My G-note (N7000) got crashed, please help me………… :crying::crying:
After flash N7000XXLS2 my G-Note not booting up anymore. It’s stuck on Samsung logo after the boot animation.
Please help me to load N7000XXLS2 or go back to ICS.
Thanks in advance.
musheercmr said:
My G-note (N7000) got crashed, please help me………… :crying::crying:
After flash N7000XXLS2 my G-Note not booting up anymore. It’s stuck on Samsung logo after the boot animation.
Please help me to load N7000XXLS2 or go back to ICS.
Thanks in advance.
Click to expand...
Click to collapse
Firstly, wrong thread you posted...you should post it in General Thread.
Secondly, try flash an ICS ROM using PC Odin...you can download your regional ROM at http://www.sammobile.com/firmware/
lhooipg said:
Firstly, wrong thread you posted...you should post it in General Thread.
Secondly, try flash an ICS ROM using PC Odin...you can download your regional ROM at http://www.sammobile.com/firmware/
Click to expand...
Click to collapse
sorry for wrong place.
I was trying to Flash ICS ROM by Odin-3. but failed too
musheercmr said:
sorry for wrong place.
I was trying to Flash ICS ROM by Odin-3. but failed too
Click to expand...
Click to collapse
Read through general section first. There are numerous posts dealing with the issue.
lhooipg said:
Firstly, wrong thread you posted...you should post it in General Thread.
Click to expand...
Click to collapse
The OP should post this in Q&A forum, not in General.
How did you flashed it? Custom or with odin. Do you have nandroid backup?
uggies said:
Read through general section first. There are numerous posts dealing with the issue.
Click to expand...
Click to collapse
@musheercmr
Just try going back to factory GB via PC Odin. Hope there's no severe problem.
I hope MODs won't be angry if replying questions in wrong thread.:angel::angel::angel:
Don't try to flash too many things.
Just try this once and let us know what happened.
Related
Hi,
I flashed my galaxy note using cfroot and had cwm installed.
Downloaded Mobile odin from the market also kl8 from here...
http://forum.xda-developers.com/showthread.php?t=1424997
Now I flashed my Note with the "CODE" tar file.
I did select ever root.
I have lost all my apps and cwm, I have superuser tho.
What did I do wrong? Why did I lose all data? How do I get cwm back?
Please I need help... anyone?
ashwin123 said:
Hi,
I flashed my galaxy note using cfroot and had cwm installed.
Downloaded Mobile odin from the market also kl8 from here...
http://forum.xda-developers.com/showthread.php?t=1424997
Now I flashed my Note with the "CODE" tar file.
I did select ever root.
I have lost all my apps and cwm, I have superuser tho.
What did I do wrong? Why did I lose all data? How do I get cwm back?
Please I need help... anyone?
Click to expand...
Click to collapse
This filmware is not rooted. Rooted it again with chainfire root. Wy did you do it like this? There are a lot of flashble kl8 with cwm.
i hav replied your Q here few min back.
Better such Q you shud start in QA section, here it is development
dr.ketan said:
i hav replied your Q here few min back.
Better such Q you shud start in QA section, here it is development
Click to expand...
Click to collapse
Oops sorry, honest mistake. Is there a way to move this?
robertberma said:
This filmware is not rooted. Rooted it again with chainfire root. Wy did you do it like this? There are a lot of flashble kl8 with cwm.
Click to expand...
Click to collapse
Can you give me a link to one of those?
So once I get the flashable kl8 with cwm i just need to follow the same mobile odin procedure like I did earlier?
Thanks for your help
Questions like this belong in Q&A, not in Development. Also, do not cross post. I'm moving this, take more care in the future to post in the appropriate subforum.
reinbeau said:
Questions like this belong in Q&A, not in Development. Also, do not cross post. I'm moving this, take more care in the future to post in the appropriate subforum.
Click to expand...
Click to collapse
Extremely sorry, didnt mean to post it in the wrong place, will not happen again!
tried going back to this Rocket Rom v22 from Rocket Rom ICS 1.5.
i flashed abyssnote 3.9. then immediately flashed RR v22 and now im stuck "installing modem" for thirty minutes and it is making no progress.
agrh..
did i just brick my phone? if not would pulling the battery and rebooting into something help or make matter worse?
whatever my next move is, i'd like to make sure it is the correct one.
help help help please and thank you!
jason
update: stuck for an hour. not sure what next step i should try.
restore ics? if so would i need to flash a new kernel? could i just do a factory wipe and repeat the process?
argh, please help.
question can be found here
NO FLASH!!!!!!! ICS Full Root Stock kernel LP1 I9220 and N7000
chris85e said:
question can be found here
NO FLASH!!!!!!! ICS Full Root Stock kernel LP1 I9220 and N7000
Click to expand...
