Database Develop

[Q] Galaxy Mini bricked, please help!!

Hi,
I tried to install cm7 in my galaxy mini, and when i rebooted it, the screen blacked out and only an android text showed up on the right. I'm using Mac OS X.
What should i do?
Thanks.

Try to wipe data and cache in CWM then reboot..

My Solution
Hey friend I have also faced the same while installing CM7.2rc5.2.I was able to solve by the following way....
1.go to cwm recovery mode and wipe cache partion and wipe data.
2.now again choose the zip file and install the custom rom
3.now,reboot the phone and wait untill u see the cyanogen home screens(may be 15 to 18 minutes)
4.if u get a force close like com.android.home has stopped unexpectedl. .then reboot again.
Hope it helps you.. ..

Another problem
What about if i don't have the cwm recovery???

You tried to install CM7 without a custom recovery?
This should do the trick: http://yagyagaire.blogspot.com/2011/09/installing-clock-work-mod-recovery-in.html

Ok, I'll try, thanks

Wait for seconds and then it will enter the OS.If not so,you can wipe the data and cache then install the cm7 again.

Stuck at samsung logo after flashing to stock rom

Hi guys. Tried to root my Note but got stuck at samsung logo. so I went back to download mode and flashed back to N7000DXLP9 and tried a few other different stock roms as well. But I keep getting stuck at Samsung logo. Please help guys.

Simply go to recovery mode. Wipe catch / factory reset - reboot

chintamanijaipuri said:
Simply go to recovery mode. Wipe catch / factory reset - reboot
Click to expand...
Click to collapse
tried that many times but still stuck at samsung logo

any other suggestions?

Have Same Problem Brother
mee too got same problem any help would be appreciated..!

How long did you wait. I found that after installing a new rom or factory wipe that it would take up to 5 minutes to boot. It would just sit at the samsung logo with a pulsing glow for ages.
Maybe you just need to give it more time?
What tools and packages did you use?

zolakt said:
tried that many times but still stuck at samsung logo
Click to expand...
Click to collapse
Wipe cache, do a factory reset, wipe dalvik cache. If still stuck, it looks like a bad flash/kernel problem. Try flashing it again.

Finally succeed
It's work for me, I simply entered my galaxy S3 into recovery, make factory reset, wipe chache and then reboot and my S3 finally boot normally. Thank You all.

Make my thorough wipe as below when flashing a new ROM:
1) Wipe data
2) Wipe cache
3) Wipe dalvik cache
4) Format /system & /preload
5) Format internal sdcard (make sure you save anything you need before)
6) Flash ROM
7) Wipe cache again
8) Wipe dalvik cache again
9) Reboot
This way you ensure you flash your new ROM in a completely clean environment. Then when booting the new ROM, wait some time before saying it's stuck at the boot logo. As people already said, sometimes it takes a long time to display the setup screen (but should be less than 8 minutes in any case). I'm assuming you have CWM to do this; if you don't, try the equivalent in the stock recovery (but it doesn't have all these options), poweroff, boot in download mode, then flash using Odin.
ATTENTION: make sure you make the wipes using a brick-free kernel! Search the forums if you don't know what it is. If you don't, you may brick your phone. You should flash a brick-free kernel before anything, without any wipes (it can be done through Odin if you download a safe kernel in this format); then you are ready to go with the wipes and flashing a new ROM.

my j500h keeps on restarting just after displaying samsung logo. i have tried nearly everything but seem to be stuck on the same bootloop. any idea am so stressed up.

Trying to upgrade from cyanogen 9 to cyanogen 10 now missing phone and camera apps.

I have the GT-i9000M
I did not put Cyanogen 9 on myself, the phone was given to me with it on it. I wanted to upgrade to cyanogen 10 so I followed the instructions here: http://forum.xda-developers.com/showthread.php?t=1778526 .
"- Upgrading from CM7/CM9?
Do a Nandroid Backup!
WIPE (wipe data/factory reset + wipe cache partition)
Install the ROM from internal sdcard using ClockworkMod Recovery
Optionally install the Google Addon"
Did my nandroid backup obviously, wiped everything, then I went to "install zip from sdcard" picked "cm-10-20120726-UNOFFICIAL-galaxysmtd.zip" then my phone went into a reboot loop of just failing. So I went back into recover with 3 button combo and wiped everything again and restored from my nandroid backup, then when I booted back up I had no lockscreen and my phone and camera apps were gone.
What did I do wrong and how do I get those back and/or upgrade to cyanogen 10 properly?
Keep in mind this is my first time doing anything like this to my android, I was given it with cyanogen 9 on it.
Edit: Now when I try restoring from my nandroid backup and reboot all I see the is the cyanogen (mod) 9 animation boot screen forever, it never boots.

fastfreddy101 said:
Edit: Now when I try restoring from my nandroid backup and reboot all I see the is the cyanogen (mod) 9 animation boot screen forever, it never boots.
Click to expand...
Click to collapse
First i9000M is not same as I9000 http://forum.xda-developers.com/showthread.php?t=886158
so you need to check for compatibility problems
This procedure is for i9000
1. Using CWM, make sure to wipe data/factory reset, then wipe cache, and then go into advanced, and wipe the Dalvik cache too.
2. From there, flash the ROM
3. Afterwards, repeat the wipe step (step #1).
4. Continuing on, go into advanced and fix permissions.
5. Finally, reboot the device.

