Database Develop

[Q] CheckRom V6 & What kernel?

Guys what it the best kernel for checkrom V6?
I mean.. i want advices BUT why did you made such a choice?

For me it is Franco hands down. Tested v2, v6 and the latest 'test' one (this will become v10 tomorrow or the day after, judging by the users' comments), and all proved to be smooth, fast, stable and easy on the battery on my Note.

I would second Franco kernel also. Been using it since v6 had no problems with lag at all. Battery life with this combination seems good as well.

Now this is a good start
I have been in CF ROOT for XXLC1 but i dunno why i feel the stock kernel is a little bit lagged in menus!
Will try Franco Kernel
Thanks for your replys!

zylor said:
Now this is a good start
I have been in CF ROOT for XXLC1 but i dunno why i feel the stock kernel is a little bit lagged in menus!
Will try Franco Kernel
Thanks for your replys!
Click to expand...
Click to collapse
Franco 9.....pure awesomeness !! Best battery backup m getting by using it. Earlier tried Abyss 4.2 but got a high battery drain !
Go for Franco !!!

but doesn't changing the kernel change some supported features in the rom ? like ntfs support for instance ?

ages_devil said:
but doesn't changing the kernel change some supported features in the rom ? like ntfs support for instance ?
Click to expand...
Click to collapse
Check the changelogs of the kernel you are about to use it will give you all the salient features and changes that it has and can happen!
Cheers!

Hey guys,
Don't wanna seem like jacking the thread, but is it possible to install Vertamus's ICS theme in V6?

itismadhan said:
Hey guys,
Don't wanna seem like jacking the thread, but is it possible to install Vertamus's ICS theme in V6?
Click to expand...
Click to collapse
Yeah of course! I have it installed on my phone. just go to the inbuilt kitchen (update it to the latest version from google play store) and download the file given there under the themes section. Its version1.1 as of now. And install it in recovery !!
Cheers! Hit thanks if it helped!

I was using stock CF-Root and it was fine, but the battery drain was a bit higher vs V5 CheckROM. Installed Franco and its running great, 1.5% Per Hour idle.

was using checkrom v6 with Franco's test kernel. Seems like its draining battery more than stock. Gonna verify it over the nxt few days by using stock

Also on Franco test kernel.

Also on franco kernel v9, works like a charm. Good battery life but no as good as CheckROM v5 & franco v6

For me Franco kernel cause constant sods.
I keep trying a newer versions and still same issue. This problem doesn't occur for me on other kernels
Sent from my GT-N7000 using xda premium

Blue1k said:
For me Franco kernel cause constant sods.
I keep trying a newer versions and still same issue. This problem doesn't occur for me on other kernels
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Yeah for some of the users Franco gives sods or screen salad issue - pixelated screen while other kernels work fine for them! Thankfully works fine for me

abhisahara said:
Yeah for some of the users Franco gives sods or screen salad issue - pixelated screen while other kernels work fine for them! Thankfully works fine for me
Click to expand...
Click to collapse
Well Franco works like a charm so far.. have been testing it for over 2 weeks and works very nicely ^^
Can't barely wait for V7.. Gotta wait for jkay's magic

can someone please post links to francos kernels especially v 9 and other GB kernels,
is abyss 4.2 kernel GB kernel ?
theres something wrong with the way im searching....im going round and round

Abysskernel.
Running on it without any problem.
Sent from my GT-N7000

rraaka said:
can someone please post links to francos kernels especially v 9 and other GB kernels,
is abyss 4.2 kernel GB kernel ?
theres something wrong with the way im searching....im going round and round
Click to expand...
Click to collapse
Abyss 4.2 is a gb kernel. Don flash it in a ICS
Sent from my GT-N7000

[Q] BEST ROM with BEST KERNEL with NO CRASHES

OK So this is the burning question i have to ask next. ??
!!!! N-7000 SERIES ONLY !!!!!
BEST ROM with FULL Galaxy Note Spen Functionality and all the Touchwiz apps.
with WHAT KERNEL ?
and how long have you been running the rom? with how often does the rom Crash (making the phone do a soft reboot)
I am very curious to see what people are running on there Gnote since now that the Gnote now is becoming so popular. i am personally running Checkrom NOTEHDv5 with normal CF kernel and it is stable but sometimes it crashes and there alot of bugs. and i am in the market to changing roms but this is my DAILY use PHone so i am curious what my proud Gnote friends are running on there devices.

i used many of the roms out there and i end up using the new midnote 2.2
i think its the best ics rom so far , with every thing working on it . the good thing about it is down clocked to 1.2 ghz , which is good for the battery .

My choice:
Rocket ROM v23 with Franco Kernel (latest test-version).
Fast, stable, super battery-life. Couldn't be happier with a gingerbread-combination.

