Database Develop

[Q] stuck on the samsung logo after update

Hi All,
My galaxy note is stuck on the Samsung logo and just hangs there.
some info on what I did.
My phone has been rooted (this has been done a while now still on stock rom)
I put phone back to factory settings (as wanted to start fresh) all was fine still rooted
I got a pop-up message about a update so I installed the update phone rebooted
Then I got another message about a update think it was kernel file update
phone rebooted
Then I got another message about android 4 so installed this phone rebooted and now it just hangs when it gets to the Samsung logo.
I can get into recovery mode.
Any ideas what I should do?
I have done lots of searches but did not want to make things worse (if possible)
Should I try and flash ICS using Odin3 v1.85?
Or should I just send phone back to Samsung?

Flash a stock Gingerbread Rom using PC Odin.Then,if you want you can update to official ICS without rooting or root GB and flash custom ROMS.

Dont wipe anything from the default kernel CWM, see if your storage can connect to PC, if yes then copy CF kernel 5.6 lq3 and Abyss kernel 4.2 and flash Abyss kernel first and go to advance reboot recovery, then do full wipe, then flash CF kernel 5.6 lq3

Hi Thanks for the replies
I checked and I can go into recovery and access the sd card
I could not find the kernels you mentioned do you have a link to them
also when I have flashed both kernels will I then have to flash a rom?
maybe the ginger bread one like NoRmAlY_CrAzY said
I found this one that am downloading
N7000XXKKA ------ 2.3.6 2011 November------- N7000CPWKK3 -----------United Kingdom (Carphone Warehouse)
Should I flash that?
-------
ok I flashed the ginger bread rom using rom Odin and its working i'll have to root again now i'll have to go read some threads about updating to ICS
Thanks Angie

[Q][SOLVED] How do I flash an other JB ROM if my phone only lets me download mode?

Hi, yes, this is Dog.
No, seriously, today I tried to flash semaphore kernel 2.2 (JB) to my Jelly Bean Port Rom , wich came with Devil's kernel. When the instalation finished the phone rebooted and now it gets stuck with the Semaphore's kernel screen.
Recovery doesn't work.
Download mode DOES work.
I don't know too much about bootloaders and deeper stuff.
So, what shall I do? I just downloaded Tsunami's AOKP JB ROM, but its a .zip and Odin only allows .tar.. And I dont have a nand backup with JB (i have it with ICS)
Help me! please!
SOLVED: Flashed Devil's kernel back with Odin. Then reflashed the rom with CWM.

[Q] How to flash Hydracore via PC Odin

Hello guys,
So I just downloaded the leaked official JB ROM for my N7000 and flashed it successfully via Odin (I came from the latest CM10 Nightly build).
After that I wanted to flash the latest Hydracore to have my phone rooted, but apparently it comes in .zip format only.
Since I'm not rooted and I don't have CWM now, how can I get to flash Hydracore via PC Odin?
Hope someone has the answer for this, as the internet is just full of bullocks all websites are describing the same non working procedure....
Thanks all
//M
Sent from my GT-P6800 using xda app-developers app

latest jb leak does not work with hydracore. If you want to root use philz kernel zip file and install using stock recovery.
Sent from my GT-N7000 using xda premium

Thanks much
will do so... I already flashed Hydracore and now I'm stuck @ Samsung's logo
Hopefully I won't face such issues again
Sent from my GT-P6800 using xda app-developers app

Well, I've downloaded both v3.65 .zip files (XXLSA and XXLS7) and tried flashing them through CWM which was already on the device.
After rebooting either, it goes into a black screen after the initial boot screen (Galaxy Note GT-N7000).
Bear in mind I had already flashed Hydracore before that...
Any helpers as to what I'm doing wrong?
Should I reflash the stock ROM via PC Odin then flash Philz kernel via stock recovery?
Thanks in advance
P.S. I know I messed up big time

As what my friend nokia said. Hydracore is not compatible with jb leaks rom.
I m not so sure which kernel u r now, since u stuck at boot logo.
And I don't want to decide too fast that u have bricked ur phone.
Just try to flash the firmware again through odin. If u can, and can boot up, try to flash philz kernel from stock recovery.
Sent from my GT-N7105, at the corner of this rounded earth.

