Database Develop

[Q] I9000 dead since flash

Hi,
I made a mistake in flashing PDA file of my i9000. The flash stopped after 19 seconds, it was too fast.
About my Galaxy S:
Power button : nothing happen
Download mode : nothing happen
Battery removed/inserted : nothing happen
To resume, whatever I do, screen keep staying black. Nothing display.
Is there anything I can do?
1. USB Jig with a 300K resistor : useless or not?
2. Send it to someone with a RIFF box : useless or not?
Thank you

Weird, usually the SGS is practically un-brickable. I've personally done it tons of flashing to it sometimes with catastrophic results but it always bounced back.
Try sticking ur charger in and let it sit like that for a while. Then try to start the phone. I really doubt bad flashing can fry it. If you get a boot-loop while the screen is blinking release the power button from the starting 3 button combo ( power+down+home) and it should enter download mode.

1. Are you able to charge the phone?? Yes or No
2. What PDA file did you flash? What were you trying to flash?
3. What all things you checked/unchecked in ODIN before pressing the start button to flash?
4. What FW were you on??

prembox said:
1. Are you able to charge the phone?? Yes or No
2. What PDA file did you flash? What were you trying to flash?
3. What all things you checked/unchecked in ODIN before pressing the start button to flash?
4. What FW were you on??
Click to expand...
Click to collapse
1. No way to charge phone
2. I choosed same file for PDA/Phone with i9000XXJVT rom
3. Re-partition/Auto Reboot/F.Reset time checked
Flash lock/Bootloader unchecked
4. FW was Android 2.1, basic one.
Screen stay empty whatever I do, no reaction from the phone.

Get a USB jig. It does wonders most of the time when you think your device is bricked.

USB JIG works fine every time

alyen2 said:
1. No way to charge phone
2. I choosed same file for PDA/Phone with i9000XXJVT rom
3. Re-partition/Auto Reboot/F.Reset time checked
Flash lock/Bootloader unchecked
4. FW was Android 2.1, basic one.
Screen stay empty whatever I do, no reaction from the phone.
Click to expand...
Click to collapse
Re-partition was checked, but did you select a pit file?
If not, that's likely the issue.
USB jigs work great. I bought a couple pre-built ones from Hong Kong just in case I bugger something up.

Huh, was not aware of these USB jigs till this thread. Will definitely be buying one as I flash a new ROM each 3 or 4 days (addiction).

usb jig not working
prembox said:
1. Are you able to charge the phone?? Yes or No
2. What PDA file did you flash? What were you trying to flash?
3. What all things you checked/unchecked in ODIN before pressing the start button to flash?
4. What FW were you on??
usb jig don't work for me. any help
Click to expand...
Click to collapse

same thing happen to me
grrrrr.. after flashing using odin my phone totally dead .. . i have usb jig which is working fine before it happen .. but now not working anymore .
can somebody tell me what happen and what to do .. ?
i charge the phone overnight ..
connect to computer .. not detected
. usb jig .. not going to download mo ..
3 button combo .. grr not working ..
hammer ? hardbrick ? hehehehe .. i hate this ..

yrick27 said:
grrrrr.. after flashing using odin my phone totally dead .. . i have usb jig which is working fine before it happen .. but now not working anymore .
can somebody tell me what happen and what to do .. ?
i charge the phone overnight ..
connect to computer .. not detected
. usb jig .. not going to download mo ..
3 button combo .. grr not working ..
hammer ? hardbrick ? hehehehe .. i hate this ..
Click to expand...
Click to collapse
i m sorry to ask again, is it really i9000? as far as i know, other than i9000 (i9003/i9001 etc) will full brick if u flash i9000 firmware thru odin (as i got one i9003 totally brick when i try to flash i9000 firmware)
sorry if its lame question
Sent from my GT-I9000 using xda premium

compacity said:
i m sorry to ask again, is it really i9000? as far as i know, other than i9000 (i9003/i9001 etc) will full brick if u flash i9000 firmware thru odin (as i got one i9003 totally brick when i try to flash i9000 firmware)
sorry if its lame question
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
yeah its really i9000 ... so sad ... please help

yrick27 said:
yeah its really i9000 ... so sad ... please help
Click to expand...
Click to collapse
if thats the case, it shouldnt fail, even in odin flash fail, fone should boot up, n will occur da pc to fone symbol, hav u tried charging ur fone battery (its also a lame question but please try it)
Sent from my GT-I9000 using xda premium

