Related
Hi guys,
Current situation
I haven't been able to use my phone for a good day now and I been busy reading guides, trying out stuff for a bunch of hours now. I thought it was time to ask you guys. Currently this is the only thing I'm able to do:
When I boot normally its stuck on the black screen with Samsung Galaxy Note on it.
When I boot with volume down, a screen popups up if I'm sure than press volume up. After that I'm in ODIN mode (says so with red letters in the left top). Below that it says: PRODUCT NAME: GT-N7000 , CUSTOM BINARY DOWNLOAD: NO , CURRENT BINARY: SAMSUNG OFFICIAL.
In the middle of the screen below the Android guy it says: Downloading... Do not turn of target !! (I'm not really sure if its suposed to say downloading there, while its not downloading anything?)
What I did so far
I came from a gingerbread Rocket ROM and decided to try out the ICS Stunner rom. I downloaded the ROM and read the install discription. I pretty much went into CWM right away to install the zip (rom) from SD card. It did work and ofcourse everything was still there cause I didnt wipe anything. But I noticed that a bunch of things didn't work and a lot of programs where crashing. I assumed I must have missed a step so I decided to go with the 'Squeaky Clean' install, which was posted on the team-passion website.
This was the last time I was able to get into CWM and connect my phone true USB with my laptop. Because I did the following steps:
Reboot in to ClockworkMod Recovery.
Format the following:
- Wipe Data/Factory Reset
- Wipe Cache Partition
**Enter 'Mounts and Storage'**
- Format everything it will allow you to
**Go Back, enter 'Advanced'**
-Wipe Dalvik Cache
-Wipe Battery Stats
**Go Back to main menu, reboot system**
The next step on that list is: Remove your battery and boot up into 'Download Mode'. But the only mode I am getting into is the ODIN MODE where it already says 'Downloading...'. When I try to flash using ODIN, it isn't able to setup the connection. It does identify that the phone is connected because the ID:COM is yellow on 0:[COM3]. It didn't before, but after reading somewere that it might help to install Kies for the drivers it did.
Also tried "InitialCFRootFlasher" and "DooMLoRD_v4_ROOT-zergRush-busybox-su" but both arent able to establish the connection. Just like ODIN.
What I'd like to do
I'd prefer going with the ICS Stunner ROM, seeing thats how this all started. But currently I'd settle for anything working, because being phoneless for a day is pretty anoying hehe.
What do you guys suggest?
I really don't know how u understood the process. But just don't screw this. Go download any of the pre rooted odex rom -link in my signature - and flash it via odin.
Or any rootable rom from dr ketan's thread - link in my signature - and follow the steps mentioned there to the Dot slowly and calmly. Just get to GB and rooted. Then report here. Will tell u how to go to ics stunner after that.
BOOMED from my BOMBASTIC NOTE
Thanks for the quick reply. I'm currently downloading one of the prerooted roms from your signature. However it would suprise me if ODIN allows me to install these seeing it can't really connect to the phone. Am I suposed to be in the 'Downloading... Do not turn of target !!' screen on my phone, while connected to laptop true USB?
Will update once I'v got it.
h4y0 said:
Thanks for the quick reply. I'm currently downloading one of the prerooted roms from your signature. However it would suprise me if ODIN allows me to install these seeing it can't really connect to the phone. Am I suposed to be in the 'Downloading... Do not turn of target !!' screen on my phone, while connected to laptop true USB?
Will update once I'v got it.
Click to expand...
Click to collapse
Yup u need to be in that mode. The odin on your PC should show the Com port as yellow. If it doesnt then there is some drivers problem.
It is connected yeah, the com port is shown as yellow. After loading any rom in PDA, Phone or Bootloader and only checking auto reboot and f. reset time this is what happens:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
And thats where its hanging, nothing on the phone screen is changing.
I don't remember the screen saying 'Downloading..' last time I flashed something. It's already saying that when I enter the screen, when its not downloading anything.
Apparently I'm not able to make edits yet here so heres another post after figuring out how to load these files:
It is connected yeah, the com port is shown as yellow. After loading the three files in ODIN under PDA, PHONE and CSC just like on the screenshot in your signature. And only checking 'Auto reboot' and 'F. Reset Time' the following happens:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Rooted_Stock_Odex_N7000XXLA6.tar.md5 is valid.
<OSM> MODEM.tar.md5 is valid.
<OSM> CSC_N7000XEULA1_XEU.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
abhisahara said:
Just get to GB and rooted. Then report here.
Click to expand...
Click to collapse
Done! I'm still not sure what went wrong, I think placing the files in the wrong place in ODIN. Got a tip from someone how to place them and they worked in one go. Pretty weird cause I was using the same setup as the XDA guide post.
Main problem is solved now, I'll have to look into the ICS thing now. Thanks for your help.
h4y0 said:
Done! I'm still not sure what went wrong, I think placing the files in the wrong place in ODIN. Got a tip from someone how to place them and they worked in one go. Pretty weird cause I was using the same setup as the XDA guide post.
Main problem is solved now, I'll have to look into the ICS thing now. Thanks for your help.
Click to expand...
