Database Develop

[Q] Currently unable to install any rom

Hi guys,
Current situation
I haven't been able to use my phone for a good day now and I been busy reading guides, trying out stuff for a bunch of hours now. I thought it was time to ask you guys. Currently this is the only thing I'm able to do:
When I boot normally its stuck on the black screen with Samsung Galaxy Note on it.
When I boot with volume down, a screen popups up if I'm sure than press volume up. After that I'm in ODIN mode (says so with red letters in the left top). Below that it says: PRODUCT NAME: GT-N7000 , CUSTOM BINARY DOWNLOAD: NO , CURRENT BINARY: SAMSUNG OFFICIAL.
In the middle of the screen below the Android guy it says: Downloading... Do not turn of target !! (I'm not really sure if its suposed to say downloading there, while its not downloading anything?)
What I did so far
I came from a gingerbread Rocket ROM and decided to try out the ICS Stunner rom. I downloaded the ROM and read the install discription. I pretty much went into CWM right away to install the zip (rom) from SD card. It did work and ofcourse everything was still there cause I didnt wipe anything. But I noticed that a bunch of things didn't work and a lot of programs where crashing. I assumed I must have missed a step so I decided to go with the 'Squeaky Clean' install, which was posted on the team-passion website.
This was the last time I was able to get into CWM and connect my phone true USB with my laptop. Because I did the following steps:
Reboot in to ClockworkMod Recovery.
Format the following:
- Wipe Data/Factory Reset
- Wipe Cache Partition
**Enter 'Mounts and Storage'**
- Format everything it will allow you to
**Go Back, enter 'Advanced'**
-Wipe Dalvik Cache
-Wipe Battery Stats
**Go Back to main menu, reboot system**
The next step on that list is: Remove your battery and boot up into 'Download Mode'. But the only mode I am getting into is the ODIN MODE where it already says 'Downloading...'. When I try to flash using ODIN, it isn't able to setup the connection. It does identify that the phone is connected because the ID:COM is yellow on 0:[COM3]. It didn't before, but after reading somewere that it might help to install Kies for the drivers it did.
Also tried "InitialCFRootFlasher" and "DooMLoRD_v4_ROOT-zergRush-busybox-su" but both arent able to establish the connection. Just like ODIN.
What I'd like to do
I'd prefer going with the ICS Stunner ROM, seeing thats how this all started. But currently I'd settle for anything working, because being phoneless for a day is pretty anoying hehe.
What do you guys suggest?

I really don't know how u understood the process. But just don't screw this. Go download any of the pre rooted odex rom -link in my signature - and flash it via odin.
Or any rootable rom from dr ketan's thread - link in my signature - and follow the steps mentioned there to the Dot slowly and calmly. Just get to GB and rooted. Then report here. Will tell u how to go to ics stunner after that.
BOOMED from my BOMBASTIC NOTE

Thanks for the quick reply. I'm currently downloading one of the prerooted roms from your signature. However it would suprise me if ODIN allows me to install these seeing it can't really connect to the phone. Am I suposed to be in the 'Downloading... Do not turn of target !!' screen on my phone, while connected to laptop true USB?
Will update once I'v got it.

h4y0 said:
Thanks for the quick reply. I'm currently downloading one of the prerooted roms from your signature. However it would suprise me if ODIN allows me to install these seeing it can't really connect to the phone. Am I suposed to be in the 'Downloading... Do not turn of target !!' screen on my phone, while connected to laptop true USB?
Will update once I'v got it.
Click to expand...
Click to collapse
Yup u need to be in that mode. The odin on your PC should show the Com port as yellow. If it doesnt then there is some drivers problem.

It is connected yeah, the com port is shown as yellow. After loading any rom in PDA, Phone or Bootloader and only checking auto reboot and f. reset time this is what happens:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
And thats where its hanging, nothing on the phone screen is changing.
I don't remember the screen saying 'Downloading..' last time I flashed something. It's already saying that when I enter the screen, when its not downloading anything.

Apparently I'm not able to make edits yet here so heres another post after figuring out how to load these files:
It is connected yeah, the com port is shown as yellow. After loading the three files in ODIN under PDA, PHONE and CSC just like on the screenshot in your signature. And only checking 'Auto reboot' and 'F. Reset Time' the following happens:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Rooted_Stock_Odex_N7000XXLA6.tar.md5 is valid.
<OSM> MODEM.tar.md5 is valid.
<OSM> CSC_N7000XEULA1_XEU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..

abhisahara said:
Just get to GB and rooted. Then report here.
Click to expand...
Click to collapse
Done! I'm still not sure what went wrong, I think placing the files in the wrong place in ODIN. Got a tip from someone how to place them and they worked in one go. Pretty weird cause I was using the same setup as the XDA guide post.
Main problem is solved now, I'll have to look into the ICS thing now. Thanks for your help.

