A friend of mine has an SCH- I537 that justbstays in Download mode, he was trying to update it and something went wrong, so I looked on SamMobile and there are a lot of versions(Mexico Urugay etc) which one should I flash in Odin?
The phone is from AT&T
Thank you guys
Sent from my D2305 using XDA Free mobile app
Alfred1516 said:
A friend of mine has an SCH- I537 that justbstays in Download mode, he was trying to update it and something went wrong, so I looked on SamMobile and there are a lot of versions(Mexico Urugay etc) which one should I flash in Odin?
The phone is from AT&T
Thank you guys
Sent from my D2305 using XDA Free mobile app
Click to expand...
Click to collapse
Assuming you have the AT&T version of the i537, then look here: http://forum.xda-developers.com/showthread.php?t=2892445
Devo7v said:
Assuming you have the AT&T version of the i537, then look here: http://forum.xda-developers.com/showthread.php?t=2892445
Click to expand...
Click to collapse
thanksssssssssssssss
Alfred1516 said:
thanksssssssssssssss
Click to expand...
Click to collapse
Im having an issue that when Odin says selecting PIT its says FAILED and i can flash the stock rom, i need your help @Devo7v
PD: re-pratition wasnt checked
Alfred1516 said:
Im having an issue that when Odin says selecting PIT its says FAILED and i can flash the stock rom, i need your help @Devo7v
PD: re-pratition wasnt checked
Click to expand...
Click to collapse
Are you flashing the entire Odin package or are you just trying to flash a pit file? What firmware are you currently on and what firmware are you trying to flash? What steps are you taking that it's failing? Can you post the Odin log?
Devo7v said:
Are you flashing the entire Odin package or are you just trying to flash a pit file? What firmware are you currently on and what firmware are you trying to flash? What steps are you taking that it's failing? Can you post the Odin log?
Click to expand...
Click to collapse
Im fixing it and its not mine so i dont know which version it was running,
Today i itried with the Odin_I537UCUBML2.zip and i put the AP on PDA, BL on BOOTLOADER,
CP on Phone; the PIT on the PIT place and CSC on CSC and i got this:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I537ATTBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Added!!
<ID:0/011> Removed!!
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> Get PIT for mapping..
<ID:0/011>
<ID:0/011> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I need your help ASAP @Devo7v
thanks
Second try wiith oficial samsung rom and same thng
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I537UBUBNI1_I537TFGBNI1_I537UBUBNI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)ry with Odin and
Alfred1516 said:
Second try wiith oficial samsung rom and same thng
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I537UBUBNI1_I537TFGBNI1_I537UBUBNI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Added!!
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)ry with Odin and
Click to expand...
Click to collapse
This last one you tried to flash is never going to work because it's not AT&T i537 Firmware. I would try flashing the NE3 Odin package, it's got the latest bootloader do it should work. Give it a shot and let me know.
Okey I will try to flash the I537UCUCNE3 full package then I will let you know thanks, do I need pit for this o no?
Did iI placed the files in the right order on Odin? @Devo7v
Sent from my D2305 using XDA Free mobile app
Alfred1516 said:
Okey I will try to flash the I537UCUCNE3 full package then I will let you know thanks, do I need pit for this o no?
Did iI placed the files in the right order on Odin? @Devo7v
Sent from my D2305 using XDA Free mobile app
Click to expand...
Click to collapse
I have no idea if you placed them in the right place, but it seems like you did. As long as you follow the instructions and it looks like the pictures you should be fine.
Okey I will, but the CP file goes to the Phone chart right?
But i will do it and i will let you know @Devo7v
Thanks
Sent from my D2305 using XDA Free mobile app
Alfred1516 said:
Okey I will, but the CP file goes to the Phone chart right?
But i will do it and i will let you know @Devo7v
Thanks
Sent from my D2305 using XDA Free mobile app
Click to expand...
Click to collapse
Bootloader = BL
PDA = AP
Phone = CP
CSC = CSC
I know you are having problems with the pit file, the CSC file in the Odin package contains the pit file, so if you're having problems with it maybe you have a corrupted download. Try downloading the package again and checking the MD5 against the one that is posted to ensure they match. Before you try the attached file I would try flashing the CSC file only, it should work.
