Hi All, my Spen has suddenly stopped working it doesn't showing any response when I swipe it on the home screen, After flashing new ICS / JB ROM it works and when i press the lock button and again after unlocking it doesn't works.....Could someone help me to solve this problem.... Thanks in advance.
darthvedor said:
Hi All, my Spen has suddenly stopped working it doesn't showing any response when I swipe it on the home screen, After flashing new ICS / JB ROM it works and when i press the lock button and again after unlocking it doesn't works.....Could someone help me to solve this problem.... Thanks in advance.
Click to expand...
Click to collapse
Try on stock firmware.. see if it helps.
or Try using your friends Spen and see the problem still exit
Kindly pls make your post Clear nxt time.
Rom:
Modem:
kernel:
etc.. So tat it helps us give you solution asap...
first try a clean install of the rom. format system and the install the new rom, but be on a safe kernel first
* have you not tried a. factory reset?
Sent from my GT-N7000 using xda premium
@ALL, Thanks for the reply.
Tried factory Reset, Flashed couple of ICS and JB Roms, Tried Fixing permission, Changing Hand settings, flashing different kernels, etc. ..... finally flashed stock GB ROM, the problem still persists. I think its the problem with the phone, need to visit Samsung Gallery, the warranty is about to expire in 2 weeks time.
PS: The stylus is working fine on other phones, so it's not the stylus. Hard Luck I was on KingDroid V8).
Got Mobo replaced by Samsung, they updated to stock ICS 4.0.4, ran emmc check and found this (see below), what does it means?
eMMC Chip
Type: V3U00M
Date: 08/2012
CID: 1501 blah blah
FwRev: 0x0e
Brick Bug?
No. Sane Chip
Does it mean now it's emmc brick free?
may be.. but will you take chances?
nokiamodeln91 said:
may be.. but will you take chances?
Click to expand...
Click to collapse
Nope, am already on safe kernel but just wanted to confirm what it means? Any definite answer .... anyone?
Related
Hi all,
Just after flashed new kernel, rebooted and the buttons won't work. The light on button always stay enabled and nothing happens when pressing. In logcat nothing happen too when pressing. I have try reflashing stock kernel, stock firmware, custom firmware all ...... and nothing
Anyone have experiencing this problem ?
Maybe a solution
I don't know if it could work but you can try to update from kies with this method https://docs.google.com/document/edit?id=11i3Mlztz3Pqv6KXjRuGtXC7uA7T0Medpt61uK46fC4M&pli=1#
Hope you can resolve
Oops... let's hope you can get it working again
setenza01 said:
Hi all,
Just after flashed new kernel, rebooted and the buttons won't work. The light on button always stay enabled and nothing happens when pressing. In logcat nothing happen too when pressing. I have try reflashing stock kernel, stock firmware, custom firmware all ...... and nothing
Anyone have experiencing this problem ?
Maybe a solution
Click to expand...
Click to collapse
sounds like a hardware problem to me setenza...
i hope i am wrong
i suspect one of them is stuck
setenza01 said:
Hi all,
Just after flashed new kernel, rebooted and the buttons won't work. The light on button always stay enabled and nothing happens when pressing. In logcat nothing happen too when pressing. I have try reflashing stock kernel, stock firmware, custom firmware all ...... and nothing
Anyone have experiencing this problem ?
Maybe a solution
Click to expand...
Click to collapse
I have same problem when use wrong(maybe broken) .PIT file
after flash with correct .PIT file my phone start normal
Odd. Sounds hardware related. Hopefully not though.
Sent from my GT-I9000 using XDA App
Well as you say it's kernel related have you tried repartition when flashing other fw ?
This actually fixed it for me, i think it has to do with some crappy screenshot ****:
http://forum.xda-developers.com/showthread.php?t=850464
with the button remapping it magically fixed it for me!
never had this problem but hope it works out for you!
Make sure you flashed the correct rom version for sgs version. Button problems happen e.g. if flash a captivate kernel on an international version.