h4y0 said:
Done! I'm still not sure what went wrong, I think placing the files in the wrong place in ODIN. Got a tip from someone how to place them and they worked in one go. Pretty weird cause I was using the same setup as the XDA guide post.
Main problem is solved now, I'll have to look into the ICS thing now. Thanks for your help.
Click to expand...
Click to collapse
Sorry was away so couldnt reply. The setup shown i xda should work perfectly. Anyways its good to know that you got all things settled. You can install the ICS Stunner (no touchwiz and no samsung apps) if you so want. Remember to backup your data as you will have to wipe data for going to ICS. From rooted GB install mobile odin then download the lp1 repack from my signature and after all that is done reboot to recovery clear caches and data and flash stunner (download the latest build by clicking Stunner in my signature) clear caches and data and reboot.
* Triangle away is required only when you flash lp1 through PC Odin.*

Ended up using the mobile odin application, works like a charm.
Thanks for your help!

h4y0 said:
Ended up using the mobile odin application, works like a charm.
Thanks for your help!
Click to expand...
Click to collapse
You are welcome. Glad it all worked for you. Hitting some thanks button will be good too LOL

galaxy note stuck at bootscreen

hello,
i was using my note when i got a battery warning and i just continued to use my phone and battery just died ( all normal)
when this morning i tried to charge my phone it appeard to be stuck on the "galaxy note gt-n7000"- screen and i just can't get it to start up
i left it in the charger all day but still no use.
the phone has never been flashed before and runs on official ICS 4.0.3
someone please help me really dunno what to do

I've seen Notes being stuck there, and mostly they are bricked cause of emmc or a corrupted kernel. Are yiu sure didn't flash anything? What was your last activity before your Note died?

vlxdxmxr said:
I've seen Notes being stuck there, and mostly they are bricked cause of emmc or a corrupted kernel. Are yiu sure didn't flash anything? What was your last activity before your Note died?
Click to expand...
Click to collapse
i was just playing a game from android market,
my phone has never been flashed everything was official and working well

what's emmc or the kernel thing,
sorry to ask but i'm a total noob at this.
and is there a way to fix this?

MrPlox said:
what's emmc or the kernel thing,
sorry to ask but i'm a total noob at this.
and is there a way to fix this?
Click to expand...
Click to collapse
hmmm from the sounds of it... your phone is not brick... it just entered into a very deep slumber mode...
one thing you can revive to wake it is perhaps to get a usb jig and revive your phone using it.
Or, you can try Holding the power button down, holding Volume key Down and the Home key all at the same time.....while your phone is plug to the charger...
See if something will come up on the screen....

letters_to_cleo said:
hmmm from the sounds of it... your phone is not brick... it just entered into a very deep slumber mode...
one thing you can revive to wake it is perhaps to get a usb jig and revive your phone using it.
Or, you can try Holding the power button down, holding Volume key Down and the Home key all at the same time.....while your phone is plug to the charger...
See if something will come up on the screen....
Click to expand...
Click to collapse
when i push the volume down+home+power button it goes into download mode and it asks me if i want to restart the phone or continue putting another OS on it

MrPlox said:
when i push the volume down+home+power button it goes into download mode and it asks me if i want to restart the phone or continue putting another OS on it
Click to expand...
Click to collapse
Flash gb rom use pc odin only, after flashing gb rom if still stuck in logo go to recovery mode and wipe data and cache.

jonpaslim said:
Flash gb rom use pc odin only, after flashing gb rom if still stuck in logo go to recovery mode and wipe data and cache.
Click to expand...
Click to collapse
Reflash ICS v4.0.4 its will improve the battery performance via pc odin

well i tried to flash another one but it gets stuck at NAND write and stays there

MrPlox said:
well i tried to flash another one but it gets stuck at NAND write and stays there
Click to expand...
Click to collapse
Which Rom you are trying to flash ? Please post the details...
And I recommend you to flash a pre rooted GB Rom/Directly Rooted GB Rom via PC Odin..

sahilarora2003 said:
Which Rom you are trying to flash ? Please post the details...
And I recommend you to flash a pre rooted GB Rom/Directly Rooted GB Rom via PC Odin..
Click to expand...
Click to collapse
well can you recommend me a good rom pls?
after getting stuck at NAND write when i start up the phone i get the bootscreen with a yellow triangle beneeth it
can some1 give me a step by step tutorial on how to fix it cuz i'm not really experienced in flashing n stuff
only thing i've ever done was rooting an acer liquid
thx in advance

