Database Develop

i9000 bricked, but goes to download mode - rescuable?

So here't the full background, it's not long, please read:
http://www.darkyrom.com/community/i...-bricked-my-sgs-wonder-what-i-did-wrong.2032/
Long story short, it looks like I bricked my SGS when trying to flash with Odin, even though I followed the tutorial very closely. When I power up the phone, it just gives me the image with phone, exclamation mark and PC on it. It does, however, go into download mode when powered up with VolDown and center button.
How do I save it? Do I need the JIG (God, please say no! )

Have you tried reflashing with odin.
Jig is only needed when you cant get into download mode.
Also i just looked inside the darky rom topic.
Have you flashed the jvk rom first with the bootloaders?
Edit: as said below. If you gonna reflash, flash a stock rom. Not the darky rom. First priority is to make your phone work.
Sent from my GT-I9000 using XDA Premium App

Yeah, you have download mode.
Now, fire up Odin and load a few rom files into it, connect the phone and see if the PC still recognises it. (Do not flash, Just a test)
If so...
Flash a stock rom.

Somehow, I was able to flash it with Odin in Download Mode this time. Phew! I read somewhere that the flash might fail if You're using wrong USB port. At first I connected my phone to a eSATA/USB combo port, and for the second time (after brick) I tried a normal USB 2.0 port in my laptop. Maybe that's what made the difference, I have no idea.
Anyway, I'm running stock Samsung 2.3 rom and am trying to install Darky's 10.0 RC3 on it - I am running into some problems, but thankfully they're much less serious than the brick that I was able to fix.
Thanks for Your help!

I ran into similar problems last week. A rom wouldn't flash, so I gave it an hour and it proceeded nowhere. Had to pull the plug on it.
Sometimes it just takes a few times plugging and unplugging repeatedly until it just happens to get detected by Windows. Maybe just a bit of luck too
Congrats on your recovery.

Just wondering which stock 2.3 rom did you use and which Odin setting you used to get your phone up and working again.
Here is my post / problem, seems similar to yours
http://forum.xda-developers.com/showthread.php?t=1020223
Thanks

I had the same issue like warnec on my first darkyy flash, finally everything went fine...don't worry!
just try to reflash with odin (maybe going for a stock version first is a good idea), be sure to do everything as mentioned in the guides out there. and be sure your computer works stable, maybe you want to quit some tasks in the background (however it should work even without but something crashed my odin once...)

Reflash with Odin to make your phone work again. I suggest using a stock 2.2.1/2.3.3 ROM. It is important that it consists of the 512.pit file, a PDA file, a Phone file and a CSC file. The ROM must have bootloaders included!
Now, disconnect your phone and turn it off.
Start Odin and load all the files. Tick 'Repartition'.
Start your phone in Download Mode by pressing Vol-Down, Home and Power.
Connect it to your PC and wait for Odin to say 'Added!'.
Now hit Start, wait 2-3 minutes until it is done and your phone should succesfully reboot!
Sent from my GT-I9000 using XDA Premium App

Thanks I tried this and my phone just keeps flashing i9000m screen, then blank and then back to the i9000m screen. Looks like the phone is unusable.

chriszak said:
Thanks I tried this and my phone just keeps flashing i9000m screen, then blank and then back to the i9000m screen. Looks like the phone is unusable.
Click to expand...
Click to collapse
does not sound very good...could you solve your problem yet?

Had to take the phone into Bell. Waiting on return of it and currently using a loaner HTC Desire Z from Bell.

having trouble switching ROMS

I am working on a friend's captivate (att) and I have him running cognition ROM right now. Unfortunately, it still sucks and he hates his phone. I want to flash cyanogenmod to the phone, but I need to restore it to stock first (I think). I am trying to use AIO tool to flash the phone to stock, but ODIN hangs when I start it. Is there another way to switch ROMS without flashing back to stock first? I don't have to flash to stock with my Optimus V, so why it the Captivate such a PITA phone to mess with? Please help me. I am tired of my buddy complaining about his phone every day.

super coffee said:
I am working on a friend's captivate (att) and I have him running cognition ROM right now. Unfortunately, it still sucks and he hates his phone. I want to flash cyanogenmod to the phone, but I need to restore it to stock first (I think). I am trying to use AIO tool to flash the phone to stock, but ODIN hangs when I start it. Is there another way to switch ROMS without flashing back to stock first? I don't have to flash to stock with my Optimus V, so why it the Captivate such a PITA phone to mess with? Please help me. I am tired of my buddy complaining about his phone every day.
Click to expand...
Click to collapse
If the phone doesnt have the gb bootloaders then you can flash CM7 using any kernel with clockworkmod recovery.
Sent from my SGH-I897 using XDA Premium App

I really wouldn't recommend CM7 if your friend isn't into phone development on his own, especially the nightly builds. However, if you're dead set on doing that, just do it without the AIO tool. Flash to stock with Odin one-click and root the phone some way (superoneclick is preferred) and then just follow the steps. Well, you actually don't require stock so long as your phone is rooted and not running GB bootloaders, but it's always safe to just go back to stock anyways.