In either case I've attached the NE3 pit file that I extracted from the Odin package. I'm not sure which slot this needs to be flashed in, but be careful because this could brick your phone. This file cannot be flashed through the phone's recovery, you must extract the zip and flash the pit file inside through Odin.
I placed everything on its place and got the same error.......... Im giving up with this @Devo7v
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I537ATTCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Alfred1516 said:
I placed everything on its place and got the same error.......... Im giving up with this @Devo7v
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I537ATTCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Set PIT file..
<ID:0/011> DO NOT TURN OFF TARGET!!
<ID:0/011> FAIL!
<ID:0/011>
<ID:0/011> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It's definitely the AT&T version of the i537 and not the TelCel or Uruguayan version, correct?
It says AT&T on the back cover, is there any other way to confirm that is from AT&T? @Devo7v
Sent from my D2305 using XDA Free mobile app
Alfred1516 said:
It says AT&T on the back cover, is there any other way to confirm that is from AT&T? @Devo7v
Sent from my D2305 using XDA Free mobile app
Click to expand...
Click to collapse
Check the sticker under the battery as well.
It says SGH-i537
Sent from my D2305 using XDA Free mobile app
Alfred1516 said:
It says SGH-i537
Sent from my D2305 using XDA Free mobile app
Click to expand...
Click to collapse
I think you have a bad download then. Try downloading the NE3 package again and try a different version of Odin, 3.07 or 3.09.
Thanks for your help but my friend says he will buy another Mother board or sell the phone, but thanks! a lot
Sent from my D2305 using XDA Free mobile app
Related
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> DefaultCalDataWithBoot_S5830iXXKK5_REV00.tar.md5 is valid.
<OSM> PDA_S5830iXXKL1_REV00.tar.md5 is valid.
<OSM> MODEM_S5830iXXKK5_REV00.tar.md5 is valid.
<OSM> GT-S5830i-MULTI-CSC-OXEKK4_RST.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
I have been waiting but it didn't show anything for this stage. How should i do? I want to flash firmware. Please....
paingsis said:
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> DefaultCalDataWithBoot_S5830iXXKK5_REV00.tar.md5 is valid.
<OSM> PDA_S5830iXXKL1_REV00.tar.md5 is valid.
<OSM> MODEM_S5830iXXKK5_REV00.tar.md5 is valid.
<OSM> GT-S5830i-MULTI-CSC-OXEKK4_RST.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
I have been waiting but it didn't show anything for this stage. How should i do? I want to flash firmware. Please....
Click to expand...
Click to collapse
Try uninstalling the drivers, reboot pc, install drivers again, stop any process of kies, then flash again. If not, try using a different usb cable. Some cable are crap LOL If not again, try using different usb ports.
paingsis said:
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> DefaultCalDataWithBoot_S5830iXXKK5_REV00.tar.md5 is valid.
<OSM> PDA_S5830iXXKL1_REV00.tar.md5 is valid.
<OSM> MODEM_S5830iXXKK5_REV00.tar.md5 is valid.
<OSM> GT-S5830i-MULTI-CSC-OXEKK4_RST.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
I have been waiting but it didn't show anything for this stage. How should i do? I want to flash firmware. Please....
Click to expand...
Click to collapse
what odin verion that u use?? can u scroll down on page 1.. i have post how to flash via odin..
http://forum.xda-developers.com/showthread.php?t=1979814
it's an sgh-i537
I'm not experienced in this sort of stuff, but I think my phone is considered "soft bricked"
I can boot it into recovery mode/download mode, but when I go into download mode, odin wont recognize it.
on top of that, when/if I am able to get it to recognize my phone, to my understanding I need to know what MF# I'm running- and I have absolutely no clue what that is. A bit of reading leads me to believe it means Manifest or something like that, but I still have no clue what one I have.
please help an idiot.
magapower said:
it's an sgh-i537
I'm not experienced in this sort of stuff, but I think my phone is considered "soft bricked"
I can boot it into recovery mode/download mode, but when I go into download mode, odin wont recognize it.
on top of that, when/if I am able to get it to recognize my phone, to my understanding I need to know what MF# I'm running- and I have absolutely no clue what that is. A bit of reading leads me to believe it means Manifest or something like that, but I still have no clue what one I have.
please help an idiot.