[Q] my GALAXY S plus dont wont turn on, is it Bricked,Please help....

my Galasy s Plus i9001 , dont wont to turn on after i instal new room from recovery mode
Please advise what can i do now.

do you get into the download mode? hold power, vol-, home
then you can flash with odin

Still doesnt work
dr.wtf said:
do you get into the download mode? hold power, vol-, home
then you can flash with odin
Click to expand...
Click to collapse
I tried many times to download mode or recovery mode but no way it is not turn on , as it is doesnt have bateery,,,, please advise. Thanks in advance

mr_guitar_eg said:
I tried many times to download mode or recovery mode but no way it is not turn on , as it is doesnt have bateery,,,, please advise. Thanks in advance
Click to expand...
Click to collapse
See response in other thread:
If you are 100% sure you cannot enter download mode you really have a problem. Did you try checking the battery? And if you are 100% sure - search the forum, there's some posts about using a JIG to fix it, but most seem to have gone back to Samsung afaik...
What did you do to get your phone in this mode?! Give is some more info on what happened...

Thanks for your fast reply, please see the below details
First i rooted my device as xda wiki said,second i installed an arabic rom from the recovery mode, and it is installed succesfuly, and afterit roeboot, device not start, it seems dont have battery, no buttons work to wake up ths phone,,, any idea...???? I try to charged but nothing happened ,even the battery doesnt got hot,, Please advise,,,, thanks in advance

mr_guitar_eg said:
First i rooted my device as xda wiki said,second i installed an arabic rom from the recovery mode, and it is installed succesfuly, and afterit roeboot, device not start, it seems dont have battery, no buttons work to wake up ths phone,,, any idea...???? I try to charged but nothing happened ,even the battery doesnt got hot,, Please advise,,,, thanks in advance
Click to expand...
Click to collapse
Try removing the battery and charge cable for a while (at least 30 minutes or so). I've not heard this happened before... and try charging with another cable and/or with another charger (for instance a laptop or some other usb device)...

mr_guitar_eg said:
First i rooted my device as xda wiki said,second i installed an arabic rom from the recovery mode, and it is installed succesfuly, and afterit roeboot, device not start, it seems dont have battery, no buttons work to wake up ths phone,,, any idea...???? I try to charged but nothing happened ,even the battery doesnt got hot,, Please advise,,,, thanks in advance
Click to expand...
Click to collapse
Arabic rom ??
Sent from my GT-I9001 using xda premium

rayiskon said:
Arabic rom ??
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
Good catch. What ROM did you exactly try to install??

Gingerbread 2.3 arabic
I think the problem that it is for smsung galaxy s not s plus

nikagl said:
Good catch. What ROM did you exactly try to install??
Click to expand...
Click to collapse
It is a miui rom with arabic language! My phone is from hungary as i live there, so it is europan ,

mr_guitar_eg said:
I think the problem that it is for smsung galaxy s not s plus
Click to expand...
Click to collapse
Never install mods, addons, ROMs, kernels or anything made for whole Another phone.
Yes, that's the problem. I'm very sorry to tell you but you just destroyed your phone's boot.img by installing wrong one. And the wrong boot.img wont let you do anything on your phone. There's no way you could enter to recovery or download mode or anything.
I have no idea about the JIG thing but when I hard bricked my phone, I took it to the reseller and got it fixed for free of charge

Is there a golden card method
Any idea if there is a golden card method to create an boot image to let the phone start again

mr_guitar_eg said:
Any idea if there is a golden card method to create an boot image to let the phone start again
Click to expand...
Click to collapse
Your phone is kind of dead now. You can't push a boot image to it 'cause computer doesn't recognize it properly. Bricked means your phone is just as useful as a brick. It wont turn on in any way and there's nothing else your phone would do.

The JIG costs only 2$ , if that doesn't get u into download mod then u can only revive ur phone with JTAG .
Sent from my GT-I9001 using xda premium

Any details about this 2 methods???

