[Q] Go back to ICS from Leaked LS7 JB - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hi XDA,
I would like to ask on how to go back to my stock ICS from leaked Jelly Bean (LS7).
Because I am planning to flash the leaked JB or maybe a custom JB like Rocket Rom but having a precaution that if I am not satisfied, I could go back to my stock ICS.
Please help me XDA.
Thank you very much in advance.

you can always go back to any stock rom using PC odin.
download the stock rom and place it in the pda tab of odin. put phone in download mode and flash

nokiamodeln91 said:
you can always go back to any stock rom using PC odin.
download the stock rom and place it in the pda tab of odin. put phone in download mode and flash
Click to expand...
Click to collapse
Thanks! But one more thing. Is there any other way aside from PC Odin? Can I use Mobile Odin instead? Thank you very much!

Yeah you can use mobile odin if you prefer it, However when ever I flash something I always use PC odin, Just because ive used it for so many years and im comfortable with it.
But either one will work well :good:

As azzledazzle said,
you can use mobile odin as well,
when you click on open file and select the rom (tar.md5), it will fill up all the partitions, then in the kernel section you can manually select the philz kernel so when the rom is installed you can be on a safe kernel

azzledazzle said:
Yeah you can use mobile odin if you prefer it, However when ever I flash something I always use PC odin, Just because ive used it for so many years and im comfortable with it.
But either one will work well :good:
Click to expand...
Click to collapse
Thanks azzledazzle!

nokiamodeln91 said:
As azzledazzle said,
you can use mobile odin as well,
when you click on open file and select the rom (tar.md5), it will fill up all the partitions, then in the kernel section you can manually select the philz kernel so when the rom is installed you can be on a safe kernel
Click to expand...
Click to collapse
Does this mean that philz kernel is also applicable in ICS roms regardless of being stock or custom? Thanks a lot!

there are kernels for most of the builds.. but only works with TW or TW based ICS roms and JB roms...

azzledazzle said:
Yeah you can use mobile odin if you prefer it, However when ever I flash something I always use PC odin, Just because ive used it for so many years and im comfortable with it.
But either one will work well :good:
Click to expand...
Click to collapse
By the way, I would like also to ask what is the meaning when the instruction in installing the ROM says "Format System"? How to do this and what will happen? Will it also erase the contents of my external sd or just the internal? Thank you very much again.

format / system is done in the Clockworkmod recovery under mounts and storage. this will erase the system partition for the new rom to install peacefully. This does not touch the ext or internal storage

nokiamodeln91 said:
there are kernels for most of the builds.. but only works with TW or TW based ICS roms and JB roms...
Click to expand...
Click to collapse
Also, same question to azzledazzle, I would like also to ask what is the meaning when the instruction in installing the ROM says "Format System"? How to do this and what will happen? Will it also erase the contents of my external sd or just the internal? Or both? Thank you very much again.

nokiamodeln91 said:
format / system is done in the Clockworkmod recovery under mounts and storage. this will erase the system partition for the new rom to install peacefully. This does not touch the ext or internal storage
Click to expand...
Click to collapse
Wow! I was just going to ask that question to you, Should I always going to do this format system thing every time I will going to flash a ROM? Or just when instructed by the developer? Thank you very much again. That was really helpful.

its always a good idea to
format/system
format/data
format/cache
before installing the new rom.. this will give you least trouble with new rom

Just do full nandroid backup of your ics 4.0.3 and then flash leaked jb rom. If you don't like jb, you can any time return to your ics rom from cwm recovery in recovery mode.
Sent from my GT-I9100 using xda app-developers app

nokiamodeln91 said:
its always a good idea to
format/system
format/data
format/cache
before installing the new rom.. this will give you least trouble with new rom
Click to expand...
Click to collapse
singhsidhartha said:
Just do full nandroid backup of your ics 4.0.3 and then flash leaked jb rom. If you don't like jb, you can any time return to your ics rom from cwm recovery in recovery mode.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Thank you very much! I've already installed Rocket Rom based from leaked JB. Hoping for no major problems to encounter.
Thanks XDA. You really helped a lot!

even if you do encounter some issus, this may help you
http://forum.xda-developers.com/showthread.php?t=1961652

nokiamodeln91 said:
even if you do encounter some issus, this may help you
http://forum.xda-developers.com/showthread.php?t=1961652
Click to expand...
Click to collapse
Thank you very much! This will really help me know more about android and check the latest versions. thanks again!