For some reason though, ODIN will not flash to stock. Sometimes it will get as far as flashing modem.bin, but then it just hangs. It made it all the way to filesystem.rfs once, but again, it hung up. What is going on here? Is it my PC or do these phones just do that?

It could be a variety of problems. I'd reinstall the drivers and ODIN on your computer, because something may not have installed correctly. I know that I've never had any issues going back to stock with ODIN.

Now after failing so many times to flash the phone, I can't even get it to go into download mode anymore. I am using the volume up+volume down and plug usb method, but that all of a sudden will no longer start the phone. I am afraid that I may have bricked it. Any ideas?

super coffee said:
Now after failing so many times to flash the phone, I can't even get it to go into download mode anymore. I am using the volume up+volume down and plug usb method, but that all of a sudden will no longer start the phone. I am afraid that I may have bricked it. Any ideas?
Click to expand...
Click to collapse
Is it doing anything? Showing any power?
Sent from my SGH-I897 using XDA Premium App

super coffee said:
Now after failing so many times to flash the phone, I can't even get it to go into download mode anymore. I am using the volume up+volume down and plug usb method, but that all of a sudden will no longer start the phone. I am afraid that I may have bricked it. Any ideas?
Click to expand...
Click to collapse
Try the ADB method, instructions on this page:
http://forum.xda-developers.com/showthread.php?t=884364
If all else fails, building a jig is very easy and cheap. My best guess is you had something installed incorrectly on your computer and when ODIN tried to do its thing it froze and then "software-bricked" your friend's captivate.

[Q] Stuck on boot screen, 3 hours in.

Hello!
I know that I should have done a lot more research before jumping in but here is what happened. I have also looked everywhere in the captivate forums with no luck. I upgraded to stock Gingerbread from Froyo a while back, yesterday I decided that I wanted to root, which I accomplished with Odin. The rooting went just fine, after that I wanted to flash ICS Slim onto my phone, which I soon realized I needed clockworkmod recovery for. After research found out that it doesn't work using ROM manager so I followed a guide to install it and here is where things went sour, following the guide I installed Hardcore’s SpeedMod Kernel it rebooted and it started normally, passing the AT&T bootscreen but now I am completely stuck on the screen after saying "GALAXY S SGH-l897" and on bottom "SAMSUNG". I am able to access the downloading screen and I just do not want to do anymore damage than I have already.
TL;DR: I'm stuck on boot after installing Hardcore's speedmod kernal, able to get on download screen, don't want to do anymore damage. Long story short, what can I do to repair my phone to a usable state?
Google "Flash ClockworkMod Recovery to Samsung Captivate" 3rd link down to see the guide that I used.
Thank you for taking the time to help!

I think hardcore speed mod kernel is for froyo/eclair that's why you're boot looping, but clockwork mod should work. Try using the three button combo to get into recovery and flash whatever captivate ICS ROM you chose, assuming you have the file in your internal SD.
Sent from my SGH-I897 using XDA

thanks for the reply, unfortunately I don't have any ROM on my internal at all, is there a way to flash a ROM from odin or another software? Or do I have to use the clockworkmod recovery to flash it on?

You can mount USB storage from recovery, so transfer the ROM to your sd card that way
Sent from my ICS Samsung Captivate

Edit: removed cause you beat me to it

Yes, there is a list of stock Odin one click packages in the development forum stickies.
Sent from my SGH-I897 using XDA

I am trying to mount the USB Mass Storage from ClockworkMod Recovery v2.5.1.0, but nothing will appear onto my computer, if I could get this to mount could I flash 2.3.5 using Kies Mini? Would the wipe data/factory reset help me here?

