Database Develop

[Q] [Jellybean XXLS2 Stock Rom] flashing to XXLRK

can this Rom be flashed to my XXLRK note?
thanks in advance guys

As its a stock rom.... yes..

Thanks!
Sent from my GT-N7000 using xda app-developers app

They are BOTH note 1 roms ,right ??
Sent from my GT-N7000 using Tapatalk 2

yes its the new JB leak for note n7000..
http://forum.xda-developers.com/showthread.php?t=1953847 thanks eyebee

I flashed the jb rom from an LRK ;Cassie's. Did full wipe and it is superb!
Mines eybees too :thumbup::thumbup::thumbup:
Sent from your attic.....

Steps to flash please confirm :
1: on stock ICS , factory reset from settings .
2: flash the stock JB via Odin PC
3: full wipe from cwm recovery (no brick now ???)
Please confirm
Thanks in advance

samo_gf said:
Steps to flash please confirm :
1: on stock ICS , factory reset from settings .
2: flash the stock JB via Odin PC
3: full wipe from cwm recovery (no brick now ???)
Please confirm
Thanks in advance
Click to expand...
Click to collapse
NO! Don't ever.....ever, ever, ever, ever perform a factory reset from the settings menu while using a stock ics UNLESS you have flashed a safe kernel with the infamous emmc brick bug command removed.

Att.Fan1982 said:
NO! Don't ever.....ever, ever, ever, ever perform a factory reset from the settings menu while using a stock ics UNLESS you have flashed a safe kernel with the infamous emmc brick bug command removed.
Click to expand...
Click to collapse
Suggest me the best one please

its a flashable zip that u can flash with CWM.
---------- Post added at 03:32 AM ---------- Previous post was at 03:31 AM ----------
be on a safe kernel. do a wipe, factory reset, dalvik, then install zip from sd
---------- Post added at 03:32 AM ---------- Previous post was at 03:32 AM ----------
be on a safe kernel. do a wipe, factory reset, dalvik, then install zip from sd

samo_gf said:
Suggest me the best one please
Click to expand...
Click to collapse
Flash hydracore kernel on ics,then perform all wipes and flash the jb rom

Best choice. Tried to keep it on jb ,but cannot for some reason.
Sent from your attic.....

Help me to choose!!!

Hello!
I have N7000XXLQ3_N7000OXXLP7_COA.
I want to:
1. Root my N7000 phone using ODIN.
2. Flash a good kernel.
3. Improve cpu speed!
Can u help me, please?!
Txs a lot!

I see that u have posted in the philz thread as well. If u want to wait for him to cook the kernel for u the n Ok. as it can be flashed directly from stock recovery and u will get root and safe kernel as well.
If u want to overclock cpu then after u gain root install hydracore.
If u don't want to wait then root using Dr ketans method
---------- Post added at 05:42 PM ---------- Previous post was at 05:40 PM ----------
http://forum.xda-developers.com/showthread.php?t=1424997
or u can upgrade to 404 and then choose a philz kernel already available

[Q] Newbie question about Kernels and ROMs

Still foggy about Kernels and ROMs.
I recently installed 3.0.36_HydraCore_v5.34 kernel on my GT-N700 which was already running ICS 4.0.4 Baseband version N7000XXLS1 and it seems very stable.
However, I wanted to try the Speedmod JB ROM from Cursed4Eva and saw that it required installing a supplied kernel first. I assumed this is because the kernel and ROM have been developed together for compatibility. (Not sure if I assume correctly or if I'm using the correct terminology).
It all worked fine until I tried to re-install the HydraCore kernel after which the phone wouldn't boot. (I recovered easily using a Nandroid backup with ROM Manager).
My question is, is it always the best practice to install the recommended kernel (if any) when flashing a new ROM and not to try re-installing say, the Hydracore afterwards? The HydraCore claims to be compatible with any ROM but either it isn't compatible with the JB ROM or I'd doing something wrong (more likely).
Any advice would be most appreciated.
Trevor

I don't know what is a speedmod jb rom.
but if it's based on the latest samsung stock touchwiz jellybean rom, the hydracore is not compatible with it. current safe kernel is only philz xxls2/xxls7. If the phone is not booting the boot into recovery and flash the rom again
---------- Post added at 06:54 PM ---------- Previous post was at 06:53 PM ----------
hydracore is compatible with most of the roms except the Samsung JB touchwiz as the kernel sources are not released as of yet. Once it does, dev will make it compatible for it too

