Hey guys,i have a situation here..when ever i coonect my phone to PC ,USB storage isnt getting detected nor the phone is getting charged
ive been experiencing this from past 12 hrs..the battery charges randomly but the USB storage is not detected.
I have kies installed,usb debugging is ON(ive tried switching it off) and im on LSA ROM!
any help would be appreciated!h:fingers-crossed:
Might be a problem with your usb cable
Try changing cable or check for dirt in the port. Clean gently and retry.
yeaha! thanks mate..it worked !
Related
recently in the last few days ive been having problems with my phone .
when plugging in the usb lead from pc to transfer files ,the computer doesnt detect the phone correctly and i get a usb error . tried hard reset etc no difference .
wifes phone connects perfectly . using darkys 7.6 rom on both phones
when i remove the usb cable the phone still indicates that its charging and will continue to do so until i remove battery and restart phone .
the phone detects the cable as it does the indicator bleep ,but i get no mass storage notification.
just hoping the usb connector isnt damaged internally ,doesnt feel loose and the phone is looked after also its the 16 gb version which arent available anymore.
First of all, excuse my poor English.
Yesterday I went to charge my SGS +, but the phone don't want charge.
I tested 2 wall chargers and official USB cable.
a) With the phone turned off and the battery attached, when I connect the cable (Wall or USB), I can't see the big picture of the battery charging. The phone start and restart when home screen appears.
In this case, while cable is connected, if I goto CWM Recovery and then remove battery, I can use CWM as normal.
b) If I remove the battery and connect the any charger (Wall or USB), the phone don't start.
I have searched the forum but can not find anything about that.
Thanks in advance.
, it only charge when go to Download Mode.
In CWM recovery mode it don't charge.
With running phone, it don't charge and if I use a USB Cable, I can't see its drives (internal or external);. I tried this last in 2 differents pc
In battery stats window, it says that I need connect a usb charger.
I try 2 different batteries and 2 wall chargers and 2 USB cables.
I dit a hard reset, reinstall again CM9 Alpha 4 (until 19 Jun it works fine).
I did a dissasemble of the phone to see if any pin of the micro-usb port is broken, but I see all fine
Re
Hi
This a very common issue with the Galaxy S2, never heard about it for SGS+ but you can never know.
The USB connector on your phone is responsible for this problem. It doesn't have anything to do with the battery or the ROM.
Samsung says it's because of moisture that got inside the socket. For SGS2 the problem is fixed by changing this component.
Hope it helps
Hi sorel22,
Thank you for reply. I'll try replace it. Is very strange that it works only in Download Mode
More tests: Yesterday I installed broodROM business from http://forum.xda-developers.com/showthread.php?t=1696381.
All works ok USB charging, browsing on Windows on both drives (internal/external).
Again, I reinstalled CM9 alpha 4 and, again, I get the USB problems (USB charge only in Download Mode, and I can't browse int/ext drives)
So, I reinstalled broodROM again and all is working 100%.
And yes, I did all with wiped factory/data/cache/dalvik.
I want to thank broodplank1337 for creating this great rom
onumad said:
More tests: Yesterday I installed broodROM business from http://forum.xda-developers.com/showthread.php?t=1696381.
All works ok USB charging, browsing on Windows on both drives (internal/external).
Again, I reinstalled CM9 alpha 4 and, again, I get the USB problems (USB charge only in Download Mode, and I can't browse int/ext drives)
So, I reinstalled broodROM again and all is working 100%.
And yes, I did all with wiped factory/data/cache/dalvik.
I want to thank broodplank1337 for creating this great rom
Click to expand...
Click to collapse
You can try the gigabread+ its better than business. Its my opinion.
Sent from my GT-I9001
Thank you, I'll try it now.
GIGABREAD is based on 2.3.6 XXKQB and BUSINESS on 2.3.6 XXKQE.
What is changes? I can only find a WIFI issue solved, but I haven't issues with XXKQB?
Has this happened to anyone else?
Whenever I connect my phone to a computer with the usb cable, the device plugged-device unplugged sounds start playing in rapid succession and of course I can't see the phone's storage.
Does anyone know how to fix this? phone was working well yesterday
It was a faulty cable, thanks for your help guys :silly:
Well this problem drives me crazy.
My phone (i9070) doesn't make any sound when I plug it on my computer or charger and no charging indication appears either on the phone.