Related

[Q] Criskelo ICS ROM v2 install

hi there,
first off, im sorry for being a total noob.
i was trying to look for a full guide to install Criskelo ICS ROM v2.
i found an online guide from the site rootgalaxynote dot com
but its for the older version.
i was wondering if i can do this step but install using the V2 or follow the steps, install the older version then use clockworksmod to load v2?
once again, please accept my apologies as i have never touched an android in my life.. im so new, my note is still in the mail and i havent even received it yet.
Go the the development section find criskelo v2 and follow the instructions in the first post? Why go to another site when the instructions are right here
.....
Sent from my GT-N7000 using Tapatalk 2
hi there,
i was there, the thing is that i want to make sure i understand the instructions the instructions
From GB:
Install ics repack by chainfire via mobile odin-reboot-reboot into revovery-full wipe-install criskelo ics.
Click to expand...
Click to collapse
so before i run the steps above, i should install clockworkmods and titanium backup to backup my current rom and apps rite?
then i download the ics repack by chainfire and the criskelo v2 mod
then install mobile odin and install the mod?
Very simple as ABC.
First you use PC odin and flash a single file called chain fire repack.tar
This ROM is already rooted.
Boot up and install triangleaway1.25.apk
Copy your ROM to SDcard
Reboot to recovery using the CWM app in Your note
Wipe data.factory reset wipe the other one below the list. I forgotten the name
Wipe devalik cache from advance settings
Install the zip file called Criskelo or any other ROM from Sdcard.
Once you are done reboot and enjoy your new rom.
Sent from my GT-N7000 using XDA
gtee said:
Very simple as ABC.
First you use PC odin and flash a single file called chain fire repack.tar
This ROM is already rooted.
Boot up and install triangleaway1.25.apk
Copy your ROM to SDcard
Reboot to recovery using the CWM app in Your note
Wipe data.factory reset wipe the other one below the list. I forgotten the name
Wipe develik cache from advance settings
Install the zip file called Criskelo ROM from Sdcard.
Once you are done reboot and enjoy your new rom.
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
GREAT!! thats the best information i've got so far... thank you kindly....
i really appreciate it...
one more question, by following the instructions above, will the phone be overclockable? (just wondering.. doesnt matter if it doesnt..)
vyraz said:
GREAT!! thats the best information i've got so far... thank you kindly....
i really appreciate it...
one more question, by following the instructions above, will the phone be overclockable? (just wondering.. doesnt matter if it doesnt..)
Click to expand...
Click to collapse
No, you can't overclock any of the ICS kernels for the time being.
chasmodo said:
No, you can't overclock any of the ICS kernels for the time being.
Click to expand...
Click to collapse
i see.. ok.. no prob.. dont really need that much juice anyway.. for now that is...
do you guys recomend i root my GB in stock condition then backup with CWM first? just so i can revert much later on in case bad stuff happens?
always make a backup incase of anything going wrong
gtee said:
Very simple as ABC.
First you use PC odin and flash a single file called chain fire repack.tar
This ROM is already rooted.
Boot up and install triangleaway1.25.apk
Copy your ROM to SDcard
Reboot to recovery using the CWM app in Your note
Wipe data.factory reset wipe the other one below the list. I forgotten the name
Wipe develik cache from advance settings
Install the zip file called Criskelo ROM from Sdcard.
Once you are done reboot and enjoy your new rom.
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
This does however increase the binary counter thus voiding warranty. By taking some extra steps you'll be able to upgrade to any ICS rom without increasing the binary counter.
What I did was I flashed one of the pre-rooted roms found in a thread in the dev section. After that I flashed the CF Root kernel for the rom I installed (I used the pre-rooted LA6 rom so I used the CF kernel for LA6).
Now you have full root and CWMR so you can flash any rom you like. For ICS roms, install Mobile Odin, flash the ICS LP1 repack, reboot to recovery, do a full wipe and install any ICS rom you want to try.
Pre-rooted stock roms: http://forum.xda-developers.com/showthread.php?t=1535025
For CF-Kernel check step two "2. I Want ROOT + CWM" of this thread and download the appropriate files for the pre-rooted kernel you flashed: http://forum.xda-developers.com/showthread.php?t=1329360
This is what triangle away is for.
Resetting the counter to none!
Sent from my GT-N7000 using XDA
gtee said:
This is what triangle away is for.
Resetting the counter to none!
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
thats what i was thinking...
gtee said:
This is what triangle away is for.
Resetting the counter to none!
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
To my knowledge Triangle Away only does exactly what is says, it will remove the yellow triangle after you've flashed a custom kernel through pc Odin and thus having triggered the binary counter. To my knowledge Triangle Away is not able to reset the counter though I could be wrong as I've never used it myself. There is however a thread explaining how to remove both the triangle and reset the counter using a usb JIG: http://forum.xda-developers.com/showthread.php?t=1354888
Counter is reset
using triangle away does reset the counter as well as removing the triangle also says your rom is samsung original even if it is not!.
you must use the correct ics version to do this one that does work is I9220LP1-N7000-ICS-REPACK worked just fine on my note. It does not work on all current versions of ICS. enjoy
Thanks a lot for the info! I really didn't know and I thought I read somewhere that it didn't reset the counter.
does the triangle away work for GB phones? just wondering
No
Sent from my GT-N7000 using XDA
Other way you could try
Hi, maybe you already flashed, but this is how I did it. No problems at all.
Starting from stock GB. (Or you can flash stock through ODIN)
Used CF-Root to get Root and CWR on the phone.
Downloaded and flashed Abyss Kernel 4.2
rebooted recovery
flashed ICS ROM from sdcard.
Worked perfectly well for me.
Hope this helps.
rupalazzi said:
Hi, maybe you already flashed, but this is how I did it. No problems at all.
Starting from stock GB. (Or you can flash stock through ODIN)
Used CF-Root to get Root and CWR on the phone.
Downloaded and flashed Abyss Kernel 4.2
rebooted recovery
flashed ICS ROM from sdcard.
Worked perfectly well for me.
Hope this helps.
Click to expand...
Click to collapse
i see... so ics will work on the abyss 4.2 rom? cool...
sadly... i havent been able to do anything on my phone... it hasnt arrived yet.. and yesterday i got a call from the provider saying its gonna EVEN more delayed
vyraz said:
i see... so ics will work on the abyss 4.2 rom? cool...
sadly... i havent been able to do anything on my phone... it hasnt arrived yet.. and yesterday i got a call from the provider saying its gonna EVEN more delayed
Click to expand...
Click to collapse
As soon as you flash the rom, abyss kernel will be overwitten (you get CWM).
Now a piece of advice, there are great risk on flashing any rom based on leak repack, there is an issue with the kernel and the eMMC, which basically can fry your phone (if you are unlucky).
I personally decided to flash back to stock GB.... just in case. I'm not willing to gamble with my note, but that is me.
Sent from my GT-N7000 using XDA
rupalazzi said:
As soon as you flash the rom, abyss kernel will be overwitten (you get CWM).
Now a piece of advice, there are great risk on flashing any rom based on leak repack, there is an issue with the kernel and the eMMC, which basically can fry your phone (if you are unlucky).
I personally decided to flash back to stock GB.... just in case. I'm not willing to gamble with my note, but that is me.
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
thanks for the input... was kinda thinking that while doing alot of reading... im still considering a GB rom or an ICS rom