Try reinstalling samsung drivers to get your phone recognized. Since you're on 2.3.5 already, Kies will not let you re-download because it assumes you're on the latest firmware already. Use the Odin one click package. Or heimdall one click.
Don't rush. If you're still unsure keep searching. Read thoroughly so errors won't happen
Sent from my SGH-I897 using XDA

No wiping will not help you lol. Its better to flash back to 2.3.5 and start fresh.
Sent from my SGH-I897 using XDA

Thanks for all of the help! I was finally able to mount the phone and transfer the rom, installed it after with little trouble.
Sent from my SGH-I897 using XDA

I've got the same problem with my phone, but I arrived there thru different means.. I used an app called Kernel Manager Light, and believe I tried flashing something called like Fastloader, or Fast boot loader.. something.. anyways, looked good for a minute, while it flashed it, then rebooted my phone & since then, it doesn't load past a screen that reads "GALAXY S" then smaller and below it "SGH-I897".. then across the bottom, "SAMSUNG".. Totally stuck there, for DAYS. I've been reading these forums for what seems like ever, and this is the closest scenario I've found to my own situation.
I can't get my phone into download mode no matter what I do. I can't get into it thru ADB. All I get is that screen.
In ADB, when I type C:/ADB devices, it will sometimes recognize my device (tho more often than not it won't) and even whwn it does, as soon as I try to access my phone thru ADB, it just freezes up too.. I hit enter, and the cursor drops down to the next line, but nothing ever happens from there.
Someone please help..?

JH480 said:
I've got the same problem with my phone, but I arrived there thru different means.. I used an app called Kernel Manager Light, and believe I tried flashing something called like Fastloader, or Fast boot loader.. something.. anyways, looked good for a minute, while it flashed it, then rebooted my phone & since then, it doesn't load past a screen that reads "GALAXY S" then smaller and below it "SGH-I897".. then across the bottom, "SAMSUNG".. Totally stuck there, for DAYS. I've been reading these forums for what seems like ever, and this is the closest scenario I've found to my own situation.
I can't get my phone into download mode no matter what I do. I can't get into it thru ADB. All I get is that screen.
In ADB, when I type C:/ADB devices, it will sometimes recognize my device (tho more often than not it won't) and even whwn it does, as soon as I try to access my phone thru ADB, it just freezes up too.. I hit enter, and the cursor drops down to the next line, but nothing ever happens from there.
Someone please help..?
Click to expand...
Click to collapse
Might want to get a $5.00 jig its saved my ass whenever I brick
Sent From My ICS Cappy Using Tapatalk 2

Stuck on bootscreen
!!! HELP !!! I'm very wet behind the ears when it comes to this!!! HENSE my username. this started after connecting my cap. to a pc with intentions of exporting some pics. that initial (1st) and Only pc notification about detecting a usb device, my cousin sitting down at the monitor clicked outside the bubble message. Now from this point on which was several attempts i would get could recognize device msg. I did not know this was gonna be the results, i can actually remember noticable gliches and flaws progressively worse and worse. icons looking like they had a bulb burning out, awful lag in dialer and or any commands. I know now after reading similar posts my attempts to back-up,recover, i did several restore sessions,wiped data & system in a last ditch effort to get my phone back! i was on the road out of my state. not a comforting situation. I'D REALLY APPRECIATE THE HELP! I'M LEARNING AS I CRAWL ALONG HERE, WITH THAT BEING SAID I'M NOT FAMILIAR WITH ALOT OF THE LINGO! symbols , abbreviations , etc:crying:

Ur post is confusing...
What firmware are u on -- Eclair, Froyo, Gingerbread ??
Did u get ur pics copied off of the phone and to the pc. Under the Settings in ur phone is a USB connection setting to select for when u want to transfer stuff to ur pc.
If ur phone is still jacked up from the multiple backup and restores u did, then u may just have to do a Factory Reset from the Settings menu to get things back to normal...but do understand that that means all ur pics and other stuff will get erased, etc.
If the Factory Reset doesn't work, then I would say get into download mode and flash a Stock firmware (GB 2.3.5 i897ucKK4 being the latest official) and then proceed forward from there however u want.
See the stickied threads in the Q &A and Dev forums for help with flashin to Stock and Dev Roms.
Sent from my SGH-I897 using xda premium