Click to collapse
Sorry was away so couldnt reply. The setup shown i xda should work perfectly. Anyways its good to know that you got all things settled. You can install the ICS Stunner (no touchwiz and no samsung apps) if you so want. Remember to backup your data as you will have to wipe data for going to ICS. From rooted GB install mobile odin then download the lp1 repack from my signature and after all that is done reboot to recovery clear caches and data and flash stunner (download the latest build by clicking Stunner in my signature) clear caches and data and reboot.
* Triangle away is required only when you flash lp1 through PC Odin.*
Ended up using the mobile odin application, works like a charm.
Thanks for your help!
h4y0 said:
Ended up using the mobile odin application, works like a charm.
Thanks for your help!
Click to expand...
Click to collapse
You are welcome. Glad it all worked for you. Hitting some thanks button will be good too LOL
My Galaxy Note GT-N7000 was on CM10 last night and I followed Zedomax's rootgalaxynote.com GT-N7000 unrooting method and when I was installing the Mobile Odin Lite on my phone, it said it needs to download more add-on to be able to flash it, then all the sudden my internet connection was down, so I couldn't download it, but followed his instruction and tried wipe and factory reset, but it got stuck at formatting (no progress), then I flashed cm9 again, but it was stuck at cm9 boot logo, nothing else. Then I followed Zedomax's rootgalaxynote.com's first method using my Computer Desktop but
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKL1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
" it got stuck at here, no progress. The only thing I can do with my phone is that to either put on download mode or it says "Firmware upgrade encountered an isssue. Please select recovery mode in Kies & try again." Please help me with this friends. I am looking forward to your help. Thank you.
Khai.
you give not detail as needed. but nevermine, from the last part it seems you has bricked your phone.
i think you might need to refer "hg42" thread to revive your note.
Sad to be hear that.
Sent from my GT-N7000 using xda premium
immediately contact dr.ketan
khaino said:
My Galaxy Note GT-N7000 was on CM10 last night and I followed Zedomax's rootgalaxynote.com GT-N7000 unrooting method and when I was installing the Mobile Odin Lite on my phone, it said it needs to download more add-on to be able to flash it, then all the sudden my internet connection was down, so I couldn't download it, but followed his instruction and tried wipe and factory reset, but it got stuck at formatting (no progress), then I flashed cm9 again, but it was stuck at cm9 boot logo, nothing else. Then I followed Zedomax's rootgalaxynote.com's first method using my Computer Desktop but
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKL1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
" it got stuck at here, no progress. The only thing I can do with my phone is that to either put on download mode or it says "Firmware upgrade encountered an isssue. Please select recovery mode in Kies & try again." Please help me with this friends. I am looking forward to your help. Thank you.
Khai.
Click to expand...
Click to collapse
Contact dr.ketan for yr solution. He is the sweet n right person to guide u.
khaino said:
My Galaxy Note GT-N7000 was on CM10 last night and I followed Zedomax's rootgalaxynote.com GT-N7000 unrooting method and when I was installing the Mobile Odin Lite on my phone, it said it needs to download more add-on to be able to flash it, then all the sudden my internet connection was down, so I couldn't download it, but followed his instruction and tried wipe and factory reset, but it got stuck at formatting (no progress), then I flashed cm9 again, but it was stuck at cm9 boot logo, nothing else. Then I followed Zedomax's rootgalaxynote.com's first method using my Computer Desktop but
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DXKL1_N7000OLBKJ6_N7000DXKJ3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> factoryfs.img
" it got stuck at here, no progress. The only thing I can do with my phone is that to either put on download mode or it says "Firmware upgrade encountered an isssue. Please select recovery mode in Kies & try again." Please help me with this friends. I am looking forward to your help. Thank you.
Khai.
Click to expand...
Click to collapse
the ever GOLDEN RULE: Don't ever ever attempt to WIPE data if your on a unsafe or on a stock ICS kernel. That's should be at the top of your list before you do anything on your phone. If you need to WIPE, make sure your already in a safe kernel or if you haven't still, then flash one.
Now going back on your perennial issue. The only thing you can and will do is FLASH a stock GB on download mode using PC ODIN. Yes Doc Ketan's thread/s have those old GB's ROM.. -> http://forum.xda-developers.com/showthread.php?t=1424997, follow it to a tee.
One added thing when your going to start to flash GB again... Pray, that it would not stuck back again at 'factoryfs.img'
Good luck bud!
No luck...yet.
letters_to_cleo said:
the ever GOLDEN RULE: Don't ever ever attempt to WIPE data if your on a unsafe or on a stock ICS kernel. That's should be at the top of your list before you do anything on your phone. If you need to WIPE, make sure your already in a safe kernel or if you haven't still, then flash one.
Now going back on your perennial issue. The only thing you can and will do is FLASH a stock GB on download mode using PC ODIN. Yes Doc Ketan's thread/s have those old GB's ROM.. -> http://forum.xda-developers.com/showthread.php?t=1424997, follow it to a tee.
One added thing when your going to start to flash GB again... Pray, that it would not stuck back again at 'factoryfs.img'
Good luck bud!
Click to expand...
Click to collapse
I spent two days straight working on it, but no luck. I think I am gonna contact Samsung and send it to them for the warranty and I don't know if they would know that I rooted it. But I am just gonna give a try. Please share your knowledge and thoughts. Thank you.