Click to collapse
great, 92 pages to read through to find out what to do once you are stuck flashing modem when going from ics back to gb.
thanks...
jason370 said:
great, 92 pages to read through to find out what to do once you are stuck flashing modem when going from ics back to gb.
thanks...
Click to expand...
Click to collapse
Search the thread. It shouldn't take too long. I'd search for you but I'm on my phone. Good luck man.
Sent from my GT-N7000 using xda premium
There's about zero useful information in that thread, just to let you know. You're wasting your time.
smalmagal said:
There's about zero useful information in that thread, just to let you know. You're wasting your time.
Click to expand...
Click to collapse
Agreed, that thread was a waste of two hours and almost led me down a terrible path.
I fixed it...
Flashed abyss 3.9 again, full wipe (data, dvlik, partition) then flashed rrv22.
Boom, working.
Sent from my GT-N7000 using xda premium
The bricking only happened when using angelroms ICS kernels. A shame that happened
jason370 said:
whatever my next move is, i'd like to make sure it is the correct one.
help help help please and thank you!
jason
argh, please help.
Click to expand...
Click to collapse
flash to stock ROM firmware N7000XXKKA_N7000OXXKK5_ATO.zip via pc odin, then follow rooting
---------- Post added at 11:47 AM ---------- Previous post was at 11:39 AM ----------
jason370 said:
whatever my next move is, i'd like to make sure it is the correct one.
help help help please and thank you!
jason
argh, please help.
Click to expand...
Click to collapse
flash to stock ROM firmware N7000XXKKA_N7000OXXKK5_ATO.zip via pc odin, then follow rooting then upgrade to your favorite rom..
honf said:
The bricking only happened when using angelroms ICS kernels. A shame that happened
Click to expand...
Click to collapse
yeah... it "burnt" my SGN mainboard. Luckily SGN still new enough to replace a new mainboard for me.
jason370 said:
I fixed it...
Flashed abyss 3.9 again, full wipe (data, dvlik, partition) then flashed rrv22.
Boom, working.
Click to expand...
Click to collapse
What you actually tried to do initially was slap a GB Rom on top of the ICS one. That is not a done thing.
What you do when coming down from ICS is
1. flash Abyss
2. wipe everything, including your arse, to eliminate all ICS traces from your future GB
3. flash GB
No wonder you got stuck at boot.
then i installed a custom rom on my s2 lite, more came in infinite loop, hence I tried to restore by installing the JB odin again, so far so good, the problem q initializes after he returned out of the screen where do you configure the phone veiz first, he and the error back to the start, and without saying that he's in recovery mode error in the efs folder, I do not know what else to do. worth to us and the google translator, sorry for the bad writing.
Wrong forum. Here is Galaxy S Advance GT-I9070.
Powered by CM10.2
R_a_z_v_a_n said:
Wrong forum. Here is Galaxy S Advance GT-I9070.
Powered by CM10.2
Click to expand...
Click to collapse
S2 lite is what the S advance is called in Brazil
bobfrantic said:
S2 lite is what the S advance is called in Brazil
Click to expand...
Click to collapse
My apologies. This is when you start to read and write a reply when you not finished the morning coffee. Thanks Bob!
@OP: Tell us exactly which steps you followed.
R_a_z_v_a_n said:
My apologies. This is when you start to read and write a reply when you not finished the morning coffee. Thanks Bob!
@OP: Tell us exactly which steps you followed.
Click to expand...
Click to collapse
I am on my third cup LOL.....
I've got an S3 mini (i9180) and after flashing CM11 (It wasnt my first time) i lost this and now i cant make any mobile connection... I tried flashing back its factory rom but it isnt still fixed... It shows baseband version as xxxx... Please Help!!!
Thanks in forward for any replies!
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
BTW, I guess you are talking about I8190, right?
Stand by
Good luck
R_a_z_v_a_n said:
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
BTW, I guess you are talking about I8190, right?
Stand by
Good luck
Click to expand...
Click to collapse
@R_a_z_v_a_n IS this done automatically or I should wait or do it myself???
denis310502 said:
@R_a_z_v_a_n IS this done automatically or I should wait or do it myself???
Click to expand...
Click to collapse
Thread is already moved in the right forum. Now you must wait for answers from the owners/experts.
Good luck
baseband xxxx
The Q&A faq, top post on this page, has baseband and kernel flashable zips for your phone, I believe. Worth a try don't you think?
Hello !
