Database Develop

[Q] How install cwm 5.0.2.8

Hi !
I've download cwm 5.0.2.8 and i've restarted at APX (Volume + Volume - and connect usb without battery)
I launch "install-cwm-int.bat" and "install-cwm-ext.bat" but appears in cmd "error device not found" but in Windows 7 appears like detected "APX"
Can you help me to install cwm 5.0.2.8 ?
Thanks

Sir,do you happen to know where to download previous versions of CWM? Tried searching the android development forums but had no luck. Thanks!

dsb_spain said:
Hi !
I've download cwm 5.0.2.8 and i've restarted at APX (Volume + Volume - and connect usb without battery)
I launch "install-cwm-int.bat" and "install-cwm-ext.bat" but appears in cmd "error device not found" but in Windows 7 appears like detected "APX"
Can you help me to install cwm 5.0.2.8 ?
Thanks
Click to expand...
Click to collapse
You don't need an APX mode to flash CWM... Just connect your phone to a PC, making sure USB Debugging is enabled (under Settings -> Applications -> Development). Then run that batch file again.
Edit: Err... OK, sorry, I may be confused. Did you use the package and instructions from here? If so, then you do need an APX mode. I haven't tried that... I was thinking about the other CWM package, which you flash using ADB -- that's a different procedure.
mondc1088 said:
where to download previous versions of CWM?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=14189816&postcount=1
Look at the end of the post (Older versions).

mondc1088 said:
Sir,do you happen to know where to download previous versions of CWM? Tried searching the android development forums but had no luck. Thanks!
Click to expand...
Click to collapse
Try temasek's mediafire folder, look at the p990 folder.
http://www.mediafire.com/temasek#yn2x41d03i6ey

dsb_spain said:
Hi !
I've download cwm 5.0.2.8 and i've restarted at APX (Volume + Volume - and connect usb without battery)
I launch "install-cwm-int.bat" and "install-cwm-ext.bat" but appears in cmd "error device not found" but in Windows 7 appears like detected "APX"
Can you help me to install cwm 5.0.2.8 ?
Thanks
Click to expand...
Click to collapse
Just root the phone and flash cwm with ROM manager from Playstore. Later you could flash kashmalaga cwm 6.x .zip
Sent from my Optimus 2X with Paranoid Android. Thanks button is here ↓ !!! Just use it

But be aware, Kashamalaga ain't compatible with everything, not non touch either

fastboot flash recovery recoveryname.img

Easy Root Official V30A

I realize root for V30A, (no data wipe and original bootloader)
- Download it -> http://www.multiupload.nl/3NOTPXFDSB
- Connect to pc Optimus 2X in APK MODE (Nvflash mode: no battery and volume "+" and "-" pressed)
- Start Flash.bat and please wait.
- At the end, Optimus 2X V30a is rooted, Enjoy

Thanks, if I can update my phone via update tool gonna try this.

frikou said:
Thanks, if I can update my phone via update tool gonna try this.
Click to expand...
Click to collapse
donwload kdz and flash it or.. extract smartflash file ! It is very easy to upgrade

gabrielecif said:
I realize root for V30A, (no data wipe and original bootloader)
- Download it -> http://www.multiupload.nl/3NOTPXFDSB
- Connect to pc Optimus 2X in APK MODE (Nvflash mode: no battery and volume "+" and "-" pressed)
- Start Flash.bat and please wait.
- At the end, Optimus 2X V30a is rooted, Enjoy
Click to expand...
Click to collapse
Thanks a lot! ATM, downloading V30A. Have slow connection so will take huge time. Meanwhile can someone confirm this root mod? Anyone tried? Is root perfect?

cmahendra said:
Thanks a lot! ATM, downloading V30A. Have slow connection so will take huge time. Meanwhile can someone confirm this root mod? Anyone tried? Is root perfect?
Click to expand...
Click to collapse
Root work perfect

file is removed?

no any file removed

Does this rom include cwm and bootloader unlock? Thanks.

I'm getting a load of stuff asking me to install Ilivid. But no download. Have I missed something??

tophelecool said:
I'm getting a load of stuff asking me to install Ilivid. But no download. Have I missed something??
Click to expand...
Click to collapse
direct download from multiupload !

