Database Develop

[Q] How do I find out which country my galaxy note is from? Please help?

I recently got my phone back from a jtag repair man who left my phone in donwload mode, and I have no clue which stock rom to flash... what should I do? how can i be sure of the origin of the phone?

minnieman said:
I recently got my phone back from a jtag repair man who left my phone in donwload mode, and I have no clue which stock rom to flash... what should I do? how can i be sure of the origin of the phone?
Click to expand...
Click to collapse
This is what you need to folow..
http://forum.xda-developers.com/showthread.php?t=1424997
Flash gb rom via odin and all done
Sent from my GT-N7000 using XDA Premium App

sahilarora2003 said:
This is what you need to folow..
http://forum.xda-developers.com/showthread.php?t=1424997
Flash gb rom via odin and all done
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
So can I just use the open europe one? I know it's from europe, I just don't know specifically where.

minnieman said:
So can I just use the open europe one? I know it's from europe, I just don't know specifically where.
Click to expand...
Click to collapse
Yea. You can use it.. Just stick with the instructions.
Sent from my GT-N7000 using XDA Premium App

sahilarora2003 said:
Yea. You can use it.. Just stick with the instructions.
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
Ok, I did what you said, now it just goes to 'logo_ql.jpg' draw failed. It also wont let me get back into download mode, it just goes to this message. now what?
EDIT, nevermind, got it into download mode... guess i just need to keep trying different roms to figure out which one works?

You said your note came from repair and it was on download mode. I think it was NOT REPAIRED AT ALL. Country or region has nothing to do with manual flashing. You only need region when using kies to update.
Sent from my GT-N7000 using xda app-developers app

minnieman said:
Ok, I did what you said, now it just goes to 'logo_ql.jpg' draw failed. It also wont let me get back into download mode, it just goes to this message. now what?
EDIT, nevermind, got it into download mode... guess i just need to keep trying different roms to figure out which one works?
Click to expand...
Click to collapse
Tbere is no need to try different roms as every rom is like same. Not much difference. Maybe your device is hard bricked and writing isn't possible. Get your motherboard replaced.
Sent from my GT-N7000 using XDA Premium App

sahilarora2003 said:
Tbere is no need to try different roms as every rom is like same. Not much difference. Maybe your device is hard bricked and writing isn't possible. Get your motherboard replaced.
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
I did get it working... however, I went to reflash because when I did a factory data reset in CWM and it hung at erasing the data. So I reflashed the same way and now it gets stuck at the splash screen but it does boot, just not all the way up. what do I do?
EDIT: nevermind! got it! just had to use the stock recovery to wipe the data partitiopn and now my note is working great! thanks for your guys help!!

minnieman said:
I did get it working... however, I went to reflash because when I did a factory data reset in CWM and it hung at erasing the data. So I reflashed the same way and now it gets stuck at the splash screen but it does boot, just not all the way up. what do I do?
EDIT: nevermind! got it! just had to use the stock recovery to wipe the data partitiopn and now my note is working great! thanks for your guys help!!
Click to expand...
Click to collapse
Don't ever wipe using stock ICS kernel. It will hard brick your device. I think now already got affected. Flash a safe kernel first then wipe.
Sent from my GT-N7000 using XDA Premium App

So I have a question. I had tried rooting my device and it failed into a soft brick. Previously I had jzo54k on there. Using Odin I installed the Poland software but it seemed to have failed because now I am not able to register on a network. I have an international version of the Note 2 that I am using in the US. Since I am not able to connect to a network I am lost as to what to try. Any suggestions on where to go from here?
---------- Post added at 01:22 AM ---------- Previous post was at 12:40 AM ----------
GeoJam3s said:
So I have a question. I had tried rooting my device and it failed into a soft brick. Previously I had jzo54k on there. Using Odin I installed the Poland software but it seemed to have failed because now I am not able to register on a network. I have an international version of the Note 2 that I am using in the US. Since I am not able to connect to a network I am lost as to what to try. Any suggestions on where to go from here?
Click to expand...
Click to collapse
Never mind... I got it. I had to update only via Kies. And then from there it pushed my original software. Thanks!

Stuck on Splash Screen. No recovery. Odin not able to flash roms.
sahilarora2003 said:
Don't ever wipe using stock ICS kernel. It will hard brick your device. I think now already got affected. Flash a safe kernel first then wipe.
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
Hi
My stock JB official unrooted rom suddenly went to a bootloop. I looked up online for solutions and flashed an official JB ROM for my phone and Odin failed to flash it. I tried Philz recovery but Odin failed to flash it. I got a yellow triangle which I was able to removie through Odin. Currently my phone is stuck on the splash screen. Recovery doesn't work. Odin fails when I try to reflash with a md5.tar file. Please experts help me with my problem. would really appreciate it.
Thanks in advance.

GT-P7300 Stuck on Loading...

I used Odin to download, but now the Tab is stuck as it just keeps saying loading...
I tried disconnecting the battery, but that didn't work.
Any ideas?
Thanks!

Golf Educator said:
I used Odin to download, but now the Tab is stuck as it just keeps saying loading...
I tried disconnecting the battery, but that didn't work.
Any ideas?
Thanks!
Click to expand...
Click to collapse
What did you try to download and do you have a custom recovery installed, twrp or cwm? With whatever recovery you have try doing a factory reset and wipes.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app

jd1639 said:
What did you try to download and do you have a custom recovery installed, twrp or cwm? With whatever recovery you have try doing a factory reset and wipes.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
Thanks for answering...
I believe I was trying to download a new CWM with odin. I'm not sure how to use a factory reset and wipes as I can't use anything on the GT, as it is stuck. As this point I am hoping that the new IC firmware will be available through Kies.
I can still use Odin from the PC through Kies, though.
Thanks again!
Regards,
Golf Educator: confused:

Does Odin recognize your device? If so you can flash the stock rom from sammobile.com. You need to extract the .tar.md5 file from the zip. Use 7-zip to do that
Sent from my SAMSUNG-SGH-I957 using xda app-developers app

jd1639 said:
Does Odin recognize your device? If so you can flash the stock rom from sammobile.com. You need to extract the .tar.md5 file from the zip. Use 7-zip to do that
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
Again, thanks for responding...
At this point I'm afraid of "Bricking it" before I can have a chance to update the firmware to IC. Hopefully that will be soon.
I really don't know what I am doing, and I have already screwed it up. The GT Honey Comb is working fine, but I can't do anything to upgrade it, internally, as everything is stuck within the GT!
At one point I was trying to upgrade to Jelly Bean, but now I'm just hoping to just get IC. If I can get the IC downloaded through Kies, I'm thinking that the new firmware upgrade using Kies will take care of things. What do you think?
I guess I can live without Jelly Bean.
But I'm willing to give something else a try, however, I would need detailed, step-by-step "For Dummies" directions on what I should do; and as kind as you are, I wouldn't want to ask you to do that?
Kind regards,
Golf Educator

Hi. Don't be scared of losing your device. Will try to walked you thru the process.. just to be more clearer. Can you write down all your device info such as current firmware that u r using? And also do tell us the region ( im XME -Malaysia) because sometimes not all the stock rom can be use to upgrade..
You may need :-
1- kies(for drivers)
2- cables
3- charge your tab to 80%
4- windows/os of ur pc or Mac
After you post all of the info. I or we will try our best to walk you thru the process
Sent from my GT-I9000 using xda app-developers app

BlackCl0udMY said:
Hi. Don't be scared of losing your device. Will try to walked you thru the process.. just to be more clearer. Can you write down all your device info such as current firmware that u r using? And also do tell us the region ( im XME -Malaysia) because sometimes not all the stock rom can be use to upgrade..
You may need :-
1- kies(for drivers)
2- cables
3- charge your tab to 80%
4- windows/os of ur pc or Mac
After you post all of the info. I or we will try our best to walk you thru the process
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Okay, here we go... let's shoot for Jelly Bean!
Model number: GT-p7300, that has wifi with G3, European Version, as I work with the US military at RAF Lakenheath, England, and bought it locally. I am in the London world-time zone. Five hours earlier than EST.
Android version: 3.2
Baseband version: P7300xxkj6
Kernel version: 2.6.36.3 (Original when I bought it, however i did root it) [email protected] #1 SMP PREEMPT Fri Dec 23 13:54:01 KST 2011
Build number: HTJ85B P7300XWKL4
I'm using a PC HP Pavilion with Windows 7 with Odin 3v1.85 that does turn yellow when used.
The Kies on my GT works, but the Kies on my PC for some reason doesn't recognize the GT. I believe the Kies drivers are loaded, ok.
I am using the original Samsonite Cable.
Now you know more about me than my wife does...
Thanks,
Golf Educator :fingers-crossed:

Sorry for all the questions, but it's hard to diagnose all the problems from a distance. It sounds like when you tried to flash cwm something messed up the tab. But if it still turns on you can probably get it to work again. Kies is a crapy program so I always use Odin. When you plug the tab into Odin does the com in Odin turn yellow and show the port?
Sent from my SAMSUNG-SGH-I957 using xda app-developers app

jd1639 said:
Sorry for all the questions, but it's hard to diagnose all the problems from a distance. It sounds like when you tried to flash cwm something messed up the tab. But if it still turns on you can probably get it to work again. Kies is a crapy program so I always use Odin. When you plug the tab into Odin does the com in Odin turn yellow and show the port?
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
No problem with the questions... appreciate you taking time to help!
I use Odin 3v1.85 with the correct Samsonite cable. It does turn yellow. I don't know if it shows the port. I haven't toyed with it again as I didn't want to lose the use of the GT to be able to update the new IC firmware that is on the way for this GT-P7300 with wifi and G3, European model.
Regards,
Golf Educator

Ok, that's good, Odin is working and now we can get you up and running. Let's try on thing first, can you to recovery mode? Hold the power button and volume up button down, when the tab responds let go of the power button but still.Hold the volume up, then a second later let go of the volume. This should bring you to a menu where you can do some wipes and a factory reset. (I don't remember exactly what's there) IF you can d o wipes try that first. If that doesn't work then try the factory reset (do you have any data and pictures,etc you wantbacked up?)
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
---------- Post added at 06:56 AM ---------- Previous post was at 06:50 AM ----------
One more question, what country are you in?
Sent from my SAMSUNG-SGH-I957 using xda app-developers app

jd1639 said:
Ok, that's good, Odin is working and now we can get you up and running. Let's try on thing first, can you to recovery mode? Hold the power button and volume up button down, when the tab responds let go of the power button but still.Hold the volume up, then a second later let go of the volume. This should bring you to a menu where you can do some wipes and a factory reset. (I don't remember exactly what's there) IF you can d o wipes try that first. If that doesn't work then try the factory reset (do you have any data and pictures,etc you wantbacked up?)
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
---------- Post added at 06:56 AM ---------- Previous post was at 06:50 AM ----------
One more question, what country are you in?
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
Hi,
I'm in the United Kingdom and bought the GT in England... It is the GT-P7300 with wifi and 3G. The IC hasn't been released for the United Kingdom, yet, but it should be out in a few days.
I also think that my Odin is working... but the Recovery Mode is the internal problem that I mentioned with the GT. That is where it is stuck saying that it is loading (but it is not loading). At this point my problem is because of that I can't get to anything and can't do anything in the Recovery Mode with it stuck in that frozen loading effort... including wipes, factory resets, etc., it just keeps on saying that it is loading!
Thanks, again, I appreciate your interest and effort!

Are you trying to use cwm 5.5.0.4 that's in the 8.9 development forum stickies? I would 're-download the .tar version again and try to reflash it with odin. You'll load it in the PDA section and only have the auto-reboot and f.reset checked. Don't have anything else checked. Your first attempt could have been a bad download of cmw.
If you're currently rooted then will have to do something different in order to get the OTA ics when it comes out. I just got it for my tab a few days ago. You'll like it much better than hc.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app

jd1639 said:
Are you trying to use cwm 5.5.0.4 that's in the 8.9 development forum stickies? I would 're-download the .tar version again and try to reflash it with odin. You'll load it in the PDA section and only have the auto-reboot and f.reset checked. Don't have anything else checked. Your first attempt could have been a bad download of cmw.
If you're currently rooted then will have to do something different in order to get the OTA ics when it comes out. I just got it for my tab a few days ago. You'll like it much better than hc.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
OK! I think I've made some progress...
I was able to get clockworkMod_Recovery_v5.5.0.4.tar from androidjinn.com. I was also able to get a connection from Odin as it turned yellow. I loaded the PDA with the .tar as you suggested, and started it. It passed! Now I have a CWM that works. Afterwards, using it I did a Factory Reset.
Now, I have a newly installed hc and a working CWM. But, would you believe that the Downloading Mode is still stuck on loading. Do you think when we flash a new ROM that it will reset the reloading correctly?
I feel pretty proud of myself! I think I am ready for Jelly Bean...
How do I do that?

Sounds great. I've been running jb for quite a while, but frankly I'd wait for the ics. Runs just as good and it's stock. Never thought I'd say that until I tried it.
Sent from my SGH-I727 using xda app-developers app

jd1639 said:
Sounds great. I've been running jb for quite a while, but frankly I'd wait for the ics. Runs just as good and it's stock. Never thought I'd say that until I tried it.
Sent from my SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Two questions:
Which system will enable the GT to be used as a phone?
How do I root my newly factory reset hc so my aps work?
Thanks

I have an i957 tab which is different than yours so I don't have an answer to your second question. To root your device see the stickies in the tab 8.9 development section it should be as easy as flashing a zip file thru your recovery. Make sure you get the right zip for your specific device though. Otherwise you can brick it. The biggest mistake people make its using a file for a similar device rather than one for their specific device.
Sent from my SGH-I727 using xda app-developers app

Nice
Golf Educator said:
OK! I think I've made some progress...
I feel pretty proud of myself! I think I am ready for Jelly Bean...
How do I do that?
Click to expand...
Click to collapse
Good work so far! Now you just need to download the rom (.zip file) and gapps (also a .zip) for the rom you want to use. Put those on the sd card of your tablet. To do this you may have to "mount external storage" in the cwm menus. Once you get those on there, do a full wipe, and then install the rom and gapps. That should do it for you.

To be honest, p7300 can only make calls via root and using cm9 custom rom. Will try to help you mate!! Sorry for late reply..
But just to make it easier, the 1st step is to use stock 2.3.6 that can be installed CWM 5, after getting that. You must download the custom cm9 rom and install into your internal memory(as i can recall all cm based rom will update your cwm 5 to 6 in the process). Will give you the link and try to resolve your probs!!
This is what you will need :-
Download Gt p7300 XEU stock 2.3.x ROM(search via filecorp)
Odin
Pits file
(all this is just in case that you need to flash it back to stock)
Will update my post in a short period of time!
Regard
BlackCl0udMY
Malaysia

Note to gulf educator: if your going to install a custom Rom, cm9 etc., you don't need to root first.
Sent from my SGH-I727 using xda app-developers app

upconvert said:
Good work so far! Now you just need to download the rom (.zip file) and gapps (also a .zip) for the rom you want to use. Put those on the sd card of your tablet. To do this you may have to "mount external storage" in the cwm menus. Once you get those on there, do a full wipe, and then install the rom and gapps. That should do it for you.
Click to expand...
Click to collapse
How do you mount external storage?
Thanks

[WARNING] I957 ICS Touchscreen Issues after Odin Flash

This has the potential to become a major issue.
I figured instead of two separate threads, the discussion can be consolidated here.
Existing threads:
http://forum.xda-developers.com/showthread.php?t=2069823
http://forum.xda-developers.com/showthread.php?t=2071206
This has happened to 3 people so far. I know there are many users who have successfully updated to ICS via Odin, but if more and more people have touchscreen issues I am going to take the thread down.
Some information to provide:
Was KIES used?
Version of Odin used?
What ROM was it being flashed from
What ICS ROM was loaded (course from sammobile or hotfile, etc.)
What Recovery was used?
Also please run a logcat through ADB to see if any errors occur during boot when the touchscreen does not work.
Hopefully someone like dan-htc or nrvate has some knowledge to share as well.

Thanks Orlando for putting this all in one place.

I'm one of the affected users.
Was KIES used? Yes. I used Kies for the initial update which completed successfully. TS worked before, not after.
Version of Odin used? I have tried at least 10 times after the initial Kies update with Odin 1.85. Each time completeing without error but TS still does not work
What ROM was it being flashed from? All I know is that I was on the stock ROM from when I bought the device Dec12 from AT&T. 3.2?
What ICS ROM was loaded (course from sammobile or hotfile, etc.) Sammobile downloads which link to hotfile. I have tried each (there are only 2) at least 5 times
What Recovery was used? I use the stock recovery, nothing non-stock has been done to my device.
Also please run a logcat through ADB to see if any errors occur during boot when the touchscreen does not work. I am not familiar with how to do this but if you post some steps I will do it tonight and post results, no problem.
Ill also add that after it boots up I am able to plug it into my laptop and see it in both Kies and my computer. I can drop files onto the sdcard.