JIG on ebay...
http://www.ebay.pl/itm/USB-JIG-Dongle-unbrick-reset-mod-ROM-para-SAMSUNG-GALAXY-II-2-S2-i9100-ESPANA-/260928351223?pt=LH_DefaultDomain_186&hash=item3cc08aabf7

My advice is go see if u can repair it for free (warranty) , if not u can try the JIG to get u into download mode so u can flash via Odin (there are a lot of clips about JIGs on youtube) , if all that doesn't work JTAG is ur only hope (also there are videos about it on youtube).
Sent from my GT-I9001 using xda premium

Better Soluction
It ocurred me and I go to Movistar Shop and I said that it doesn't boot and I don't know anything and they give me another one with the guarantee.
Try and if not try with JIG ,

me 2, think you installed the wrong rom on the wrong phone..MIUEI rom is not out for the GT I9001, when i bricked my phone =1 medecin= www.broodplank.net (and check how to unbrick your I9001-article)

As the partition layout and even the filesystem is totally different I think you wiped away your bootloader and maybe also radio firmware. If this is your actual situation, it is ver very VERY unlikely you will get your phone alive with a jig. Don't know the partition layout of a 9000 but even the hardware is completely different. Not nucb hope left, very sorry.
Sent from my GT-I9001 using XDA App

[Q]when i burned rom to the phone the battery fall

and no the phone not working in any thing
i cant turn him on
i cant turn RICOVERY MOD
i cant turn the download mod
just noting i don't know what to do please help me :\

If u can't get to download mode,u are sorry to say f.....
have u tried 3 button combo.volume down,home button and on/off pressed simultaneously for 3 sec and release them.

some one tall me that i can get to DOWNLOAD MOD whit JIG
hes right?

Have u tried what I said

zodiaxe66 said:
Have u tried what I said
Click to expand...
Click to collapse
yes i tried
its not the first time i burning rom in the ODIN

Then I think Samsung is your only option.but try the jig.u might get lucky.normally u use a jig if the phone didn't come with the recovery or to reset flash counter.
I'm sorry I couldn't help u.hope u will get your phone fixed
But if u get into download mode write back and I will instruct u how to use Odin properly,without semibricking your phone
Good luck

zodiaxe66 said:
Then I think Samsung is your only option.but try the jig.u might get lucky.normally u use a jig if the phone didn't come with the recovery or to reset flash counter.
I'm sorry I couldn't help u.hope u will get your phone fixed
But if u get into download mode write back and I will instruct u how to use Odin properly,without semibricking your phone
Good luck
Click to expand...
Click to collapse
thanks for the help man ill wait for more people to see what they can tall me
ill tall you if i get a JIG and he work

does it shows Samsung startup screen?

hassi4042 said:
does it shows Samsung startup screen?
Click to expand...
Click to collapse
no :\

hmm JIG last option :/

hassi4042 said:
hmm JIG last option :/
Click to expand...
Click to collapse
:\
ok thank you all

OK so try plugging the phone into computer and see if Odin recognizes the phone. I've had problems like that where you have no recovery or dl mode and that usually works for me. Try to turn your phone on before you plug it in. Hopefully this helps. Hit thanks if it does.
Sent from my GT-I9000 using XDA

[Q] Severly bricked phone! what to do?

A friend of mine came forward with a bricked phone and asked me to fix it. It could not boot into android nor enter recovery mode (it just stays there infinitely).
I figured the last resort would be to use odin mode and flashing the stock rom so I did a little search an came up with this article.
But when I tried to flash the stock image there was an error in the process. You can seen a screenshot of the result down below.
Now I have no idea what to do next!!!
Please help me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

http://forum.xda-developers.com/showthread.php?t=1667886
Sent from my GT-N7000 using xda app-developers app

Once u get this error on odin.. u cannot do a retry till u reboot ur phone. As its not booting try removing the battery for 10 secs and put it in and try odin again
Sent from my GT-N7000 using xda premium

praetorius said:
http://forum.xda-developers.com/showthread.php?t=1667886
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Thanks but there is total mess in that thread. I don't know where to begin and what to do.
nokiamodeln91 said:
Once u get this error on odin.. u cannot do a retry till u reboot ur phone. As its not booting try removing the battery for 10 secs and put it in and try odin again
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Yeah I figured that out. But I get the same error upon retry.