Sorry to bother but when i flash this room (http://forum.xda-developers.com/note...ction-t3066794) i keep getting "Kernel is not seandroid enforcing" and my note 4 910T wont boot, it goes on bootloop. I tried flashing the kernel suggested on this thread before flashing this room and after flashing this room but no luck. I'm currently on Firekat N4ANK4V7, any help please. Since i'm a noob here i can't post on the real thread because of the noob thing
http://prntscr.com/6prp93
Anyones help would be greatful
Thanks
Gerti_id said:
Hello !
Sorry to bother but when i flash this room (http://forum.xda-developers.com/note...ction-t3066794) i keep getting "Kernel is not seandroid enforcing" and my note 4 910T wont boot, it goes on bootloop. I tried flashing the kernel suggested on this thread before flashing this room and after flashing this room but no luck. I'm currently on Firekat N4ANK4V7, any help please. Since i'm a noob here i can't post on the real thread because of the noob thing
http://prntscr.com/6prp93
Anyones help would be greatful
Thanks
Click to expand...
Click to collapse
When you get that message it means you don't have a stock kernel. Try flashing this kernel: http://forum.xda-developers.com/not...pment/kernel-bioshock-1-5-dec-4-2014-t2962744 in recovery, then wipe cache-dalvik.
polish_pat said:
When you get that message it means you don't have a stock kernel. Try flashing this kernel: http://forum.xda-developers.com/not...pment/kernel-bioshock-1-5-dec-4-2014-t2962744 in recovery, then wipe cache-dalvik.
Click to expand...
Click to collapse
Thanks @polish_pat, i'll try it
polish_pat said:
When you get that message it means you don't have a stock kernel. Try flashing this kernel: http://forum.xda-developers.com/not...pment/kernel-bioshock-1-5-dec-4-2014-t2962744 in recovery, then wipe cache-dalvik.
Click to expand...
Click to collapse
Tried that @polish_pat, no luck still in bootloop, but i'm able to flash firekat for n910t without any problems
Whats the rom you're having trouble with? Cause your link is broken
polish_pat said:
Whats the rom you're having trouble with? Cause your link is broken
Click to expand...
Click to collapse
Thanks for the reply here is the link http://forum.xda-developers.com/not...-vision-x-n4-intl-5-0-1-construction-t3066794
of the room i'm trying to install without success
Gerti_id said:
Thanks for the reply here is the link http://forum.xda-developers.com/not...-vision-x-n4-intl-5-0-1-construction-t3066794
of the room i'm trying to install without success
Click to expand...
Click to collapse
When you finish installing, power off phone, pull battery for atleast 20 minutes, then power it up. It should boot. The phone is getting hot. Known problem in that thread addressed countless times.
Sent from my SM-N910W8 using XDA Free mobile app
Gerti_id said:
Thanks for the reply here is the link http://forum.xda-developers.com/not...-vision-x-n4-intl-5-0-1-construction-t3066794
of the room i'm trying to install without success
Click to expand...
Click to collapse
I would try another rom and get a little bit of practice using odin and twrp and the basics before dealing with this or any other port rom.. Read the thread and see what has worked for some but not others. Make a efs backup before anything else.
BAD ASS NOTE 4
Thanks for the suggestions, even this doesn't seem to help me, i still can't boot this room. I got no problems with other rooms.
Gerti_id said:
Thanks for the suggestions, even this doesn't seem to help me, i still can't boot this room. I got no problems with other rooms.
Click to expand...
Click to collapse
I seen some of the stuff those guys gotta do to boot. Just wait for us to get lollipop. It be ur best safe bet.
BAD ASS NOTE 4
I'm new here, but i'm not a rookie on these things. I got a very smooth install on this other room that seems to run without any bug so far
http://forum.xda-developers.com/not...t-unmodified-port-sm-n910w8-lollipop-t3072920.
But anyway ur help is apreciated.
Gerti_id said:
I'm new here, but i'm not a rookie on these things. I got a very smooth install on this other room that seems to run without any bug so far
http://forum.xda-developers.com/not...t-unmodified-port-sm-n910w8-lollipop-t3072920.
But anyway ur help is apreciated.
Click to expand...
Click to collapse
Ok but if u read the thread a bunch of guys having all types of issues. Only response to your issue is it is the rom. The Dev has to fix it.
BAD ASS NOTE 4
BACARDILIMON said:
Ok but if u read the thread a bunch of guys having all types of issues. Only response to your issue is it is the rom. The Dev has to fix it.
BAD ASS NOTE 4
Click to expand...
Click to collapse
A bunch of guys are having problems because they dont read or follow instructions. Every fix for every minor bug has been gone over in intense detail countless times. I had everything marked and followed the instructions to the letter on vision US rom. Its as flawless as can be. If someone cant figure it out, its a very easy install, they shouldnt be rooting their phone.
Sent from my SM-N910W8 using XDA Free mobile app