Thank you. That makes sense. I still have a lot to learn.
Trevor
PS I would have hit thnks but can't see the button on my screen.
nokiamodeln91 said:
I don't know what is a speedmod jb rom.
but if it's based on the latest samsung stock touchwiz jellybean rom, the hydracore is not compatible with it. current safe kernel is only philz xxls2/xxls7. If the phone is not booting the boot into recovery and flash the rom again
---------- Post added at 06:54 PM ---------- Previous post was at 06:53 PM ----------
hydracore is compatible with most of the roms except the Samsung JB touchwiz as the kernel sources are not released as of yet. Once it does, dev will make it compatible for it too
Click to expand...
Click to collapse

My phone boot just into CWM; need help

hey guys
im new here
yesterday i downloaded the app ROM MANAGER, because i would like to go to CWM.
Then i was there and later i cant boot the phone normally.
i have JB XXLQB and cocore kernel. but before i havent any problems.
Today i tried to flash the official xxlqp again via odin, but i cant because in odin there was not writing ADDED
then tried to flash a custom rom (pure vanilla v3), but again just in CWM :crying:.
I need help, please
Edit: is that a brick ?
And sorry for my bad english im from germany

You actually downloaded ROM Manager? Oh god.
Did you try flashing stock from CWM... Here's a stock LQB firmware flashable zip: http://hotfile.com/dl/198627441/57a...om-GT-I9070-TSR-I9070XXLQB-1361861136.zip.htm

guyshelpmeplease said:
hey guys
im new here
yesterday i downloaded the app ROM MANAGER, because i would like to go to CWM.
Then i was there and later i cant boot the phone normally.
i have JB XXLQB and cocore kernel. but before i havent any problems.
Today i tried to flash the official xxlqp again via odin, but i cant because in odin there was not writing ADDED
then tried to flash a custom rom (pure vanilla v3), but again just in CWM :crying:.
I need help, please
Edit: is that a brick ?
And sorry for my bad english im from germany
Click to expand...
Click to collapse
Please search the concerned thread before creating new threads. The answer your looking for is already there in the CoCore Kernel thread:
http://forum.xda-developers.com/showpost.php?p=37782738&postcount=5
Download the file and put it in your external SD card and flash it in recovery
---------- Post added at 03:10 PM ---------- Previous post was at 03:06 PM ----------
panda00 said:
You actually downloaded ROM Manager? Oh god.
Did you try flashing stock from CWM... Here's a stock LQB firmware flashable zip: http://hotfile.com/dl/198627441/57a...om-GT-I9070-TSR-I9070XXLQB-1361861136.zip.htm
Click to expand...
Click to collapse
LOL we posted at the same time :silly:. I think that he downloaded ROM Manager to boot into CWM and not to install it because he says that he uses CoCore kernel. So just flashing the reboot-system-cwm.zip file should be enough.

Abhinandh Ajay said:
Please search the concerned thread before creating new threads. The answer your looking for is already there in the CoCore Kernel thread:
http://forum.xda-developers.com/showpost.php?p=37782738&postcount=5
Download the file and put it in your external SD card and flash it in recovery
---------- Post added at 03:10 PM ---------- Previous post was at 03:06 PM ----------
LOL we posted at the same time :silly:. I think that he downloaded ROM Manager to boot into CWM and not to install it because he says that he uses CoCore kernel. So just flashing the reboot-system-cwm.zip file should be enough.
Click to expand...
Click to collapse
Thanks its working!

That happened to me too but for other reazons. I installed this https://play.google.com/store/apps/details?id=com.scartech.holoreboot app from market, then I went to recovery using the app and got stucked in CWM. Strange thing it's I'm still using a previous version of cocore kernel (4.4) but I fixed that using the same .zip
Sent from my GT-I9070 using xda app-developers app

I took the card out to put the file reboot.system-cwm.zip from cocafe, but now my phone no longer recognize thge external SD.
How to proceed?
---------- Post added at 12:01 PM ---------- Previous post was at 11:39 AM ----------
I solved it with adb shell thanks Shut_down thread.