Reflash it with PC odin (Again? )... refer to Dr Ketan... I encounter same issues before, I just try try to reflash old GB... link at #4
khaino said:
I spent two days straight working on it, but no luck. I think I am gonna contact Samsung and send it to them for the warranty and I don't know if they would know that I rooted it. But I am just gonna give a try. Please share your knowledge and thoughts. Thank you.
Click to expand...
Click to collapse
Can you get the Note into Download mode?
If so, try using desktop Odin (latest desktop version not mobile version) and flash the Abyss 4.2 kernel. the Tar file is easily found on XDA. This is a GB kernel and should allow you to get into full Recovery. From there you can flash a new ROM as you are now on a safe kernel.
Tried that, but not sure about the latest desktop version.
Alba Donzo said:
Can you get the Note into Download mode?
If so, try using desktop Odin (latest desktop version not mobile version) and flash the Abyss 4.2 kernel. the Tar file is easily found on XDA. This is a GB kernel and should allow you to get into full Recovery. From there you can flash a new ROM as you are now on a safe kernel.
Click to expand...
Click to collapse
Hi, thank you for your message, I was on Abyskernel when I factory data reset, and tried to flash back to cm9 from cm10, but no luck. Then I used Odin3-v1.85 on desktop with Gingerbread Rom, it got stuck at factoryfs.img.. I have tried with different pc disabling firewall and anti virus. What is the latest desktop version of Odin that you know? What specific tar file do you know that is the best? Thank you again.
khaino said:
Hi, thank you for your message, I was on Abyskernel when I factory data reset, and tried to flash back to cm9 from cm10, but no luck. Then I used Odin3-v1.85 on desktop with Gingerbread Rom, it got stuck at factoryfs.img.. I have tried with different pc disabling firewall and anti virus. What is the latest desktop version of Odin that you know? What specific tar file do you know that is the best? Thank you again.
Click to expand...
Click to collapse
Latest Odin is 3.0.4
Sent from my GT-N7000 using xda app-developers app
khaino said:
Hi, thank you for your message, I was on Abyskernel when I factory data reset, and tried to flash back to cm9 from cm10, but no luck. Then I used Odin3-v1.85 on desktop with Gingerbread Rom, it got stuck at factoryfs.img.. I have tried with different pc disabling firewall and anti virus. What is the latest desktop version of Odin that you know? What specific tar file do you know that is the best? Thank you again.
Click to expand...
Click to collapse
your CM10 to CM9 downgrade sounds like a bad flash, it can happen. I would try Odin3 V3.05 with Abyss (search for "AbyssNotekernel42CWTouchOriginalLogo.tar" or go here - https://www.dropbox.com/s/yoe791qq3atbung/AbyssNotekernel42CWTouchOriginalLogo.tar).
this should allow you to install a safe kernel to flash from. if you can now access Recovery, then you can flash a ROM from there. I would use a Stock based one (I always recommend Chrack ROM or Criskelo), If you prefer, you can download a Stock tar file and use Odin but I would try downloading the latest Chrack ROM or Criskelo ROM, transferring it to your micro SD and flashing after you have installed the Abyss tar.
I hope this helps. Please hit Thanks if it did.
Question!
Alba Donzo said:
your CM10 to CM9 downgrade sounds like a bad flash, it can happen. I would try Odin3 V3.05 with Abyss (search for "AbyssNotekernel42CWTouchOriginalLogo.tar"
this should allow you to install a safe kernel to flash from. if you can now access Recovery, then you can flash a ROM from there. I would use a Stock based one (I always recommend Chrack ROM or Criskelo), If you prefer, you can download a Stock tar file and use Odin but I would try downloading the latest Chrack ROM or Criskelo ROM, transferring it to your micro SD and flashing after you have installed the Abyss tar.
I hope this helps. Please hit Thanks if it did.
Click to expand...
Click to collapse
You gave me the AbyssNotekernel, but the only thing my phone can now do when I turn on is either show a screen with "Firmware upgrade encounters an issue. Please select recovery mode in Kies and try again" or on download mode. Or is there any way I can use the Desktop Odin and try to install the AbyssNotekernel that you gave me? I really don't know bro. Thank you for the message, please let me know.
khaino said:
You gave me the AbyssNotekernel, but the only thing my phone can now do when I turn on is either show a screen with "Firmware upgrade encounters an issue. Please select recovery mode in Kies and try again" or on download mode. Or is there any way I can use the Desktop Odin and try to install the AbyssNotekernel that you gave me? I really don't know bro. Thank you for the message, please let me know.
Click to expand...
Click to collapse
Yes, the Abyss tar file is for use with Odin. install Odin on your PC, put the Note into Download and connect. Flash the tar file and wait for the Note to reboot (search for notes on how to flash with Odin if you're not 100% sure). you should now be able to use Recovery to flash a ROM from this safe kernel.
Just a quick question.
Alba Donzo said:
Yes, the Abyss tar file is for use with Odin. install Odin on your PC, put the Note into Download and connect. Flash the tar file and wait for the Note to reboot (search for notes on how to flash with Odin if you're not 100% sure). you should now be able to use Recovery to flash a ROM from this safe kernel.
Click to expand...