Lol i don't know what one i want to switch to :-\
Sent from my GT-N7000 using XDA

I try many roms and i find this:-
- if you like ICS but without full galaxy note functionality go as AOSP latest vesion
- if you like ICS with full galaxy note functionality go as midnote 2
- if you like gingerbread with battery life go as checkrom
that is my personal opinion
but i want to know, why all people go to rocketrom not checkrom ?

Yes!! What Elk said.. RR V23 with Franco #9

I personally like checkrom but i am using hardcore's kernel and its amazing
Sent from my GT-N7000 using XDA

CheckROM HD. I tried 4 or 5 ROMs including TeamRocket but this is by far the best. 3-4 days of battery life with light usage, NO crashes, kitchenpro app (google it!).. pretty amazing for me!

rp4k said:
I personally like checkrom but i am using hardcore's kernel and its amazing
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
With harcore's kernel, it's hard to troubleshoot problem due to logcat being disabled.

Darkyrom with Franco #9 for GB...I'm testing Midnote 2.2 with Abyss now.

PoisonWolf said:
With harcore's kernel, it's hard to troubleshoot problem due to logcat being disabled.
Click to expand...
Click to collapse
he is getting alot of support from the community, and his new 2-8 Kernel really makes my note fly and run very smooth.. when i was on Stock CF or abyss or another kernel (can't remember) i was getting crashes all the time.. if you haven't tried out his kernel yet.. i would plus i get 2 days battery life on it also.

Stock Rooted LC1
*shrug*

rp4k said:
OK So this is the burning question i have to ask next. ??
!!!! N-7000 SERIES ONLY !!!!!
BEST ROM with FULL Galaxy Note Spen Functionality and all the Touchwiz apps.
with WHAT KERNEL ?
and how long have you been running the rom? with how often does the rom Crash (making the phone do a soft reboot)
I am very curious to see what people are running on there Gnote since now that the Gnote now is becoming so popular. i am personally running Checkrom NOTEHDv5 with normal CF kernel and it is stable but sometimes it crashes and there alot of bugs. and i am in the market to changing roms but this is my DAILY use PHone so i am curious what my proud Gnote friends are running on there devices.
Click to expand...
Click to collapse
I Have tried-
Rocket Rom v23 with abyss 4.2 and franco9. And franco is the best kernel Best battery life.
Darky rom v3.3 with franco 9
Check Rom v5 with Franco 9
Rocket ICS
Midnote ICS
About to flash ICS Stunner
Currently on rocket v23 with franco 9. But the Best rom for me was Darky rom v3.3 with Franco 9. No sod or crashes. smooth and great battery life.
Hope this info helps Hit thanks

abhisahara said:
I Have tried-
Rocket Rom v23 with abyss 4.2 and franco9. And franco is the best kernel Best battery life.
Darky rom v3.3 with franco 9
Check Rom v5 with Franco 9
Rocket ICS
Midnote ICS
About to flash ICS Stunner
Currently on rocket v23 with franco 9. But the Best rom for me was Darky rom v3.3 with Franco 9. No sod or crashes. smooth and great battery life.
Hope this info helps Hit thanks
Click to expand...
Click to collapse
Try hardcore speedmod kernel its amazing
Sent from my GT-N7000 using XDA

Best kernel for JW6 ?

Hi !
I use Semaphore 2.7.4 with JW6 and though it's good, it still lags and the screen freezes at times. I am in Thailand but use Australian firmware cause officially there is no 2.3.6 for SGS here.
Tried midnight and speedmod but they are not so good for my phone. Is there a Devil's kernel available for this Rom ?
Somebody please advise me !
Thanks !
Sent from my GT-I9000 using xda premium

There isn't Devil kernel for JW6, only for CyanogenMod 7 and CyanogenMod 9. I think you tried all of available kernels. You can also try CF-ROOT kernel (only root, without mods in kernel).
JW6 is one of the latest and best ROMs for our I9000, so I'm shocked that you are not happy with it. Lags? Freezes? When?
Maybe you have some bloatware that are slowin' down your phone?
If you want stable and fast ROM, flash stable CM7 and use it's stock kernel.
CM9 is also good, but latest nightlies have some random issues (eg. weird ringer, missing power widgets).