Sent from my GT-I9000 using Tapatalk
did u try to flash back new rom.i had same problem n it solved when i flash back new filmware
happened to me once when I by mistake flashed a Captivate fix for Darkyy. In his post there is a link to Captivate unfix, you can try it.
I think that my phone is not working completely after i flashed the 4 ics roms.Probably it was because of the hardware accerleration in the ics rom because after i tested out the roms and flashed back to gb roms,strange problems have appeared(the phone completely does not respond for 2 seconds).Its not the problem with the gb roms as i flashed zeus,cm7,miui,lezo roms and still have this problem.Im wondering if anyone have experienced this problem and if anyone knows how to fix this problem,PLEASE HELP !
zyfkurmom said:
I think that my phone is not working completely after i flashed the 4 ics roms.Probably it was because of the hardware accerleration in the ics rom because after i tested out the roms and flashed back to gb roms,strange problems have appeared(the phone completely does not respond for 2 seconds).Its not the problem with the gb roms as i flashed zeus,cm7,miui,lezo roms and still have this problem.Im wondering if anyone have experienced this problem and if anyone knows how to fix this problem,PLEASE HELP !
Click to expand...
Click to collapse
There's currently no hardware accerleration in the ics roms.
http://forum.xda-developers.com/showthread.php?t=1448803
Do this, and your problems should be solved.
After I flashed miui 2.3/ics (I can't remember) my kernel logo is visible for 15 seconds, so the boot process is much longer.
cakebomb said:
There's currently no hardware accerleration in the ics roms.
http://forum.xda-developers.com/showthread.php?t=1448803
Do this, and your problems should be solved.
After I flashed miui 2.3/ics (I can't remember) my kernel logo is visible for 15 seconds, so the boot process is much longer.
Click to expand...
Click to collapse
wtf.....................i think you don't understand my question.I did not brick my phone , it can boot up as normal , just that the phone does not function properly.It just doesn't respond for 2 seconds and then goes back to normal but it happens all the time so im getting frustrated.Don't know if anyone has a solution to my problem....Thank you for responding anyway
I understand your question.
So, if you do this procedure, you phone will be completly restored. (No more SU, Root, CWM etc.)
Then you can completly screen out/exclude software errors.
And if this not works, it's a hardware problem.
cakebomb said:
I understand your question.
So, if you do this procedure, you phone will be completly restored. (No more SU, Root, CWM etc.)
Then you can completly screen out/exclude software errors.
And if this not works, it's a hardware problem.
Click to expand...
Click to collapse
err..............the first thing that i did after i found out the problem was flashing with smartflash and i did it many times.Think its a hardware problem then.But i did not drop it on the floor or did anything like that , not sure what is the cause of the problem.D:
Have you experienced overheat while on ICS ?
Vinzgore said:
Have you experienced overheat while on ICS ?
Click to expand...
Click to collapse
when i use the phone or play games more than 7-10 minutes , it gets hot.
blue screen error
after flashing to ics ,after 3 to 4 hrs of usage blue screen error and CWM not working the error is, its showing an error occured while attempting to run privileged commands !!!
I have happen to see that blue screen that you mentioned but no strange things going on over here, and I have been flashing to ICS and restoring to GB all weekend just to compare. I know it may sound as a silly question but did you do your wipes before all those roms you mentioned?
Hello Xda members , i have just upgraded my galaxy note from gingerbread to official ICS thru samsung kies , everything went smoothly after upgraded , but my note's screen keeps lighting up and dim for no reason on lock mode , sometimes it continues for several minutes then goes off ,sometimes its like a rotating cycle , it would come back after each 30 minutes...there is no background apps running . i have no such problem using the gingerbread..please help...
westsynd said:
Hello Xda members , i have just upgraded my galaxy note from gingerbread to official ICS thru samsung kies , everything went smoothly after upgraded , but my note's screen keeps lighting up and dim for no reason on lock mode , sometimes it continues for several minutes then goes off ,sometimes its like a rotating cycle , it would come back after each 30 minutes...there is no background apps running . i have no such problem using the gingerbread..please help...