Click to collapse
Sorry I didn't explain in details, I am on pc Odin version 3.07 and clicked on PDA but the Abyss tar file is not appearing there even after unzipping it a couple of times on the desktop. Please let me know bro. Thank you for your response.
Khai.
khaino said:
Sorry I didn't explain in details, I am on pc Odin version 3.07 and clicked on PDA but the Abyss tar file is not appearing there even after unzipping it a couple of times on the desktop. Please let me know bro. Thank you for your response.
Khai.
Click to expand...
Click to collapse
.tar file is to be flashed with odin directly. It has an image inside and should not extract it. Should put the .tar file in one folder but not on desktop screen. Select pda box in odin and brow to the folder where you put .tar file. Should see it there.
BTW, if flash using CWM failed again, then should use hg42 scanner to check if there is partition damage.
http://forum.xda-developers.com/showthread.php?t=1823918
Update.
forest1971 said:
.tar file is to be flashed with odin directly. It has an image inside and should not extract it. Should put the .tar file in one folder but not on desktop screen. Select pda box in odin and brow to the folder where you put .tar file. Should see it there.
BTW, if flash using CWM failed again, then should use hg42 scanner to check if there is partition damage.
http://forum.xda-developers.com/showthread.php?t=1823918
Click to expand...
Click to collapse
Thanks for your patience on your instruction, I actually was able to flash the Abysskernel that you gave me with ODIN and it went straight to the recovery mode, but then I can't install anything, then I put it back to download mode and tried to flash a Gingerbread ROM, but as always it got stucked at factoryfs.img. What do you think I can do bro? Please let me know about it. Thank you.
Khai.
khaino said:
Thanks for your patience on your instruction, I actually was able to flash the Abysskernel that you gave me with ODIN and it went straight to the recovery mode, but then I can't install anything, then I put it back to download mode and tried to flash a Gingerbread ROM, but as always it got stucked at factoryfs.img. What do you think I can do bro? Please let me know about it. Thank you.
Khai.
Click to expand...
Click to collapse
It seem to show you have an emmc brick, although using the partition scanner will confirm. The options are to send to ss service for warranty or to revise using repartition. For warranty you will need to reset flash counter using a jig.
Sent from my phone
Update and question.
forest1971 said:
It seem to show you have an emmc brick, although using the partition scanner will confirm. The options are to send to ss service for warranty or to revise using repartition. For warranty you will need to reset flash counter using a jig.
Sent from my phone
Click to expand...
Click to collapse
Hi bro,
I flashed the Abysskernel again and it went to Samsung Galaxy Note GT-N7000 logo with big Triangle at the bottom and it then goes to Android system recovery <3e>, then it looks like there is no option for me to access the SD card, but its own 16GB storage it came with and that one has CM10 in it. Tried to flash that, but it says "E:failed to verify whole-file signature". If I attempt to claim for warranty will Samsung know that I rooted it after clearing the binary counts? Please let me know. Thank you for your instructions. If there is anything else you want me to try out, please let me know. Thank you.
Khai.
khaino said:
Hi bro,
I flashed the Abysskernel again and it went to Samsung Galaxy Note GT-N7000 logo with big Triangle at the bottom and it then goes to Android system recovery <3e>, then it looks like there is no option for me to access the SD card, but its own 16GB storage it came with and that one has CM10 in it. Tried to flash that, but it says "E:failed to verify whole-file signature". If I attempt to claim for warranty will Samsung know that I rooted it after clearing the binary counts? Please let me know. Thank you for your instructions. If there is anything else you want me to try out, please let me know. Thank you.
Khai.
Click to expand...
Click to collapse
Once reset flash counter the triangle will go and you can flash a stock kernel find link from dr.ketan toolbox, then it is ok to send to warranty.
Sent from my phone
Update.
forest1971 said:
Once reset flash counter the triangle will go and you can flash a stock kernel find link from dr.ketan toolbox, then it is ok to send to warranty.
Sent from my phone
Click to expand...
Click to collapse
Hi bro, it somehow managed to get on CWM and but any flashing was aborted. And tried to flash Criskelo, but got stuck at installing, no progress. What should I do? Thank you.
Just two options above, warranty or repartition.
Sent from my phone
Hello,
I have 2 days reading and trying above whole indexed google sites about my problem and can't solve it. So I decided to make a new thread here asking for some help before to try some stpud thing and f**k it worst!
I was using CM9 on my SGN arround 2 months. 2 days ago I was cheking some thing on facebook (using phone) and phone simple stucks! I wait some seconds and as it didnt solves alone I take the battery out and them put again... Since this, when I try to power up phone, I just get the "Samsung Galaxy Note GT-N7000" image!
Immediatly I tryed to make a wipe using 3 button combination but phone didnt go to recovery mode. When I use VOL UP + HOME + PWR, it displays logo, reboot, display logo againand stuck there! When I try to power up, it just show logo and stuck there.
The only "good" thing is that phone stills going to Download Mode when I use VOL DOWN + HOME + PWR.
I already tryed to flash with stock ICS version that I was using before apply CM, also tryed with GB stock (pre-rooted and non-rooted). Laso tryed flash PIT and PhilZ-cwm6... I dont know what more to try!
Please, I will appreciate if anyone can help me!