I don't understand how a new Rom can break the touchscreen and reverting back doesn't fix it.
Sent from my SAMSUNG-SGH-I727 using xda premium

orlandoxpolice said:
I don't understand how a new Rom can break the touchscreen and reverting back doesn't fix it.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
I don't know, but that's exactly what happened. I was using it right up until the point I plugged it into Kies and perfomed the update.
Thanks

EraserX33 said:
I don't know, but that's exactly what happened. I was using it right up until the point I plugged it into Kies and perfomed the update.
Thanks
Click to expand...
Click to collapse
it just doesn't make sense to me. it has to be a software issue and not a hardware issue

I'm one of the affected users.
Was KIES used? No. Kies didn't detect my tab initially, Then used Odin; TS worked before, not after.
Version of Odin used? Version 1.85
What ROM was it being flashed from? AT&T Stock 3.2
What ICS ROM was loaded (course from sammobile or hotfile, etc.) Sammobile downloads which link to hotfile. I have tried each (there are only 2) as well as the "Default (XXX)" Carrier. Tried afterwards CM10 and AOKP unofficial but both showed the samsung boot, then a blank black screen with backlight on
What Recovery was used? None for the intial load, then Flash CWM 5.5, TWRP also had no Touch working, then back to stock
Also please run a logcat through ADB to see if any errors occur during boot when the touchscreen does not work. Will do and post back in here later tonight hopefully
My device is still not detcted Via Kies but i can read and write now normally to the SDCard via cable from Windows and Ubuntu

Wamaonline, were you able to successfully flash the roms, cm10, stock, etc., with odin? And you only had auto-reboot and f.reset checked and Rom in PDA?
Sent from my SAMSUNG-SGH-I957 using xda app-developers app

jd1639 said:
Wamaonline, were you able to successfully flash the roms, cm10, stock, etc., with odin? And you only had auto-reboot and f.reset checked and Rom in PDA?
Sent from my SAMSUNG-SGH-I957 using xda app-developers app
Click to expand...
Click to collapse
yes, all was green for flashing Stock. flashed CWM 5.5 using ODIN, then moved files for CM10, AOKP and GAPPS to sdcard, and flashed them using CWM
Even tried a custom kernel from the forums here using CWM.
Finally went back to stock HC Rom, but no updates so far.
And both ROMs didn't really complete a boot !

Custom kernel will only work for hc roms
Sent from my SAMSUNG-SGH-I727 using xda premium

orlandoxpolice said:
Custom kernel will only work for hc roms
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
You think that may work ? am currently on stock HC, will flashing the kernel once again make any difference ?

wamaOnline said:
You think that may work ? am currently on stock HC, will flashing the kernel once again make any difference ?
Click to expand...
Click to collapse
Flashed the custom kernel, and still same problem
---------- Post added at 02:39 AM ---------- Previous post was at 02:32 AM ----------
wamaOnline said:
Flashed the custom kernel, and still same problem
Click to expand...
Click to collapse
Flashed contingency ROM , still the same result. Don't currently have adb at hand, Will the show log output from CWM be if any help ?
all i have now is
"failed to open /sys/class/android_usb/android0/state: No such file or directory"

wamaOnline said:
Flashed the custom kernel, and still same problem
---------- Post added at 02:39 AM ---------- Previous post was at 02:32 AM ----------
Flashed contingency ROM , still the same result. Don't currently have adb at hand, Will the show log output from CWM be if any help ?
all i have now is
"failed to open /sys/class/android_usb/android0/state: No such file or directory"
Click to expand...
Click to collapse
it may be worth a try to format the entire tablet, and then flashing a rom. that means formatting everything in CWM.

