Does anyone else have a problem where the screen stays on and it pushes stuff while you talk? It only turns off when something is right on it touching it (tested with my finger) tried an app in the play store and the sensor goes from 9 to 0 right away it can't detect the distance
Sent from my Vivid 4G using Tapatalk 2
hmm nobody has this problem? never had a problem when i had ics
ZeRo2o9 said:
hmm nobody has this problem? never had a problem when i had ics
Click to expand...
Click to collapse
I have this issue yes.
RujinXERO said:
I have this issue yes.
Click to expand...
Click to collapse
oh ok then maybe it is just a jellybean problem
Did you put it on the issue tracker?
Sent from my Vivid 4G using Tapatalk 2
rignfool said:
Did you put it on the issue tracker?
Sent from my Vivid 4G using Tapatalk 2
Click to expand...
Click to collapse
Not yet I'm at work I'll do it later
Sent from my Vivid 4G using Tapatalk 2
I've had this same problem not just with PAC but with a couple other roms. No sense rom had this problem.
molem1071 said:
I've had this same problem not just with PAC but with a couple other roms. No sense rom had this problem.
Click to expand...
Click to collapse
Yea me too
Sent from my Vivid 4G using Tapatalk 2
By the way guys, as I mentioned in another thread, our phones prox sensor only supports ON or OFF. So using that playstore app, only 9 or 0.
It does not report the distance under any ROM.
It might be that the sensitivity for the different models needs changed though. There is a config file in /proc that you can monkey with to change the "near" and "far" thresholds. There was a thread on it for the sensation or something from a while back. Should work for us too.
Personally, I think the prox sensor is working fine on my phone running either CM10 or PAC 19. I have a Canadian Raider from Rogers, so not the AT&T hardware. Maybe they're different somehow.
ess.boyer said:
By the way guys, as I mentioned in another thread, our phones prox sensor only supports ON or OFF. So using that playstore app, only 9 or 0.
It does not report the distance under any ROM.
It might be that the sensitivity for the different models needs changed though. There is a config file in /proc that you can monkey with to change the "near" and "far" thresholds. There was a thread on it for the sensation or something from a while back. Should work for us too.
Personally, I think the prox sensor is working fine on my phone running either CM10 or PAC 19. I have a Canadian Raider from Rogers, so not the AT&T hardware. Maybe they're different somehow.
Click to expand...
Click to collapse
Great info thanks for that. Just seems like I always press numbers while talking on the phone
Sent from my Vivid 4G using Tapatalk 2
ess.boyer said:
By the way guys, as I mentioned in another thread, our phones prox sensor only supports ON or OFF. So using that playstore app, only 9 or 0.
It does not report the distance under any ROM.
It might be that the sensitivity for the different models needs changed though. There is a config file in /proc that you can monkey with to change the "near" and "far" thresholds. There was a thread on it for the sensation or something from a while back. Should work for us too.
Personally, I think the prox sensor is working fine on my phone running either CM10 or PAC 19. I have a Canadian Raider from Rogers, so not the AT&T hardware. Maybe they're different somehow.
Click to expand...
Click to collapse
I'm using an ATT Vivid, and have no issues with the prox sensor on CM or PAC. I was messing with it the last few days trying to get it to act up, and it was doing nothing but what it was supposed to
Related
Been using Niks ROMs for ever now, but on the last few my wifi keeps either disconnecting or turning off, sometimes even when I'm using it and flips to data. Is this the ROM, the radio or my router? Is there a new radio out at the moment worth a try? I'm using 11.08.29 M. Anyone else having the same problem?
Sent from my HTC Incredible S using XDA
VaderXI said:
Been using Niks ROMs for ever now, but on the last few my wifi keeps either disconnecting or turning off, sometimes even when I'm using it and flips to data. Is this the ROM, the radio or my router? Is there a new radio out at the moment worth a try? I'm using 11.08.29 M. Anyone else having the same problem?
Sent from my HTC Incredible S using XDA
Click to expand...
Click to collapse
I've been using the newer 14_M radio since this morning. So far so good. No cutouts or disconnects as of yet.
