A friend of mine has an SCH- I537 that justbstays in Download mode, he was trying to update it and something went wrong, so I looked on SamMobile and there are a lot of versions(Mexico Urugay etc) which one should I flash in Odin?
The phone is from AT&T
Thank you guys
Sent from my D2305 using XDA Free mobile app
Alfred1516 said:
A friend of mine has an SCH- I537 that justbstays in Download mode, he was trying to update it and something went wrong, so I looked on SamMobile and there are a lot of versions(Mexico Urugay etc) which one should I flash in Odin?
The phone is from AT&T
Thank you guys
Sent from my D2305 using XDA Free mobile app
Click to expand...
Click to collapse
Assuming you have the AT&T version of the i537, then look here: http://forum.xda-developers.com/showthread.php?t=2892445
Devo7v said:
Assuming you have the AT&T version of the i537, then look here: http://forum.xda-developers.com/showthread.php?t=2892445
Click to expand...
Click to collapse
thanksssssssssssssss
Alfred1516 said:
thanksssssssssssssss
Click to expand...
Click to collapse
Im having an issue that when Odin says selecting PIT its says FAILED and i can flash the stock rom, i need your help @Devo7v
PD: re-pratition wasnt checked
Alfred1516 said:
Im having an issue that when Odin says selecting PIT its says FAILED and i can flash the stock rom, i need your help @Devo7v
PD: re-pratition wasnt checked
Click to expand...
Click to collapse
Are you flashing the entire Odin package or are you just trying to flash a pit file? What firmware are you currently on and what firmware are you trying to flash? What steps are you taking that it's failing? Can you post the Odin log?
Devo7v said:
Are you flashing the entire Odin package or are you just trying to flash a pit file? What firmware are you currently on and what firmware are you trying to flash? What steps are you taking that it's failing? Can you post the Odin log?
Click to expand...
Click to collapse
Im fixing it and its not mine so i dont know which version it was running,
Today i itried with the Odin_I537UCUBML2.zip and i put the AP on PDA, BL on BOOTLOADER,
CP on Phone; the PIT on the PIT place and CSC on CSC and i got this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I537ATTBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Added!!
<ID:0/011> Removed!!
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011>
<ID:0/011> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I need your help ASAP @Devo7v
thanks
Second try wiith oficial samsung rom and same thng
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I537UBUBNI1_I537TFGBNI1_I537UBUBNI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)ry with Odin and
Alfred1516 said:
Second try wiith oficial samsung rom and same thng
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I537UBUBNI1_I537TFGBNI1_I537UBUBNI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)ry with Odin and
Click to expand...
Click to collapse
This last one you tried to flash is never going to work because it's not AT&T i537 Firmware. I would try flashing the NE3 Odin package, it's got the latest bootloader do it should work. Give it a shot and let me know.
Okey I will try to flash the I537UCUCNE3 full package then I will let you know thanks, do I need pit for this o no?
Did iI placed the files in the right order on Odin? @Devo7v
Sent from my D2305 using XDA Free mobile app
Alfred1516 said:
Okey I will try to flash the I537UCUCNE3 full package then I will let you know thanks, do I need pit for this o no?
Did iI placed the files in the right order on Odin? @Devo7v
Sent from my D2305 using XDA Free mobile app
Click to expand...
Click to collapse
I have no idea if you placed them in the right place, but it seems like you did. As long as you follow the instructions and it looks like the pictures you should be fine.
Okey I will, but the CP file goes to the Phone chart right?
But i will do it and i will let you know @Devo7v
Thanks
Sent from my D2305 using XDA Free mobile app
Alfred1516 said:
Okey I will, but the CP file goes to the Phone chart right?
But i will do it and i will let you know @Devo7v
Thanks
Sent from my D2305 using XDA Free mobile app
Click to expand...
Click to collapse
Bootloader = BL
PDA = AP
Phone = CP
CSC = CSC
I know you are having problems with the pit file, the CSC file in the Odin package contains the pit file, so if you're having problems with it maybe you have a corrupted download. Try downloading the package again and checking the MD5 against the one that is posted to ensure they match. Before you try the attached file I would try flashing the CSC file only, it should work.