MrPlox said:
well can you recommend me a good rom pls?
after getting stuck at NAND write when i start up the phone i get the bootscreen with a yellow triangle beneeth it
can some1 give me a step by step tutorial on how to fix it cuz i'm not really experienced in flashing n stuff
only thing i've ever done was rooting an acer liquid
thx in advance
Click to expand...
Click to collapse
Read this http://forum.xda-developers.com/showthread.php?t=1810954
Follow Dr.Ketan guide,you will be fine...:good:

MrPlox said:
well can you recommend me a good rom pls?
after getting stuck at NAND write when i start up the phone i get the bootscreen with a yellow triangle beneeth it
can some1 give me a step by step tutorial on how to fix it cuz i'm not really experienced in flashing n stuff
only thing i've ever done was rooting an acer liquid
thx in advance
Click to expand...
Click to collapse
http://d-h.st/HJM
Flash it via PCODIN

MrPlox said:
hello,
i was using my note when i got a battery warning and i just continued to use my phone and battery just died ( all normal)
when this morning i tried to charge my phone it appeard to be stuck on the "galaxy note gt-n7000"- screen and i just can't get it to start up
i left it in the charger all day but still no use.
the phone has never been flashed before and runs on official ICS 4.0.3
someone please help me really dunno what to do
Click to expand...
Click to collapse
It should not happen such with you...
If you are out of battery on official ROM, generally by getting it charged back can resolve the issue...
Try to recall, you must Gabe something else...
|Th£ G®£@t [email protected] [email protected]|@x¥ |\|0t€|:banghead:

MrPlox said:
hello,
i was using my note when i got a battery warning and i just continued to use my phone and battery just died ( all normal)
when this morning i tried to charge my phone it appeard to be stuck on the "galaxy note gt-n7000"- screen and i just can't get it to start up
i left it in the charger all day but still no use.
the phone has never been flashed before and runs on official ICS 4.0.3
someone please help me really dunno what to do
Click to expand...
Click to collapse
Did get any help?
I have the same problem.
I wasn't using any custom rom
I have Galaxy Note N7000
i was running stock ICS 4.0.4 (open Germany) [N7000XXLRK_N7000DBTLRK_DBT]
My phone was rooted but with no custom binary counts.
I install beat audio driver and I count restart my phone. it was stuck on the samsung screen
I didnt have any back up so i tried to use Odin and re-flash my stock ICS firmware but its stuck at NAND write start!!!
I have read so many threads but it hasn't helped. it seems like almost everyone is using custom roms
i even got one binary count follow the tutorial on this thread after i flashed a kernel (4pda_kernel.tar) http://forum.xda-developers.com/showpost.php?p=26285877&postcount=12
Ive also tried stock gingerbread still stock there..
My phone is able to enter recovery mode or download mode or stock in the samsung screen..
PLEASE can someone help with something that works..?

sahilarora2003 said:
http://d-h.st/HJM
Flash it via PCODIN
Click to expand...
Click to collapse
well imma try just flashing stock ics from dr Ketan right now and i'll let you guys know what the result is

well i tried flashing a stock GB rom with odin 1.85 i followed everything step by step an odin gets stuck at zImage:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000XXLA3_CL880036_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXLA3_REV_05_CL1095424.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALA3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> Sbl.bin
<ID:0/009> param.lfs
<ID:0/009> zImage
i tried other cable, other usb ports even other computer and always same results can anyone help me out plz

MrPlox said:
well i tried flashing a stock GB rom with odin 1.85 i followed everything step by step an odin gets stuck at zImage:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CODE_N7000XXLA3_CL880036_REV02_user_low_ship.tar.md5 is valid.
<OSM> MODEM_N7000XXLA3_REV_05_CL1095424.tar.md5 is valid.
<OSM> GT-N7000-MULTI-CSC-OXALA3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> Sbl.bin
<ID:0/009> param.lfs
<ID:0/009> zImage
i tried other cable, other usb ports even other computer and always same results can anyone help me out plz
Click to expand...
Click to collapse
Havent seen any update from u... have u managed to rectify the issue?

nokiamodeln91 said:
Havent seen any update from u... have u managed to rectify the issue?
Click to expand...
Click to collapse
no havan't been able to fix it yet it's a pretty tough issue, now i'm following a guide to completely repartition the phone cuz there might be a bad sector

Try re-flash back with PCODIN and once flashed and still stuck at 'samsung' boot screen, press vol up + home + power button and do a factory reset. Then reboot system/wipe data cache.

