Database Develop

[Q] help me please.phone setup wizard force close

i have a rogers canadian captivate.rooted and unlocked.deleated stock tw launcher by mistake and did a hard reset.well on step 4 of the new set up process it says phone setup wizard not responding and askes to force close.and takes me right back to step 1 of set up.i know if i can get to the web and download a launcher than i can open it from notificatio bar. please help.

Can you push stuff through adb?
Sent from my SGH-T959V using XDA App

Juls317 said:
Can you push stuff through adb?
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Since he just factory reset a stock rom, it isnt set to debugging mode, so adb isnt an option...

Good point...hmmmmmm
Sent from my SGH-T959V using XDA App

Because you cant push a launcher or get into any settings menu, my only suggestion would be to flash a new rom. And assuming that the rom you just flashed (being completely stock), you wont have the 3 button combo although I suggest you try it. (Im not sure about the combos for 2.2 roms).
If you cant get into recovery/download through any method, my next suggestion is to buy/build a JIG and force your device into download mode, by which you can use ODIN to flash a rom.
You can make a jig for about a dollar or buy one for about 10. (Best purchase i made). Just take a look around the forums for more info on this.

yes i can get into where it says reboot system now,reinstall packages delete data ya know. not much experiance

and i can still get the usb modes when i plug in usb. kies media player mass storage.just an amature

Not sure if it would work...but odin3 v1.0 had a option for enable debug .could he just do that? Then adb push /system/app/launcher.apk? See pic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SGH-I897 using XDA Premium App

need more suggestions.paid 500 canadian with no contract.might as well of flushed it down the toilet

There is a Canadian Odin one click somewhere. Look harder.

Canadian one click using Heimdall not Odin. Good news is Heimdall is cross platform and can be used on PC, Mac, and Linux. Read the thread and the instructions are in the OP. Good Luck!
Here's the link http://forum.xda-developers.com/showthread.php?t=1191094

So give me the link
Sent from my GT-P1000R using XDA App

I have the heimdall ready and in download mode on captivate.ok where it says load package i hit browse and it takes me to all the files in heimdall but i dont know what to choose.this is how much of an ameture i am.i cant even flash a rom.pleas help me
Sent from my GT-P1000R using XDA App

Canadian odin one click? Need a link.ill try this one also
Sent from my GT-P1000R using XDA App

Can't you bypass phone setup? Maybe this video will help.
http://www.youtube.com/watch?v=L5XjF6sPef4&feature=youtube_gdata_player
Sent from my SAMSUNG-SGH-I896 using XDA App

http://forum.xda-developers.com/showpost.php?p=16098171&postcount=5
That's where the download is for the package for Canadian stock. I am not at my pc to walk you through where the package goes on Heimdall.
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro

thankyou soooooooo much. i decided to try your odin flash and worked very well.i cant believe how easy it was.only problem is i cant connect to samsung kies.but i dont care.who needs it for firmware update when i know how to flash roms now. again thank you.saved me alot of cash

jamesrfraser said:
thankyou soooooooo much. i decided to try your odin flash and worked very well.i cant believe how easy it was.only problem is i cant connect to samsung kies.but i dont care.who needs it for firmware update when i know how to flash roms now. again thank you.saved me alot of cash
Click to expand...
Click to collapse
That's because Kies isn't supported in the US and you don't need it anyway! Glad to hear you're up and running again.

worked great thankyou.except ended up with the at&t version.thats ok.now i know how to flash a rom.thanks again

jamesrfraser said:
worked great thankyou.except ended up with the at&t version.thats ok.now i know how to flash a rom.thanks again
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=16098171&postcount=5
That's the link for the Canadian Stock Heimdall package.
Be careful when flashing ROMS, be certain to read the instructions carefully and read the thread too, usually you will find all the information you need, any problems to expect and how to recover from these problems. Good Luck and happy flashing!

RESOLVED Galaxy note n 7000 stuck on setup connection using odin ???

hey guys need help
1) i was using xxls7 jelly bean leak when i tried to flash new philz kernel device is bricked as i can not run recovery mode screen
gone black nothing happens only charging but flashing all the time & when i connect to download mode sometime it says low battery sometime
it enters in download mode.
2) I can only run download mode but when i tried to flash using odin i was stuck on setup connection every time.I had changed laptops,
changed ports , installed drivers, changed odin versions but still no luck .
3) one thing i also want to say is that in download mode status says that Official Samsung Binary is installed so am i good to go
service center & claim my warranty .
thanks

rraaka said:
its common to get stuck on set up after odin flash,
you just need to get into stock recovery and data wipe and factory reset and reboot
dont do it if you have just flashed an ics rom
with GB its fine
if you are on ics then flash phillz kernel matching with that rom and get into its recovery and do your wipes there and then reboot
Click to expand...
Click to collapse
hello again

rraaka said:
hello again
Click to expand...
Click to collapse
hey rraaka
still stuck there man ...........but tell me one thing that for flashing through odin laptop can be used or not

yes it can be used.
---------- Post added at 09:01 PM ---------- Previous post was at 09:01 PM ----------
what's the count there in odin mode?