PM forest he's an expert on recovering bricks.
Sent from my GT-N7000 using xda premium

@op
I still doubt it bricked or not
Once try this
Find first line on my sign for note 1 and go to post #2
Get kl3 India rom (installation instructions there)
Before flashing that rom make sure
-un install kies, and install usb driver (find from toolbox on my sign)
-close firewall, anti virus
-use different usb port, don't use any extension cable
-download pit file from toolbox on my signature and select for pit (don't unchecked re-Partition, it will auto select once you add pit)
And select tar file for pda
And flash
If it is successful then wipe cache and data from recovery.
Sent from my GT-N7000 using xda premium

dr.ketan said:
@op
I still doubt it bricked or not
Once try this
Find first line on my sign for note 1 and go to post #2
Get kl3 India rom (installation instructions there)
Before flashing that rom make sure
-un install kies, and install usb driver (find from toolbox on my sign)
-close firewall, anti virus
-use different usb port, don't use any extension cable
-download pit file from toolbox on my signature and select for pit (don't unchecked re-Partition, it will auto select once you add pit)
And select tar file for pda
And flash
If it is successful then wipe cache and data from recovery.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I got some questions. Should I flash the PIT file before flashing the ROM or just along with it?
And here is a picture of the bricked device when I attend to enter recovery by pressing (Vol Up + Home + Power). Same thing happens when trying normal boot.

Flash both kl3 and pit file at the same time.
Sent from my U1 using xda premium

Thanks. I'll try it tonight.

And don't uncheck re-partition, as it will auto check once you select pit.

Thanks also Dr. Ketan for answering my pm, I hope you dont get tired of me.
Sent from my U1 using xda premium

Oh never
But didn't get your pm recently
Sent from my GT-N7000 using xda premium

hey yr phone is not bricked.
NoobSibot said:
I got some questions. Should I flash the PIT file before flashing the ROM or just along with it?
And here is a picture of the bricked device when I attend to enter recovery by pressing (Vol Up + Home + Power). Same thing happens when trying normal boot.
Click to expand...
Click to collapse
Looking at the image as per my knowledge its only failed to flash firmware n its lik half dobe.
Samething once happened to my frnds phone while flashing through odin.
It failed n once restarted same screen came up.
Try restarting yr phone normally once. then wether it puts on or not.
Remove battery insert n press power button n remove it n then put it again and
This time try to enter download mode n then follow dr.ketan method of flashing stock rom via pc odin as it is told.
I hope yr phone will get back n pass the flashing.

shabhrish said:
Looking at the image as per my knowledge its only failed to flash firmware n its lik half dobe.
Samething once happened to my frnds phone while flashing through odin.
It failed n once restarted same screen came up.
Try restarting yr phone normally once. then wether it puts on or not.
Remove battery insert n press power button n remove it n then put it again and
This time try to enter download mode n then follow dr.ketan method of flashing stock rom via pc odin as it is told.
I hope yr phone will get back n pass the flashing.
Click to expand...
Click to collapse
Thanks, I hope you're right.
I'm in middle of flashing the stock ROM. I just wonder how long should it take? It's about 20 minutes it's stuck on flashing factoryfs,img!

NoobSibot said:
Thanks, I hope you're right.
I'm in middle of flashing the stock ROM. I just wonder how long should it take? It's about 20 minutes it's stuck on flashing factoryfs,img!
Click to expand...
Click to collapse
Superbrick symptoms I'm afraid, it should eventually display failed at factory.fs.
Sent from my GT-N7000 using xda premium

I hope you're wrong in this case.
I'm gonna wait and see what happens.

SpyderTracks said:
Superbrick symptoms I'm afraid, it should eventually display failed at factory.fs.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I guess you were right. It's not progressing any further.
Any tip to identify the kind of brick? Is it the emmc brick everyone's been talking about?

NoobSibot said:
I guess you were right. It's not progressing any further.
Any tip to identify the kind of brick? Is it the emmc brick everyone's been talking about?
Click to expand...
Click to collapse
Since you find it too difficult to deal with the who pit thread then there are two options below"
1. if can get warranty, try to seek help from SS
2. If not should try to flash this custom pit file, together with GB rom. Then restart in recovery, format cache, data (same as factory reset) and usbstorage (internal sdcard). This PIT will repartition (make sure repartition is ticked in odin) emmc and you will lose about 3gb internal sdcard.
http://www.mediafire.com/?k518ec21a1qmd9j
see how it goes.

forest1971 said:
Sine you find it too difficult to deal with the who pit thread then there are two options below"
1. if can get warranty, try to seek help from SS
2. If not should try to flash this custom pit file, together with GB rom. Then restart in recovery, format cache, data (same as factory reset) and usbstorage (internal sdcard). This PIT will repartition (make sure repartition is ticked in odin) emmc and you will lose about 3gb internal sdcard.
http://www.mediafire.com/?c8jbi7qmrf7u4d9
see how it goes.
Click to expand...
Click to collapse
Thanks forest, I was skimming you're thread on reviving emmc bricked devices and I must say that I'm not unfamiliar with command line as I am a Linuxer.
I will try the PIT file and I hope it works cause I don't really have time to meddle with partitions manually.

