1900 is up and running in my area. Still, I only get edge. I've modded everything I was supposed to...I think. Any ideas on getting 3g at least?
terrapin69 said:
1900 is up and running in my area. Still, I only get edge. I've modded everything I was supposed to...I think. Any ideas on getting 3g at least?
Click to expand...
Click to collapse
What do your APN settings look like?
they are grayed out
And not much populated. What should they be and how can i edit?
heres my apn..newly created
I just created this..
T Mobile US
Apn: epc.tmobile.com
Proxy: 216.165.155.050
Port: 8080
Mmsc: http://mms.msg.eng.t-mobile.com/mms/wapenc
Mms proxy: 216.165.155.050
Mms port: 8080
Mcc: 310
Mnc: 260
All other fields are blank.
For bearer. Its unknown
Related
While traveling overseas in Malaysia I bought a pay-as-you-go SIM card and got phone and 3G service for a week. Worked great!
Now that I'm back in the states I have no 3G service with AT&T.
What do I have to do to get my phone back to 3G service? I can call and text just fine. Wifi is fine too.
I've looked for a FAQ please point me to one if it exists.
I'm running Cognition 3.02. Probably more info is needed. If so please let me know.
Thanks,
Gary
Solved!
Did some reading on the site and found: http://forum.xda-developers.com/showthread.php?t=943937
My WAP info had been cleared. Added:
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
User name: Not Set
Password: Not Set
Server: Not Set
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port 80
MCC: 310
MNC: 410
Authentication type: None
APN type: internet + mms
May not be optimum settings but it does work.
Gary
Hello,
I have a GT-P1000 that I am trying to connect to the Fido network's 3G/H 850/1900 without much success.
I am currently running the Overcome Stock Safe firmware and have gone through a number of modems trying to achieve the networks full potential.
So far all I can get is G/Edge.... would be KILLER to get it running on 3G/H!!!
I am curious if there any other Fido customers out there that have tried to get the Galaxy tab up and running on the Fido network.
Thanks
Someone else was complaining about the same problem. I sent him through everything I could think of and it's a no-go. The euro tab doesn't like the North America 1900mhz 3g band.
Hmmm..
Is it a firmware issue or modem issue? Or are you saying I have a TAB that is pretty much neutered in North America when it comes to 3G?
Thanks for the reply.
B.B.
He flashed every modem - so it's the chip.
http://forum.xda-developers.com/showthread.php?t=1172540
need help with my p1000 on at&t
sikstiks said:
Hello,
I have a GT-P1000 that I am trying to connect to the Fido network's 3G/H 850/1900 without much success.
I am currently running the Overcome Stock Safe firmware and have gone through a number of modems trying to achieve the networks full potential.
So far all I can get is G/Edge.... would be KILLER to get it running on 3G/H!!!
I am curious if there any other Fido customers out there that have tried to get the Galaxy tab up and running on the Fido network.
Thanks
Click to expand...
Click to collapse
What are your APN values?
ecb5 said:
What are your APN values?
Click to expand...
Click to collapse
I have tried both of these settings:
NAME: Fido Internet
APN: Internet.fido.ca
PROXY: 205.151.11.11
PORT: 8080
USER NAME & PASSWORD: fido
SERVER: (not set)
MMSC: http://mms.fido.ca
MMS PROXY: 205.151.11.13
MMS PORT: (not set)
MCC: 302
MNC: 370
AUTHENTICATION TYPE: (none)
APN Type: Internet + mms
And:
NAME: Fido Internet
APN: Internet.fido.ca
PROXY: (not set)
PORT: (not set)
USER NAME & PASSWORD: fido
SERVER: (not set)
MMSC: (not set)
MMS PROXY: (not set)
MMS PORT: (not set)
MCC: 302
MNC: 370
AUTHENTICATION TYPE: (none)
APN Type: Internet
Sorry i had forgotten about your problem.
I will look into my tab tonight and will let you know of my settings.