Click to expand...
Click to collapse
I have the same problem, although i didn't upgrade to ICS and still running the original Gingerbread as bought.
I wish someone has a solution for this problem .
Have you tried to factory reset it?
jonpaslim said:
Have you tried to factory reset it?
Click to expand...
Click to collapse
Thank you "jonpaslim" for your prompt reply.
Actually I didn't.
Because I'm worry about getting bricked by factory reset.
And also I'm not sure that I can do it the right way.
.
wisenada said:
Thank you "jonpaslim" for your prompt reply.
Actually I didn't.
Because I'm worry about getting bricked by factory reset.
And also I'm not sure that I can do it the right way.
.
Click to expand...
Click to collapse
If your running in gingerbread it will not brick your phone. Im directing this answer to you when you said that you are still in gingerbread. If your on ics yes it will. Im sorry i have to be spicific next time.
jonpaslim said:
If your running in gingerbread it will not brick your phone. Im directing this answer to you when you said that you are still in gingerbread. If your on ics yes it will. Im sorry i have to be spicific next time.
Click to expand...
Click to collapse
Thank you so much for your kind support and follow up, I will try it and get back with the result.
Till then thanks again
.
Hi guys
I performed a factory reset, and everything is ok now (ok for 24 hours till now).
Although I didn't know what was the reason, But I'm happy that my Note is doing good.
Thank you for support, and special thanks to "jonpaslim".
Regards
.
wisenada said:
Hi guys
I performed a factory reset, and everything is ok now (ok for 24 hours till now).
Although I didn't know what was the reason, But I'm happy that my Note is doing good.
Thank you for support, and special thanks to "jonpaslim".
Regards
.
Click to expand...
Click to collapse
Im glad to help you. Thank you also.
this problem is called kernel wake lock.. you must downgrade to gb, do a full wipe then install a fresh ics via kies or odin, after booting up in ics go into your recovery mode holding volume up + home button + power key and clear your cache 4 time in a row this will solve your issue and maybe increase your battery life if you having any problem on ics related to battery backup
r a Hey guys i hope you can help me.
My phone is a Galaxy S 2 without any branding. I have flashed the ParanoidAndroid Custom Rom 3 weeks ago and all seems to be ok. Last week i had to flash my phone in stock rom to send it to repair.
Now the repair is done and i want to flash the custom rom.
And there's the problem.
I rooted my phone, flashed the CWM-Recovery and the custom rom.The Rom starts and i can login in my phone. Every time the phone gets in standby by timeout i couldnt wake up the phone and can do nothing than a hard reboot.but than the phone stays at bootscreen and do nothing. After 30 sec. a screen with kernel panic appears. If this happens i can only flqsh the stock rom in download modus.
I have tried several roms.
I hope you can help me please.
Der_Lomi said:
r a Hey guys i hope you can help me.
My phone is a Galaxy S 2 without any branding. I have flashed the ParanoidAndroid Custom Rom 3 weeks ago and all seems to be ok. Last week i had to flash my phone in stock rom to send it to repair.
Now the repair is done and i want to flash the custom rom.
And there's the problem.
I rooted my phone, flashed the CWM-Recovery and the custom rom.The Rom starts and i can login in my phone. Every time the phone gets in standby by timeout i couldnt wake up the phone and can do nothing than a hard reboot.but than the phone stays at bootscreen and do nothing. After 30 sec. a screen with kernel panic appears. If this happens i can only flqsh the stock rom in download modus.
I have tried several roms.
I hope you can help me please.
Click to expand...
Click to collapse
In recovery - > Wipe data, wipe cache and dalvik cache. This may solve the bootloop. If the problem persists, re-insert a battery and flash the rom again (i think you'll able to go into a download mode).
flash
Every time i flash a new rom i make a full wipe. So that's not the problem. I also tried several kernel.