[Q] ROMs Not Flashing After Kernel Flash

Okay, so I have installed Speedrom kernel earlier, then tried to flash ICSSGS, and after it restarted the phone, it went to the Samsung Captivate logo. I reflashed Speedrom via Heimdall. Once it restarted I continued into reflashing ICSSGS from CWM. It continued installing, and I selected the options I wanted (I tried both kernels, to no avail). After it said it was done and restarted I was greeted by the Samsung Captivate logo. I have been stuck here ever since.
I was running I897UCKB2.
I can access download mode, recovery, I can flash new recoveries and new roms. However no roms actually flash. I have searched all over and can not seem to find anyone with exactly the same results. Maybe I am searching the wrong terms.
I have tried Kies, but can not get into the phone, so I can not use it. I have tried odin3 1.7, I have also tried several odin one click setups, all of which connect to the phone, and attempt to install, 2-3 hours later, or even 8 i come back to it still frozen. When I restart the phone I am stuck at the /!\ screen. using the UnBrickable mod, I can get it back into recovery, I can not get it to go any other way besides UnBrickable Mod.
I also can not access ADB or fastboot, it is always waiting on the device.
I am at a complete lost here. Tomorrow I plan on launching Ubuntu and seeing if I can fix the issue.
Does anyone know why the ROMs are ot flashing correctly?
edit: I should add that after attempting to install ICSSGS my phone is no longer recognized at i897 and incapable of installing CM9. After changing the build.prop I am still unable to get it to recognize. As of now attempting to install CM9 installs CWM 5.5 and reboots, and then never does anything.

Try using nexus drivers on ur pc.
Then if u can get into download mode, flash to stock of ur choice and then use TRusselo's Guide, that is stickied in the Q & A forum, to proceed further.
U can use the /!\ screen as a download screen.
Sent from my SAMSUNG-SGH-I777 using xda premium

I woke up this morning with it still stuck at Firmware upgrade. My computer went to sleep during the night.. Thought I had turned it off. Luckily it looks like when I turned it on, Odin One-Click for 2.1 started up and started flashing it. Phone restarted and actually appears to be doing something.
So I guess Flash Odin Twice?

4-2ndtwin said:
Try using nexus drivers on ur pc.
Then if u can get into download mode, flash to stock of ur choice and then use TRusselo's Guide, that is stickied in the Q & A forum, to proceed further.
U can use the /!\ screen as a download screen.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
As for Trusselo's Guide, its the one I followed
http://forum.xda-developers.com/showthread.php?t=1350266
Doesnt flash ROMs for me. I tried it again in Ubunutu. It is a no go. I am not as experienced as I'd like to be flashing, but its not a hard process, So I am very unsure as to whats going on that flashes are not working. Well ROM flashes at least, I now am running, Eclair 2.1-update1. I am going to try to flash a new bootloader, the e2 and see if I can maybe get around the issue I am having.

Not sure why things are not going good for u according to TRusselo's Guide...??
Be sure and read plenty before u flash. Know what u r doing and the risks. Newer Stickied Threads in the Captivate Forums r ur friend.

I tried flashing a few more times, and got nothing. I began to give up, but last second tried installing CM9 Nightly, it went through finally. Haven't done anything different. I checked the videos I recorded to see if I had did anything different. Only Difference is flashing the bootloader twice before running CWM to install CM9.
Glad that nightmare is over. Girlfriend should be very excited that it is working. Now if I only had a 100% Sense free and 100% working ICS for my Amaze.
Thanks for your help.

Glad u got it going. Thx for reporting back.
Sent from my SAMSUNG-SGH-I777 using xda premium

[Q] Any way to get recovery mode to work? DL mode works, Recovery does not.

I have searched for the last 24 hours on this site for any mention of this problem and found nothing. I apologize if it has been covered elsewhere and would appreciate a link if I should be there instead of here. I am new to this forum.
I have an AT&T Captivate that I bought used for my wife. It was rooted and running some version of non-official Gingerbread when I got it (so it had been messed around with).
I have never been able to get into RECOVERY mode having tried every conceivable button and timing sequence at least 1 million times (3-button neutered?). I also have Android SDK installed on my PC and can send the "adb reboot recovery" command but it locks up at the AT&T screen and won't go any further so the PC is talking to the phone but the phone refuses to obey. Yes I have tried different USB ports and cables, un/reinstalling drivers, etc. The weird thing is that I can get into DL mode easily with the batt out, vol+/-,USB cable trick.
I originally took the phone all the way back to a stock Froyo ROM via Odin which appeared to work fine (but still no recovery mode) and then flashed to GB 2.3.5 with Kernel 2.6.35.7-I897UCKK4-CL614489 via "kh3_heimdall_cwm-One-Click_GB_2_3_5.jar"
Phone works OK now but I still can't get into RECOVERY mode. Unless I am mistaken, there are no ROMS available later than GB that can be flashed via Odin- all of the later ROMs need to be installed from recovery mode. The point of all this is that I want to try upgrading to ICS or JB but can't figure out how to do it without a way to get into recovery mode.
So the question is: How can I get recovery mode to work?
And: How can I update the ROM with no way to get into Recovery mode? Is it even possible?
Returning the phone is obviously out of the question as it is "obsolete" and I am not the original owner.
Thank you for any helpful insights.

