oops, I accidentally hit like on this post. Are you able to boot into bootloader at all? Or is it just stuck at the white Motorola logo?
Edit: oops, you are, just re-read OP. Have you tried the command to ADB push the update.zip to the phone, and then initiating the flash via ADB?
Sent from my Droid Turbo using Tapatalk
zefir738 said:
Oops, I accidentally hit like on this post. Are you able to boot into bootloader at all? Or is it just stuck at the white Motorola logo?
Edit: oops, you are, just re-read OP. Have you tried the command to ADB push the update.zip to the phone, and then initiating the flash via ADB?
Sent from my Droid Turbo using Tapatalk
Click to expand...
Click to collapse
i can get in the bootloader, but when i go to update via adb when i plug the phone into my pc nothing comes up when i show devices, in the command window.
zefir738 said:
Oops, I accidentally hit like on this post. Are you able to boot into bootloader at all? Or is it just stuck at the white Motorola logo?
Edit: oops, you are, just re-read OP. Have you tried the command to ADB push the update.zip to the phone, and then initiating the flash via ADB?
Sent from my Droid Turbo using Tapatalk
Click to expand...
Click to collapse
My pc for some reason cant see the phone in adb
http://gyazo.com/84cfc34a9a6bd74e53f7b74e5cb783f1
Michaelmansour1997 said:
My pc for some reason cant see the phone in adb
Click to expand...
Click to collapse
When trying to connect via ADB, are you in recovery or fastboot mode?
Sent from my Droid Turbo using Tapatalk
zefir738 said:
When trying to connect via ADB, are you in recovery or fastboot mode?
Sent from my Droid Turbo using Tapatalk
Click to expand...
Click to collapse
recovery
Michaelmansour1997 said:
recovery
Click to expand...
Click to collapse
Hm.... Unfortunately I'm out of ideas at the moment. I'm gonna get some shuteye, it's almost 3 AM here on the east coast. I'm gonna revisit this thread in the morning and see if I can get more ideas, but I hope you are able to get this sorted out before then! If you are, please PM me and let me know. I wish you the best of luck, señor.
Sent from my Droid Turbo using Tapatalk
zefir738 said:
Hm.... Unfortunately I'm out of ideas at the moment. I'm gonna get some shuteye, it's almost 3 AM here on the east coast. I'm gonna revisit this thread in the morning and see if I can get more ideas, but I hope you are able to get this sorted out before then! If you are, please PM me and let me know. I wish you the best of luck, señor.
Sent from my Droid Turbo using Tapatalk
Click to expand...
Click to collapse
I think i may have got it, there are a different set of drivers needed for the recovery adb than what come in the box from the motorolla driver suite, right now the file is being pushed using adb, fingers crossed!
After it pushed it said that something was wrong with an exsisting apk and it aborted
Michaelmansour1997 said:
I think i may have got it, there are a different set of drivers needed for the recovery adb than what come in the box from the motorolla driver suite, right now the file is being pushed using adb, fingers crossed!
After it pushed it said that something was wrong with an exsisting apk and it aborted
Click to expand...
Click to collapse
Did it specify which apk? Which file did you try to push? If it was the Lollipop zip, what was the file size? Girlfriend's snoring so I'm having trouble sleeping, may be with you a bit longer than expected ?
Sent from my Droid Turbo using Tapatalk
zefir738 said:
Did it specify which apk? Which file did you try to push? If it was the Lollipop zip, what was the file size? Girlfriend's snoring so I'm having trouble sleeping, may be with you a bit longer than expected
Sent from my Droid Turbo using Tapatalk
Click to expand...
Click to collapse
"3c_main.apk has unexpected contents" i was pushing lolipop zip file size is 789mb
Michaelmansour1997 said:
"3c_main.apk has unexpected contents" i was pushing lolipop zip file size is 789mb
Click to expand...
Click to collapse
Hm..what command are you using to push the file? adb push /path/to/local/file /mnt/sdcard/path/to/file? Maybe try redownloading the file and pushing the newly downloaded one? The file size sounds right to me, unfortunately I can't compare it to mine because I deleted it after making sure my install went smoothly xP
Sent from my Droid Turbo using Tapatalk
zefir738 said:
Hm..what command are you using to push the file? adb push /path/to/local/file /mnt/sdcard/path/to/file? Maybe try redownloading the file and pushing the newly downloaded one? The file size sounds right to me, unfortunately I can't compare it to mine because I deleted it after making sure my install went smoothly xP
Sent from my Droid Turbo using Tapatalk
Click to expand...
Click to collapse
im just using "adb sideload Blur_Version.21.44.12.quark_verizon.verizon.en.US.zip" , what should i use