VaderXI said:
Been using Niks ROMs for ever now, but on the last few my wifi keeps either disconnecting or turning off, sometimes even when I'm using it and flips to data. Is this the ROM, the radio or my router? Is there a new radio out at the moment worth a try? I'm using 11.08.29 M. Anyone else having the same problem?
Sent from my HTC Incredible S using XDA
Click to expand...
Click to collapse
I think there is another user who has posted in the general section with a similar problem.
you'll need to work around the power options as it may be set to switch off wifi/data after a certain duration of time or when screen off
I've also read that disabling fastboot may also help.
acme anvil said:
I've been using the newer 14_M radio since this morning. So far so good. No cutouts or disconnects as of yet.
Click to expand...
Click to collapse
Do you know where I can get the newer radio? The radio thread never seems to get updated. Cheers
Chk your PM
Is there a kernel for the Sprint variant that allows you to enable the back and home button to light up when notifications come through phone? I know there's one for the GSM version but haven't seen one for CDMA version yet.
Wrong section should be Q&A
As for your question I don't think so ATM
stunu12 said:
Is there a kernel for the Sprint variant that allows you to enable the back and home button to light up when notifications come through phone? I know there's one for the GSM version but haven't seen one for CDMA version yet.
Click to expand...
Click to collapse
I don't know what the app is called, but there is an app for that. I read a review and someone wanted the same thing, and they found it, but I can't find the review.
Sent from my SPH-D710 using Tapatalk 2
H4rryTipp3r said:
I don't know what the app is called, but there is an app for that. I read a review and someone wanted the same thing, and they found it, but I can't find the review.
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
Its called bln
Sent from my SCH-I605 using Tapatalk 2
stunu12 said:
Is there a kernel for the Sprint variant that allows you to enable the back and home button to light up when notifications come through phone? I know there's one for the GSM version but haven't seen one for CDMA version yet.
Click to expand...
Click to collapse
Faux's kernel does this, no? You may need his app to turn it on though.
EDIT: 2.9.2 is now available which should fix roam control not working after the MJA update.
There is a brief delay before it roams so give it a change to do its thing.
MrGreg has released Roam Control 2.9.1 which adds support for our Galaxy S4.
What does this mean?
for those of you who have bad data or coverage you can pair this up with an appropriate PRL and get better voice / data coverage!
Here is a LINK to the website where you can get the app.
Please be sure to click HERE and find a thread to thank MrGreg in as he is usually inactive on XDA.
Enjoy!
dtr145r said:
It's a great day for us who live in bad coverage / data areas.
MrGreg has released Roam Control 2.9.0 which adds support for our Galaxy S4.
What does this mean?
for those of you who have bad data or coverage you can pair this up with an appropriate PRL and get better voice / data coverage!
Here is a LINK to the website where you can get the app.
Please be sure to click HERE and fine a thread to thank MrGreg in as he is usually inactive on XDA.
Enjoy!
Click to expand...
Click to collapse
Thank you SO much for this update. You made my freakn day!! Verizon has full bars LTE on my block, where as Sprint literally doesn't have any service what so ever, I roam on Verizon 95% of the time (but I have an AirRave at the house, but before the AirRave that is what would happen!). But also even 5-10 minutes outside of my block I get horrible service. I bought Roam Control on my GS3 and now I get to use it on my GS4 too, thank God!!!!!!!!!!!!!!
Still not working here. It gets su and does nothing. Stock rooted MDL with newest ktoonz Kernel.
Edit. Reboot and works like a champ
besides its stuck on roaming even after mdc back to stock??
Well I had to use the dialer code to re activate my phone so wierd. Any one else have this issue?
Does not work for me. Switching does abolutely nothing.
miketucky350 said:
Still not working here. It gets su and does nothing. Stock rooted MDL with newest ktoonz Kernel.
Edit. Reboot and works like a champ
besides its stuck on roaming even after mdc back to stock??
Well I had to use the dialer code to re activate my phone so wierd. Any one else have this issue?
Click to expand...
Click to collapse
that happened to me when it was first released for the GS3. im sure their will be a release to fix that.
sputnik767 said:
Does not work for me. Switching does abolutely nothing.
Click to expand...
Click to collapse
same for me. im running the latest cm.1 nightly.
i havent tried a tw rom yet.
miketucky350 said:
Still not working here. It gets su and does nothing. Stock rooted MDL with newest ktoonz Kernel.