captivated hippo said:
I have searched for the last 24 hours on this site for any mention of this problem and found nothing. I apologize if it has been covered elsewhere and would appreciate a link if I should be there instead of here. I am new to this forum.
I have an AT&T Captivate that I bought used for my wife. It was rooted and running some version of non-official Gingerbread when I got it (so it had been messed around with).
I have never been able to get into RECOVERY mode having tried every conceivable button and timing sequence at least 1 million times (3-button neutered?). I also have Android SDK installed on my PC and can send the "adb reboot recovery" command but it locks up at the AT&T screen and won't go any further so the PC is talking to the phone but the phone refuses to obey. Yes I have tried different USB ports and cables, un/reinstalling drivers, etc. The weird thing is that I can get into DL mode easily with the batt out, vol+/-,USB cable trick.
I originally took the phone all the way back to a stock Froyo ROM via Odin which appeared to work fine (but still no recovery mode) and then flashed to GB 2.3.5 with Kernel 2.6.35.7-I897UCKK4-CL614489 via "kh3_heimdall_cwm-One-Click_GB_2_3_5.jar"
Phone works OK now but I still can't get into RECOVERY mode. Unless I am mistaken, there are no ROMS available later than GB that can be flashed via Odin- all of the later ROMs need to be installed from recovery mode. The point of all this is that I want to try upgrading to ICS or JB but can't figure out how to do it without a way to get into recovery mode.
So the question is: How can I get recovery mode to work?
And: How can I update the ROM with no way to get into Recovery mode? Is it even possible?
Returning the phone is obviously out of the question as it is "obsolete" and I am not the original owner.
Thank you for any helpful insights.
Click to expand...
Click to collapse
Since you have no problems getting into download mode I suggest you start by going to this link... http://forum.xda-developers.com/showthread.php?t=1300843 Go to the third post and download the Odin one click of KK4 with bootloaders.
After you do the one-click back to stock go to this link... http://forum.xda-developers.com/showthread.php?t=1294477&highlight=corn+kernel and get the odin flashable version of 7.06 or 7.0A and if you don't already have Odin you'll of course need that too. Get yourself back into download mode and flash that kernel and it should give you back your recovery via the 3 button combo.

Worked! (eventually...sort of...)
m1batt1 said:
Since you have no problems getting into download mode I suggest you start by going to this link... http://forum.xda-developers.com/showthread.php?t=1300843 Go to the third post and download the Odin one click of KK4 with bootloaders.
After you do the one-click back to stock go to this link... http://forum.xda-developers.com/showthread.php?t=1294477&highlight=corn+kernel and get the odin flashable version of 7.06 or 7.0A and if you don't already have Odin you'll of course need that too. Get yourself back into download mode and flash that kernel and it should give you back your recovery via the 3 button combo.
Click to expand...
Click to collapse
m1batt1,
Thank you sooo much! It ALMOST worked!
- DL'ed Odin 1-click KK4 w/BL's as suggested, ran it, it failed and semi-bricked my phone... (phone--/!\---comp). Doh!
-Figured you were on the right track so DL'ed "I897UCKK4 Odin One Click - Stock, CONTAINS Bootloaders, Re-partition, Full Wipe" from 4-2ndtwin's post further down the same thread.
-after much anxiety and messing about to get it to connect, it successfully flashed!
-For the FIRST TIME EVER, I can get into recovery mode!
-followed up with corn kernel 7.06 as suggested with no problems
-now that the phone works as advertised, time for JB!
The funny thing is, I went back to stock ROMs several times and recovery never worked until now... go figure...

^
...then it had to be that KK4 one click in that 3rd post that fixed the prob.
Sent from my SGH-I897 using xda premium

I'm glad it got you back up and running! Now get your JB flash on! There are plenty to choose from for our "ancient" captivates.
One word of advice though. Coming from the point you're at now any JB ROM you flash will likely knock you into a boot loop on the first flashing attempt. Nothing is wrong just three button into recovery and flash again.
Sent from my SGH-I897 using xda app-developers app

And back up the efs folder, just in case.
It contains the vital IMEI info. :thumbup:
Sent from my SGH-I897 using xda premium

Thanks a million guys! Slim bean 2.9 up and running!
It Works!
Got to Slim Bean 2.9 through Cyanogen 9.1 and installed the Slim_GApps.
4-2ndtwin: Thanks for the suggestion to back up the efs folder. I hadn't done that before and now I am feeling VERY lucky that my phone still works at all! It lowered my stress level appreciably plus it was good practice using SDK.
m1batt1: Thanks for the heads up on the double flashing of JB ROM! It saved considerable unnecessary panic (although it was still somewhat unnerving)!
Consider both your thank you buttons righteously whacked! :good: