I looked at every forum I could find and almost gave up rooting my KFHD 7", I happened to read on the computer screen that Qemuroot was "opening port 5037" or something very similar and finally remembered the KFHD port was on 3276 or similar .
Why do they not mention ANYWHERE that you have to change to the port Qemuroot uses?
Dany
Related
Hi, i just purchased a galaxy tab 10.1 and it charges fine with usb but when i plug into my PC it says MTP-Connected on the tab but first fails to install on windows than it's not detected at all, i've also tried on my mac with the android file transfer and its not detected either
Galaxy Tab 10.1 - Device not recognised
Hi,
I have the same issue, I am running Windows 7 Ultimate 64bit. This all worked last week and now it is simply not recognised. I have uninstalled all of the drivers and re-installed them again but with no luck. I am wondering if MS has pushed another dodgy update again! The Tab is at 3.1 and is rooted... does anyone have an idea why this is happening?
*checks forum section*
Umm, Im pretty sure this is the Galaxy Tab 7" section. You just might get help if you post in the correct location.
;-)
Sent from my GT-P1000 using XDA App
It's not their fault that this forum is unclearly titled, and you could be a little more helpful too.
Here's the correct forum for your posts...
http://forum.xda-developers.com/forumdisplay.php?f=1050
Edit: I've asked a mod to consider renaming the Galaxy Tab forums to something else like Galaxy Tab 7.0", like the 10" one does, to avoid further confusion.
Make sure the USB Debugging option in Applications is DISABLED. I get consistent detection as usb storage already since I turned that off.
I looked everywhere for this question and found one but it was old topic. WOnder if anyone has found a way to connect their touchpad with android to a tv or monitor?
Dalingrin said it wasn't going to happen through usb. It'd have to be with an app.
Ok i was Messing with my kindle fire hd 7" and it rebooted and i get the following screen read allot of stuff every one posted but one problem i m having is that it is not coming up in windows i plug it in with the usb cable it came with and turn it on it gets to the Kinlde fire system reccovery i get to choose btw it is rooted successfully has been for 2 days. Is the USB cable it came with a factory cable?
reboot your kindle
reset to factory defaults
i did both and still keep coming to this screen
again when i plug in the usb cable is does not make the connecting usb sound in windows and it is not in device manager " AM I SCCREWED" ?
starstremr said:
Ok i was Messing with my kindle fire hd 7" and it rebooted and i get the following screen read allot of stuff every one posted but one problem i m having is that it is not coming up in windows i plug it in with the usb cable it came with and turn it on it gets to the Kinlde fire system reccovery i get to choose btw it is rooted successfully has been for 2 days. Is the USB cable it came with a factory cable?
reboot your kindle
reset to factory defaults
i did both and still keep coming to this screen
again when i plug in the usb cable is does not make the connecting usb sound in windows and it is not in device manager " AM I SCCREWED" ?
Click to expand...
Click to collapse
no its not the cable that came with it. you need to get one. ether make one order it . i cant rember his name but he sells them here on the fourm
by the way what did do before it happened
xiro49 said:
no its not the cable that came with it. you need to get one. ether make one order it . i cant rember his name but he sells them here on the fourm
by the way what did do before it happened
Click to expand...
Click to collapse
I was messing twith the framwork-res.apk to change the lock screen pictures and renamed the file and that is when it all happened.
You should be able to make a fastboot cable and then from your computer push an unedited version of that file...
Or simply use the restore tool in the dev section and go back to stock
Sent from my GT-P3110 using xda app-developers app
i was able to take it back to bestbuy i have the major warranty on it the uy looked at it and did not even do anything on the computer in exchange he just gave me a new one talk about lazy and lucky. but i do want to buy one of these fastboot cables where can i get one.
Scorpion sells them on here... ebay or Amazon has them... google it
Sent from my GT-P3110 using xda app-developers app
Both links you need are in my signature. Remember, back it up before you @#¢¥ it up.
Good Luck.
I know this is the same post but I put it in the wrong section.
I have a Kindle fire HD 7 inch, and I am trying to install CM11 on it but I can't connect it to my PC. When I connect it, it starts charging, but it won't appear on my PC. I tried installing the ADB drivers but it did not work. I also factory reset it, but it still won't connect. Is this the cause of loose solder joints or some other software issue?
This thread actually should be in the 7 inch section
You need to enable adb on the device
Still not connecting
Even after enabling ADB, my Kindle Fire HD still won't connect to my pc
Try another pc
Nope
Still does not appear. Kindle charges fine but could this be a pin problem?
I suppose. It's hard to tell. Try another download of the drivers?
I did download drivers twice
Rushead said:
I suppose. It's hard to tell. Try another download of the drivers?
Click to expand...
Click to collapse
I had run the driver installer twice but this did not make the KFHD visible. I'm not sure if this is a pin problem or a software problem. I'm thinking it is not the pins because the KFHD charges still.
Again, try a new download. Did you get a message saying the drivers installed properly?
williamhancock328` said:
I know this is the same post but I put it in the wrong section.
I have a Kindle fire HD 7 inch, and I am trying to install CM11 on it but I can't connect it to my PC. When I connect it, it starts charging, but it won't appear on my PC. I tried installing the ADB drivers but it did not work. I also factory reset it, but it still won't connect. Is this the cause of loose solder joints or some other software issue?
This thread actually should be in the 7 inch section
Click to expand...
Click to collapse
You can try using a Linux distro instead of Windows
Nope
SafinWasi said:
You can try using a Linux distro instead of Windows
Click to expand...
Click to collapse
Even after using Linux, my KFHD still won't connect and is just charging.
Have you tried a different cable?
Red_81 said:
Have you tried a different cable?
Click to expand...
Click to collapse
Yes, I have but there is no difference.
Then I second your idea that a pin might be busted. You seem to have ruled out everything else.
Then why is it charging
I know it is a broken pin, but why is the Kindle charging?
Most likely only the data pin(s) are damaged. The outer two pins I believe are the ones that handle voltage and ground.
Then I will fix it
I will open the Kindle and attempt to fix the problem. Thanks for your port information.
Hey guys,
bought a fire 7 with Fire OS 5.3.6.4 and wanted to ADB debug. Followed striclty the tutorial and my device was found but with the status unauthorized. Now I kinda know the problem. My Fire doesnt ask me to confirm my PC with an RSA-Key the only thing showing up is that there is a weak loading source connected. I tried probably everything, revoking all trusted Pcs turning ADB off and on, resetting my Fire, used 2 different Laptops one with the same Problem and one where the Fire wasnt even found. Now I really dont know how to fix this problem, if you have any advice or the same problem... Im thankful for every suggestion.
With regarts M.
mariniert said:
Hey guys,
bought a fire 7 with Fire OS 5.3.6.4 and wanted to ADB debug. Followed striclty the tutorial and my device was found but with the status unauthorized. Now I kinda know the problem. My Fire doesnt ask me to confirm my PC with an RSA-Key the only thing showing up is that there is a weak loading source connected. I tried probably everything, revoking all trusted Pcs turning ADB off and on, resetting my Fire, used 2 different Laptops one with the same Problem and one where the Fire wasnt even found. Now I really dont know how to fix this problem, if you have any advice or the same problem... Im thankful for every suggestion.
With regarts M.
Click to expand...
Click to collapse
Because the microUSB cable doesn't have a data (WHITE, GREEN) wiring. Try to use an another microUSB cable with data wiring like Samsung microUSB cable.