nokiamodeln91 said:
yes it can be used.
---------- Post added at 09:01 PM ---------- Previous post was at 09:01 PM ----------
what's the count there in odin mode?
Click to expand...
Click to collapse
i can't enter in download mode due to low battery so can't tell now but last time when i was able to enter in download status was official binary installed so i think i am good to claim warranty .... is am i right ........

CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
for you to claim warranty , you download mode should look like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

nokiamodeln91 said:
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
for you to claim warranty , you download mode should look like this
Click to expand...
Click to collapse
yes damn it is ...........now load off from me after your confirmation ...........

goti(0) said:
hey guys need help
1) i was using xxls7 jelly bean leak when i tried to flash new philz kernel device is bricked as i can not run recovery mode screen
gone black nothing happens only charging but flashing all the time & when i connect to download mode sometime it says low battery sometime
it enters in download mode.
2) I can only run download mode but when i tried to flash using odin i was stuck on setup connection every time.I had changed laptops,
changed ports , installed drivers, changed odin versions but still no luck .
3) one thing i also want to say is that in download mode status says that Official Samsung Binary is installed so am i good to go
service center & claim my warranty .
thanks
Click to expand...
Click to collapse
Borrow a battery(make sure it is enough for you to unbrick your phone) from someone you know and enter download mode.
Hit the thanks button if worked.

donomeoww said:
Borrow a battery(make sure it is enough for you to unbrick your phone) from someone you know and enter download mode.
Hit the thanks button if worked.
Click to expand...
Click to collapse
ya you are right but i have been using every instruction from guides but nothing working as it is stuck on setup connection after using many ver of odin

Did you change cables? Sometimes generic cables are a problem. Even an original cable may be the problem. Worth a shot.

goti(0) said:
ya you are right but i have been using every instruction from guides but nothing working as it is stuck on setup connection after using many ver of odin
Click to expand...
Click to collapse
wasnt sure what you meant by set up , thought you meant rom set up page on mobile after successful flashing in odin....
so your ID:Com in odin doesnt turn yellow after connecting mobile !
hope you got it sorted

hkgrob said:
Did you change cables? Sometimes generic cables are a problem. Even an original cable may be the problem. Worth a shot.
Click to expand...
Click to collapse
yes i did no luck ...........

you could try with heimdall instead of odin ?
Also check your usb port in the note, l
maybe it is just dirty or faulty....

why does you post say resolved?

because the issue was resolved as my friend has someone known in Samsung Centre so he took care of it.... I don't how but he saved my device.
Sent from my GT-N7000 using xda app-developers app

[Q] Help Samsung anycall logo stuck screen

Hi,
I recently upgraded my os from gb to jb.
Now for some reason the samsung anycall logo is appearing on the screen. This is the same logo that appears before download mode. I have cmw mod installed.
I let the battery discharge, and tried to reboot, and the same logo appears and freezes.
I tried using odin, and my phone was not detected.
Any advice please?
Thanks

jdnsx said:
Hi,
I recently upgraded my os from gb to jb.
Now for some reason the samsung anycall logo is appearing on the screen. This is the same logo that appears before download mode. I have cmw mod installed.
I let the battery discharge, and tried to reboot, and the same logo appears and freezes.
I tried using odin, and my phone was not detected.
Any advice please?
Thanks
Click to expand...
Click to collapse
Can you boot into Download Mode/Recovery Mode?
If so, try reflashing the ROM.
If not, your phone may be soft-bricked.

educk said:
Can you boot into Download Mode/Recovery Mode?
If so, try reflashing the ROM.
If not, your phone may be soft-bricked.
Click to expand...
Click to collapse
No, Download mode does not work using the three button method.
I have a feeling it is soft bricked.
I bought a micro USB jig off ebay, so I hope that will fix the issue of enabling the phone into download mode when it arrives next week.
Any other recommendations?

jdnsx said:
No, Download mode does not work using the three button method.
I have a feeling it is soft bricked.
I bought a micro USB jig off ebay, so I hope that will fix the issue of enabling the phone into download mode when it arrives next week.
Any other recommendations?
Click to expand...
Click to collapse
No, if you can't get into download mode your phone is soft bricked, you did well that you ordered that jig, use it and boot into download mode and then flash back the stock firmware using odin (you will find instructions of how to do this on the forum or wiki page) than you may try to flash custom ROM again but be careful this time.
Sent from my GT-I9001 using xda app-developers app

jdnsx said:
No, Download mode does not work using the three button method.
I have a feeling it is soft bricked.
I bought a micro USB jig off ebay, so I hope that will fix the issue of enabling the phone into download mode when it arrives next week.
Any other recommendations?
Click to expand...
Click to collapse
I'm facing the exact same prob...did the usb jig work for you?????????