[Q] Please help me with my Note GT-N7000 (I might have bricked it)

My Galaxy Note GT-N7000 was on CM10 last night and I followed Zedomax's rootgalaxynote.com GT-N7000 unrooting method and when I was installing the Mobile Odin Lite on my phone, it said it needs to download more add-on to be able to flash it, then all the sudden my internet connection was down, so I couldn't download it, but followed his instruction and tried wipe and factory reset, but it got stuck at formatting (no progress), then I flashed cm9 again, but it was stuck at cm9 boot logo, nothing else. Then I followed Zedomax's rootgalaxynote.com's first method using my Computer Desktop but
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKL1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
" it got stuck at here, no progress. The only thing I can do with my phone is that to either put on download mode or it says "Firmware upgrade encountered an isssue. Please select recovery mode in Kies & try again." Please help me with this friends. I am looking forward to your help. Thank you.
Khai.

you give not detail as needed. but nevermine, from the last part it seems you has bricked your phone.
i think you might need to refer "hg42" thread to revive your note.
Sad to be hear that.
Sent from my GT-N7000 using xda premium

immediately contact dr.ketan
khaino said:
My Galaxy Note GT-N7000 was on CM10 last night and I followed Zedomax's rootgalaxynote.com GT-N7000 unrooting method and when I was installing the Mobile Odin Lite on my phone, it said it needs to download more add-on to be able to flash it, then all the sudden my internet connection was down, so I couldn't download it, but followed his instruction and tried wipe and factory reset, but it got stuck at formatting (no progress), then I flashed cm9 again, but it was stuck at cm9 boot logo, nothing else. Then I followed Zedomax's rootgalaxynote.com's first method using my Computer Desktop but
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKL1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
" it got stuck at here, no progress. The only thing I can do with my phone is that to either put on download mode or it says "Firmware upgrade encountered an isssue. Please select recovery mode in Kies & try again." Please help me with this friends. I am looking forward to your help. Thank you.
Khai.
Click to expand...
Click to collapse
Contact dr.ketan for yr solution. He is the sweet n right person to guide u.

khaino said:
My Galaxy Note GT-N7000 was on CM10 last night and I followed Zedomax's rootgalaxynote.com GT-N7000 unrooting method and when I was installing the Mobile Odin Lite on my phone, it said it needs to download more add-on to be able to flash it, then all the sudden my internet connection was down, so I couldn't download it, but followed his instruction and tried wipe and factory reset, but it got stuck at formatting (no progress), then I flashed cm9 again, but it was stuck at cm9 boot logo, nothing else. Then I followed Zedomax's rootgalaxynote.com's first method using my Computer Desktop but
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKL1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
" it got stuck at here, no progress. The only thing I can do with my phone is that to either put on download mode or it says "Firmware upgrade encountered an isssue. Please select recovery mode in Kies & try again." Please help me with this friends. I am looking forward to your help. Thank you.
Khai.
Click to expand...
Click to collapse
the ever GOLDEN RULE: Don't ever ever attempt to WIPE data if your on a unsafe or on a stock ICS kernel. That's should be at the top of your list before you do anything on your phone. If you need to WIPE, make sure your already in a safe kernel or if you haven't still, then flash one.
Now going back on your perennial issue. The only thing you can and will do is FLASH a stock GB on download mode using PC ODIN. Yes Doc Ketan's thread/s have those old GB's ROM.. -> http://forum.xda-developers.com/showthread.php?t=1424997, follow it to a tee.
One added thing when your going to start to flash GB again... Pray, that it would not stuck back again at 'factoryfs.img'
Good luck bud!

No luck...yet.
letters_to_cleo said:
the ever GOLDEN RULE: Don't ever ever attempt to WIPE data if your on a unsafe or on a stock ICS kernel. That's should be at the top of your list before you do anything on your phone. If you need to WIPE, make sure your already in a safe kernel or if you haven't still, then flash one.
Now going back on your perennial issue. The only thing you can and will do is FLASH a stock GB on download mode using PC ODIN. Yes Doc Ketan's thread/s have those old GB's ROM.. -> http://forum.xda-developers.com/showthread.php?t=1424997, follow it to a tee.
One added thing when your going to start to flash GB again... Pray, that it would not stuck back again at 'factoryfs.img'
Good luck bud!
Click to expand...
Click to collapse
I spent two days straight working on it, but no luck. I think I am gonna contact Samsung and send it to them for the warranty and I don't know if they would know that I rooted it. But I am just gonna give a try. Please share your knowledge and thoughts. Thank you.

Reflash it with PC odin (Again? )... refer to Dr Ketan... I encounter same issues before, I just try try to reflash old GB... link at #4

khaino said:
I spent two days straight working on it, but no luck. I think I am gonna contact Samsung and send it to them for the warranty and I don't know if they would know that I rooted it. But I am just gonna give a try. Please share your knowledge and thoughts. Thank you.
Click to expand...
Click to collapse
Can you get the Note into Download mode?
If so, try using desktop Odin (latest desktop version not mobile version) and flash the Abyss 4.2 kernel. the Tar file is easily found on XDA. This is a GB kernel and should allow you to get into full Recovery. From there you can flash a new ROM as you are now on a safe kernel.