[Q] From an old ICS Stunner ROM, to a new CM9/10 ROM

It's been a long time since I was last seen here, I've been busy working and studying, but now that it's vacation I'd very much like to update my ROM.
Currently I'm on Kernel version: 3.0.15-I9220ZCLP5-CL295568
And my ROM is ICS Stunner Beta 5.0 (yes, a pretty old one)
CWM: v5.0.2.7
So, the question is.. How do I get from that ROM, to a new, updated one?
I've been looking around but there are no specific guides on how to do this.. And I rooted mine back when I was on 2.3.4.
Honestly, I have no idea what I should get back to before putting a new ROM over it.
It'd be great if any of you could help me out describing how it's done! I would really appreciate the effort.
Thank you in advance, and hopefully I'll be able to get the best out of my Note again after this!
Use PC Odin to flash a stock gingerbread ROM, then root and install clockworkmod recovery, download and place whatever ROM you'd like to flash on your external sd card or internal memory, lastly boot into recovery (hold volume up + home + power buttons) and factory rest, wipe cache partition and dalvik cache then flash the ROM and reboot.
Sent From An Awesome Jelly Bean Galaxy Note
Can I go directly from a GB ROM to a ICS/JB ROM? Or do I need to flash some ICS update first?
Thank you for the explanation thus far!
Lanarix said:
Can I go directly from a GB ROM to a ICS/JB ROM? Or do I need to flash some ICS update first?
Thank you for the explanation thus far!
Click to expand...
Click to collapse
You can go directly from a rooted GB ROM to a ICS ROM. I wont recommend JB rom as of now as its a preview and not a daily driver.
No flashing of ICS repacks. Forget them. They are now history
Alright thank you.
By the way, I'm on the LP5 Kernel from Stunner ROM, which had alot of bricks when you flashed stuff.
Is this still an issue? If so.. How do I work around it? Because I don't want to brick it obviously.
Bump .
Nobody has an answer for me? Please?
Lanarix said:
Alright thank you.
By the way, I'm on the LP5 Kernel from Stunner ROM, which had alot of bricks when you flashed stuff.
Is this still an issue? If so.. How do I work around it? Because I don't want to brick it obviously.
Click to expand...
Click to collapse
I just explained to you the "100% safe way" to go from a stock ics rom to a custom rom in my last post. Stock gingerbread first through pc odin, root, install clockworkmod recovery, flash custom ics/jb rom of choice.
Lanarix said:
Nobody has an answer for me? Please?
Click to expand...
Click to collapse
Follow these instructions.
If you have CWM installed and your device have full root.
Reboot into CWM Recovery
Install a safe kernel (hardcore, notecore, cf root, franco etc) or flash abyss 4.2 redpill recovery.
Reboot recovery
Now full wipe for a clean install.(cache/dalvik /data)
Flash rom
Reboot system
Done.
Sent from my GT-N7000 using Xparent ICS Tapatalk 2
So I wouldn't even need to go back to GB if I follow your instructions sahilarora2003?
And you install a kernel just by flashing a .zip file right?
+1 I would hold off on the Jelly.....nothing exciting now. Give it a little more time....like another 3-5 updates I flashed CM10 and lasted 10mins before I came back to ICS. :good:
abhisahara said:
You can go directly from a rooted GB ROM to a ICS ROM. I wont recommend JB rom as of now as its a preview and not a daily driver.
No flashing of ICS repacks. Forget them. They are now history
Click to expand...
Click to collapse
Lanarix said:
So I wouldn't even need to go back to GB if I follow your instructions sahilarora2003?
And you install a kernel just by flashing a .zip file right?
Click to expand...
Click to collapse
Yes.
Sent from my GT-N7000 using Xparent ICS Tapatalk 2