CodexRobin said:
I'm facing the exact same prob...did the usb jig work for you?????????
Click to expand...
Click to collapse
What is your Phone model? if its Anycall M110S, its not the same as i9000, so download/recovery mode combo keys will not be the same. if you have problem getting download or recovery mode you can try various methods mentioned here
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​

xsenman said:
What is your Phone model? if its Anycall M110S, its not the same as i9000, so download/recovery mode combo keys will not be the same. if you have problem getting download or recovery mode you can try various methods mentioned here
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​
Click to expand...
Click to collapse
Thanks dude. I have 5 tabs of topics all from you. Working to save this already half-dead phone. Thanks alot. Your work is amazing.

new user :s

hello friends i bought recently a new phone the SGS I9000 it was so wonderfull to own that phone with the speed and the ram ... but i was searching for a new rom with better performances and tweaks apps ... i tryed to flash it with odin it took to much time so i was afraid i disconect it from the usb and then i brocke it when i tryed to launch it a screen with phone conected to pc and a warning i tryed again with a stock firmware i wait up to an hour and half and i worried about it so i pluged it out from the usb now my problem i got a SGS I9000 wont start doesn't go to recovery even download mod and even it can't show any thing :'( simpally it doesn't start up please can someone help me please !! i need an answer sooon help guys please :'(

Make sure ur device is i9000 or variant or SHW M110s (korean) (this is important)
if i9000, choose ur region stock ROM here :http://forum.xda-developers.com/showthread.php?p=25785588
learn how to flash here : http://forum.xda-developers.com/showthread.php?t=1284588
if SHW M110s, see here : http://forum.xda-developers.com/showthread.php?t=1856992

compacity said:
Make sure ur device is i9000 or variant or SHW M110s (korean) (this is important)
if i9000, choose ur region stock ROM here :http://forum.xda-developers.com/showthread.php?p=25785588
learn how to flash here : http://forum.xda-developers.com/showthread.php?t=1284588
if SHW M110s, see here : http://forum.xda-developers.com/showthread.php?t=1856992
Click to expand...
Click to collapse
@Senior member i'm from algeria i can't find the rom on the threat given and you didn't understood my question i said my galaxy s wont boot wont start up won't go to download or recovery mod !!! please help it has becone a serious problem

http://forum.xda-developers.com/showthread.php?t=819551,
http://forum.xda-developers.com/showthread.php?t=1330491
hi, actually i m quite understand ur problem n thats why i need to make u sure ur know ur one variant as sometimes its doesnt always 3 combo button to boot download mode for certain variant.
anyway if it doesnt boot up, u can try jig, see link above n read carefully
da first link is for jig to boot up download mode n second link to revive ur i9000 as from ur post before, it seems that u successfully bricked ur fone really hard
but both link need some skill in soldering n modifying component.

okay @Senior Member well please tell me another [Q] well i am sure i did a wrong step when i took off the usb cable while flashing with odin but my question is does that hurt to the phone or just the micro system !! i mean it can't breaks a part of the phone like the processor or something like that !! does the step i did burn something ! because i saw in the 2nd link that he opened the phone and reassamble it again and i wont get to that step !! please help

aek-tiesto said:
okay @Senior Member well please tell me another [Q] well i am sure i did a wrong step when i took off the usb cable while flashing with odin but my question is does that hurt to the phone or just the micro system !! i mean it can't breaks a part of the phone like the processor or something like that !! does the step i did burn something ! because i saw in the 2nd link that he opened the phone and reassamble it again and i wont get to that step !! please help
Click to expand...
Click to collapse
Hey,
Okay, well, what exactly happened when you first tried to flash through Odin? Did it hang at one stage or was it just going really slowly?
Disconnecting the phone halfway through flashing can brick the phone. It doesn't break any of the hardware but it does break the system and the software. As compacity said, use a USB jig.
Sent from my GT-P7510 using Tapatalk HD