Tried that, but not sure about the latest desktop version.
Alba Donzo said:
Can you get the Note into Download mode?
If so, try using desktop Odin (latest desktop version not mobile version) and flash the Abyss 4.2 kernel. the Tar file is easily found on XDA. This is a GB kernel and should allow you to get into full Recovery. From there you can flash a new ROM as you are now on a safe kernel.
Click to expand...
Click to collapse
Hi, thank you for your message, I was on Abyskernel when I factory data reset, and tried to flash back to cm9 from cm10, but no luck. Then I used Odin3-v1.85 on desktop with Gingerbread Rom, it got stuck at factoryfs.img.. I have tried with different pc disabling firewall and anti virus. What is the latest desktop version of Odin that you know? What specific tar file do you know that is the best? Thank you again.

khaino said:
Hi, thank you for your message, I was on Abyskernel when I factory data reset, and tried to flash back to cm9 from cm10, but no luck. Then I used Odin3-v1.85 on desktop with Gingerbread Rom, it got stuck at factoryfs.img.. I have tried with different pc disabling firewall and anti virus. What is the latest desktop version of Odin that you know? What specific tar file do you know that is the best? Thank you again.
Click to expand...
Click to collapse
Latest Odin is 3.0.4
Sent from my GT-N7000 using xda app-developers app

khaino said:
Hi, thank you for your message, I was on Abyskernel when I factory data reset, and tried to flash back to cm9 from cm10, but no luck. Then I used Odin3-v1.85 on desktop with Gingerbread Rom, it got stuck at factoryfs.img.. I have tried with different pc disabling firewall and anti virus. What is the latest desktop version of Odin that you know? What specific tar file do you know that is the best? Thank you again.
Click to expand...
Click to collapse
your CM10 to CM9 downgrade sounds like a bad flash, it can happen. I would try Odin3 V3.05 with Abyss (search for "AbyssNotekernel42CWTouchOriginalLogo.tar" or go here - https://www.dropbox.com/s/yoe791qq3atbung/AbyssNotekernel42CWTouchOriginalLogo.tar).
this should allow you to install a safe kernel to flash from. if you can now access Recovery, then you can flash a ROM from there. I would use a Stock based one (I always recommend Chrack ROM or Criskelo), If you prefer, you can download a Stock tar file and use Odin but I would try downloading the latest Chrack ROM or Criskelo ROM, transferring it to your micro SD and flashing after you have installed the Abyss tar.
I hope this helps. Please hit Thanks if it did.

Question!
Alba Donzo said:
your CM10 to CM9 downgrade sounds like a bad flash, it can happen. I would try Odin3 V3.05 with Abyss (search for "AbyssNotekernel42CWTouchOriginalLogo.tar"
this should allow you to install a safe kernel to flash from. if you can now access Recovery, then you can flash a ROM from there. I would use a Stock based one (I always recommend Chrack ROM or Criskelo), If you prefer, you can download a Stock tar file and use Odin but I would try downloading the latest Chrack ROM or Criskelo ROM, transferring it to your micro SD and flashing after you have installed the Abyss tar.
I hope this helps. Please hit Thanks if it did.
Click to expand...
Click to collapse
You gave me the AbyssNotekernel, but the only thing my phone can now do when I turn on is either show a screen with "Firmware upgrade encounters an issue. Please select recovery mode in Kies and try again" or on download mode. Or is there any way I can use the Desktop Odin and try to install the AbyssNotekernel that you gave me? I really don't know bro. Thank you for the message, please let me know.

khaino said:
You gave me the AbyssNotekernel, but the only thing my phone can now do when I turn on is either show a screen with "Firmware upgrade encounters an issue. Please select recovery mode in Kies and try again" or on download mode. Or is there any way I can use the Desktop Odin and try to install the AbyssNotekernel that you gave me? I really don't know bro. Thank you for the message, please let me know.
Click to expand...
Click to collapse
Yes, the Abyss tar file is for use with Odin. install Odin on your PC, put the Note into Download and connect. Flash the tar file and wait for the Note to reboot (search for notes on how to flash with Odin if you're not 100% sure). you should now be able to use Recovery to flash a ROM from this safe kernel.