I have done the root with nvflash.. but on the monitor there is "s/w upgrade please wait while upgrading" .... i'm waiting 1 hour... (sorry for my english)..help me

kekko4ever said:
I have done the root with nvflash.. but on the monitor there is "s/w upgrade please wait while upgrading" .... i'm waiting 1 hour... (sorry for my english)..help me
Click to expand...
Click to collapse
Are you going in S/W upgrade mode for NVFlash? Thats wrong. You have to to in APX mode for NVFlash. SW Upgrade mode is for SmartFlash, not applicable here.
Check my current signature to find how to go in APX mode and install APX drivers. Screen is blank(looks like switched off) when you go in APX mode.
---------- Post added at 02:55 AM ---------- Previous post was at 02:52 AM ----------
gabrielecif said:
Root work perfect
Click to expand...
Click to collapse
thanks for confirmation. will try later.

cmahendra said:
Are you going in S/W upgrade mode for NVFlash? Thats wrong. You have to to in APX mode for NVFlash. SW Upgrade mode is for SmartFlash, not applicable here.
No. i have use apx mode.. anyway i disconnected the phone.. seems to work.. now the problem is account google.. if i used the browser i log in.. if use the account google of the phone or play store not work..
Click to expand...
Click to collapse

do a factory reset ! in my phone.. no problem !

I solved it was the time and date that did not make me access -.-

perfect ! incorrect date non allow to work play store

kekko4ever said:
I solved it was the time and date that did not make me access -.-
Click to expand...
Click to collapse
and another mistery????
how come you can post in dev section with only 3 posts?

look at his date of join.It is hard to believe his no. of posts in that amount of time.

Confirmed working.
Side info: had problems with recovery driver , I needed to reinstall drivers and then when connected to pc I needed to run true all the usb connection options like , charging only , mass storage , tethering ,... this way it started to install all different drivers.
I received ICS update today when connecting to the LG update tool , it said a update was available and warned me to remove external SD while it was going to update to ICS.
Removed the external and started the update , (V30a android 4.0.4 was what I received) , Then I reconnected the phone and it installed PC sync for ICS and blablabla.....
I gotta say it is really smooth.

Anyone could say how long to wait until its save to stop the Nvflash?
Its now over 1-2 hour and seems not to happen anything anymore.
And i did that nvflashing often before. The driver is the same as last time.
No problems in device manager. Its an XP Laptop without any Antivirus or Firewall.
I had the latest rooted nvflash version on my LG P990 before that.
In the CMD window it tells only Nvflash started and the Display shows:
"S/W Upgrade Please wait while upgrading".
Never had that before and i am a bit nervous to kill it
But i think i read somewhere i can do it again also if i stoped it.
---edit---
Ok i stoped and redid it. Also made wipe with cwm.
But this flash isnt working for me.
I get:
"failed executing command 14 NvError 0x120000
command failure: partition download failed"
I tryed to give it an external SD, full wipe and cache wipe. Nothing.
Error stay BUT only with this flash offert here.
I had a backup flash of 20L and that could be flashed without any problem.
I had adroid 2.3.4
1035.21_20110725
kernel 2.6.32.5
===FINAL EDIT===
Going back to official 2.2.2 changed nothing! This "easy way didnt work for my P990
Solution:
Smartflash worked fine!
http://forum.xda-developers.com/showthread.php?t=2028946
Bin+FLS flash
Rooting
As mentioned Solution 1 here didnt work at all. Cant say why.
I tryed really a lot and spent to much time on that topic.
Wasnt as easy as before on 2.x.x...and none of the 3 Solutions worked for me!
But a combination works fine.
The Solution 3 didnt work for me.
"=3= (thanks to joiN85)" didnt work...got a boot loop ((
Solution 2 "=2= (thanks to RobYyY)" worked half...
but i had to use the "Superuser-3.1.3-arm-signed-tradotto.zip"
on an external sd and not the SuperSU Root.zip.
Finally a hint that i is very important:
Dont forget to set the correct Date and Time or google will
Display a connection error.
Great work and sooooo fast... I wanne say thank you for everyone
who made it possible. Good work!

[Q] Completely bricked or salvageable?

Hey there,
Just today I decided to download a new ROM for my LG Optimus 2x. I tried to install the ParanoidAndroid CM10 ROM via the CWM Recovery. (place files on SD card, reboot in recovery, wipe, install) But I accidentaly installed the version for the new bootloader instead of the old bootloader which I still have. So needless to say, that didn't work and I was stuck with a boot loop, the phone didn't get passed the LG animation screen. So I figured out that I needed the older bootloader version. I downloaded it, put it on my SD and tried to boot into CWM Recovery... nothing. It did not catch the Power + Volume-down combination and instead just continues its regular boot-loop with the LG animation.
I had flashed a ROM with nvflash before, so I installed the drivers (I tried this step on 2 PC's mind you) and put the phone in the desired state (battery out, usb cable connected, press volume-up and volume-down for a short while). But to my surprise, my computer did not recognise the phone. It doesn't even see it connected or anything! I did install the LG Mobile drivers beforehand, if that makes any difference, but nothing changed the situation, I couldn't get my PC to recognise my phone in NVFlash mode.
Okay. I'm a though guy so I figured I could still try and use the Smartflash method. So I install the drivers necessary, hook my phone up with the battery removed, hold the volume down-key and I see the "Upgrading software" screen, good! But again my computer did not recognise my phone just a little bit. It doesn't show up in the device manager and neither do I have an option to install additional drivers.
I'm baffled by all this since I did not think one ****-up would brick(?) my phone this bad. Is there any way that I could just get it working again? For now I really don't care what ROM version I have to install, I just want it functional again
Thanks!

Andorenan said:
Hey there,
It doesn't show up in the device manager and neither do I have an option to install additional drivers.
Thanks!
Click to expand...
Click to collapse
LG O2X is 99.99999999% is un brickable.....have you tried the AIOT kit by Sprosk or the Nvflash stuff by Progmaq....
In addition tho this: partitions changed normally with nvflash method.....is it done through CWM?

SREEPRAJAY said:
LG O2X is 99.99999999% is un brickable.....have you tried the AIOT kit by Sprosk or the Nvflash stuff by Progmaq....
In addition tho this: partitions changed normally with nvflash method.....is it done through CWM?
Click to expand...
Click to collapse
I did. I tried both the nvflash stuff and the smartflash method. But somehow my computer does not recognise the device while it's plugged in. It doesn't even see that something is plugged in.
I'm sorry but I'm not sure what you mean with the partitions changing through CWM. Could you please elaborate on that?

Andorenan said:
I did. I tried both the nvflash stuff and the smartflash method. But somehow my computer does not recognise the device while it's plugged in. It doesn't even see that something is plugged in.
I'm sorry but I'm not sure what you mean with the partitions changing through CWM. Could you please elaborate on that?
Click to expand...
Click to collapse
the old and new bootloader are different in partition layout and the size of partitions....this can be done through only the nvflash method, or kdz method.
look at the AIOT tool kit thread opening post for more information.....
The ROMs which are based on the old boot loaders are not compatible with the new bootloader.....vice versa
-have you tried to change your USB cable?
-tried changing the USB ports?
-using win8, then you need to do it differently.....so check that too
-try using ports directly connected to motherboard....not through any USB hubs
Hope this helps you

Andorenan said:
I had flashed a ROM with nvflash before, so I installed the drivers (I tried this step on 2 PC's mind you) and put the phone in the desired state (battery out, usb cable connected, press volume-up and volume-down for a short while). But to my surprise, my computer did not recognise the phone. It doesn't even see it connected or anything!.
Click to expand...
Click to collapse
Make sure you are pressing and holding both volume keys while you are plugging the USB cable in. Pressing them after plugging the cable in will not put the phone into APX mode.
Sent from my LG-P990 using Tapatalk 2

[Q] Flashing new bootloader - help

Hi,
I am currently on the old GB bootloader and want to flash the new one but for some reason my usb to pc connection never seems to work. I had this problem since cm7.1 rom. I am currently on the Avatar rom and somehow when i plugged my phone to charge on my laptop, the connection worked and it prompted me to turn on the usb storage.. but it again stopped working. I would really appreciate some help with this, is there any way to completely go back to the stock rom (I dont have any stock rom backup) just by flashing a zip through cwm. or even better to update to the new bootloader from the phone itself.
Thank you in advance

Use the AIO Toolkit by spyrosk to change to new bootloader:thumbup:
Sent from my LG-P990 using xda app-developers app

noob424 said:
Use the AIO Toolkit by spyrosk to change to new bootloader:thumbup:
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Thats exactly what i tried but my laptop doesn't recognize the the connection. I have all the correct drivers installed.

You install the Nvidia USB driver ? to use de AIO toolkit with nvflash is than better , but you must run your phone in APX mode (connect to PC , remove the battery, pres vol - and + , ) YOU MUST INSTALL THE NVIDIA USB DRIVER , after that run AIO toolkit and press option 8 , i think
and That`s it
http://forum.xda-developers.com/showthread.php?t=2020737

[Q] cannot root with v20c

Hello,
Last week i updated my phone throw the official LG PC suit to v20c 4.1.2, and i tried to root the phone throw that:
1st: i read this topic http://forum.xda-developers.com/showthread.php?t=1818502 and downloaded the recommended tools but when i tried to install
IS11LG_SystemBackupTest.signed.apk it said " unfortunitly an error occured " so this made me not to complete the steps
2nd: i tried this topic http://forum.xda-developers.com/showthread.php?t=2230934 but also it did not work !!!!!
so i wanna know my options now because i wanna to root it the fastest way as i can >>> some info from phone
Android version : 4.1.2
Kernel version : 3.1.10
Software version : p88020c-ame-xxx​

do you have the correct driver installed on your pc?
Sent from my tf101

arrivals18 said:
Hello,
Last week i updated my phone throw the official LG PC suit to v20c 4.1.2, and i tried to root the phone throw that:
1st: i read this topic http://forum.xda-developers.com/showthread.php?t=1818502 and downloaded the recommended tools but when i tried to install
IS11LG_SystemBackupTest.signed.apk it said " unfortunitly an error occured " so this made me not to complete the steps
2nd: i tried this topic http://forum.xda-developers.com/showthread.php?t=2230934 but also it did not work !!!!!
so i wanna know my options now because i wanna to root it the fastest way as i can >>> some info from phone
Android version : 4.1.2
Kernel version : 3.1.10
Software version : p88020c-ame-xxx​
Click to expand...
Click to collapse
IS11LG_SystemBackupTest.signed.apk ____> 4.0.x You can root V10 with this apk.
Tool all in one for 4.1.2
if you want to root your phone with tool.
Shut down your phone then press Volume down and power. Open the recovery mode and select adb sideload.
Tools will make your phone root.

momothecat said:
do you have the correct driver installed on your pc?
Sent from my tf101
Click to expand...
Click to collapse
Don't know i actually used the drivers in AIO tool first but after failed i used the drivers on LG site Also failed

barscenk said:
IS11LG_SystemBackupTest.signed.apk ____> 4.0.x You can root V10 with this apk.
Tool all in one for 4.1.2
if you want to root your phone with tool.
Shut down your phone then press Volume down and power. Open the recovery mode and select adb sideload.
Tools will make your phone root.
Click to expand...
Click to collapse
failed!!
i will tell u what i did
1- connected device and choose battery mode
2- shut down
3- pressing power button and vol- together
4- after the recovery mode appeared selected the second choice wich is " upgrade adb"
5- open all in one tool as admin.
6-choose 1 "root"
7- it said error device not found !!!!!!!!!!!!!!!!
remember from info above i am not EUR-XXX i am AME- XXX

Quite surprising someone tried to root V20x using V10x's method / exploit.
Try this method:
http://forum.xda-developers.com/showthread.php?t=2180688

arrivals18 said:
failed!!
i will tell u what i did
1- connected device and choose battery mode
2- shut down
3- pressing power button and vol- together
4- after the recovery mode appeared selected the second choice wich is " upgrade adb"
5- open all in one tool as admin.
6-choose 1 "root"
7- it said error device not found !!!!!!!!!!!!!!!!
remember from info above i am not EUR-XXX i am AME- XXX
Click to expand...
Click to collapse
I am AME-xx too
Check your device manager, you will see unknown device named LGP880 ( In recovery Mode )
Use AdbDriverInstaller at attached for install Lg driver.
Then Try again adbsideload.

L2Deliver said:
Quite surprising someone tried to root V20x using V10x's method / exploit.
Try this method:
http://forum.xda-developers.com/showthread.php?t=2180688
Click to expand...
Click to collapse
thanx thanx my friend it really works much easier than i thought
so thax ,thanx ,thanx and >>>>>>>>>>>>>>>>>>>>>> thanks BUTTON

Thank You guys .. all of u