B.R.
what is happening when you tried the pre rooted GB Rom? odin logs. plz
Have you first tried just to flash a kernel tar file in pda through Odin. Then see if you can get into cwm recovery
nokiamodeln91 said:
what is happening when you tried the pre rooted GB Rom? odin logs. plz
Click to expand...
Click to collapse
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000UBLC2_N7000UBLB2_N7000UVCLC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/077> Odin v.3 engine (ID:77)..
<ID:0/077> File analysis..
<ID:0/077> SetupConnection..
<ID:0/077> Initialzation..
<ID:0/077> Get PIT for mapping..
<ID:0/077> Firmware update start..
<ID:0/077> cache.img
<ID:0/077> NAND Write Start!!
<ID:0/077> factoryfs.img
<ID:0/077> hidden.img
<ID:0/077> modem.bin
<ID:0/077> zImage
<ID:0/077> RQT_CLOSE !!
<ID:0/077> RES OK !!
<ID:0/077> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/077> Removed!!
numbnutsuk said:
Have you first tried just to flash a kernel tar file in pda through Odin. Then see if you can get into cwm recovery
Click to expand...
Click to collapse
Also tryied with SGN_XX_OXA_KJ1_FACTORYFS.
Same problem as before!
yeah all looks ok. now in gb rom boot to recovery and do a factory wipe
nokiamodeln91 said:
yeah all looks ok. now in gb rom boot to recovery and do a factory wipe
Click to expand...
Click to collapse
Immediatly I tryed to make a wipe using 3 button combination but phone didnt go to recovery mode. When I use VOL UP + HOME + PWR, it displays logo, reboot, display logo againand stuck there! When I try to power up, it just show logo and stuck there.
Keep holding the volume up power and home key and don't let go until you see it boot into recovery. Keep the buttons pressed down.
Then wipe cache. Full data wipe. And dalvic cache
numbnutsuk said:
Keep holding the volume up power and home key and don't let go until you see it boot into recovery. Keep the buttons pressed down.
Then wipe cache. Full data wipe. And dalvic cache
Click to expand...
Click to collapse
I hold it for 3 minutes and I only see the N7000 logo... Exactly as before...
alvaro.c said:
I hold it for 3 minutes and I only see the N7000 logo... Exactly as before...
Click to expand...
Click to collapse
As soon as you see the first N7000 logo, let go of the three buttons. Only then itll enter recovery. I was confused with the same issue too before. Try and report
Keep trying you'll get it.
When you flash in Odin via download mode, did you follow dr.ketan's guide?
Sent from my GT-N7000 using Tapatalk 2
asf58967 said:
When you flash in Odin via download mode, did you follow dr.ketan's guide?
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
You mean that guide: http://forum.xda-developers.com/showthread.php?t=1424997 ?
I try. But my problem is that I cant go into recovery mode using 3 buttons... There is any way to force recovery mode using any other software?
Please, any one can help me...
My phone stills dead!
helllllllllllllp!
I think the ROM you are flashing with Odin has a bad md5 because it successfully flashes and you are still having issues...
Did you check the md5 sum? And you put it in PDA when you flashed?
Sent from my GT-N7000 using Tapatalk 2
asf58967 said:
I think the ROM you are flashing with Odin has a bad md5 because it successfully flashes and you are still having issues...
Did you check the md5 sum? And you put it in PDA when you flashed?
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
I tryed with different ROMs and checked many times where Iam putting files.. Iam doing nothing wrong... Files was downloaded from here and most of them was checked before...
Do you have a raised flash counter in download mode?
Sent from my GT-N7000 using xda app-developers app
shoey63 said:
Do you have a raised flash counter in download mode?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
No.
It is an strange think... Every time I put download mode I see:
ODIN MODE
PRODUCT NAME: GT-N7000
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
Why this?
alvaro.c said:
You mean that guide: http://forum.xda-developers.com/showthread.php?t=1424997 ?
I try. But my problem is that I cant go into recovery mode using 3 buttons... There is any way to force recovery mode using any other software?
Click to expand...
Click to collapse
Some case with similar problem were solved using a full-wipe rom. Go back to the thread by Dr.ketan choose a full-wipe rom. Perhaps it could helps to get back the recovery mode.
Sending from my phone
Check out my instructions in this threadhttp://forum.xda-developers.com/showthread.php?t=1970878 It might work for you.
Thats why I asked about flash counter. Yours is as stock at the moment and my steps wont raise it. (just in case you can get warranty if required)
Sent from my GT-N7000 using xda app-developers app
Hi!!
First, I was trying to find some solution, here and google, but every one that could work, don´t.
I was trying to install CyanogenMod 10.1
I followed the installation guide... but when I have to choose CM zip file, I choosed another one from other sell (I was using the same card)
The CM that I use was this: cm-7.2.0-jordan.zip (from a defy phone)
instead cm-10.1-20130621-NIGHTLY-janice.zip
Everything goes bad since that.
I tried to wipe data/factory reset:
E: format_volume: fs_type "ext3" unsupported
E: Can´t mount /cache/reovery/log
E: Unknow fs_type "ext3" for /cache
I tried to update from external storage
But only shows me this: " ../ "
I tried to apply update from ADB
I followed the guide, copy the roms on self directory, put the 4 files on c:\windows , etc.