Just a quick question.
Alba Donzo said:
Yes, the Abyss tar file is for use with Odin. install Odin on your PC, put the Note into Download and connect. Flash the tar file and wait for the Note to reboot (search for notes on how to flash with Odin if you're not 100% sure). you should now be able to use Recovery to flash a ROM from this safe kernel.
Click to expand...
Click to collapse
Sorry I didn't explain in details, I am on pc Odin version 3.07 and clicked on PDA but the Abyss tar file is not appearing there even after unzipping it a couple of times on the desktop. Please let me know bro. Thank you for your response.
Khai.

khaino said:
Sorry I didn't explain in details, I am on pc Odin version 3.07 and clicked on PDA but the Abyss tar file is not appearing there even after unzipping it a couple of times on the desktop. Please let me know bro. Thank you for your response.
Khai.
Click to expand...
Click to collapse
.tar file is to be flashed with odin directly. It has an image inside and should not extract it. Should put the .tar file in one folder but not on desktop screen. Select pda box in odin and brow to the folder where you put .tar file. Should see it there.
BTW, if flash using CWM failed again, then should use hg42 scanner to check if there is partition damage.
http://forum.xda-developers.com/showthread.php?t=1823918

Update.
forest1971 said:
.tar file is to be flashed with odin directly. It has an image inside and should not extract it. Should put the .tar file in one folder but not on desktop screen. Select pda box in odin and brow to the folder where you put .tar file. Should see it there.
BTW, if flash using CWM failed again, then should use hg42 scanner to check if there is partition damage.
http://forum.xda-developers.com/showthread.php?t=1823918
Click to expand...
Click to collapse
Thanks for your patience on your instruction, I actually was able to flash the Abysskernel that you gave me with ODIN and it went straight to the recovery mode, but then I can't install anything, then I put it back to download mode and tried to flash a Gingerbread ROM, but as always it got stucked at factoryfs.img. What do you think I can do bro? Please let me know about it. Thank you.
Khai.

khaino said:
Thanks for your patience on your instruction, I actually was able to flash the Abysskernel that you gave me with ODIN and it went straight to the recovery mode, but then I can't install anything, then I put it back to download mode and tried to flash a Gingerbread ROM, but as always it got stucked at factoryfs.img. What do you think I can do bro? Please let me know about it. Thank you.
Khai.
Click to expand...
Click to collapse
It seem to show you have an emmc brick, although using the partition scanner will confirm. The options are to send to ss service for warranty or to revise using repartition. For warranty you will need to reset flash counter using a jig.
Sent from my phone

Update and question.
forest1971 said:
It seem to show you have an emmc brick, although using the partition scanner will confirm. The options are to send to ss service for warranty or to revise using repartition. For warranty you will need to reset flash counter using a jig.
Sent from my phone
Click to expand...
Click to collapse
Hi bro,
I flashed the Abysskernel again and it went to Samsung Galaxy Note GT-N7000 logo with big Triangle at the bottom and it then goes to Android system recovery <3e>, then it looks like there is no option for me to access the SD card, but its own 16GB storage it came with and that one has CM10 in it. Tried to flash that, but it says "E:failed to verify whole-file signature". If I attempt to claim for warranty will Samsung know that I rooted it after clearing the binary counts? Please let me know. Thank you for your instructions. If there is anything else you want me to try out, please let me know. Thank you.
Khai.

khaino said:
Hi bro,
I flashed the Abysskernel again and it went to Samsung Galaxy Note GT-N7000 logo with big Triangle at the bottom and it then goes to Android system recovery <3e>, then it looks like there is no option for me to access the SD card, but its own 16GB storage it came with and that one has CM10 in it. Tried to flash that, but it says "E:failed to verify whole-file signature". If I attempt to claim for warranty will Samsung know that I rooted it after clearing the binary counts? Please let me know. Thank you for your instructions. If there is anything else you want me to try out, please let me know. Thank you.
Khai.
Click to expand...
Click to collapse
Once reset flash counter the triangle will go and you can flash a stock kernel find link from dr.ketan toolbox, then it is ok to send to warranty.
Sent from my phone

Update.
forest1971 said:
Once reset flash counter the triangle will go and you can flash a stock kernel find link from dr.ketan toolbox, then it is ok to send to warranty.
Sent from my phone
Click to expand...
Click to collapse
Hi bro, it somehow managed to get on CWM and but any flashing was aborted. And tried to flash Criskelo, but got stuck at installing, no progress. What should I do? Thank you.

Just two options above, warranty or repartition.
Sent from my phone

[HELP] I think I bricked my note while flashing JellyBean

Well, I'm a complete noob, though I have a rooted ICS, I never tried to flash a ROM 'till now, but I really wanted to see JellyBean running on my phone.
What I did:
> Saw this thread http://forum.xda-developers.com/showthread.php?t=1953847
> Downloaded the ROM
> I read the first step as "make sure you are on a (rooted ICS-ROM) or (JB-ROM with CWM recovery and brickfree kernel installed)" and not "make sure you are on a [(rooted ICS-ROM) or (JB-ROM with CWM recovery)] and brickfree kernel installed"
> Since I had a "rooted ICS-ROM" I continued to next step, copied he ROM, booted in recovery and did a FullWipe. Obviously, I didn't see the brickbug warnings which even a 5 year old with one eye :cyclops: would have seen.
> So, just to be safe I flashed abyssKernel 4.2 from ODIN via Download Mode (Volume Down + power + home)
> Now I have the yellow triangle and raised flash counter
> Finally I tried to flash Stock ICS ROM from Dr Ketan's guide http://forum.xda-developers.com/showthread.php?t=1424997
Now this is what I see in the Odin3 v1.85 message box:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DDLR9_N7000ODDLR3_N7000DDLR1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
Help plz :| :crying:

clear this step
> Since I had a "rooted ICS-ROM" I continued to next step, copied he ROM, booted in recovery and did a FullWipe
you had just rooted ICS or root + safe kernel, I mean which kernel was there at the time you wiped.
another thing you didn't mentioned have you flash that ROM you have copied to SD or not
Your log still can't confirm brick, keep patience and reply to queries above
as well confirm your device was in download mode while flashing ROM with Odin as well ID com port was added in Odin (I can't see in log).

dr.ketan said:
clear this step
> Since I had a "rooted ICS-ROM" I continued to next step, copied he ROM, booted in recovery and did a FullWipe
you had just rooted ICS or root + safe kernel, I mean which kernel was there at the time you wiped.
another thing you didn't mentioned have you flash that ROM you have copied to SD or not
Your log still can't confirm brick, keep patience and reply to queries above
as well confirm your device was in download mode while flashing ROM with Odin as well ID com port was added in Odin (I can't see in log).
Click to expand...
Click to collapse
Actually, I'm not sure which kernel I had, I think I had either the default kernel or the AbyssKernel (I never used any other kernels)
I didn't flash the copied ROM
And yes, the device was in download mode while flashing stock ICS and ID:COM in odin turned yellow.

Do you remember how you had root ICS?
Anyway issue is not seems that, your device was not added
repeat procedure
Confirm you have installed Kies/Adb driver
Put device in download mode
connect device
ID com should turn yellow
select PDA for ROM file
Hit 'start' to flash

dr.ketan said:
Do you remember how you had root ICS?
Click to expand...
Click to collapse
I followed rootgalaxynote's guide for ICS
http () ://rootgalaxynote. () com/galaxy-note-root/how-to-root-ics-on-galaxy-note-gt-n7000-no-computer-required/
(Sorry I cant post links as I am a new user, so remove the brackets)

Anyway follow as said in my previous post
And yes, you were on which ROM ?(answer this before reflashing, if you were on DDLR9 just flashing kernel will be enough)

dr.ketan said:
Anyway follow as said in my previous post
And yes, you were on which ROM ?(answer this before reflashing, if you were on DDLR9 just flashing kernel will be enough)
Click to expand...
Click to collapse
Yes, I was in DDLR9
Also, I can't even get into download mode now, it says "Low battery! cant download!".
And it is plugged in to the computer for almost two hours now

switch off device and plugin to charger it may get charged. if you get into download mode do this
Ok then download this
http://www.mediafire.com/?b7yee04jkcf60g6
and flash with PC Odin (your counter already raise so nothing to worry about it)
you have to select this file for PDA tab, rest of instruction as few post above said
Otherwise manage for charged battery

dr.ketan said:
switch off device and plugin to charger it may get charged. if you get into download mode do this
Ok then download this
http://www.mediafire.com/?b7yee04jkcf60g6
and flash with PC Odin (your counter already raise so nothing to worry about it)
you have to select this file for PDA tab, rest of instruction as few post above said
Otherwise manage for charged battery
Click to expand...
Click to collapse
Currently its not going into download mode, willl try to get a charged battery and post the results as soon as I can. Thanks in advance.

Also, I get this
'charging_q1.jpg' draw failed
message.

No problem just try download mode working or can you start recovery mode
Sent from my GT-N7100 using xda premium

dr.ketan said:
No problem just try download mode working or can you start recovery mode
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Your a saint ,Dr...!
Sent from my GT-N7000 using Tapatalk 2

howard bamber said:
Your a saint ,Dr...!
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
+1. DR. K, you are always there helping when some one in lost. I remember you said that you no longer own a G.NOTE, but instead a G.NOTE2, but you are so willing to help those whoever facing problem. You are a SAINT. big applause. thank you so much
Sent from my GT-N7000 using Tapatalk 2

I succesfully flashed PhilZ and then tried to flash the stock ICS ROM but it failed.
The Odin message box showed the following:
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DDLR9_N7000ODDLR3_N7000DDLR1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> zImage
<ID:0/013> NAND Write Start!!
<ID:0/013> modem.bin
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/013> Removed!!

May be remove the battery for a few seconds, reinsert and go download mode again and fladh

nokiamodeln91 said:
May be remove the battery for a few seconds, reinsert and go download mode again and fladh
Click to expand...
Click to collapse
Tried, no result, still says low battery cant download :/
I think I should go to the service center then.

either charge the battery on a diff note or try a full charged battery

Samsung service centre had to replace my motherboard. Now it's alright.