[Q] Problem with SpeedMod and Odin with my Galaxy Note (N7000)

Hi,
I've followed the guide to install the speedmod kernel on my Galaxy Note on http://forum.xda-developers.com/showthread.php?t=1673072, using odin, but I have a problem: after Odin said that all was good, the phone is unable to reboot and for 5-6 seconds stay with the screen with the "yellow triangle" and then shut-down.
How can I solve this problem?Or come back to original kernel?
Please help me!!

gunela88 said:
Hi,
I've followed the guide to install the speedmod kernel on my Galaxy Note on http://forum.xda-developers.com/showthread.php?t=1673072, using odin, but I have a problem: after Odin said that all was good, the phone is unable to reboot and for 5-6 seconds stay with the screen with the "yellow triangle" and then shut-down.
How can I solve this problem?Or come back to original kernel?
Please help me!!
Click to expand...
Click to collapse
What rom were you on?

nokiamodeln91 said:
What rom were you on?
Click to expand...
Click to collapse
I had the original rom!

gunela88 said:
I had the original rom!
Click to expand...
Click to collapse
Ofcourse.. but which one? JB, GB, ICS?

nokiamodeln91 said:
Ofcourse.. but which one? JB, GB, ICS?
Click to expand...
Click to collapse
I forgot to specify it: I had the original ICS rom

gunela88 said:
I forgot to specify it: I had the original ICS rom
Click to expand...
Click to collapse
You 100 % sure it was ICS? Install the rom you were on again using odin. Its will put back the original kernel. Just dont wipe while on ICS stock kernel.

nokiamodeln91 said:
You 100 % sure it was ICS? Install the rom you were on again using odin. Its will put back the original kernel. Just dont wipe while on ICS stock kernel.
Click to expand...
Click to collapse
I've check with my brother that has the same original rom (he has a Samsung S2)...and I discover that I had Android 4.1.2 that means JB! :/
Have I to install the JB rom with odin in the same way?
Thanks a lot for your help!

nokiamodeln91 said:
You 100 % sure it was ICS? Install the rom you were on again using odin. Its will put back the original kernel. Just dont wipe while on ICS stock kernel.
Click to expand...
Click to collapse
I've done what you said and ALL WORKS NOW!!
Thank you so much for your help!
Can you suggest me a good rom to install, without doing same errors!? (maybe this could be my last question! )

In this case you just have to flash the JB Speedmod kernel the same way you flash previous one. The phone is not booting because of having an ICS kernel on JB rom.
---------- Post added at 01:49 AM ---------- Previous post was at 01:47 AM ----------
gunela88 said:
I've done what you said and ALL WORKS NOW!!
Thank you so much for your help!
Can you suggest me a good rom to install, without doing same errors!? (maybe this could be my last question! )
Click to expand...
Click to collapse
If you want all the Samsung features then check AryaMod rom.
If you are OK with AOSP, cm 10.2 or omni 4.4 are great roms. It's up to you to try and decide which one suits you the best.
This time for rooting and cwm, use Philz kernel. Methods and explanation in his thread in the Original Development Section.

nokiamodeln91 said:
In this case you just have to flash the JB Speedmod kernel the same way you flash previous one. The phone is not booting because of having an ICS kernel on JB rom.
---------- Post added at 01:49 AM ---------- Previous post was at 01:47 AM ----------
If you want all the Samsung features then check AryaMod rom.
If you are OK with AOSP, cm 10.2 or omni 4.4 are great roms. It's up to you to try and decide which one suits you the best.
This time for rooting and cwm, use Philz kernel. Methods and explanation in his thread in the Original Development Section.
Click to expand...
Click to collapse
Sure, I'm very ok with AOSP and I was thinking about cm 10.2!
Please, clear me up if first of all I have to install the Philz kernel or the rom cm 10.2! (that wasn't the last question! )

First root using Philz kernel.. Then back up your efs folder. Then flash the rom or your choice. Custom rom can only be flashed using cwm recovery.

AryaMod v3 is very good and smooth stock LTA based TW rom. I'm on it since it was issued. As the owner set v4 will be issued in few days. You can try it.
Sent from my GT-N7000 using XDA Premium 4 mobile app