Click to expand...
Click to collapse
What you're referring to as MF# is actually the last three characters in the firmware build number, which we use to differentiate between different firmware builds. To fix your phone, you have to use Odin v3.09 to restore a stock firmware. Download this file and extract all 4 files within. You have to use all 4 files in Odin, it'll look like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(I know the picture has Odin v3.07 but I've always had success with 3.09). The process will take some time, you must be patient and let it do its thing. When you do this, your phone will automatically reboot on its own a couple times, and one of those times will be to the stock android recovery. This is completely normal. I say this because I've seen so many people freak out when their phone starts doing stuff on its own. Just let Odin go, it knows what it's doing.
I finally got odin to recognize my phone, and I used files you linked to and the top left box turned red and said "Fail!"
In the Messages box...
<ID>:0/003>Initialization..
<ID>:0/003>Set PIT file..
<ID>:0/003>DO NOT TURN OFF TARGET!!
<ID>:0/003>Complete(write) operation failed.
<OSM> All Threads completed. (succeed 0 / failed 1)
<ID>:0/003> Removed!!
<ID>:0/003>Added!!
I would just post a picture, but I'm a new user.
edit:
tried using odin 3.07 and just the AP file, I noticed it added something in the messages...
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm looking at that "There is no PIT partition... thoughts on that?
What android you had after softbrick ... because that file ML2 Firmware is Jellybean if your system kitkat you can't go back to Jellybean or if your System lollipop you can't go back to Kitkat make sure what android is you current system puls check your usb cable.. notes.. if you used to be on lollipop and software brick there's no Lollipop file Odin flash file available on xda only available jellybean and kitkat.. you need to take your phone to best buy you will see Samsung section just tell them I want to flash my phone they will help you ....
Sent from my SAMSUNG-SGH-I537 using XDA Free mobile app
---------- Post added at 10:06 AM ---------- Previous post was at 10:03 AM ----------
Check your usb cable and flash kitkat 4.4.2 Odin files if is failing take your phone to best buy and flash lollipop
Sent from my SAMSUNG-SGH-I537 using XDA Free mobile app
I believe It was 4.2.2 Jellybean. (with AT&T)
I tried to update it to lollipop when this started.
I'm still looking into the whole PIT thing, and even found a download for a PIT file for the i537 but haven't done anything with it yet because stuff I've read say thats more for the development stuff and could really mess up your phone.
magapower said:
I believe It was 4.2.2 Jellybean. (with AT&T)
I tried to update it to lollipop when this started.
I'm still looking into the whole PIT thing, and even found a download for a PIT file for the i537 but haven't done anything with it yet because stuff I've read say thats more for the development stuff and could really mess up your phone.
Click to expand...
Click to collapse
You are flashing the wrong Odin file. You need to flash the files that @thisisapoorusernamechoice linked to. You should be flashing all 4 files at once otherwise you're going to end up with a phone that doesn't work properly.
Devo7v said:
You are flashing the wrong Odin file. You need to flash the files that @thisisapoorusernamechoice linked to. You should be flashing all 4 files at once otherwise you're going to end up with a phone that doesn't work properly.
Click to expand...
Click to collapse
I have been flashing with all 4. on various different Odin versions with different firmware versions.
magapower said:
I have been flashing with all 4. on various different Odin versions with different firmware versions.
Click to expand...
Click to collapse
As was mentioned before, it looks like you're flashing the wrong files. You've flashed ML2 firmware which is why it fails to flash all 4 files. You need to be flashing all 4 NE3 files.
alright, a little headway... I tried all 4 files on odin 3.10 and got further...
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I537ATTBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
at the moment my phone is still plugged in and odin is just hanging on aboot.
thoughts?
magapower said:
alright, a little headway... I tried all 4 files on odin 3.10 and got further...
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I537UCUBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I537ATTBML2_2244695_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
at the moment my phone is still plugged in and odin is just hanging on aboot.
thoughts?
Click to expand...
Click to collapse
Stop using ML2 and use the NE3 files I linked to
thisisapoorusernamechoice said:
Stop using ML2 and use the NE3 files I linked to
Click to expand...