Edit. Reboot and works like a champ
besides its stuck on roaming even after mdc back to stock??
Well I had to use the dialer code to re activate my phone so wierd. Any one else have this issue?
Click to expand...
Click to collapse
Yup same thing here.
No dice for me either. CM10.1 latest nightly.
Sent from my SPH-L720 using xda app-developers app
No worky on Forcerom either.
SGS4 Sent
I want this to work sooo bad. Its the only thing I'm missing.
Sent from my SPH-L720 using xda app-developers app
Joe0113 said:
Yup same thing here.
Click to expand...
Click to collapse
I wonder is it's sprint detecting force roam and booting phone off? It sucked after ref lash and still no signal. I checked imei lol. O well took 2 minutes to fix.
Sent from my SPH-L720 using Tapatalk 2
sputnik767 said:
Does not work for me. Switching does abolutely nothing.
Click to expand...
Click to collapse
Yup. Nothing at all. No change after a reboot either. I emailed the dev, hopefully I get a quick response.
Sent from my SPH-L720 using xda premium
miketucky350 said:
I wonder is it's sprint detecting force roam and booting phone off? It sucked after ref lash and still no signal. I checked imei lol. O well took 2 minutes to fix.
Sent from my SPH-L720 using Tapatalk 2
Click to expand...
Click to collapse
Well the force roam worked... obviously lol, it was just stuck there no matter what I did! I hadda re-activate my phone using the dialer code. Simple fix, guess I'll deal with that for now, like you said, it's a simple 2 minute fix.
Joe0113 said:
Well the force roam worked... obviously lol, it was just stuck there no matter what I did! I hadda re-activate my phone using the dialer code. Simple fix, guess I'll deal with that for now, like you said, it's a simple 2 minute fix.
Click to expand...
Click to collapse
Ya that's for sure Lol. O well at least we tested and the rest of the community is aware. That's what xda is about.
Sent from my SPH-L720 using Tapatalk 2
I wish worked with aosp ROMs.
Edit: It does stick with aosp ROMs. I'm a dunce.
Sent from my SPH-L720 using xda app-developers app
miketucky350 said:
Still not working here. It gets su and does nothing. Stock rooted MDL with newest ktoonz Kernel.
Edit. Reboot and works like a champ
besides its stuck on roaming even after mdc back to stock??
Well I had to use the dialer code to re activate my phone so wierd. Any one else have this issue?
Click to expand...
Click to collapse
What's the dialer code? My phone is stuck.
illdini said:
What's the dialer code? My phone is stuck.
Click to expand...
Click to collapse
Its on my laptop I'll edit this post with it when I get home in 5 minutes.
##72786#
Device will reboot and fix it self.
I messaged op so he can put this in it until app is fixed
Sent from my SPH-L720 using Tapatalk 2
miketucky350 said:
Its on my laptop I'll edit this post with it when I get home in 5 minutes.
Sent from my SPH-L720 using Tapatalk 2
Click to expand...
Click to collapse
##72rtn#
Sent from my SPH-L720 using xda premium
Op updated.
Sent from my SPH-L720 using Tapatalk 2
I believe people are having problems with the mdl and above firmware update. The mdc firmware was the one that you could easily rewrite the prl if I remember correctly. I am going to try rolling back to mdc then test roam control and see where I get.
brendan802 said:
I believe people are having problems with the mdl and above firmware update. The mdc firmware was the one that you could easily rewrite the prl if I remember correctly. I am going to try rolling back to mdc then test roam control and see where I get.
Click to expand...
Click to collapse
Wonder what's gonna happen on MF9.
Howdy
When I answer my ONE, I gotta say hello at least twice, sometimes three times before the caller can hear me.
Anyone have any thoughts about this. I am running D3RP 1.ROM
After reading this I realized it happens to me too. Running stock rooted.
Sent from my HTCONE using xda app-developers app
I get the same thing
Sent from the only '' ONE ''
musicman625 said:
Howdy
When I answer my ONE, I gotta say hello at least twice, sometimes three times before the caller can hear me.
Anyone have any thoughts about this. I am running D3RP 1.ROM
Click to expand...