[Q] need urgent help! bricked it

hey eveyone!
my device is galaxy s advance gt-i9070 on which i was using cutom rom aicp 3.5 nightly (4.4.2 kitkat) with minor bugs and cwm recovery 6.0.4.7
i decided to switch to paranoid android 3.69 for smoother perfomance but sadly i bricked my device. although i had backed up my rom using cwm recovery on sd card. but the most sad part is that even recovery is not working. it just reboots again and again. someone told me to flash stock firmware via odin as the download mode is working. but i am worried that my data will be lost. can anyone tell me my data will be lost or not????
and if it ll lost than any way to save it or recover it/ ? i had extremely precious data in it. but being careless i didnt backed my personal data in my laptop.. please help me guys.. ready to pay any cost for my data
shivamgaba22 said:
hey eveyone!
my device is galaxy s advance gt-i9070 on which i was using cutom rom aicp 3.5 nightly (4.4.2 kitkat) with minor bugs and cwm recovery 6.0.4.7
i decided to switch to paranoid android 3.69 for smoother perfomance but sadly i bricked my device. although i had backed up my rom using cwm recovery on sd card. but the most sad part is that even recovery is not working. it just reboots again and again. someone told me to flash stock firmware via odin as the download mode is working. but i am worried that my data will be lost. can anyone tell me my data will be lost or not????
and if it ll lost than any way to save it or recover it/ ? i had extremely precious data in it. but being careless i didnt backed my personal data in my laptop.. please help me guys.. ready to pay any cost for my data
Click to expand...
Click to collapse
Flashing stock firmware with Odin will not delete your data from SD card. You will probably need to do factory reset, it will delete your contacts, sms, apps... But stuff from internal and external sd will remain there.
You bricked it because 4.4.2 uses preload partition for a swap, and it is partitioned in different way. And on PA 3.69 is probably different.
Or ROM zip of PA was corrupted.
thankyou and one more question
shut_down said:
Flashing stock firmware with Odin will not delete your data from SD card. You will probably need to do factory reset, it will delete your contacts, sms, apps... But stuff from internal and external sd will remain there.
You bricked it because 4.4.2 uses preload partition for a swap, and it is partitioned in different way. And on PA 3.69 is probably different.
Or ROM zip of PA was corrupted.
Click to expand...
Click to collapse
thanx a lot buddy now i can flash it being tension free. but can you tell me the way to flash PA without bricking /????
shivamgaba22 said:
thanx a lot buddy now i can flash it being tension free. but can you tell me the way to flash PA without bricking /????
Click to expand...
Click to collapse
I did not use that version that you used. I think that you will not have a problem when you install it over stock, I explained you why you had problem when you did it over CM11.
Sent from my GT-I9070 using Tapatalk
Thanx a lot
Everything fine now with all data restored..
Once again thnx buddy
Sent from my GT-I9070 using XDA Premium 4 mobile app
Hi
I 've bricked my phone as i was trying to clear cache 'n partition of my rooted phone. I assume it must have cleared the software as well.
i'm trying to flash it via odin but it is showin FAIL. i'm putting a pda .md5 file from sammobile 'n it's still not working. pl help.
Neo2803 said:
Hi
I 've bricked my phone as i was trying to clear cache 'n partition of my rooted phone. I assume it must have cleared the software as well.
i'm trying to flash it via odin but it is showin FAIL. i'm putting a pda .md5 file from sammobile 'n it's still not working. pl help.
Click to expand...
Click to collapse
You can't brick phone with clearing cache. Did you wipe system partition? Try to install same ROM that you had (if you had).
Give us a screenshot of Odin fail. What exactly happen. And what is the full name of md5 that you put in pda of Odin. Try different version of Odin too.
shut_down said:
You can't brick phone with clearing cache. Did you wipe system partition? Try to install same ROM that you had (if you had).
Give us a screenshot of Odin fail. What exactly happen. And what is the full name of md5 that you put in pda of Odin. Try different version of Odin too.
Click to expand...
Click to collapse
Yes, i did wipe system partition. Should i have not done that ???????/
Name of md5 - I9070DDULP8_I9070ODDULP8_HOME.tar.md5 .. Can you suggest another one ?
I did have a ROM named light JB which i found here only. Its location showthread.php?t=2244441.
pl guide future course of action.
TIA.
Neo2803 said:
Yes, i did wipe system partition. Should i have not done that ???????/
Name of md5 - I9070DDULP8_I9070ODDULP8_HOME.tar.md5 .. Can you suggest another one ?
I did have a ROM named light JB which i found here only. Its location showthread.php?t=2244441.
pl guide future course of action.
TIA.
Click to expand...
Click to collapse
Go back to recovery, and if you have ROMs zip install it again.
Ofcourse you shouldn't wipe system partition, system files are there...
And if you can't install ROM again, what error do you get in Odin?
shut_down said:
Go back to recovery, and if you have ROMs zip install it again.
Ofcourse you shouldn't wipe system partition, system files are there...
And if you can't install ROM again, what error do you get in Odin?
Click to expand...
Click to collapse
I didn't think twice before wiping it. My bad.
Anyways, That's the issue. I can't go to recovery. Phone only shows the odin mode (if i press VOL. DOWN+HOME+POWER).
Odin simply says FAILS.
Neo2803 said:
I didn't think twice before wiping it. My bad.
Anyways, That's the issue. I can't go to recovery. Phone only shows the odin mode (if i press VOL. DOWN+HOME+POWER).
Odin simply says FAILS.
Click to expand...
Click to collapse
Well then you did not just wipe system, you installed some GB based ROM over?
You have log window in Odin, where it fails? Try to redownlaod firmware again, and then install again.
What version of Odin do you use? Try 3.x.
shut_down said:
Well then you did not just wipe system, you installed some GB based ROM over?
You have log window in Odin, where it fails? Try to redownlaod firmware again, and then install again.
What version of Odin do you use? Try 3.x.
Click to expand...
Click to collapse
Odin Version - 3.07
I'm not sure it s GB based ROM and neither if it's JB. Can you take some more pain 'n send me a proper link ? please.
My older custom ROM is http://forum.xda-developers.com/showthread.php?t=2244441 - http://d-h.st/vge
Neo2803 said:
Odin Version - 3.07
I'm not sure it s GB based ROM and neither if it's JB. Can you take some more pain 'n send me a proper link ? please.
Click to expand...
Click to collapse
But it should be the same:
http://terafile.co/222154239129/INU-I9070DDULP8-20130412134604.zip
http://rapidgator.net/file/0a25225062db04ba2c8216cca12972d2
Check the file zize of zip when you download it, it should be 425MB.
shut_down said:
But it should be the same:
http://terafile.co/222154239129/INU-I9070DDULP8-20130412134604.zip
http://rapidgator.net/file/0a25225062db04ba2c8216cca12972d2
Check the file zize of zip when you download it, it should be 425MB.
Click to expand...
Click to collapse
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Neo2803 said:
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Click to expand...
Click to collapse
ROM is fine. And you was on GB or JB before? If you was on GB then this problem you got is normal. You must be on JB (flash JB firmware) if you install JB ROM.
And again, if you get FAIL on Odin DO A SCREENSHOT AND POST IT HERE. To see what cause that fail. Left part of this screenshot is a log http://4.bp.blogspot.com/-gkWcapOu2...gingerbread+s5570jpq8+samsung+galaxy+Mini.jpg
Blue, where it says Message.
This is for other phone, do not pay attention on that, I just told you what I need to see.
---------- Post added at 11:28 AM ---------- Previous post was at 11:02 AM ----------
Neo2803 said:
Lemme download this firmware. but what about the custom ROM I installed last time. Shouldn't THAT be the one i install NOW ???
pasting the link here for your review -
http://forum.xda-developers.com/showthread.php?t=2244441
http://d-h.st/vge
Click to expand...
Click to collapse
And no, you must install Firmware not, not ROM. Because you probably installed JB ROM over GB. That is why you do not have working recovery.
Finally unbricked !!!
shut_down said:
ROM is fine. And you was on GB or JB before? If you was on GB then this problem you got is normal. You must be on JB (flash JB firmware) if you install JB ROM.
[/COLOR]
And no, you must install Firmware not, not ROM. Because you probably installed JB ROM over GB. That is why you do not have working recovery.
Click to expand...
Click to collapse
Finallyyyyyyy !!! yipppieee !!! I'm able to flash my phone with a JB Firmware. I shall be more careful in future.
http://i.imgur.com/UMv2kgs.png
http://i.imgur.com/WPP6yqs.png?1
Thanks a tonnnnn shut_down :good:: God bless you.

SOLVED [Q] Please Help! Soft Bricked Gt-N7000 stuck in boot loop

Hello, i recently tried to flash the C-Rom on my gt n7000, but i keep getting the tmp/sideload/package.zip (status 7) error, now my phone is stuck in bootloop. i read that i need to flash a stock rom but my charging port has been damaged as such i cant connect the phone to my computer to use Odin. Is there a stock rom that can be flashed through recovery?
annie22 said:
Hello, i recently tried to flash the C-Rom on my gt n7000, but i keep getting the tmp/sideload/package.zip (status 7) error, now my phone is stuck in bootloop. i read that i need to flash a stock rom but my charging port has been damaged as such i cant connect the phone to my computer to use Odin. Is there a stock rom that can be flashed through recovery?
Click to expand...
Click to collapse
You came so far, its to late to turn back...
If only you had read the instructions...
Then you would know...
That you need a more recent version of your recovery...
Which is part of a kernel...
So flash raw kernel...
And then flash C-Rom...
annie22 said:
Hello, i recently tried to flash the C-Rom on my gt n7000, but i keep getting the tmp/sideload/package.zip (status 7) error, now my phone is stuck in bootloop. i read that i need to flash a stock rom but my charging port has been damaged as such i cant connect the phone to my computer to use Odin. Is there a stock rom that can be flashed through recovery?
Click to expand...
Click to collapse
To Flash ANY/ALL KK Based Roms (4.4+) you need base recovery 0f 6.0.4.4+. Can you still reboot to recovery? What rom vers are you previously on? Rooted? What recovery? If your charging port has been damaged, how are you gonna charge your phone? Get it repaired ASAP before doing anything else. Loss of battery during Rom flashing can make your phone a nice desk decoration.
Jackwu696 said:
To Flash ANY/ALL KK Based Roms (4.4+) you need base recovery 0f 6.0.4.4+. Can you still reboot to recovery? What rom vers are you previously on? Rooted? What recovery? If your charging port has been damaged, how are you gonna charge your phone? Get it repaired ASAP before doing anything else. Loss of battery during Rom flashing can make your phone a nice desk decoration.
Click to expand...
Click to collapse
Yes i can boot to recovery, thats all my phone does is load with the Samsung boot logo then the recovery screen. Im on the offical samsung stock rom. Yes its rooted.CWM, I use a universal battery charger, the battery was full before i tried flasing the C-Rom.
annie22 said:
Yes i can boot to recovery, thats all my phone does is load with the Samsung boot logo then the recovery screen. Im on the offical samsung stock rom. Yes its rooted.CWM, I use a universal battery charger, the battery was full before i tried flasing the C-Rom.
Click to expand...
Click to collapse
Do you still remember your Stock Rom's Build number? If yes, then you can try downloading philz safe kernel with recovery that is compatible with your build number, flash it in cwm recovery, then reboot to RECOVERY, from there do a factory reset wipe, all formats (system, data, cache, preload) wipe dalvik cache (If you don't understand any of the terms I mentioned above, please go to philz page and read) and Flash a TW BASED custom rom first (you can find and download any rom as long as it's TW based). See if that boots.
Ultimately you WILL need that charging/USB Port fixed so please make that a TOP Priority
Azeazezar said:
You came so far, its to late to turn back...
If only you had read the instructions...
Then you would know...
That you need a more recent version of your recovery...
Which is part of a kernel...
So flash raw kernel...
And then flash C-Rom...
Click to expand...
Click to collapse
I read the entire C-ROM tutorial, before doing anything.
Jackwu696 said:
Do you still remember your Stock Rom's Build number? If yes, then you can try downloading philz safe kernel with recovery that is compatible with your build number, flash it in cwm recovery, then reboot to RECOVERY, from there do a factory reset wipe, all formats (system, data, cache, preload) wipe dalvik cache (If you don't understand any of the terms I mentioned above, please go to philz page and read) and Flash a TW BASED custom rom first (you can find and download any rom as long as it's TW based). See if that boots.
Ultimately you WILL need that charging/USB Port fixed so please make that a TOP Priority
Click to expand...
Click to collapse
No i dont remember it...
annie22 said:
No i dont remember it...
Click to expand...
Click to collapse
Then I suggest you fix that port so you can use odin, otherwise follow @Azeazezar advice
annie22 said:
I read the entire C-ROM tutorial, before doing anything.
Click to expand...
Click to collapse
Follow these instructions.
Azeazezar said:
Follow these instructions.
Click to expand...
Click to collapse
Ohh, , okay will do.
@annie22 you could also download any JB kernel (if you were on JB) of philz and flash it in recovery, reboot recovery, then flash Raw kernel r4 or r5 and reboot recovery and from there flash C-Rom or any other KK rom. You can use any philz kernel irrespective of the build number as long as you are using it only to flash another kernel and then rom of your choice. Make sure to download the .zip version of the philz kernel and put that and raw kernel and rom on external sd card. Keep back up of these kernels and roms on pc as well so that you can connect memory card to pc and transfer those files back to card, as it so happened that i while doing full wipe on philz kernel it also wiped my external card.
treacherous_hawk said:
@annie22 you could also download any JB kernel (if you were on JB) of philz and flash it in recovery, reboot recovery, then flash Raw kernel r4 or r5 and reboot recovery and from there flash C-Rom or any other KK rom. You can use any philz kernel irrespective of the build number as long as you are using it only to flash another kernel and then rom of your choice. Make sure to download the .zip version of the philz kernel and put that and raw kernel and rom on external sd card. Keep back up of these kernels and roms on pc as well so that you can connect memory card to pc and transfer those files back to card, as it so happened that i while doing full wipe on philz kernel it also wiped my external card.
Click to expand...
Click to collapse
Hi, thanks. Excuse my slowness but Umm could you direct me to the link please, I've been searching and feel I'm going around in circles, I see the thread for philz but no download link..
annie22 said:
Hi, thanks. Excuse my slowness but Umm could you direct me to the link please, I've been searching and feel I'm going around in circles, I see the thread for philz but no download link..
Click to expand...
Click to collapse
You should be able to flash raw kernel from just about any custom recovery. Just skip philz
Azeazezar said:
You should be able to flash raw kernel from just about any custom recovery. Just skip philz
Click to expand...
Click to collapse
Problem is, both r4 n r5 download links are dead... do u know any mirror? I'd like to keep a copy of r5 too just in case I need TWRP.
Sent from my GT-N7000 using XDA Free mobile app
Jackwu696 said:
Problem is, both r4 n r5 download links are dead... do u know any mirror? I'd like to keep a copy of r5 too just in case I need TWRP.
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
The links work fine here.
If you have trouble I could send you a copy.
Azeazezar said:
The links work fine here.
If you have trouble I could send you a copy.
Click to expand...
Click to collapse
Yes I'd really like that mate. Gonna DL it 1st thing tomorrow. Just the raw5 will do. Thanks again for your trouble
Sent from my GT-N7000 using XDA Free mobile app
annie22 said:
Hi, thanks. Excuse my slowness but Umm could you direct me to the link please, I've been searching and feel I'm going around in circles, I see the thread for philz but no download link..
Click to expand...
Click to collapse
Can't search, Can't help.
annie22 said:
Hi, thanks. Excuse my slowness but Umm could you direct me to the link please, I've been searching and feel I'm going around in circles, I see the thread for philz but no download link..
Click to expand...
Click to collapse
if you r on cwm based or any custom recovery
goto android development page download forest cm11 kernel and flash it have latest philz recovery
if you are on stock
then
got original android development page >philz*******>download odin flashable md5> flash>install forestcm11 kernel> install c rom or any other
i dont know why u people search for single when you have an alternate
thanks to @forest1971
Flash success!!!! Bricked no more.
Just wanted to say thank you to everyone for all the advice, I was finally able to flash the philz jb kernel and then install the latest version, then iinstall C rom. YAAAAAY!!!!!! Phone is now fully functional
annie22 said:
Just wanted to say thank you to everyone for all the advice, I was finally able to flash the philz jb kernel and then install the latest version, then iinstall C rom. YAAAAAY!!!!!! Phone is now fully functional
Click to expand...
Click to collapse
Glad to hear that, Remember to change your thread by adding [SOLVED] to let others know and also as reference to others facing the same problem.
---------- Post added at 07:14 AM ---------- Previous post was at 07:14 AM ----------
annie22 said:
Just wanted to say thank you to everyone for all the advice, I was finally able to flash the philz jb kernel and then install the latest version, then iinstall C rom. YAAAAAY!!!!!! Phone is now fully functional
Click to expand...
Click to collapse
Glad to hear that, Remember to change your thread title by adding [SOLVED] to let others know and also as reference to others facing the same problem.

Format and Fresh Install GTi9070

Hi Guys,
I want to re-format and fresh install the official fimrware from samsung, please teach me how. Thanks
btw, the reason i want to re-format or fresh install is because my wifi and mobile data is turning it on automatically, any ideas about this? Thanks
Regards,
Wingleaf
wingleaf said:
Hi Guys,
I want to re-format and fresh install the official fimrware from samsung, please teach me how. Thanks
btw, the reason i want to re-format or fresh install is because my wifi and mobile data is turning it on automatically, any ideas about this? Thanks
Regards,
Wingleaf
Click to expand...
Click to collapse
Hi!
Maybe this will help: How to use Odin for GT-I9070
Hi boys&girls
I have in my hand a "old" GT-I9070 very laggy and very slowly at this moment.
I have an idea and i want try to FULL FORMAT and reflash all and after that if it's present here a custom rom (not necessary lollipop.....) i'm opened to all suggestion.
I have looked on sammobile and i have downloaded this:
http://www.sammobile.com/firmwares/download/23434/I9070XXLQL_I9070ITVLQ5_ITV/
I have prepared Odin but i want to aspect some information about someone here contain what i need to do after this full flash for example......... thanks in advance.
DjDiabolik said:
Hi boys&girls
I have in my hand a "old" GT-I9070 very laggy and very slowly at this moment.
I have an idea and i want try to FULL FORMAT and reflash all and after that if it's present here a custom rom (not necessary lollipop.....) i'm opened to all suggestion.
I have looked on sammobile and i have downloaded this:
http://www.sammobile.com/firmwares/download/23434/I9070XXLQL_I9070ITVLQ5_ITV/
I have prepared Odin but i want to aspect some information about someone here contain what i need to do after this full flash for example......... thanks in advance.
Click to expand...
Click to collapse
If you want fast and stable custom rom, then try this: New build of CM10.2 in [Team Canjica] CyanogenMod 10.2 thread.
kilroy69 said:
If you want fast and stable custom rom, then try this: New build of CM10.2 in [Team Canjica] CyanogenMod 10.2 thread.
Click to expand...
Click to collapse
Interesting also it's no more developed
I don't know the world of this smartphone.... how i can find for example the exact custom recovery i can install ? Twrp ? CWM ? Or what ?
DjDiabolik said:
Interesting also it's no more developed
I don't know the world of this smartphone.... how i can find for example the exact custom recovery i can install ? Twrp ? CWM ? Or what ?
Click to expand...
Click to collapse
The phone is too old to stay many developers (not much left) :crying:
Here is CWM: update.zip
If you need kernel, then after flash this: [Kernel][3.0.101] MK kernel r6
I think these files are only going on I9070 phone. I'm not sure that will be fine on i9070p.
If I'm wrong, someone correct me.
kilroy69 said:
The phone is too old to stay many developers (not much left) :crying:
Here is CWM: update.zip
If you need kernel, then after flash this: [Kernel][3.0.101] MK kernel r6
I think these files are only going on I9070 phone. I'm not sure that will be fine on i9070p.
If I'm wrong, someone correct me.
Click to expand...
Click to collapse
Oh yeah great suggestion
Tomorrow i prepare ODIN and flash the latest official rom. After that from stock recovery i thinks i can flash the root.zip for root access....... using flashify for installing recovery and after that finally installed this 10.2 and after that install the kernel here.
I thinks it's not the best solution...... but it's but it's better than nothing I need only to use this i9070 only for emergency or backup smartphone
DjDiabolik said:
Oh yeah great suggestion
Tomorrow i prepare ODIN and flash the latest official rom. After that from stock recovery i thinks i can flash the root.zip for root access....... using flashify for installing recovery and after that finally installed this 10.2 and after that install the kernel here.
I thinks it's not the best solution...... but it's but it's better than nothing I need only to use this i9070 only for emergency or backup smartphone
Click to expand...
Click to collapse
This is the right order for me after Odin;
in recovery: wipe, flash update.zip, flash mkkernel zip, flash root.zip and then custom rom + gapps.
I don't flash kernel on custom rom. You know that you need it or not. I think that's unnecessary. I would rather flashing kernel before flashing custom rom.

Categories

Resources