WHAT i remember is that i have 2 or 3 different apns
sikstiks said:
I have tried both of these settings:
NAME: Fido Internet
APN: Internet.fido.ca
PROXY: 205.151.11.11
PORT: 8080
USER NAME & PASSWORD: fido
SERVER: (not set)
MMSC: http://mms.fido.ca
MMS PROXY: 205.151.11.13
MMS PORT: (not set)
MCC: 302
MNC: 370
AUTHENTICATION TYPE: (none)
APN Type: Internet + mms
And:
NAME: Fido Internet
APN: Internet.fido.ca
PROXY: (not set)
PORT: (not set)
USER NAME & PASSWORD: fido
SERVER: (not set)
MMSC: (not set)
MMS PROXY: (not set)
MMS PORT: (not set)
MCC: 302
MNC: 370
AUTHENTICATION TYPE: (none)
APN Type: Internet
Click to expand...
Click to collapse
i have one for general, one for internet and one for tethering.
NAME: Fido Default
APN: fido-core-appl1.apn
USER NAME & PASSWORD: fido
MMSC: http://mms.fido.ca
MMS PROXY: 205.151.11.13
MMS PORT: 80
MCC: 302
MNC: 370
AUTHENTICATION TYPE: default,supl,mms
APN Type: Internet + mms
apn protocol: IPv4
NAME: Fido Internet
APN: Internet.fido.ca
PROXY: (not set)
PORT: (not set)
USER NAME & PASSWORD: fido
SERVER: (not set)
MMSC: (not set)
MMS PROXY: (not set)
MMS PORT: (not set)
MCC: 302
MNC: 370
AUTHENTICATION TYPE:
APN Type: default,supl
apn protocol: IPv4
its the first one that is choosed between the three.
Hope this helps
Thank you very much,
It has not made a difference unfortunately... but still digging for a solution.
Much appreciated.
ecb5 said:
Sorry i had forgotten about your problem.
I will look into my tab tonight and will let you know of my settings.
WHAT i remember is that i have 2 or 3 different apns
Click to expand...
Click to collapse
May I ask which modem you are using?
sikstiks said:
May I ask which modem you are using?
Click to expand...
Click to collapse
i can't remember how to check that info... the dial pad?
P1000nubjp3
Thank you
I am very happy to post that I have resolved my issue regarding the lack of connectivity in my region.
It was in fact a modem issue.
I found the solution on this page
http://forum.xda-developers.com/showthread.php?t=847273
I followed the instructions on that thread to test the modem under the ROM prescribed there... it worked on all available bands in my region, and proceeded to use just the modem along with the overcome ROM, and again success.
I am attaching the modem for any other Canadian Fido users encountering this problem. Hope it I can pay it forward.
Thank you again for all you help.
Great support structure here at XDA!!
That's the recommended modem for North America, included in the Team Overcome download. Your baseband will say i9000JK3.
How did you miss that modem when you flashed all the modems in the stickie?
That is the kicker,
I did in fact try the JK3 modem that came with the Overcome download, and it did not function. At all.
I am/was left wondering this myself.
This modem specifically, this time... after going through the process of reverting back to 2.2 from the url in my post...
Worked.
I, in no way claim to understand why. LOL!!
Just thanking for all the great help.
rangercaptain said:
Your baseband will say i9000JK3.
Click to expand...
Click to collapse
The baseband reads:
I9000UGJK3
That's funny. Now if I could remember where I left the car keys . . .
sikstiks said:
I am very happy to post that I have resolved my issue regarding the lack of connectivity in my region.
It was in fact a modem issue.
I found the solution on this page
http://forum.xda-developers.com/showthread.php?t=847273
I followed the instructions on that thread to test the modem under the ROM prescribed there... it worked on all available bands in my region, and proceeded to use just the modem along with the overcome ROM, and again success.
I am attaching the modem for any other Canadian Fido users encountering this problem. Hope it I can pay it forward.
Thank you again for all you help.
Great support structure here at XDA!!