In either case I've attached the NE3 pit file that I extracted from the Odin package. I'm not sure which slot this needs to be flashed in, but be careful because this could brick your phone. This file cannot be flashed through the phone's recovery, you must extract the zip and flash the pit file inside through Odin.
I placed everything on its place and got the same error.......... Im giving up with this @Devo7v
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I537ATTCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Alfred1516 said:
I placed everything on its place and got the same error.......... Im giving up with this @Devo7v
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I537ATTCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It's definitely the AT&T version of the i537 and not the TelCel or Uruguayan version, correct?
It says AT&T on the back cover, is there any other way to confirm that is from AT&T? @Devo7v
Sent from my D2305 using XDA Free mobile app
Alfred1516 said:
It says AT&T on the back cover, is there any other way to confirm that is from AT&T? @Devo7v
Sent from my D2305 using XDA Free mobile app
Click to expand...
Click to collapse
Check the sticker under the battery as well.
It says SGH-i537
Sent from my D2305 using XDA Free mobile app
Alfred1516 said:
It says SGH-i537
Sent from my D2305 using XDA Free mobile app
Click to expand...
Click to collapse
I think you have a bad download then. Try downloading the NE3 package again and try a different version of Odin, 3.07 or 3.09.
Thanks for your help but my friend says he will buy another Mother board or sell the phone, but thanks! a lot
Sent from my D2305 using XDA Free mobile app
I tried to update my old phone from 4.4.2 rooted to 5.0.1 and keep the root by having my cousin do it for me. Unfortunately, he used the guide on here for the normal S4 instead of the S4 Active, leaving me with a phone that says "System software not authorized by AT&T has been found on your phone" and "SECURE FAIL: KERNEL" in the corner. Google searches are fruitless. I have tried using this method, but upon starting ODIN I get this fail message and the following:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I537ATTCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
Click to expand...
Click to collapse
If anyone could help me make my old phone work again, it would be very appreciated.
Hello everyone need some advice/help.
I have an ATT note 3 running 4.3 and I'm ready to upgrade to something newer due to issues. I'm looking to do 5.1.1 or 6.0 but someone told me 6.0 doesn't support call audio. I tried to download and flash from here : http://forum.xda-developers.com/galaxy-note-3/development/rom-unofficial-cyanogenmod-13-0-t3238064 under older versions
but the files do not show up in my Odin version is 3.10.7. I downloaded version cm13.0 20160128. I also downloaded banks dynamic g apps but still see nothing under the download files in odin. Any help is greatly appreciated. I can see the folders but they are all empty or do not contain files that odin recognizes.
So I am even worse off now. I did a factory reset and it wiped everything but it shows my phone is still rooted. It will not connect to play store and wont sync my gmail account though it lets me sign in now. It is also not reading the apps on the sd card. Please help!! It shows 5 gb of data on sd card but no apps.
Ok,
First this is if your note 3 is an AT&T branded device. The boot loader is locked so you can not use a CM 13 ROM. There are only certain workarounds we can do and ROM's to choose from. The highest we can go is OC1 and OC2. This is because we do not have a Kernel to allow us to go higher.
First things first, is to get your phone back to a usable state.
Go to this link http://forum.xda-developers.com/showthread.php?t=2703006
Read it beginning to end, download all the files and then reread the instructions again in the first post. It sounds like you need to start by going back to NC2 and work your way forward. go down to the section that starts like this.
This is from Carl1961, all thanks go to him! He has saved my bacon many times!
UPDATING TO LOLLIPOP AND KEEPING ROOT
FIRST DO THIS
1. You must have Safestrap Recovery working (you can boot to safestrap) If Not go to NC2 Files and Install NC2 Odin Files and get safestrap working.