This are the common errors that shows me:
C:\Windows\Herramientas Sideload>adb sideload gapps-jb-2013
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
* failed to write data 'protocol fault (no status)' *
I tried kill the adb.exe like this, but doesn´t works
error: closed adb
I tried this but doesn´t works
I found nothing that could help more, so that´s way I making this post.
Here is some data:
GT-i9070
Windows 7 64bits
Kies updated (but could connect to the device now)
I think that drivers of the cell are updated, because windows shows me that... buy i don´t know if is the correct one.
I will be very grateful if you can help. I hope this can be fixed ..
Best regards!!
PS: sorry my english.
Can you enter in download mode with vol down+home+power when phone is switched off?
I didn´t know that.
Yes, now is in downloading mode:
Do not turn off target.
My pc can´t recognize it
Mr.BUBU said:
I didn´t know that.
Yes, now is in downloading mode:
Do not turn off target.
My pc can´t recognize it
Click to expand...
Click to collapse
Reflash stock jelly bean with Odin, then flash CoCore kernel for CWM recovery, and retry to flash CM10.1. To do that:
1-Because your pc doesn't recognize the device uninstall Kies and install only usb drivers (you can download install package here)
2-Download Odin and i9070 Stock Jelly Bean firmware from samfirmware (I recommend i9070XXLQG PDA)
3-Extract downloaded zip, you will find three files (one .dll, one .pit and one .tar.md5)
4-Launch Odin, select "Re-Partition" and leave others as they are. Press "PIT" button and select .pit file in extracted firmware's zip file, then press "PDA" and select .tar.md5 file in same directory.
5-Enter in download mode like I said you early and connect device to pc, press "Start" button on Odin and wait for the "SUCCESS" message, now your phone should power on normally.
6-Now download this zip file (for obtain root access) and put in sd card (micro sd, not internal memory!)
7-Turn off your phone, press vol up+home+power to enter recovery, select "apply update from external storage" then select root.zip, reboot device.
8-Now you have stock jelly bean rooted, update SuperSU from Google Play and install Universal Kernel Flash from frapeti (you can find it on Play Store).
9-Download CoCore Kernel here, take kernel.bin.md5 file from zip package and put it in internal storage.
10-Launch Universal Kernel Flash, select kernel.bin.md5 and flash it.
11-Power off phone and enter again in recovery with vol up+home+power, now you should have CWM-based recovery, select "backup and restore" and take a full system backup.
12-Wipe data, cache and dalvik and retry to install CM10.1-janice, in case something goes wrong or you want to remove CM without flash again with Odin you can restore your system backup from CWM.
If you have a doubt I'm here to help you
Problem:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9070XXLQG_I9070OXXLQG_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.img.md5
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
8(
There wasn´t a .pít file on the i9070XXLQG
I found one from Odin3-v1.85.zip
Could be that why is wrong? I´m downloading one more... this time without the Kies sign. I bet that is the probelm.
it´s getting worst
Now when I turn on the phone, the screen looks with diagonals strips.
And only the download mode is working... no more for upload mode.
:crying:
Well... i was looking for that error... and could be the cable and the usb port.
I changed each one, and still don´t works.
Remove the SD, remove the sim, and every time get me the same error.
Anything else?
Which .pit you have? The name of the correct one is: GT-I9070_EUR_XX_8G.pit for 8GB memory. Your have 8GB or 16GB of memory?
This one, but it came with the odin... I think.
u1_02_20110310_emmc_EXT4.pit
I will look for the correct one :good:
Mr.BUBU said:
This one, but it came with the odin... I think.
u1_02_20110310_emmc_EXT4.pit
I will look for the correct one :good:
Click to expand...
Click to collapse
Always use specific pit file of a device, each Samsung device have it, for example I can't use i9000's pit file on i9070. Which model is? 8 or 16? Because the two models have different pit file
Now I know...
8gb model.
Mr.BUBU said:
Now I know...
8gb model.
Click to expand...
Click to collapse
Okay, the correct file is the one that I said you, you can find it here on xda or with Google, I have it on pc (I'm writing with phone) but here in Italy is too late and I'm going to sleep if you can't find it I can upload it for you
THANKS YOU
THANKS YOU
THANKS YOU
THANKS YOU
THANKS YOU
THANKS YOU
:laugh:
It´s alive !!!
And with CyanoGen working
I had to avoided some steps, because no one version let me get in the Os. Every each stop working when complete the time of the cell. Never been able to install Super Su for example.
So... I take the CM janice and the gapps cyano and at least is working. :victory:
Now to test and re test... before installing everything else.
Thanks you so much. I was affraid to had broke the cell for ever.
You really known about this... thanks for help me :good:
Mr.BUBU said:
THANKS YOU
Click to expand...
Click to collapse
next time, don't mix up the devices, files or steps. then you'll be fine.
Sent from a rice cooker
Mr.BUBU said:
THANKS YOU
THANKS YOU
THANKS YOU
THANKS YOU
THANKS YOU
THANKS YOU
:laugh:
Click to expand...
Click to collapse
Excellent, next time be careful when you're flashing roms
Thanks for the advice harith.unnikrishnan and Tesla-MADAL93
I have root some, but never flash roms. Always there is a first time... in my case was catastrophic
Best regards!!