Maybe try MNGB by Mialwe. It's my favourite, because it has many features and is responsive and fast. I never had lags with the kernel and it is made for JW4/5/6!
Link here: http://forum.xda-developers.com/showthread.php?t=1199140&highlight=mngb
Happy testing

[Q] ROCKET ROM-V2 + HydraCore v7 stuck at bootlogo

Hi all I'm Marco from Italy! This is my first post and i'm afrad it's a sad one...
I've flashed Rocketrom V2 and it was working, then i've flashed HydraCore v7 OC, it has updated all the apps but it did'nt go past this operation.
So i've flashed HydraCore v7 No OC. now it stands stuck at bootlogo and it won't go on CWM or Dowload mode...
I've done every passage using a safe Kernel with MMC_CAP_ERASE removed.
Don't know what to think.
Please help! thanks!

this rom won't work with hydracore v7, that's why it does not boot. but why can't you get into recovery Mode? what happens when you press vol up power and home together?

i't working don'tn know why! i've tried to boot at least 10 times on CWM and it did'nt work...now it's working
thanks anyway!!!
i've flashed PA 2.51 JB cause rocket seems a bit laggy to me. hydracore woud do just fine with this ROM right?

yes, any rom that's not based on xxls2 or xxls7 will work just fine with hydracore v7

thanks again! will try right now!

sorry, what will you try ?

to flash hydracore on PA 2.51 ...done and it's running flawlessy by now

gr8.. v7 is a wonderful kernel. hopefully we will get it for TW jellybeans as well

nokiamodeln91 said:
gr8.. v7 is a wonderful kernel. hopefully we will get it for TW jellybeans as well
Click to expand...
Click to collapse
1+ :silly:

+1

MarcoFranceschi said:
to flash hydracore on PA 2.51 ...done and it's running flawlessy by now
Click to expand...
Click to collapse
please where did you download hydra core v7 from. I need it as i'm about to flash ultimate jb ro (currently using rocket rom v3). Wouldve usd PA like u but i love my snote app and have a lot of notes. If possible could u upload hydracore v7? I need d overclocking features

It won't work with any TW JB rom. You can OC JB leaks using tegrak app from the playstore

Does it support overclock GPU? Currently running ultimate jelly bean Rom with Philz kernel
Sent from my GT-N7000 using xda app-developers app

There is an option to OC GPU in tegrak. Not sure if it works.

[Q] Newbie question about Kernels

Sorry if this is a dumb question. I'm still learning about ROMs and Kernels.
Before I installed JB Ultimate N7000 XXLS7 Jellybean 4.1.2 v4, I had the Hydracore universal kernel installed.
The JB ROM comes packaged with its own kernel. Is there any reason why I should re-install Hydracore?Is there any advantage to doing this at this stage?
The only change I can see wanting to make to my phone in the foreseeeable future is to try out the official Sangsung Jellybean ROM when it finally gets released as this may include features or apps not in the 4.1.2 v4 and I would like to compare.
Thanks and reagrds
Trevor

which version of Hydracore were you refering to ? if it is compatible with LS7 ( not too sure about that) then the OC version of it will give you the ability to overclock if you are a fan of that feature.
most continue on Phillz ls7 kernel, its the only one which allows the multi-window feature in ls7 to work

hydracore is not compatible with any leak jb based roms. install only if you want your phone not to boot

Many thanks for your reply.
The zip file I have is GL_HYDRACORE_v5-4_STD.zip.
Since, I've no interest in over clocking, it doesn't sound as if there is any reason to re-install this Kernel and nokiamodeln91 says it will cause the phone not to boot anyway.
I just thought having read the claims made by the develope about it being compatible with ANY ROM and all that, that it might offer some advantage if I want to change ROM later.
You mention Phillz Is7 kernel as the only one allowing the multi-window feature to work. Didn't know I hadn't got MW (Duhh!). So would you recommend installing that to make that feature work? I'll do some reading up about that kernel after this.
Thanks again.
Trevor
rraaka said:
which version of Hydracore were you refering to ? if it is compatible with LS7 ( not too sure about that) then the OC version of it will give you the ability to overclock if you are a fan of that feature.
most continue on Phillz ls7 kernel, its the only one which allows the multi-window feature in ls7 to work
Click to expand...
Click to collapse

sacentre said:
Many thanks for your reply.
The zip file I have is GL_HYDRACORE_v5-4_STD.zip.
Since, I've no interest in over clocking, it doesn't sound as if there is any reason to re-install this Kernel and nokiamodeln91 says it will cause the phone not to boot anyway.
I just thought having read the claims made by the develope about it being compatible with ANY ROM and all that, that it might offer some advantage if I want to change ROM later.
You mention Phillz Is7 kernel as the only one allowing the multi-window feature to work. Didn't know I hadn't got MW (Duhh!). So would you recommend installing that to make that feature work? I'll do some reading up about that kernel after this.
Thanks again.
Trevor
Click to expand...
Click to collapse
Which kernel you are currently on? If you haven't installed any kernel manually, that means you already have Philz kernel, which comes by default with Ultimate JB v4..

Yes, of course, you're right. I just didn't recognise the name of the Kernel. Sorry.
Shyam said:
Which kernel you are currently on? If you haven't installed any kernel manually, that means you already have Philz kernel, which comes by default with Ultimate JB v4..
Click to expand...
Click to collapse

check out the multi-window feature which is the hallmark of ls7 , some ls7 rom OPs have videos on it , learn how to enable it. its KEWL

Thanks. All working fine.