Boot loop after changing permission of etc folder

hello,
i have an galaxy note n7000, rooted with philz-cmw6.
the os was stock jelly bean 4.1.2
i was trying the airview patch given by cursed4ever by coping the xml file to etc\permission folder.
at first the file manager gave permission denied message. after searching threads i found that permission for the folder etc is to be changed on doing so i noticed that the entire folder went empty.
i copied the airview patch file and tried to reboot and since it is under infinite loop..
i can enter in the recovery mode having philz cmw6
please anyone can guide what further action should i take:crying:

u can use philz cwm install aroma file manager so u can use it in philz cwm without turning on ur phone to do copy n paste work ！
if still unable to bootup successful u can always do a factory reset n may lost all ur data ！
if u got a recent backup then just restore it ！
actually copy n paste work in etc/permission for airview won't cuz such problem...
maybe b4 doing the changes u already got bootloop issue but didn't noticed...

1. Reboot to recovery and select "fix permission"..after finish, reboot system..
Or
2. Reflash rom without any wipe..good luck
Sent from my GT-N7000 using Tapatalk 2

copy n paste work won't cuz the whole etc/permission folder to be missing ！
not sure what u've done ！

reflash the rom again without wipes if nothing else works

nokiamodeln91 said:
reflash the rom again without wipes if nothing else works
Click to expand...
Click to collapse
hello i tried to reflash the same rom with ODIN... the message came was fail... now i cant enter the recovery mode... i can enter into download mode...
the phone on start give a message"Firmware upgrade encountered an issue. please select recovery mode in kies & try again"
tried connecting to kies.... kies fails to recognize the phone.... what the hell is happening.... please help guys... i will really be greatfull...

Please tell us exactly what error message you got in ODIN.

+1.. paste the odin logs

ThaiDai said:
Please tell us exactly what error message you got in ODIN.
Click to expand...
Click to collapse
in bold letter its written fail on the top window...
i again tried to connect with ODIN now its coming Removed message again and again..

AW: Boot loop after changing permission of etc folder
I do not understand you. A snapshot please.
Sent from my GT-N7000 using xda premium

Paste odin log on down left conner..
Sent from my GT-N7000 using Tapatalk 2

ThaiDai said:
I do not understand you. A snapshot please.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
i am again trying to flash via ODIN currently the the message area is displaying factoryfs.img
if this doesnt work r stops in between then i will post a snapshot... thanks for the quick replies.... it feels very good that someone is waiting to help....

ritesh.bafna88 said:
in bold letter its written fail on the top window...
i again tried to connect with ODIN now its coming Removed message again and again..
Click to expand...
Click to collapse
remove the battery and reboot into download mode ... on the bottom left corner of Odin there is a log window. copy what you get there and paste here for better understanding

current log
<ID:0/036> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N7000XXLSZ_N7000OXALSZ_906407_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/036> Odin v.3 engine (ID:36)..
<ID:0/036> File analysis..
<ID:0/036> SetupConnection..
<ID:0/036> Initialzation..
<ID:0/036> Get PIT for mapping..
<ID:0/036> Firmware update start..
<ID:0/036> cache.img
<ID:0/036> NAND Write Start!!
<ID:0/036> factoryfs.img

How long you have been stuck on factoryfs.img??
Sent from my GT-N7000 using Tapatalk 2

zai89 said:
How long you have been stuck on factoryfs.img??
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
nearly 5 to 7 mins now.... the bar is inching so i know there is progress how the message area displays hidden.img

This is the normal symptom for a bricked device.
There are many threads with information about it and the possible workaround with repartition (hg42).
I do not have the time now for more details - but luckily other members are active and will give you links etc.

nearly 5 to 7 mins now.... the bar is inching so i know there is progress how the message area displays hidden.img
Click to expand...
Click to collapse
if its reached hidden.. then its ok.. give it some time.. donot remove the cable till it says pass

ThaiDai said:
This is the normal symptom for a bricked device.
There are many threads with information about it and the possible workaround with repartition (hg42).
I do not have the time now for more details - but luckily other members are active and will give you links etc.
Click to expand...
Click to collapse
thanks for all the help.... the process is making a little progress its slow but still i know its fighting.... isnt it good sign.... if the process completes then what are the chances that the phone will boot??

ritesh.bafna88 said:
thanks for all the help.... the process is making a little progress its slow but still i know its fighting.... isnt it good sign.... if the process completes then what are the chances that the phone will boot??
Click to expand...
Click to collapse
I do not know. but until now it looks like you are not stucked at factoryfs.img.
Then it's not bricked and everything will be ok later. Good Luck.