On computer side device appears under the storage devices.
However is seems that the power connection is working since if I restart the phone while the power plug is still connected the charging indicator appears. In addition after the restart the battery seems to reach 100% extremely soon (which is not normal at all). Unplugging the charger (or the computer) doesnt detected either by phone, the charging indicator is still active until restart.
I tried to factory reset the device and still "no juice".
I have tried 3 different cables with two computers where the device was connected few days ago without any problem.
I don't know what should I suspect.
Faulty battery? Faulty data connection on phone plug? OS based issue?
Any ideas?
limbo666 said:
Well this problem drives me crazy.
My phone (i9070) doesn't make any sound when I plug it on my computer or charger and no charging indication appears either on the phone.
On computer side device appears under the storage devices.
However is seems that the power connection is working since if I restart the phone while the power plug is still connected the charging indicator appears. In addition after the restart the battery seems to reach 100% extremely soon (which is not normal at all). Unplugging the charger (or the computer) doesnt detected either by phone, the charging indicator is still active until restart.
I tried to factory reset the device and still "no juice".
I have tried 3 different cables with two computers where the device was connected few days ago without any problem.
I don't know what should I suspect.
Faulty battery? Faulty data connection on phone plug? OS based issue?
Any ideas?
Click to expand...
Click to collapse
What ROM and what kernel you are using?
Sent from my GT-I9070 using Tapatalk
Sorry forgot to mention these info:
Kernel
3.0.31-CoCore-EP-8.2
Updated to 8.2 after the problems I had CoCore 8.0 until the problem appeared.
ROM
LightJB v1.2
I used to work with JellyMod v4.0 until the problem appeared and I switched to LIghtJB v1.2 to test if the problem fixed but the same behavior here.
Should I replace my battery?
Is there any way to check if the USB connection gets detected by the phone hardware (a diagnostic procedure)?
limbo666 said:
Sorry forgot to mention these info:
Kernel
3.0.31-CoCore-EP-8.2
Updated to 8.2 after the problems I had CoCore 8.0 until the problem appeared.
ROM
LightJB v1.2
I used to work with JellyMod v4.0 until the problem appeared and I switched to LIghtJB v1.2 to test if the problem fixed but the same behavior here.
Should I replace my battery?
Is there any way to check if the USB connection gets detected by the phone hardware (a diagnostic procedure)?
Click to expand...
Click to collapse
Put the phone in download mode, connect to PC via USB cable and open Odin. If the phone connects, I recommend a reflash with one firmware.
mathei said:
Put the phone in download mode, connect to PC via USB cable and open Odin. If the phone connects, I recommend a reflash with one firmware.
Click to expand...
Click to collapse
Device cannot be detected either download mode.
:crying:
Am I doomed?
limbo666 said:
Device cannot be detected either download mode.
:crying:
Am I doomed?
Click to expand...
Click to collapse
Install Samsung USB drivers.
http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
shut_down said:
Install Samsung USB drivers.
http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
Click to expand...
Click to collapse
Drives are already installed.
The phone is not responding on the cable when it is connected to its usb port.
Computer doesn't detect any device either.
Any ideas?
limbo666 said:
Drives are already installed.
The phone is not responding on the cable when it is connected to its usb port.
Computer doesn't detect any device either.
Any ideas?
Click to expand...
Click to collapse
Is it charging? Bad cable? Change USB port on PC, put it in some other.
You said you have charging problems? It is not shown (in phone, procentage is not going up) or it is not charging at all?
Luckily for u it's a broken flex (cheap) it costs $10 including tools to fix it yourself on ebay
Sent from my GT-S5367 using xda app-developers app
Hi All,
I also have the same problem.....
Can anyone help me.....
Hi guys,
recently my wife's phone's USB is not working properly.
When plugged to the charger, it does nothing. When plugged to the computer, neither. When rebooting with the USB cable connected, only then detects and charges. When shutting down the phone, it reboots.
I looked at the connector and it is clean, I don't think it's broken if after rebooting it detects it, so a software problem... but it's only my guess.
I tried with another battery, and with another usb cable, nothing!
I'd make a factory reset, but I fear that this won't solve the problem and we will have to reinstall all the stuff... I don't want to flash a custom recovery to do a backup if not necessary becouse of the binary count and for if I need to take it to the shop...
Do you know what could I try?