[Q] 3G Not Working - RAZR i Q&A, Help & Troubleshooting

Hi guys!
I have a problem with my Razr i... The 3g not working because i changed the room from Telcel Mexico (871.110.13009.XT890.AmericaMovil.en.MX) to [DeOdexed ROM] 81.5.31002 Retail Great Britain... Any suggestion???
thanks!

adrixnac said:
Hi guys!
I have a problem with my Razr i... The 3g not working because i changed the room from Telcel Mexico (871.110.13009.XT890.AmericaMovil.en.MX) to [DeOdexed ROM] 81.5.31002 Retail Great Britain... Any suggestion???
thanks!
Click to expand...
Click to collapse
It probably only has APNs for British carriers.
Just use an app like Tweakker to configure your mobile internet.
http://play.google.com/store/apps/details?id=com.tweakker

Not working
yuripg1 said:
It probably only has APNs for British carriers.
Just use an app like Tweakker to configure your mobile internet.
Thaks! but with this not working too... i think that there are a problem with the drivers of wirless, because the Blouethoot not working too, only the wifi...
Click to expand...
Click to collapse

Hi,
I have the Telcel version too. I installed the stock brazilian Retail (carrier-free) ROM and it's working with Iusacell at least, haven't tried with the Telcel sim card... I'm getting HSPA connection, but right now download speeds are slow, will see what I can do about it...

Related

[MOD] Retail Brazil Radio (by request) AT&T Atrix only

Recently I played with radios a bit.
I tought the retail Brazil radio would work perfectly in my zone, but I was wrong.
I lost internet access with it.
The 4.2.1.1 radio kills the signal strength and also the internet connectivity.
Then the Telstra 4.1.4.2 radio. It works well, but the phone heats a lot. Also there's occasions where you loose the signal completely then in a few seconds you have full signal again. And sometimes you loose internet connectivity for a few seconds or until you reboot the phone.
Actually I'm back at the 4.1.8.3 radio.
Josuetenista asked me to upload the retail Brazil radio so he can try it.
To anyone willing to test it on an AT&T Atrix, be advised this will kill your internet connectivity. Phone will show 3G but won't send nor receive data.
I've included the 4.1.8.3 radio so you can return the phone to its original state.
These SBFs are for AT&T phones only.
You can download them HERE.
Hi Whipon, would you like to upload all the Radios for the At&t Atrix? Currently I'm at Capital Federal (Movistar, carrier) and constantly loosing signal and H+ connectivity all the time, so I would like to mess with these radios a little bit.
Sent from my MB860 using XDA Premium App
guidojusto said:
Hi Whipon, would you like to upload all the Radios for the At&t Atrix? Currently I'm at Capital Federal (Movistar, carrier) and constantly loosing signal and H+ connectivity all the time, so I would like to mess with these radios a little bit.
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
I see. So I'm not the only one not having HSPA in Argentina.
I only have the Retail Brazil and the Telstra one that dew.man uploaded some time ago.
The 4.2.1.1 radio kills the signal almost completely, so I deleted it. I can rebuild it if you want, but I don't see the point.
Currently the best radio seems to be the 4.1.8.3 one.
I hope this HSPA issue will be solved with Gingerbread.
What other radio do you want?. I can make you one with the Claro Brasil radio.
Whipon said:
Recently I played with radios a bit.
I tought the retail Brazil radio would work perfectly in my zone, but I was wrong.
I lost internet access with it.
The 4.2.1.1 radio kills the signal strength and also the internet connectivity.
Then the Telstra 4.1.4.2 radio. It works well, but the phone heats a lot. Also there's occasions where you loose the signal completely then in a few seconds you have full signal again. And sometimes you loose internet connectivity for a few seconds or until you reboot the phone.
Actually I'm back at the 4.1.8.3 radio.
Josuetenista asked me to upload the retail Brazil radio so he can try it.
To anyone willing to test it on an AT&T Atrix, be advised this will kill your internet connectivity. Phone will show 3G but won't send nor receive data.
I've included the 4.1.8.3 radio so you can return the phone to its original state.
These SBFs are for AT&T phones only.
You can download them HERE.
Click to expand...
Click to collapse
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.
josuetenista said:
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.
Click to expand...
Click to collapse
I never thought I'd see another Ecuadorian here in the Atrix forum :O... nice to meet you josuetenista
josuetenista said:
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.
Click to expand...
Click to collapse
Are you on Movistar or Claro, I'm on Claro, I'm not any having problems at all with 4.1.83
Hello,
I have a question, why are you guys talking about the different radios and post System Versions instead of Baseband versions?
Baseband means Radios and heres an example of different baseband version numbers:
N_01.87.00R
N_01.77.15P
N_01.77.07P
Etc...
Just curious...
Sent from my Atrix using Tapatalk
Rayan said:
Hello,
I have a question, why are you guys talking about the different radios and post System Versions instead of Baseband versions?
Baseband means Radios and heres an example of different baseband version numbers:
N_01.87.00R
N_01.77.15P
N_01.77.07P
Etc...
Just curious...
Sent from my Atrix using Tapatalk
Click to expand...
Click to collapse
Each System version comes with a specific Radio and instead of writting down the diferent Modem version I wrote the System Version. My BAD!
Tried all diferent radios
N_01.87.00R
N_01.77.15P
N_01.77.07P
also tried Brazilian Claro and Bell radios and doesn't seem to get better. Signal drops sometimes in conclusion SIM card seems to be broken
jorge_moran_jams said:
I never thought I'd see another Ecuadorian here in the Atrix forum :O... nice to meet you josuetenista
Click to expand...
Click to collapse
I'm on Claro but the problem started 1 week ago, dropped calls, very poor signal and internet connectivity very slow. I think I screwed my SIM Card because I uploaded 11000 songs to Google Music through the Phone's Tether (About 30gb) and the SIM card overheated
jorge_moran_jams said:
Are you on Movistar or Claro, I'm on Claro, I'm not any having problems at all with 4.1.83
Click to expand...
Click to collapse
I'm on Claro but the problem started 1 week ago, dropped calls, very poor signal and internet connectivity very slow. I think I screwed my SIM Card because I uploaded 11000 songs to Google Music through the Phone's Tether (About 30gb) and the SIM card overheated
josuetenista said:
Thanks Whipon. I will try it and let you know how the radio works here in ecuador. Im still having lot of problems with the 4.1.83 Radio. The best radio so far is the 4.1.57 Radio, but I tried to use that radio with the latest firmware and it doesn't have internet connectivity, that's why im stuck on the 4.1.57 update.
Click to expand...
Click to collapse
I have the same problem with 4.1.83 dropping calls in Personal Argentina. 4.1.57 was the best I think.
Guys, Don't get me wrong but I really think that it would be more helpful if you talk about radio versions by using baseband numbers instead of system version numbers.
Saying that you are on X system version does not necessary imply you are on Y radio version.
For example, I'm on system version 4.1.83 but my radio or baseband is N_01.88.00R which is not standard for my system version.
I'm just saying...
Thanks!
Sent from my Atrix using Tapatalk
http://forum.xda-developers.com/showthread.php?t=1071557
Try this one out, it works good for me in Bell Canada
Rayan said:
Guys, Don't get me wrong but I really think that it would be more helpful if you talk about radio versions by using baseband numbers instead of system version numbers.
Saying that you are on X system version does not necessary imply you are on Y radio version.
For example, I'm on system version 4.1.83 but my radio or baseband is N_01.88.00R which is not standard for my system version.
I'm just saying...
Thanks!
Sent from my Atrix using Tapatalk
Click to expand...
Click to collapse
If I for example, say I'm using the 4.1.8.3 radio, that means I'm using the stock radio of that firmware. Its obvious. Build numbers are easier to remember.
ytwytw said:
http://forum.xda-developers.com/showthread.php?t=1071557
Try this one out, it works good for me in Bell Canada
Click to expand...
Click to collapse
That SBF its not compatible with AT&T Atrix.
Also that radio kills internet and signal strength on AT&T Atrix.
Whipon said:
That SBF its not compatible with AT&T Atrix.
Also that radio kills internet and signal strength on AT&T Atrix.
Click to expand...
Click to collapse
Better talk about the baseband version instead of firmware version...
cuz flashing sfb is not necessary to change the baseband version
and this radio is working perfectly on ATT Atrix and its HSUPA enabled...
Tested by lots ppl on xda, I guess there might be sth wrong with your provider instead of the phone...
alex_herrero said:
I have the same problem with 4.1.83 dropping calls in Personal Argentina. 4.1.57 was the best I think.
Click to expand...
Click to collapse
I will try changing the sim card because it looks a little old and haven't changed it for 4 years. Maybe it's time and also it's my last option
Enviado desde mi MB860 usando XDA Premium App
ytwytw said:
Better talk about the baseband version instead of firmware version...
cuz flashing sfb is not necessary to change the baseband version
and this radio is working perfectly on ATT Atrix and its HSUPA enabled...
Tested by lots ppl on xda, I guess there might be sth wrong with your provider instead of the phone...
Click to expand...
Click to collapse
Exactly, thats what I've been saying for the last three posts, but some ppl just dont get it.
Thats a good point by the way!
Sent from my Atrix using Tapatalk
ytwytw said:
Better talk about the baseband version instead of firmware version...
cuz flashing sfb is not necessary to change the baseband version
Click to expand...
Click to collapse
I will talk the way I want. If someone is so stupid to think I'm talking about flashing a full sbf its not my problem
ytwytw said:
and this radio is working perfectly on ATT Atrix and its HSUPA enabled...
Tested by lots ppl on xda, I guess there might be sth wrong with your provider instead of the phone...
Click to expand...
Click to collapse
First, the radio only SBF some posts above doesn't work on an AT&T Atrix. Period.
It uses diferent ram downloaders incompatible with the AT&T one.
If you try to flash it, you'll get an error in both the phone and RSD Lite.
Second, knowing this, I would like to know how these "lots of people" tested the radio not having a working sbf to flash it. I've tested it, making a working SBF myself and all ended with the results I described. I can upload the SBF if anyone is willing to test it.
josuetenista said:
Each System version comes with a specific Radio and instead of writting down the diferent Modem version I wrote the System Version. My BAD!
Tried all diferent radios
N_01.87.00R
N_01.77.15P
N_01.77.07P
also tried Brazilian Claro and Bell radios and doesn't seem to get better. Signal drops sometimes in conclusion SIM card seems to be broken
Click to expand...
Click to collapse
You said that you have tried all those radios?
Do you know where I can download N_01.77.15P?
I "upgraded" to N_01.87.00R thinking that it would be better, but no. I think N_01.77.15P offers better performance.
Thanks!
Rayan

[UNLOCKED BOOTLOADER ONLY] Upgrade ics RazrHD to JB via RSD-Lite

UNLOCKED BOOTLOADER ONLY!!!
Well i wrote this post because many users are having problem upgrading the HD to Jelly Bean, there are simple steps to having a 100% working JB Phone!!!
1. download the JB firmware from Telstra Full from here http://sbf.droid-developers.org/van...A028.0R_LSAVNQJBTELSTRA_P010_A010_CFC.xml.zip or from Firmware thread!
THANKS TO FIRMWARE TEAM!
I like the Telstra one because Orange and SFR have many battery issues.
2. download the modem_signed file of your operator, U can find it on your Firmware file ICS, In this case were gonna use the Telcel Mexico one (is very important to use the correct one, because in each region LTE works in different freq.
Also u have to extract the fsg_signed file too.
Telcel Modem_Signed https://www.box.com/s/dp2aj3v8odeu65yqkr2x
Rogers Modem_Signed https://www.box.com/s/i2qnaauvc0pd3xmn23mg
AGAIN THANKS TO FIRMWARE TEAM!
3. download the .xml edited: https://www.box.com/s/ylydzzjs79ynmj1vbdm3 This file works for everyone, its just an edited file to run the rsd lite without GETVAR error.
4. with the Telstra firm downloaded double click on it and open with WinRar and Replace the .xml, the fsg_signed and modem_signed files.
5. and thats it! u have a fully functional SBF file to start flashing with RSD Lite.
Btw here u can find the latest drivers.... https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
any issue im here to support u!!!
Thanks for this! I really needed a tut, can't believe telcel hasn't released jb for our devices u.u
Sent from my XT925
Royalfox said:
Thanks for this! I really needed a tut, can't believe telcel hasn't released jb for our devices u.u
Sent from my XT925
Click to expand...
Click to collapse
The official JB release comes to telcel in lately January or February.
dashiell.cano said:
The official JB release comes to telcel in lately January or February.
Click to expand...
Click to collapse
Can't wait lol.
How do I flash with RSD Lite? And how can I keep root?
Sent from my XT925
dashiell.cano said:
UNLOCKED BOOTLOADER ONLY!!!
Well i wrote this post because many users are having problem upgrading the HD to Jelly Bean, there are simple steps to having a 100% working JB Phone!!!
1. download the JB firmware from Telstra Full from here http://sbf.droid-developers.org/van...A028.0R_LSAVNQJBTELSTRA_P010_A010_CFC.xml.zip or from Firmware thread!
I like the Telstra one cause Orange and SFR have many battery issues.
2. download the modem_signed file of your operator, U can find it on your Firmware file ICS, In this case were gonna use the Telcel Mexico one (is very important to use the correct one, because in each region LTE works in different freq.
Telcel Modem_Signed https://www.box.com/s/dp2aj3v8odeu65yqkr2x
3. download the .xml edited: https://www.box.com/s/ylydzzjs79ynmj1vbdm3 This file works for everyone, its just an edited file to run the rsd lite without GETVAR error.
4. with the Telstra firm downloaded double click on it and open with WinRar and Replace the .xml and modem_signed files.
5. and thats it! u have a fully functional SBF file to start flashing with RSD Lite.
any issue im here to support u!!!
Click to expand...
Click to collapse
Little question ... Telstra don't support LTE ?
I have installed the full Telstra without Rogers modem ... because i am not in lte zone for the moment ... i really prefer the telstra modem version ! More stable in HSPA and better signal/speed for me on The canadian Telus Carrier Than the Original Rogers modem on ics ! just no test in lte ...
Royalfox said:
Can't wait lol.
How do I flash with RSD Lite? And how can I keep root?
Sent from my XT925
Click to expand...
Click to collapse
download and install rsd lite Version 6.1.4 and the drivers from Motorola support website, conect ur phone, select the sbf file that u create in Filename and click on start! easy!!!
if u have problems add me in whatsapp +524423599702
cedqc418 said:
Little question ... Telstra don't support LTE ?
I have installed the full Telstra without Rogers modem ... because i am not in lte zone for the moment ... i really prefer the telstra modem version ! More stable in HSPA and better signal/speed for me on The canadian Telus Carrier Than the Original Rogers modem on ics ! just no test in lte ...
Click to expand...
Click to collapse
YES, Telstra support LTE but LTE have different freqs and sometimes one doesnt work in another country, ex. In Mexico And Canada we have the same freq, but in Brazil and US we cant have LTE working! the modem_signed from Telstra could work in ur country but maybe not, better u replace the file and u gonna have a fully working Firm!
Please Credits Firmware Team, thanks
Enviado desde mi XT925 usando Tapatalk 2
Pzyduck said:
Please Credits Firmware Team, thanks
Enviado desde mi XT925 usando Tapatalk 2
Click to expand...
Click to collapse
Yeah youre right! .... post edited!
*Sent from my Razr G*
on rogers tried with rogers modem. everything works except lte.
Sent from my XT925 using Tapatalk 2
Did u check the network config?
*Sent from my Razr G*
Just test on telus ( with the rogers phone full flashed to telstra firmware... no need to flash rogers radio ) LTE work great without any problem... in QC City area...
i will try in the next hours with a rogers lte micro sim card
dashiell.cano said:
Did u check the network config?
*Sent from my Razr G*
Click to expand...
Click to collapse
Sorry i meant i'm on Fido but with Rogers Modem, I checked network config. everything was correct but no LTE. was getting 3G speeds.
I also tried the Telstra Modem, no LTE but 3g works. Maybe others will have better luck then me.
Rogers LTE
Krizid said:
Sorry i meant i'm on Fido but with Rogers Modem, I checked network config. everything was correct but no LTE. was getting 3G speeds.
I also tried the Telstra Modem, no LTE but 3g works. Maybe others will have better luck then me.
Click to expand...
Click to collapse
Im having the same problems. Im using The Telstra Full with the rogerss modem and I cant get LTE, only HPDSA. Its quite fast, about 8mbps down but no LTE
I double checked all my APN settings from the Rogers website.
My Rogers XT925 phone work great in lte with telstra full flash with rogers and telus !
But a friend have a problem like you ...
Download http://forum.xda-developers.com/showthread.php?t=1943879
Telcel Mexico... get the radio files ... flash it ...
Now my friend have LTE
This is really werd
cedqc418 said:
My Rogers XT925 phone work great in lte with telstra full flash with rogers and telus !
But a friend have a problem like you ...
Download http://forum.xda-developers.com/showthread.php?t=1943879
Telcel Mexico... get the radio files ... flash it ...
Now my friend have LTE
This is really werd
Click to expand...
Click to collapse
So weird! Some friends are having the LTE issue and when they replace the modem signed with one totally different the LTE back to work! Dont know why!
*Sent from my Razr G*
Telstra with Mexico Modem..still no LTE
dashiell.cano said:
So weird! Some friends are having the LTE issue and when they replace the modem signed with one totally different the LTE back to work! Dont know why!
*Sent from my Razr G*
Click to expand...
Click to collapse
I tried using the Telstra full with the mexico modem. still no LTE on Rogers (BC) in the mobile settings, only 2g/3g/4g is offered, no LTE
ill try to put links to each modem from each region, and a easy way to flash it without lose anything, just waaaaait!
AdamMarkTodd said:
I tried using the Telstra full with the mexico modem. still no LTE on Rogers (BC) in the mobile settings, only 2g/3g/4g is offered, no LTE
Click to expand...
Click to collapse
Lol i have found you problem ... i thing ... 4G icon is LTE ... on telstra firwmware !!! there are no LTE icon !!!! 4G is LTE !
---------- Post added at 03:27 PM ---------- Previous post was at 03:22 PM ----------
http://techau.tv/blog/images/Motorola-and-Telstra-Announce_D5F4/IMG_0997.jpg
Check the phone at the left ... is connected to LTE ;p
dashiell.cano : Add this détails on the first post ;p !
Fixed it
cedqc418 said:
Lol i have found you problem ... i thing ... 4G icon is LTE ... on telstra firwmware !!! there are no LTE icon !!!! 4G is LTE !
---------- Post added at 03:27 PM ---------- Previous post was at 03:22 PM ----------
Check the phone at the left ... is connected to LTE ;p
dashiell.cano : Add this détails on the first post ;p !
Click to expand...
Click to collapse
Your half right! before I was getting only HSDPA+. I flashed the Rogers Modem signed AND fsg_signed. Then It all of a sudden started working on 4G (which I now know is actually LTE)
I had to enter MCC and the MNC to have 4G work. I found then on wiki

firmware from america movil mx to update?

well my firmware is different from the most part of here i think, exactly the version 139.7.26.ghost.row.AmericaMovil.en.MX, and the update of the camera still not coming to Mexico, so I wanna know if I can flash the update for t mobile or different carrier from US and have no problem or should I flash all stock firmware of US who has the update and wait to receive the OTA? If anybody can take a screenshot of the baseband to compare with mine to see if a have a trouble with my signal I would appreciate:good:
PD: I hope this text can be understand
America Movil Update
hermeshhn said:
well my firmware is different from the most part of here i think, exactly the version 139.7.26.ghost.row.AmericaMovil.en.MX, and the update of the camera still not coming to Mexico, so I wanna know if I can flash the update for t mobile or different carrier from US and have no problem or should I flash all stock firmware of US who has the update and wait to receive the OTA? If anybody can take a screenshot of the baseband to compare with mine to see if a have a trouble with my signal I would appreciate:good:
PD: I hope this text can be understand
Click to expand...
Click to collapse
+1 waiting too.
kkhadr said:
+1 waiting too.
Click to expand...
Click to collapse
i think we are the only 2 guys with this firmware I want the update because in the calls sometimes the other person dont understand me some parts of conversation:crying:
America Movil Update
hermeshhn said:
i think we are the only 2 guys with this firmware I want the update because in the calls sometimes the other person dont understand me some parts of conversation:crying:
Click to expand...
Click to collapse
I'm thinking of flashing TMobile or Sprint systems to solve it, but I'm just confirming that data connectivity will be ok on my Vodafone GSM N/W here in Egypt.
ive got the america movil PR one and no camera update yet either.
I know with the XT925 which was the GSM razr HD you could flash other territory RSDlite images as long as the phone was the same model, so probably you could flash the AT&T image if you really wanted . havent tried it, but people did it with the razr HD so i'm thinking it would work
i read you might have to flash the at&t recovery over first, but you should be able to do that if you unlock. not entirely sure though, someone will have to try i guess.
I have the 139.7.26.ghost.row.AmericaMovil.en.CL (Chile) and I was wondering if i can flash t-mobile firmware, but I'm concerned about the LTE freq band. Here in Chile the LTE runs on the 2600hz band.
Anyone know something about that? if I flash the TMO firmware, can I use the recovery to restore an image with the stock en.CL firmware?
waiflih said:
I have the 139.7.26.ghost.row.AmericaMovil.en.CL (Chile) and I was wondering if i can flash t-mobile firmware, but I'm concerned about the LTE freq band. Here in Chile the LTE runs on the 2600hz band.
Anyone know something about that? if I flash the TMO firmware, can I use the recovery to restore an image with the stock en.CL firmware?
Click to expand...
Click to collapse
I have the same question but for firmware of Mexico
Enviado desde mi XT1058 usando Tapatalk now Free
hermeshhn said:
i think we are the only 2 guys with this firmware I want the update because in the calls sometimes the other person dont understand me some parts of conversation:crying:
Click to expand...
Click to collapse
I'm waiting for it too
filonov said:
I'm waiting for it too
Click to expand...
Click to collapse
nobody send a message to the chat of motocare? I asked for the update but they have no idea of when will be released here on Mexico, what about Chile? and Brazil?
hermeshhn said:
nobody send a message to the chat of motocare? I asked for the update but they have no idea of when will be released here on Mexico, what about Chile? and Brazil?
Click to expand...
Click to collapse
They said "the phone is ready to work perfectly, no updates needed" or something like that.So, they have no idea.
waiflih said:
They said "the phone is ready to work perfectly, no updates needed" or something like that.So, they have no idea.
Click to expand...
Click to collapse
That it's sad, I hope we get our respective update soon
Enviado desde mi XT1058 usando Tapatalk now Free
hermeshhn said:
That it's sad, I hope we get our respective update soon