factoryfs. img
NoobSibot said:
Thanks, I hope you're right.
I'm in middle of flashing the stock ROM. I just wonder how long should it take? It's about 20 minutes it's stuck on flashing factoryfs,img!
Click to expand...
Click to collapse
Flashing stock shd not take more than 4 to 5mins or on lower pc configurations upto max 10mins.
I think if yr failing means.
Plz contact dr.ketan. Pm him.
He is d right person to help u.
Pm him from first step so he could give u properly.

[Q] Only Download Mode

About Month ago, I installed Kitkat Mod, working normally, (some little bugs. e.g Phone name I9070 replaced I9070P - My phone is I9070)
I had rooted also... well... yesterday, suddenly phone hang up, I restarted phone and voila! It began to boot up by flashing the normal samsung galaxy s advance screen, but it continually flashes over and over and wont start. I tried everithig - custom rom, stock rom (may be same), f**king room, everithing tried many times, but it continually flashes sumsung logo again... and it goes only download mode... (using Vol down+Home+Power) Vol Up+Home+Power not working to go in recovery mode... also wont work "vol up+down and plug in" (i searched and founded it in google). this is my problem... please help me anybody... what can I do?
---
my english is like my phone' condition... sorry about it...

Did you try it to flash stock Jelly Bean?
If you can enter ONLY in download mode, that is the single solution, before Service Center.

R_a_z_v_a_n said:
Did you try it to flash stock Jelly Bean?
If you can enter ONLY in download mode, that is the single solution, before Service Center.
Click to expand...
Click to collapse
Thanks for Reply... Tried already... but... :/
and... in my country Service Center is **** :/

nutuprofe said:
Thanks for Reply... Tried already... but... :/
and... in my country Service Center is **** :/
Click to expand...
Click to collapse
I had this problem too when i installed first time cm 11.But i used ODIN to go back.Sometimes,for me phone dont boot first time after i restored stock jb with ODIN (but i was able to go in recovery),and i restored again and it booted.Btw,if dont boot first time,but recovery is working,then go in recovery and flash something,as i think you dont want stock jb.Dont go to Service Center yet.Be calm and follow guide to flash stock jb with ODIN.

Force said:
I had this problem too when i installed first time cm 11.But i used ODIN to go back.Sometimes,for me phone dont boot first time after i restored stock jb with ODIN (but i was able to go in recovery),and i restored again and it booted.Btw,if dont boot first time,but recovery is working,then go in recovery and flash something,as i think you dont want stock jb.Dont go to Service Center yet.Be calm and follow guide to flash stock jb with ODIN.
Click to expand...
Click to collapse
thanks for help...
I'm using oding too... many times installed many rooms, i installed rom what i had before and working properly but dont boot again...
I dont know what i can to do again... i think , tried everything
what do you think, what can i do now?

nutuprofe said:
thanks for help...
I'm using oding too... many times installed many rooms, i installed rom what i had before and working properly but dont boot again...
I dont know what i can to do again... i think , tried everything
what do you think, what can i do now?
Click to expand...
Click to collapse
Try to flash stock jb 4.1.2 two times,one by one and be sure that you follow guide correctly.Also,you are sure that your s advance is GT-I9070 and not GT-I9070P?

Force said:
Try to flash stock jb 4.1.2 two times,one by one and be sure that you follow guide correctly.Also,you are sure that your s advance is GT-I9070 and not GT-I9070P?
Click to expand...
Click to collapse
okay I'll try again...
yeah, I'm absolute shure, my is GT-I9070...
Thanks... I'll try and post results

nutuprofe said:
okay I'll try again...
yeah, I'm absolute shure, my is GT-I9070...
Thanks... I'll try and post results
Click to expand...
Click to collapse
Im waiting for your answer.

aaaaah... no results... :/ i'd tried and tried but after downloading and restarting logo apears and dont load :/ again this F**king issue
I download official firmware for my phone but no result

nutuprofe said:
aaaaah... no results... :/ i'd tried and tried but after downloading and restarting logo apears and dont load :/ again this F**king issue
I download official firmware for my phone but no result
Click to expand...
Click to collapse
Flash stock JB firmware, after installation is finished go to recovery mode and do factory reset.
It happen to me too when I do not do factory reset, get stuck on Samsung boot animation.