Click to collapse
I tried them, with odin 3.04, 3.06, 3.07, 3.09 and 3.10 and it kept failing right away.
also now the other files aren't getting as far as they did before.
also minor development- for the first time, when I tried to go into download mode, it popped up the "Firmware upgrade encounter an issue. please select recovery mode in kies and try again" screen.
aaaand now even the files that looked like they might work aren't doing ****.
magapower said:
I tried them, with odin 3.04, 3.06, 3.07, 3.09 and 3.10 and it kept failing right away.
also now the other files aren't getting as far as they did before.
also minor development- for the first time, when I tried to go into download mode, it popped up the "Firmware upgrade encounter an issue. please select recovery mode in kies and try again" screen.
aaaand now even the files that looked like they might work aren't doing ****.
Click to expand...
Click to collapse
You're flashing the wrong files. The only way you're going to get this to work is if you flash the NE3 files. You have to make them work. Try downloading it again and check the MD5 to make sure you didn't get a corrupted download.
alright, just put it to rest, I am using the files I was linked to, I did check the md5.
I tried all the following just a few minutes ago
Odin 3.10 (yes running as admin)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I537ATTCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Odin 3.09 (yes running admin)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I537ATTCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Odin 3.07 (yes running admin)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I537ATTCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Odin 3.06 (yes running admin)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Odin 3.04 (yes running in admin)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> AP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> CP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> CSC_ATT_I537ATTCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
I'm wondering if I should try harder using Kies? I can't get kies to connect to my phone (it just hangs on the connecting screen), and when I try to manually input my phone (where you put in the model and S/N), it gives me the message saying that my phone can't be verified.
update to this:
after leaving the phone alone for a week, I decided to give it another go and was somewhat successful I think. This is what happened.
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I537ATTCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> persdata.img.ext4
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> NON-HLOS.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img.ext4
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Removed!!
<ID:0/003> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
now instead of automatically booting to the "connect to keis" screen, it goes to the Samsung S4 active screen and just hangs there.
I can still enter download mode.
Doesn't seem like I can ever recovery mode though. any thoughts on how to progress?
Thanks.
I am trying to root Lollipop on my I537 so I flashed back to KK successfully. Towelroot is successful so I flash LP as instructed using Flashfire but I never got rebooted to download mode. I get stuck on the S4 Active boot screen and the device seems to power down. So I boot to download mode manually and flashed the I537_OC7_Bootloader using odin but still cant get past the Active Boot screen. So I am trying to flash back to KK again. I was able to do this before last night but today I can't seem to get the firmware to flash! Can some one help me?
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_I537UCUCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_I537ATTCNE3_987011_REV06_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
When I try to flash the I537_OC7_Bootloader it says no pit partition found:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CWM-Recovery-gt-i9295_v1-2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
<ID:0/004> Added!!
Ok so I got Odin to flash everything from SGH-I537UCUCNE3_v4.4.2_ATT_ALL and even a pit file i found here. Problem is I get the S4A boot screen and it says booting recovery in blue at the top right but then it dies. Any Ideas? I got Odin to flash by using a USB port on back of my PC on the mobo rather then the front USB ports on the case.
I also do not have access to stock recovery even after a successful NE3 flash with Odin! Have I bricked my device or just soft bricked it?
Anyone?
I tried to downgrade from 6.0.1 to 5.1.1 but my phone never booted up. I'm trying to return to 6.0.1 but I receive the error: "SW REV. Check Fail. Device: 4, Binary: 3" and this is the log for ODIN:
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_G925AUCU3BOJ7_CL5927475_QB6773811_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_G925AUCU3BOJ7_CL5927475_QB6773811_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_ATT_G925AATT3BOJ7_CL5927475_QB6773811_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G925AUCU3BOJ7_CL5927475_QB6773811_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'm using the restore files from the following post: http://forum.xda-developers.com/att.../g925aucs4cpf1-odin-firmware-restore-t3408875
What is going on with my phone? If I check just the AP option then the phone never ends up booting but if I check BL, AP, CP, and CSC then I receive the above error. The ODIN version is 3.10.7
I've been trying to flash the TMobile newest firmware to my unlocked Verizon Note 8 but for some reason the flash didn't occur. It ends with the code:
all threads completed. (succeed 0 / failed 1)
And the installation never starts, is this normal? for VZW phones can i only flash n950U1 firmwares and VZW?
betovanbuuren said:
I've been trying to flash the TMobile newest firmware to my unlocked Verizon Note 8 but for some reason the flash didn't occur. It ends with the code:
all threads completed. (succeed 0 / failed 1)
And the installation never starts, is this normal? for VZW phones can i only flash n950U1 firmwares and VZW?