Mr.BUBU said:
Thanks for the advice harith.unnikrishnan and Tesla-MADAL93
I have root some, but never flash roms. Always there is a first time... in my case was catastrophic
Best regards!!
Click to expand...
Click to collapse
Don't worry, the important is that now it works
Mr.BUBU said:
Thanks for the advice harith.unnikrishnan and Tesla-MADAL93
I have root some, but never flash roms. Always there is a first time... in my case was catastrophic
Best regards!!
Click to expand...
Click to collapse
It was not catastrophic. It would be if you flashed wrong firmware with Odin. :silly:
shut_down said:
It was not catastrophic. It would be if you flashed wrong firmware with Odin. :silly:
Click to expand...
Click to collapse
I agree with you, shut_down
i was want just change my old recovery software, so i install TWRP recovery that time i facing this problem.
This worked out once, then I was trying another firmware, this didn't work out (phone was hanging at the Samsung GT-I9070 start-screen), so I thought: "OK, lets do the other firmware again".
So entered the download mode and tried to flash the "old" firmware again (XXLD1.tar) but it just does something very fast (not really installing) and reboots again with hanging at the start screen.
OK, so lets got to the "recovery-mode"... not possible!
Did this now a few times, but everytime the same result, just a quick full download bar and restarting with hanging.
Did I kill my phone?
ODIN look also fine...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> xxld1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> kernel.bin.md5
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
PLEASE HELP ME!!!
saha.gobinda89 said:
i was want just change my old recovery software, so i install TWRP recovery that time i facing this problem.
This worked out once, then I was trying another firmware, this didn't work out (phone was hanging at the Samsung GT-I9070 start-screen), so I thought: "OK, lets do the other firmware again".
So entered the download mode and tried to flash the "old" firmware again (XXLD1.tar) but it just does something very fast (not really installing) and reboots again with hanging at the start screen.
OK, so lets got to the "recovery-mode"... not possible!
Did this now a few times, but everytime the same result, just a quick full download bar and restarting with hanging.
Did I kill my phone?
ODIN look also fine...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> xxld1.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> kernel.bin.md5
<ID:0/005> RQT_CLOSE !!
<ID:0/005> RES OK !!
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
PLEASE HELP ME!!!
Click to expand...
Click to collapse
if u r eble to boot u r phone in to download mode then its not being bricked i think u r not flashed file properly
Step-1: Download Android Jelly Beanofficial firmware for Samsung Galaxy S Advance to the computer
Step-2: Extract the downloaded zip file using Winzip, Winrzr, 7zip or any other extracting tool to get a file with .tar.md5 extension
Step-3: Download latest Odin software which will help to install the Jelly Bean firmware. Extract the Odin zip to getOdin exe
Step-4:Switch off the Galaxy S Advance and wait for five to six seconds for the vibration to confirm the power off
Step-5:Boot the phone into Download Mode by pressing and holdingVolume Down,HomeandPowerbuttons together. A warning screen will appear, now press theVolume Upbutton to continue to enter into Download Mode
Step-6:RunOdin.exe as an Administrator
Step-7:Connect the Galaxy S Advance to the computer using USB cable while the device is in Download Mode. Wait for some time until Odin detects the device. When the device is connected successfully, an Added message will appear under Odin. Also, the ID: COM box in Odinwill turn blue indicating all the drivers are installed successfullyNote:If theAddedmessage does not appear, then try the USB port at the back of the computer. In case Odin still fails to recognsie the device, then re-install USB driver.
Step-8:Click thePDAbutton and select the (tar.md5 file)
step-9: Verify that Auto Rebootand F.Reset Timecheckboxes are selected in Odin window. Also, ensure that the Re-Partition option is unchecked
Step-10:When everything is set, hit theStartbutton in Odin. The installation process should begin now and would take few minutes to complete
Step-11 once the installation process is completed, the phone will reboot automatically. And soon a PASS message with green background will appear in the extreme left box at the very top of Odin indicating successful installation.
phone get rebooted with samsung logo
Now safely unplug the USB cable from the phone to disconnect it from the computer
How to Fix Bootloop Issues
1) While installing the firmware if thePASSmessage does not display or the device gets stuck for a long time, then disconnect the phone from the computer. Remove the battery and re-insert it, check the USB connection, re-install the USB driver and disable KIES. Enter Download Mode and repeat the whole procedure.
2) If bootloop occurs or the device is stuck in welcome screen logo, then boot the phone into recovery mode. To do so, press and hold theVolume Up,HomeandPowerbuttons together. In recovery mode, perform data wiping task by selectingWipe data/factory resetthen selectWipe Cache Partition.Reboot the phone in normal mode by selectingreboot system now.When the phone boots up, it should be running on the official build. In recovery mode, useVolumekeys to scroll between the options and use thePowerbutton to select the particular option. Performing wiping task will erase the internal memory of the device.
Just flash firmware with odin, after it says "pass", remove cable and let your device boot and mostly (a.f.a.i.k) it doesn't boot, take out battery, go to recovery mode and wipe data/factory reset and after that reboot your phone.
sent with my S Advance
nalityta collect
Thank you very much my phone is now okay.......:laugh::good::angel:
saha.gobinda89 said:
Thank you very much my phone is now okay.......:laugh::good::angel:
Click to expand...