Thanks for the reply!
I finally got it by wiping everything and the dalvik cache, and reinstalling the zip from the SD card, got everything working now.

[Q] I9305 Won't boot new rom

Hi. My galaxy s3 4g I9305 OPTUS AUSTRALIA. has been rooted cwm installed. I have tried to install Xtreme.v6.1 and supreme rom 5.0. Neither would fire up after multiple attempts. I have wiped delvic cache, cache partition, wipe data/ factory reset, battery stats and fix permissions.
both roms load (flash) sucessfully then I get the samsung reboot screen and after that a pulsing samsung logo which stays for hours. can any one tell me what I may have missed? Flash is done via cwm install zip from sd card.

tommo the noob said:
Hi. My galaxy s3 4g I9305 OPTUS AUSTRALIA. has been rooted cwm installed. I have tried to install Xtreme.v6.1 and supreme rom 5.0. Neither would fire up after multiple attempts. I have wiped delvic cache, cache partition, wipe data/ factory reset, battery stats and fix permissions.
both roms load (flash) sucessfully then I get the samsung reboot screen and after that a pulsing samsung logo which stays for hours. can any one tell me what I may have missed? Flash is done via cwm install zip from sd card.
Click to expand...
Click to collapse
Try to do the 3 wipes...

I would try TWP recovery, as big as CWM is I have found many bugs and such with it and so far absolutely zero with TWP. Is it giving you any errors when trying to flash via CWM? Read the text because it may just be warnings and install anyway. There are also logs you can upload (go to advanced settings I believe)
Sent from my GT-I9305 using xda premium

Yea, Try this recovery : http://forum.xda-developers.com/showthread.php?t=2140681

[Q] Stuck after reboot

Hi there, I flashed my note from [4.1.2 JB]Ultimate N7000 LT4 JB 4.1.2 v6 to AllianceROM_JB XXLSZ_v3.
But after the install, i found out that the new Rom was a bit laggy for me, so i decided to restore to my previous Ultimate ROM.
I did not do a data/factory reset or wipe cache partition before choosing the Ultimate JB backup.
The phone now is restored to Ultimate JB, it does turn on and load pass the samsung logo but it will stuck on the first page, can't go to another page or select any app or do anything.
What should i do now? I can go to recovery mode.
Philz Touch 4 CWM base 6.0.3.1
Thanks for your help!

janc123 said:
Hi there, I flashed my note from [4.1.2 JB]Ultimate N7000 LT4 JB 4.1.2 v6 to AllianceROM_JB XXLSZ_v3.
But after the install, i found out that the new Rom was a bit laggy for me, so i decided to restore to my previous Ultimate ROM.
I did not do a data/factory reset or wipe cache partition before choosing the Ultimate JB backup.
The phone now is restored to Ultimate JB, it does turn on and load pass the samsung logo but it will stuck on the first page, can't go to another page or select any app or do anything.
What should i do now? I can go to recovery mode.
Philz Touch 4 CWM base 6.0.3.1
Thanks for your help!
Click to expand...
Click to collapse
Does your backup have the preload partition included?
Most of custom roms use it to load system apps.
Did you wipe the phone before restoring?
If not try to format data, system and preload partitions with thé recouvert.
Then do a factory reset.

lionelia said:
Does your backup have the preload partition included?
Most of custom roms use it to load system apps.
Did you wipe the phone before restoring?
If not try to format data, system and preload partitions with thé recouvert.
Then do a factory reset.
Click to expand...
Click to collapse
Hi, thanks for the reply.
What is preload partition?
I did not wipe my phone before restoring, i should have but i have forgotten to...
I can't do a factory reset because the screen will be stuck on the first page after a successful reboot.

janc123 said:
Hi, thanks for the reply.
What is preload partition?
I did not wipe my phone before restoring, i should have but i have forgotten to...
I can't do a factory reset because the screen will be stuck on the first page after a successful reboot.
Click to expand...
Click to collapse
Factory reset can be done while in recovry.

lionelia said:
Factory reset can be done while in recovry.
Click to expand...
Click to collapse
OK. so after the factory reset.
I could restart the phone but the phone got stuck while setting up the phone, e.g. wifi password and google account.

janc123 said:
OK. so after the factory reset.
I could restart the phone but the phone got stuck while setting up the phone, e.g. wifi password and google account.
Click to expand...
Click to collapse
Good new, your phone is fine. Try the folowing..
Enter recovery, do a factory reset and WITHOUT exiting from recovery, flash your backup.
If you have an option to clean the phone chose it, recovery asks you if you want to install a new rom, and then your phone will be ready to flash your backup.
If not you can do it manualy under the ''mount And storage'' menu.
Format only partitions named '' system'', ''data'', And '' preload''