Click to expand...
Click to collapse
Should be able to...some times you need to perform a factory reset in recovery then back out to main recovery menu and select boot to bootloader then flash using Odin...AP, BL, CP, CSC, and USERDATA...
BlueFox721 said:
Should be able to...some times you need to perform a factory reset in recovery then back out to main recovery menu and select boot to bootloader then flash using Odin...AP, BL, CP, CSC, and USERDATA...
Click to expand...
Click to collapse
I've downloaded the XAA (no carrier bloat) note 8 firmware today N950U1UEU2BQK1, when i enter in download mode and connect to odin, it recognizes the phone but when i click on start it never starts flashing, below the odin log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> userdata.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Do you have an advise to fix this?
Thanks in advance.
betovanbuuren said:
I've downloaded the XAA (no carrier bloat) note 8 firmware today N950U1UEU2BQK1, when i enter in download mode and connect to odin, it recognizes the phone but when i click on start it never starts flashing, below the odin log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> userdata.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Do you have an advise to fix this?
Thanks in advance.
Click to expand...
Click to collapse
Use Prince Comsy's Odin, boot to recovery and perform factory reset then back out to main recovery menu and select boot to bootloader then flash using Prince Comsy's Odin...for some reason the bootloader from recovery has more permission...
BlueFox721 said:
Use Prince Comsy's Odin, boot to recovery and perform factory reset then back out to main recovery menu and select boot to bootloader then flash using Prince Comsy's Odin...for some reason the bootloader from recovery has more permission...
Click to expand...
Click to collapse
Im using price comsy's odin, but i'm accesing with the button combination, i will access recovery and from there going to download mode, let me try and i will report back.
Thanks @BlueFox721
BlueFox721 said:
Use Prince Comsy's Odin, boot to recovery and perform factory reset then back out to main recovery menu and select boot to bootloader then flash using Prince Comsy's Odin...for some reason the bootloader from recovery has more permission...
Click to expand...
Click to collapse
I've access recovery menu and went to bootloader mode from there, but same case, the log is as follows:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> userdata.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Do i need to do the factory reset?? i'm thinking that if i do the factory reset and the result is the same i will need to do the process again to set up my settings....
betovanbuuren said:
I've access recovery menu and went to bootloader mode from there, but same case, the log is as follows:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> userdata.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Do i need to do the factory reset?? i'm thinking that if i do the factory reset and the result is the same i will need to do the process again to set up my settings....
Click to expand...
Click to collapse
Use regular Odin next time...factory reset does matter some times
BlueFox721 said:
Use regular Odin next time...factory reset does matter some times
Click to expand...
Click to collapse
Can i skip the factory reset part or is mandatory?
betovanbuuren said:
Can i skip the factory reset part or is mandatory?
Click to expand...
Click to collapse
It helps sometimes..
BlueFox721 said:
It helps sometimes..
Click to expand...
Click to collapse
Tried with regular odin and same story, no luck. Looks like i may need to do a factory reset...hope that way helps
betovanbuuren said:
Tried with regular odin and same story, no luck. Looks like i may need to do a factory reset...hope that way helps
Click to expand...
Click to collapse
If no luck..try again from factory binary...in other words follow the switching carrier guide but with updated files...that should clean things up...then at step 25 pick XAA or carrier of choice...
BlueFox721 said:
If no luck..try again from factory binary...in other words follow the switching carrier guide but with updated files...that should clean things up...then at step 25 pick XAA or carrier of choice...
Click to expand...
Click to collapse
Can you please point me to the switching carrier guide url?
Guys if it fails at setup connection its the computer. Have to use a different usb port or computer
betovanbuuren said:
Can you please point me to the switching carrier guide url?
Click to expand...
Click to collapse
https://forum.xda-developers.com/showpost.php?p=74087344&postcount=2