Click to collapse
just press thnx button if u can
Now i am facing another problem, my samsung galaxy s advance is 16 GBbut when i format my USB storage its show that 3.92 GB.....what can i do now. where is my rest of the storage 7 GB.......
PLEASE HELP ME.......
saha.gobinda89 said:
Now i am facing another problem, my samsung galaxy s advance is 16 GBbut when i format my USB storage its show that 3.92 GB.....what can i do now. where is my rest of the storage 7 GB.......
PLEASE HELP ME.......
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2096093
dimentl under
How to Update my samsung galaxy s advance gt i9070 16 GB Android jelly bean 4.1.2 to kitkat 4.4.2..... help me
give me solution in easy way....... plz help me
saha.gobinda89 said:
How to Update my samsung galaxy s advance gt i9070 16 GB Android jelly bean 4.1.2 to kitkat 4.4.2..... help me
give me solution in easy way....... plz help me
Click to expand...
Click to collapse
Just install CM11 zip from recovery. That is if the phone is I9070, and not I9070P.
Sent from my GT-I9070 using Tapatalk
shut_down said:
Just install CM11 zip from recovery. That is if the phone is I9070, and not I9070P.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
i don't understand what you say plz give me better solution for this.....
saha.gobinda89 said:
i don't understand what you say plz give me better solution for this.....
Click to expand...
Click to collapse
Well, now can I ask? Is your device is Galaxy S Advance GT-I9070 series (not GT- i9070P series - NFC supports)? And has installed the official firmware 4.1.2+ (jelly bean)?
If your device is GT-I9070, and has installed the first official firmware 4.1.2+ (jelly bean). Then simply you do the installation via CWM Recovery which is certainly already installed on your device. after all these, then you can feel the sweetness of chocolate kitkat (CM11) style developers. Like what was mentioned by senior @shut_down before.
TPD-21 said:
Well, now can I ask? Is your device is Galaxy S Advance GT-I9070 series (not GT- i9070P series - NFC supports)? And has installed the official firmware 4.1.2+ (jelly bean)?
If your device is GT-I9070, and has installed the first official firmware 4.1.2+ (jelly bean). Then simply you do the installation via CWM Recovery which is certainly already installed on your device. after all these, then you can feel the sweetness of chocolate kitkat (CM11) style developers. Like what was mentioned by senior @shut_down before.
Click to expand...
Click to collapse
Yes, My device is Galaxy S Advance GT-I9070, 16 GB And has installed the official firmware 4.1.2+ (jelly bean). can you give proper download link kitkat (CM11) and give whole process by CWM method for install kitkat 4.4.2 or update version in my device.
saha.gobinda89 said:
Yes, My device is Galaxy S Advance GT-I9070, 16 GB And has installed the official firmware 4.1.2+ (jelly bean). can you give proper download link kitkat (CM11) and give whole process by CWM method for install kitkat 4.4.2 or update version in my device.
Click to expand...
Click to collapse
Look for CM11 bt TeamCanjica in original development section, put it in sd card, boot to recovery and install it with "update from external storage" or qhatever it was in stock recovery. Do factory reset and that should be it. If still not working go to cwm and wipe dalvik cache.
Sent from my GT-I9070
saha.gobinda89 said:
Yes, My device is Galaxy S Advance GT-I9070, 16 GB And has installed the official firmware 4.1.2+ (jelly bean). can you give proper download link kitkat (CM11) and give whole process by CWM method for install kitkat 4.4.2 or update version in my device.
Click to expand...
Click to collapse
Sorry I'm late replying. Yes, do as senior @shut_down mentioned above.
÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷
Sent From Glonass Satellite
÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷÷
kitkat install
shut_down said:
Look for CM11 bt TeamCanjica in original development section, put it in sd card, boot to recovery and install it with "update from external storage" or qhatever it was in stock recovery. Do factory reset and that should be it. If still not working go to cwm and wipe dalvik cache.
Sent from my GT-I9070
Click to expand...
Click to collapse
please give me download link CM11 or kitkat 4.4.2 install software.
saha.gobinda89 said:
please give me download link CM11 or kitkat 4.4.2 install software.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2578599
thanks
shut_down said:
http://forum.xda-developers.com/showthread.php?t=2578599
Click to expand...
Click to collapse
Thanks Man....
Kitkat rom
shut_down said:
http://forum.xda-developers.com/showthread.php?t=2578599
Click to expand...
Click to collapse
which one is best for Samsung galaxy S advance Cyanogenmod_Kitkat ROM or Omni_Kitkat ROM Please tell me and which is battery support will be good. if think that any of them one good then give me download link. pls help me.
saha.gobinda89 said:
which one is best for Samsung galaxy S advance Cyanogenmod_Kitkat ROM or Omni_Kitkat ROM Please tell me and which is battery support will be good. if think that any of them one good then give me download link. pls help me.
Click to expand...
Click to collapse
You should try yourself. It depends on your usage. And there is no such thing as best rom. You have our development and original development sections and look there.
Sent from my GT-I9070
looking for kitkat
shut_down said:
You should try yourself. It depends on your usage. And there is no such thing as best rom. You have our development and original development sections and look there.
Sent from my GT-I9070
Click to expand...
Click to collapse
where i looking.... give me download link...