Click to expand...
Click to collapse
Sorry i couldn't help you more...but glad it is resolved.
I have been looking around the web and found the best APN settings I can find that didnt give me a 3G icon but a "H" icon instead, Speed are really 4G cause i did a speedtest and got around 6 Mbps down but this is only for T-mobile US users
Name: T-Mobile US
APN: epc.tmobile.com
Proxy: 216.155.165.050
Port: 8080
Username: (leave this blank)
Password: (leave this blank)
Server: (leave this blank)
MMSC: http://mms.msg.english.t-mobile.com/mms/wapenc
MMS Proxy: 261.155.165.050
MMS Port: 8080
MCC: 310
MNC: 260
APN Type: (leave this blank)
Note* this is for users that are running streakdroid honeycomb
Sent from my streak7 using XDA App
Hm, mine is still only showing the 3G icon, but I am able to get 4.5Mbps down.
I'll give this a shot later. Will the same settings work with the internet2 APN?
Are you in a 4g coverage area?
Sent from my streak7 using XDA App
My 4G LTE data connection wont work and if its a problem with my APN Settings I want to find out the correct settings. I have AT&T and I'm in a LTE area.
tapout1382 said:
My 4G LTE data connection wont work and if its a problem with my APN Settings I want to find out the correct settings. I have AT&T and I'm in a LTE area.
Click to expand...
Click to collapse
Surely at&t has the settings written on there website some where. Search there. Otherwise call them or the store witch you got it from.
Sent from my GT-I9305 using XDA Premium HD app
tapout1382 said:
My 4G LTE data connection wont work and if its a problem with my APN Settings I want to find out the correct settings. I have AT&T and I'm in a LTE area.
Click to expand...
Click to collapse
it tryed If you have 3G Code:
Name: Cingular 410
APN: wap.cingular
Proxy: Blank
Port: Blank
Username: [email protected]
Password: CINGULAR1
Server: cingulargprs.com
MMSC: http://mms.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: Blank
MCC: 310
MNC: 410
Authentication type: Blank
APN Type: default,supl,mms
APN protocol: leave as is
Bearer: leave as is
If you have 4G Code:
Name: AT&T HSPA+
APN: phone
Proxy: Blank
Port: Blank
Username: blank
Password: blank
Server: blank
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: Blank
APN Type: default,supl,mms,hipri
APN protocol: leave as is
Bearer: leave as is
I have similar problems using Telstra in Australia. The phone just don't want to go into LTE mode. I am using Wanam ROM if that has anything to do with it.
I can't seem to find a definite answer from the big devs here, so I'll ask everyone. What works for you?
Sent from my MB886 using xda app-developers app
The one at mmsc.mobile.att.net
Sent from my PACMAN MATRIX HD MAXX
Name: AT&T HSPA+
APN: phone
Proxy: Blank
Port: Blank
Username: blank
Password: blank
Server: blank
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: Blank
APN Type: default,supl,mms,hipri
APN protocol: leave as is
Bearer: leave as is
Sent from my MB886 using xda premium
This works for me, including LTE (If it's not listed, leave it as it is)
Name: ATT LTE
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MOC: 310
MNC: 410
APN Type: default,admin,mms,supl,hipri
TenguSnake said:
This works for me, including LTE (If it's not listed, leave it as it is)
Name: ATT LTE
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MOC: 310
MNC: 410
APN Type: default,admin,mms,supl,hipri
Click to expand...
Click to collapse
This is what I always run
So I tried those last night and I was getting 2g then I kept everything the same except put HSDPA+ instead of lte and that kinda worked . I really like echo's new halo7 ROM but I have to have my data . 1 other question youngguns how do I find my voicemail info so I can put it in my contacts and actually get my voicemail. I have learned a lot from you man , this is my first android ( I had finally figured out WP7 Lol) and I have been able to flash all ROMs except 2 using the photon version of cwm recovery and as bad that anyways lol thanks
Sent from my MB886 using xda app-developers app