well i flashed the first time with a file called ''Tornado_Aureus_Gold.tar'' that i found in youtube it used for a theme ... and odin said complete when i disconnected my phone and restart it it gave me the screen of connect to pc
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and then i followed some tuto's from the web they said i should install a stock firmware and i downloaded the firmware walled ""I9000XWJVZ_I9000OXAJVT_OXA"" it contains such files :
--APBOOT_I9000XWJVZ_CL762604_REV03_user_low_ship.tar.md5
--CODE_I9000XWJVZ_CL762604_REV03_user_low_ship.tar.md5
--GT-I9000-CSC-HOME-MULTI-OXAJVT.tar.md5
--MODEM_I9000XXJVT_REV_00_CL1064602.tar.md5
--s1_odin_20100512.pit
i used all of them just the first one APBOOT ... because it wasn't montioned in the tuto so i clicked start after odin said '' added '' and i waited about an hours and 30mins then i searched in the web and i found that the flash with odin takes only 15mins so i thought i was doing a wrong steps !! so i disconnected the phone after closed the odin ......
when i disconnected the phone it was in the download screen with a yellow triangle ... i rebooted the phone and it doesn't respond :'( till now i tried many ways puting the phone in the charging mode and take off the battery and put it again ..... but noghting is working !! :'( i am waiting to make a jig and then trying the jig Method i hope it works please @Senior help !:!
the connect to pc screen >>> http://farm5.staticflickr.com/4133/5208900936_a0288b11c3_z.jpg

Need to do jig for that
see here for instruction and information
http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series#Recovery_Mode
and here for video
http://www.youtube.com/watch?v=GjDkShT-65Y
and really, please read first before doing and try to do it first before mumbling.

yes @Senior thanx for those links but the one of the video when he tried the three bottom combination he didn't gone on download mode but his phone started note that mine don't even starts up !! do you think the jig will be helpfull !!

http://forum.xda-developers.com/showpost.php?p=30415128&postcount=1
see under problem 25 and if jig doesnt help and this is da only way

i tried that under ubuntu but it didn't recognized the device !!

seriously i got no other solution except UnBrickable Mod
Sorry

[Q] Bricked my Samsung Galaxy S

Hi there,
I wanted to root my I9000 and flashed my phone using Odin, and found later in a thread that the guy posted a I9100 in stead of a I9000 kernel
now my phone is completly dead, it doesn't react on anything.
3-button combination, or removing the battery
and all combinations of this, nothing
I can't get it in to recovery or download mode
no icons on the screen...NOTHING
plugging in the USB cable doesn't show anything on the screen
plugging in the adapter doesn't show anything on the screen
Odin doesn't recognize it, and adb also not
my PC doesn't recognize it too
My battery might be dead, as it was low when I started the flashing (Stupid, I know)
Should it charge without any operating system on it?
it gets hot when charging , that's the only sign of life so far
Please help me,
Thanks

Daniel_Kool said:
3-button combination, or removing the battery
and all combinations of this, nothing
Click to expand...
Click to collapse
Hmmmm, maybe you really killed it....
Did you try this:
remove the battery
keep power button pressed for about 1min (without battery)
put battery back and press these buttons in this order: Volume Down + Home (Menu) + Power Button (keep them pressed then)
Something happened?

Daniel_Kool said:
My battery might be dead, as it was low when I started the flashing (Stupid, I know)
Should it charge without any operating system on it?
Click to expand...
Click to collapse
sadly you have hard bricked your phone by NOT charging it at least 50% before flashing . USB JIG might not solve it but no harm trying.
Your only possible option IF you want to try recovering it by yourself is , look at My Android Solutions (link below) probelm No 25, this involves some technical workmanship, or take it to your nearest phone repair shop to have it flashed with a Riffbox and Jtag connection.
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​

xsenman said:
sadly you have hard bricked your phone by NOT charging it at least 50% before flashing . USB JIG might not solve it but no harm trying.
Your only possible option IF you want to try recovering it by yourself is , look at My Android Solutions (link below) probelm No 25, this involves some technical workmanship, or take it to your nearest phone repair shop to have it flashed with a Riffbox and Jtag connection.
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.​
Click to expand...
Click to collapse
Thanks
I will try a JIG first (only 3Euro), then I will try to get UBUNTU on a PC of mine (Not a Linux user)
or else I will go to a repair guy for a JTAG repair :good:

Daniel_Kool said:
Thanks
I will try a JIG first (only 3Euro), then I will try to get UBUNTU on a PC of mine (Not a Linux user)
or else I will go to a repair guy for a JTAG repair :good:
Click to expand...
Click to collapse
You won't need ubuntu. If the jig awakes and turns your i9000 into download mode, you will probably be able to revive it by "normal" unbricking, just using PC and Odin. Check my post of last 2 days, I've sent step-by-step guide to several people who following that way successfully unbricked their i9000s (with stock rom out of 3 files and pit file)
______________________________________
Sent from GT-P5110 powered by CM 10.2