shut_down said:
Flash stock JB firmware, after installation is finished go to recovery mode and do factory reset.
It happen to me too when I do not do factory reset, get stuck on Samsung boot animation.
Click to expand...
Click to collapse
when i flashing stock JB firmware, after downloading done and phone restarting boot loop and i cant go to recovery mode...

nutuprofe said:
when i flashing stock JB firmware, after downloading done and phone restarting boot loop and i cant go to recovery mode...
Click to expand...
Click to collapse
Write filename of that firmware that you use. Whole filename, like I9070XXLQB_I9070OXXLQB_HOME.tar.md5

shut_down said:
Write filename of that firmware that you use. Whole filename, like I9070XXLQB_I9070OXXLQB_HOME.tar.md5
Click to expand...
Click to collapse
HOME_I9070XXLQ4_I9070SERLQ4.tar.md5

nutuprofe said:
HOME_I9070XXLQ4_I9070SERLQ4.tar.md5
Click to expand...
Click to collapse
I went from XXLQ4 to this that I use now. You will not have a problem by using this version.
http://d-h.st/36o
Download and try with it. So your volume up key is fine? When you get in download mode you hit it to enter in it?
And after installation in Odin - it goes to recovery to finish installation? Do you see that Android with open stomach?
Similar to this, maybe it is on the other side...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

shut_down said:
I went from XXLQ4 to this that I use now. You will not have a problem by using this version.
http://d-h.st/36o
Download and try with it. So your volume up key is fine? When you get in download mode you hit it to enter in it?
And after installation in Odin - it goes to recovery to finish installation? Do you see that Android with open stomach?
Similar to this, maybe it is on the other side...
Click to expand...
Click to collapse
okay, i'll download it and will try now... my VolUp is working well
after instalation, phone restarting (because I have checked auto reboot in odin) restarting and after showing samsung logo nothin' goin' on
(if I have unckecked auto reboot and i manualy rebot phone same happened)
i cant see android with open stomach, because, I cant to go in recovery mode..
i'll try and post here results

shut_down said:
I went from XXLQ4 to this that I use now. You will not have a problem by using this version.
http://d-h.st/36o
Download and try with it. So your volume up key is fine? When you get in download mode you hit it to enter in it?
And after installation in Odin - it goes to recovery to finish installation? Do you see that Android with open stomach?
Similar to this, maybe it is on the other side...
Click to expand...
Click to collapse
If he still cant boot / go in recovery with firmware which you gave him, is possible to extract stock jb (.tar),put cocore kernel (version with recovery) then make it .tar again and flash in odin? I think will work and he will be able to go in recovery.

Force said:
If he still cant boot / go in recovery with firmware which you gave him, is possible to extract stock jb (.tar),put cocore kernel (version with recovery) then make it .tar again and flash in odin? I think will work and he will be able to go in recovery.
Click to expand...
Click to collapse
Yes, but it will increase binary counter. If he has warranty. Sounds like there is something wrong with kernel partition... Installation does not go to recovery after finishing steps in Download mode.
Послато са GT-I9070 уз помоћ Тапатока

shut_down said:
Yes, but it will increase binary counter. If he has warranty. Sounds like there is something wrong with kernel partition... Installation does not go to recovery after finishing steps in Download mode.
Послато са GT-I9070 уз помоћ Тапатока
Click to expand...
Click to collapse
He will can reset binary counter,then it have warranty again Can you do what i said in my previous post? I dont have access to my pc right now...
@nutuprofe : i tell you again,dont give your phone to Service Center,as i think you can solve it. And what version of ODIN you use?

Force said:
He will can reset binary counter,then it have warranty again Can you do what i said in my previous post? I dont have access to my pc right now...
@nutuprofe : i tell you again,dont give your phone to Service Center,as i think you can solve it. And what version of ODIN you use?
Click to expand...
Click to collapse
I found some previous version of CoCore for JB (can't remember version) I made before. @nutuprofe can try with it. But again, if it fails - he can't reset binary counter if he can't boot...

thanks guys for help... i'll try again
my odin version is 3.07... but when i was at work, in my work pc i had 1.3 & 1.7 versions and i tried here too and no result... odin isnt problem...
 @shut_down - i never give my phone to Service Center, as i think i can solve it and if i cant, service center cant too because i know our service center opportunity (may be it right word )