2. First Do a TWRP Backup if you have not done one.
3. download below files and copy to your SDCARD
"N900A_NL1_Stock_Rooted_Backup" from [How-To] Root N900AUCUDNL1 4.4.4 (12-24-2014) THANKS !!! @muniz_ri and copy to your TWRP backup folder (here is my TWRP Folder TWRP\BACKUPS\0b70b440\N900A_NL1_Stock_Rooted_Backu p
SM-N900A_NL1_Firmware_Recovery-Flashable.zip
N900A_NL1-OC1-KeepRoot_OTA.zip
UPDATE-SuperSU-v2.45.zip THANKS !!! @Chainfire
SM-N900A_N900AUCUEOC1_KERNEL_Recovery-Flashable.zip
1. Boot to safestrap recovery, Press Wipe and slide the slider to ok the wipe.
2. Restore Backup N900A_NL1_Stock_Rooted_Backup This gives us rooted NL1
3. Without leaving Recovery install SM-N900A_NL1_Firmware_Recovery-Flashable.zip This installs the NL1 firmware (or N900A_NL1-OC1-KeepRoot_OTA.zip will fail)
4. Without leaving Recovery install N900A_NL1-OC1-KeepRoot_OTA.zip
5. Without leaving Recovery install UPDATE-SuperSU-v2.45.zip to update SuperSu for Lollipop
6. Without leaving Recovery install SM-N900A_N900AUCUEOC1_KERNEL_Recovery-Flashable.zip to boot to New Lollipop Update.
Well I am trying to revert back to original 4.3 then upgrade and re root but I am getting error messages in odin.
ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N910AUCU1BNK3_CL3164227_QB2947853_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N910AUCU1BNK3_CL3164227_QB2947853_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N910AUCU1BNK3_CL3164227_QB2947853_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N910AUCU1BNK3_CL3164227_QB2947853_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_N910AATT1BNK3_CL3164227_QB2947853_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas? These files were from wen I first rooted my phone in 2014.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N910AUCU1BNK3_CL3164227_QB2947853_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N910AUCU1BNK3_CL3164227_QB2947853_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N910AUCU1BNK3_CL3164227_QB2947853_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_N910AATT1BNK3_CL3164227_QB2947853_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> All threads completed. (succeed 0 / failed 0)
vv<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900AUCUBMI9_N900AATTBMI9_N900AUCUBMI9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sbl1.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Made it to here. On device it says SW REV CHECK FAIL : [sbl1] Fused 2> Binary 1
Try older version of ODIN. This is a common problem when using older files/system.
trying to reload the software on a note 8 and it keeps getting stuck here
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1210)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> NAND Write Start!!
<ID:0/008> SingleDownload.
<ID:0/008> abl.elf.lz4
Odin 3.12.1 & lz4 is the issue. Need to use Odin 13.3.1 for newer FWs that use lz4 compression.
shouren04 said:
Odin 3.12.1 & lz4 is the issue. Need to use Odin 13.3.1 for newer FWs that use lz4 compression.
Click to expand...
Click to collapse
13.3?
Oops, haha. 3.13.1
I have an unlocked AT&T Note 9 that is stuck on Android 8.1.0 Patch 11/1/18.
There is higher existing firmware I have found but I am having no luck getting it to update via OTA where it is on MetroPCS now, and smart switch says it is up to date. When I try to update using Odin 3.14 using a couple of different firmware's I get the same error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1401)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 7842 M
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 7842 M
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Can anyone please help??? I have been reading and working on this for about a month now with no luck.
Try a computer with USB 2.0 or buy a USB 2.0 port hub.
dehart420 said:
I have an unlocked AT&T Note 9 that is stuck on Android 8.1.0 Patch 11/1/18.
There is higher existing firmware I have found but I am having no luck getting it to update via OTA where it is on MetroPCS now, and smart switch says it is up to date. When I try to update using Odin 3.14 using a couple of different firmware's I get the same error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1401)..
<ID:0/006> File analysis..
<ID:0/006> Total Binary size: 7842 M
<ID:0/006> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 7842 M
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Can anyone please help??? I have been reading and working on this for about a month now with no luck.
Click to expand...
Click to collapse
You're trying to update to ARL1?