Anyone know what these guys did? Any of them resolve the issue? Not sure if it could be related in anyway.
http://forum.xda-developers.com/showthread.php?t=1523254

Interesting, I wonder if it's a cwm issue? Have you tried twrp? Orlandos official ATT ics thread in the development section had a link to it. It's what I use. You'll need to flash it thru odin. Might be worth a try.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

it REALLY worries me that even a nandroid backup wont restore the touchscreen. it is almost if flashing causes hardware damage.

jd1639 said:
Interesting, I wonder if it's a cwm issue? Have you tried twrp? Orlandos official ATT ics thread in the development section had a link to it. It's what I use. You'll need to flash it thru odin. Might be worth a try.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Thanks, Tried it, but touch screen didn't work there either
orlandoxpolice said:
it may be worth a try to format the entire tablet, and then flashing a rom. that means formatting everything in CWM.
Click to expand...
Click to collapse
Did format everything before then flash stock ROM, but the same problem
Sent from my A500 using xda app-developers app
---------- Post added at 09:22 AM ---------- Previous post was at 09:20 AM ----------
orlandoxpolice said:
it REALLY worries me that even a nandroid backup wont restore the touchscreen. it is almost if flashing causes hardware damage.
Click to expand...
Click to collapse
Yes , still hoping for some sort of break through in the debugging, thanks
Sent from my A500 using xda app-developers app

adb from my machine is not working when i boot my device normally, can only see it in adb when booted into CWM recovery.

Worth mentioning that the tab doesn't shutdown ! It always keeps rebooting
Sent from my A500 using xda app-developers app

Maybe try flashing with a newer version of odin. I have been using odin 3.07 successfully without issue since I got this tab. May want to see if flashing with a more recent version actually successfully flashes correctly. If kernel doesnt flash correctly with odin then it could affect the way drivers are handled in all roms following.

[Q] Downgrade from LSA JB to ICS?

I've run the LSA firmware with little to no issues for a while now, but recently my phones decided to run hot and reboot itself with increasing frequency.
so I'de like to revert back to stock ICS and see if that helps or if I'm looking at a hardware failure.
is there any particular trick to this or can I just backup using Ti, load the new (old) ICS firmware in Odin and flash away?
thanks for any advice guys...

How old is your phone? Make sure your battery is good condition, before proceeding anything.
Sent from my GT-N7000 using xda premium

dsmas said:
How old is your phone? Make sure your battery is good condition, before proceeding anything.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Nov 2011 (just over 12 months)
the battery is a Gold higher capacity model, there is no bulges or tears and the heat isnt coming from that, I pulled it to check. the glass side is the hottest side.

Good. My suggestion is, go through drketan threads / tutorials which are comprehensive on your problem.
Sent from my GT-N7000 using xda premium

dsmas said:
Good. My suggestion is, go through drketan threads / tutorials which are comprehensive on your problem.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
on the problem or my intended solution?
I've started uninstalling apps because the thing reboots during backup.
every-time i uninstall an app it reboots as well.

If you want to go back to ics, backup whatever you want using tb.
Then boot into recovery. Format/system, data, cache, preload.
Then go to advanced and choose reboot download. Then connect to pc and flash using odin. Make sure not to wipe while on stock ics kernel. Install a safe kernel ASAP.

nokiamodeln91 said:
If you want to go back to ics, backup whatever you want using tb.
Then boot into recovery. Format/system, data, cache, preload.
Then go to advanced and choose reboot download. Then connect to pc and flash using odin. Make sure not to wipe while on stock ics kernel. Install a safe kernel ASAP.
Click to expand...
Click to collapse
cool, looks like I fixed it by rolling back to ICS.
Had to use Mobile Odin because the PC Odin wasnt playing ball... but meh. whatever gives me back my toy (that nexus s felt like a toy in my hands)
thanks all for the help.

senectus said:
cool, looks like I fixed it by rolling back to ICS.
Had to use Mobile Odin because the PC Odin wasnt playing ball... but meh. whatever gives me back my toy (that nexus s felt like a toy in my hands)
thanks all for the help.
Click to expand...
Click to collapse
can you please explain how you rolled back?

scorpion100 said:
can you please explain how you rolled back?
Click to expand...
Click to collapse
backed up user data using Ti
flashed PhilZ-cwm6-XXLSA-DBT-3.99.tar.md5 as per the PC Odin instructions
copied the N7000XXLRT_N7000DBTLRT_N7000XXLRK_HOME.tar.md5 file to micro SD
flashed N7000XXLRT_N7000DBTLRT_N7000XXLRK_HOME.tar.md5 u sing mobile odin pro
done.