antique_sonic said:
As what my friend nokia said. Hydracore is not compatible with jb leaks rom.
I m not so sure which kernel u r now, since u stuck at boot logo.
And I don't want to decide too fast that u have bricked ur phone.
Just try to flash the firmware again through odin. If u can, and can boot up, try to flash philz kernel from stock recovery.
Sent from my GT-N7105, at the corner of this rounded earth.
Click to expand...
Click to collapse
That's what I'm thinking and doing now, wish me luck
I've also downloaded xxlsa to have 4.1.2 .. according to online tutorials I should flash cf-root via odin, then flash the rom via CWM .. any thoughts?
[Update - 1] phone is ok, re-flashed the stock firmware via PC Odin and it is working now, no problem! tried flashing cf-root, got stuck at the yellow triangle screen and nothing happens ... so I reflashed the stock rom again.
will try now to flash cf-root then boot into recovery, i just might be lucky
[Update - 2] upgraded to JB 4.1.2 successfully and rooted!

So which kernel are you using? and which Jelly bean?

[Q] HOw to install original rom (CWM) and from where i can get that

by mistakenly i have installed PhilZ-cwm6-XXLSC-XJB-3.75-signed.
How can i remove that and how can i install original cwm for galaxy note GT-N7000.
plz help

shehrozjanjua said:
by mistakenly i have installed PhilZ-cwm6-XXLSC-XJB-3.75-signed.
How can i remove that and how can i install original cwm for galaxy note GT-N7000.
plz help
Click to expand...
Click to collapse
1. There is no such thing as "original cwm"
2. The one that comes with your device is called "Stock Recovery"
3. Now if you want stock recovery you have flash stock rom which in this case would be ICS 4.0.4
4.If you want to change your recovery you have to flash a different kernel as recoveries comes with kernels.
P.S. Dont flash stock ICS 4.0.4 kernel as it is unsafe.
If you want to flash Stock Rom ICS 4.0.4 follow this http://forum.xda-developers.com/showthread.php?t=1424997

XXLSC is a OTA update which one of the forum member (ThaiDai) got on his phone and has dumped for custom roms. XXLSA stock is available on samfirmware.com and it has the stock JB TW kernel,. if you want that... flash it using Odin..

[Q] Need a few instructions fast please

Hello.
I just came from CarbonRom Nightly Build (4.2.2 - XXLSO) and now I wanted to get the stock rom again!
I did the instructions listed here:
http://forum.xda-developers.com/showthread.php?t=1424997
IGNORE
1.b Final Installation
- Download ROM, and extract it to .tar file
- Download Odin, open it
- select PDA tab and point to ROM file. Leave Re-partition, pit, CSC, Phone tab unticked (see Image below)
- Switch off device, Put in download mode (Vol down + Home + Power)
- completely close kies, Anti virus if running
- Connect device to PC
- ID com port shud turn yellow (not shown in image)
Now hit Start
Click to expand...
Click to collapse
i used N7000XXLSZ N7000OXALSZ - Germany.
My Rom history:
GB 2.3.5 (worked!)
OTA 4.0.3 (worked!)
OTA 4.0.4 (worked!)
root with temporary CWM (worked!)
updated on 4.2.1 SuperNexus (hydra kernel) (worked!)
flashed Philz Kernel and 4.1.1 TW dump (worked!)
flashed Philz XXLSZ Kernel and the original OTA update 4.1.2 XXLSZ trough odin (worked!)
flashed CarbonRom 4.2.2 XXLSZ (worked!)
wanted to flash the stock 4.1.2 - didn't work - (soft brick)
friend suggested to first flash a safe kernel again, i think it worked because of the yellow triangle? but i still cant boot in cwm
i still have acces to the download mode but it doesnt boot neither in recovery nor normal boot (boot loop)need instructions please fast!
Click to expand...
Click to collapse
okay i managed to flash an extisting rom i had on my SD card trough CWM.
Its BurtRom LSC now, can I now just flash the original (LSO / LSZ) one trough odin ?

mindfck1337 said:
okay i managed to flash an extisting rom i had on my SD card trough CWM.
Its BurtRom LSC now, can I now just flash the original (LSO / LSZ) one trough odin ?
Click to expand...
Click to collapse
Hi,
Yes, but you probably will get the yellow triangle, you can remove it later tho with "triangle away".
... anyway, you can have the latest stock tw rom versions from Thaidai Pristine's thread or Eybee's stock reloaded via CWM without having to return to those versions you mentioned on Odin... just a suggestion. Hope this helps.