Click to collapse
bleichtman said:
After reading this I realized it happens to me too. Running stock rooted.
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
budeone said:
I get the same thing
Sent from the only '' ONE ''
Click to expand...
Click to collapse
I am willing to bet you are all using google voice. This is a typical symptom of google voice users. From my experience it has to do with voice settings, but it might not be the case. It depends on a combination of things.
Seems as though it is probably happening to all of us on 1.31 being the first update that has HD Voice which, I am guessing, is why we have that issue... Just have to get it working flawlessly now type thing since it is finally here
Sent from my HTCONE using Tapatalk 4
A lot of evo lte users had the same issue. It seems to be a semicommon HTC issues. Most likely due to HD voice and/or two mics. Something isn't kicking in properly. We've been able to fix the issue with a reset. But there have been rare cases that didn't solve the issue so had the phone replaced. But a reset usually fixed the issue. Also having lte on caused it for some. Switching it to just cdma fixed it for some. Luckily we aren't having data issues. A lot if evo lte owners can't even use the data and has serious call issues when lte/cdma is turned on. Hope this helps
Edit: I should add that you should try turning lte off first before attempting anything else lol. That is a more widespread issue right now
Sent from my HTCONE using XDA Premium 4 mobile app
mine does this also, I always get the response after second hello. I have gotten so used to it now I don't even notice it. never even thought about it as a technical issue. http://forum.xda-developers.com/images/smilies/eek.gif
Was curious if anyone running lollipop gpe would want to test a potential fix/work around for phantom voicemail as its worked for me so far
tjeeeeee said:
Was curious if anyone running lollipop gpe would want to test a potential fix/work around for phantom voicemail as its worked for me so far
Click to expand...
Click to collapse
I just block it with hangouts or messenger.
If your talking about the 9016 or whatever that's easy I meant the notification that continuously pops up
tjeeeeee said:
If your talking about the 9016 or whatever that's easy I meant the notification that continuously pops up
Click to expand...
Click to collapse
Oh, I don't get that. Running dh gpe with Sprint vvm installed and working. No vvm phantom vm here (thankfully not yet anyways).
pmacevad said:
Oh, I don't get that. Running dh gpe with Sprint vvm installed and working. No vvm phantom vm here (thankfully not yet anyways).
Click to expand...
Click to collapse
I was getting it, I don't since I've applied a temp kind of fix that has stopped the notification and I know I'm not the only one experiencing it
I'll test it out but it might be a day or 2. I was going to do the same thing but I haven't got around to rummaging through smali and xmls...
Sent from my 831C using Tapatalk
gunfromsako said:
I'll test it out but it might be a day or 2. I was going to do the same thing but I haven't got around to rummaging through smali and xmls...
Sent from my 831C using Tapatalk
Click to expand...
Click to collapse
Yeah it's a teleservice.apk that I edited and haven't seen the notification since
https://docs.google.com/file/d/0B1KrqT9hFsfYZncyTzBSM1hXb0k/edit?usp=docslist_api
Just change permissions and replace then reboot.(the usual lol)
Smali?
?
Sent from my 831C using Tapatalk
gunfromsako said:
Smali?
?
Sent from my 831C using Tapatalk
Click to expand...
Click to collapse
Yup saw the edit in a other thread and tried it out for digitals gpe and haven't had the issue since I've used it keep it for whenever I run gpe now since I'm an unfortunate soul who has the phantom voicemail and can't swap phones thanks to Sprint easy pay
Yeah that was the main reason I left that rom... So annoying. And I've been so busy during the holidays that I've never attempted to solve it.
Sent from my 831C using Tapatalk
gunfromsako said:
Yeah that was the main reason I left that rom... So annoying. And I've been so busy during the holidays that I've never attempted to solve it.
Sent from my 831C using Tapatalk
Click to expand...
Click to collapse
I've actually had it since early December I just didn't think it worked but I think I kept forgetting to reboot it and I was flashing too frequently so I could never remember if it was applied or not digital is gonna implement it if someone else confirms its working
This seems to work for me. I tested incoming and outgoing calls and all is well so far. Running DH's latest. Thanks! That icon was such a pain...
Yeah this has worked for me. Thanks! I'm using skydragon gpe on at&t.