[Q] Safestrap Stock slot showing 0 space available

accidentally installed a jellybean copy of dynamic instead of the kit kat version.Safe strap is the kit kat version. Now my stock slot is showing 0 space for system and I cant seem to straighten this mess out. Anyone have any help they can give?

no one has any ideas how to fix this?

Did you install the JB version in a slot? Or is it in the stock slot? Does the rom boot? What happens if you try to install something to the stock slot?

I_R_Josh said:
Did you install the JB version in a slot? Or is it in the stock slot? Does the rom boot? What happens if you try to install something to the stock slot?
Click to expand...
Click to collapse
jb version went into the stock slot, boots till it gets to the safestrap options screen and i cannot install anything into any slot....the stock slot shows
0 space but the data partition has almost 27 gigs.
im at a loss

What (if any) errors do you get when doing just a wipe on the stock slot?
Sent from my SM-N900A using xda app-developers app

I_R_Josh said:
What (if any) errors do you get when doing just a wipe on the stock slot?
Sent from my SM-N900A using xda app-developers app
Click to expand...
Click to collapse
dont have the option to wipe the stock slot. only option is activate

Will it let you mount system in the "mount" tab?
Sent from my SM-N900A using xda app-developers app
---------- Post added at 05:42 PM ---------- Previous post was at 05:33 PM ----------
I had some file system errors that only went away with a wipe from stock recovery.
Sent from my SM-N900A using xda app-developers app

I_R_Josh said:
Will it let you mount system in the "mount" tab?
Sent from my SM-N900A using xda app-developers app
---------- Post added at 05:42 PM ---------- Previous post was at 05:33 PM ----------
I had some file system errors that only went away with a wipe from stock recovery.
Sent from my SM-N900A using xda app-developers app
Click to expand...
Click to collapse
how do i get the stock recovery back?
no it wont let me mount system ....and thanks for your help here

I was still able to boot the rom, so I rebooted to stock recovery from there. There's usually a combination (holding home/power/volume) while booting but I haven't done it yet on this phone. Lemme look around/test on my phone.
Sent from my SM-N900A using xda app-developers app

Hold power/home/volume up all at the same time.
(I sent this earlier but it never went through. ..)
Sent from my SM-N900A using xda app-developers app

Tried kies recovery and now its even more messed up. I'll play with it some more and see what happens
Sent from my GT-N8013 using xda app-developers app

Same problem
knoshann said:
accidentally installed a jellybean copy of dynamic instead of the kit kat version.Safe strap is the kit kat version. Now my stock slot is showing 0 space for system and I cant seem to straighten this mess out. Anyone have any help they can give?
Click to expand...
Click to collapse
I had installed kitkat instead of jelly bean, was even on new kit kat safestrap 3.72... I even tried the factory recoverys wipe, now i have no roms, and 0/0 free space on system and 0/0 on data in stock slot, and nothing else installed at all.. when i did at least have working rom in slot 1. Someone please haaalp! lol

kizzle4 said:
I had installed kitkat instead of jelly bean, was even on new kit kat safestrap 3.72... I even tried the factory recoverys wipe, now i have no roms, and 0/0 free space on system and 0/0 on data in stock slot, and nothing else installed at all.. when i did at least have working rom in slot 1. Someone please haaalp! lol
Click to expand...
Click to collapse
Here you go. Follow this guide. This is probably your only option at this point.
http://forum.xda-developers.com/showthread.php?t=2559715
Sent from my SM-N900A using xda app-developers app

Thanks. Have all that downloaded and ready to go.. have rom running on slot 1. Just obviously missing space overall now. Is there anyway to just restore that partition? Has anyone else experienced this? All I did was wipe like the rim thread told me to do. Don't understand how and why this happened.

kizzle4 said:
Thanks. Have all that downloaded and ready to go.. have rom running on slot 1. Just obviously missing space overall now. Is there anyway to just restore that partition? Has anyone else experienced this? All I did was wipe like the rim thread told me to do. Don't understand how and why this happened.
Click to expand...
Click to collapse
Any luck with this? I have about the same issue but haven't had a chance to give this a try

knoshann said:
Any luck with this? I have about the same issue but haven't had a chance to give this a try
Click to expand...
Click to collapse
Ended up doing mj5 restore. Staying on jelly bean for now...