Maybe this helps http://forum.xda-developers.com/showthread.php?t=1619571
re
Thanks for that but all the things in the guide i have made....
Der_Lomi said:
Thanks for that but all the things in the guide i have made....
Click to expand...
Click to collapse
which rom do you flashed ?
rom
I tried several roms. ParanoidAndroid, BlueRom, resurrection rom... the problem stays at all roms...only the stock rom runs
Did you perhaps after the repair instead of your cell phone get a new version to another? Perhaps an i9100 or i9100g?
Sorry but my english is not very good....
Its the same phone
Der_Lomi said:
Its the same phone
Click to expand...
Click to collapse
Is your phone i9100 or i9100g? According you mention before, I think Resurrection rom is for i9100.
It's a GT-I9100 so the rom is for
I tried different solution but nothing works. Tried several roms, release and re-insert the battery, always make a full wipe before flashing, reflashing the rom.
The thing is:
I can flash a custom rom without problems...the new flashed rom starts without problems...BUT if the phone gets into standby and stays there for 1 min i can't wake up the phone...i can only hard reboot the phone..release the battery and re-insert it. Then the phone boits and stays at boot. I can only enter the download modus.
This is the forum for G-user!!!!!! This is the wrong forum for you, sorry....
Here´s also a GT-i9100 forum or not? if i´m wrong please send me a link where someone could help me please.
Here.....
http://forum.xda-developers.com/forumdisplay.php?f=1058
http://forum.xda-developers.com/forumdisplay.php?f=1204
please press thanx if this helps you.......
Der_Lomi said:
Here´s also a GT-i9100 forum or not? if i´m wrong please send me a link where someone could help me please.
Click to expand...
Click to collapse
i9100 n i9100g has nothing different then processor and main board but rest all is same installation flashing method etc etc so even if non G user post problem the solution to that might be same as solution to same problem on our G variant so non G users can be helped on G forum p Sub forum )
---------- Post added at 07:47 PM ---------- Previous post was at 07:44 PM ----------
Der_Lomi said:
It's a GT-I9100 so the rom is for
Click to expand...
Click to collapse
can you tell how you flash new roms
because on cyano Roms you have to flash first
then DO A DATA WIPE / FACTORY RESET
I flashed the latest Russian Jelly Bean ROM today with Odin and everything works... Except GSM. The phone part works for two seconds and then dies, then again two seconds and dead. I can select a network and it can register on the network but most of the time it looks like it's just in flight mode.
Should I try to downgrade or is there some fix I should try before? I tried searching but didn't find much.
Одг: [Q] Russian JB with dead GSM
rospaya said:
I flashed the latest Russian Jelly Bean ROM today with Odin and everything works... Except GSM. The phone part works for two seconds and then dies, then again two seconds and dead. I can select a network and it can register on the network but most of the time it looks like it's just in flight mode.
Should I try to downgrade or is there some fix I should try before? I tried searching but didn't find much.
Click to expand...
Click to collapse
Did factory reset? Lot users had that problem if they didn't do that.
Sent from Galaxy S Advance
I didn't. What's the procedure now? Factory reset and then flash it again?
Hvala
Ok I made a factory reset and now it works. But the implementation is hideous, wifi and battery are worse and everything is a bit laggy. AOSP would be a blessing at this point. Thanks.
Одг: [Q] Russian JB with dead GSM
rospaya said:
I didn't. What's the procedure now? Factory reset and then flash it again?
Hvala
Click to expand...
Click to collapse
No, now do factory reset. Go to recovery, you will find it there. Turn phone on with VolumeUp+Home+Power.
Sent from Galaxy S Advance
Yes... after Factory Reset... Root it and use Root apps and Custom Kernels to make your phone fly.....
At first I was disappointed with JB... but now after a lot of miscellaneous tweaks, my phone runs much better than GB!!
Sent from my GT-I9070
shut_down said:
Did factory reset? Lot users had that problem if they didn't do that.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
Holy "factory reset"!