Enviado desde mi XT1058 usando Tapatalk now Free
Click to expand...
Click to collapse
Just wondering if you guys have gotten the update yet? I have a Nextel phone from Mexico and I don't know if I have the update or not, since I bought it used! Mine is:
139.7.30.ghost_row.NII.en.MX
Would love to see the camera update. I'm contemplating flashing the T-Mobile firmware as well, since mine is XT1053. Anyway, just looking to see if you guys had received the update or not. I think our phones are very similar, just different carriers.
-Collin-
Updated on 30 october to 139.12.35.ghost_row.AmericaMovil.en.PR yes . . .
kalimerobleu said:
Updated on 30 october to 139.12.35.ghost_row.AmericaMovil.en.PR yes . . .
Click to expand...
Click to collapse
Does anyone know the changelog of this update?? I have 139.12.35 Movistar Chile, thanks.
mmm
Someone has an idea when KitKat will roll out to our firmwares?
I have 139.12.35.ghost_row.AmericaMovil.en.PR and based in Ireland..
I can't wait!
tihtow said:
Someone has an idea when KitKat will roll out to our firmwares?
I have 139.12.35.ghost_row.AmericaMovil.en.PR and based in Ireland..
I can't wait!
Click to expand...
Click to collapse
Just install the T-Mobile retail ROM and you would get the OTA. That's what I did...
For all of you that have a Mexican MotoX (1058) from Telcel. I just flashed the kitkat firmware for AT&T (ATT_XT1058_4.4-13.11.1Q2.X-69-3_CFC_1FF.xml.zip), via RDLite (Bootloader has to be unlocked) ....works like a charm. Everything runs VERY smooth and buttery. The only thing that needs confirguring is the APN for Telcel (Which I will provide). So I you're not willing to wait until after X-mas for the 4.4 update...just flash AT&T (Just follow the guide: http://forum.xda-developers.com/show....php?t=2446515)
APN (Telcel):
Nombre: Mexico: Telcel: Internet
APN: internet.itelcel.com
Proxy: <Dejar vacio>
Puerto: <Dejar vacio>
Nombre de usuario: webgprs
Contraseña: webgprs2003
Servidor: <Dejar vacio>
MMSC: <Dejar vacio>
Proxy de MMS: <Dejar vacio>
Puerto MMS: <Dejar vacio>
MCC: 334
MNC: 020
Protocolo de autenticación: PAP
Tipo de APN: <Dejar vacio>
delf0s said:
For all of you that have a Mexican MotoX (1058) from Telcel. I just flashed the kitkat firmware for AT&T (ATT_XT1058_4.4-13.11.1Q2.X-69-3_CFC_1FF.xml.zip), via RDLite (Bootloader has to be unlocked) ....works like a charm. Everything runs VERY smooth and buttery. The only thing that needs confirguring is the APN for Telcel (Which I will provide). So I you're not willing to wait until after X-mas for the 4.4 update...just flash AT&T (Just follow the guide: http://forum.xda-developers.com/show....php?t=2446515)
Click to expand...
Click to collapse
The AT&T ROM is full of AT&T bloatware. The T-Mobile ROM is retail and bloatware free, it is much better...
mschumacher69 said:
The AT&T ROM is full of AT&T bloatware. The T-Mobile ROM is retail and bloatware free, it is much better...
Click to expand...
Click to collapse
The question is....are the radios the same?? AT&T bloatware,...it's only like 3 apps
delf0s said:
The question is....are the radios the same?? AT&T bloatware,...it's only like 3 apps
Click to expand...
Click to collapse
No, they are not! They do work though but you may lose access to some bands. You could always flash the tmobile 4.4 and then flash just the modem from the att 4.4.

No lte please help!

Hi, Im from Mexico and my note 3 uses a 4glte sim card for Telcel company with my plan, its suposed to work the att version here (1700MHz and 2100MHz) but my smartphone only shows "4g" (+HSPA) even in the areas with lte's support. I even tried many things on the hidden menu *#*#4636#*#* but nothing works even if I choose the lte option.
My note 3 info:
SM-N900A
Android 4.4.2
N900AUCUCN2
Custom rom dynamic kat 6.1
Please help me! Greetings from Mexico!
Don't gona appears "LTE" if your custom ROM use "4G". But no worries 4G/LTE are same thing. You can install this MOD for Xposed anyway and try. Good luck :highfive:
Thanks my friend but I´ve made many tests and I only get +hspa speed, never LTE, I dont what to do
alugah said:
Thanks my friend but I´ve made many tests and I only get +hspa speed, never LTE, I dont what to do
Click to expand...
Click to collapse
Flash Stock Rom :highfive:
Joku1981 said:
Flash Stock Rom :highfive:
Click to expand...
Click to collapse
Thanks, Can I flash telcel México kk stock rom in my att note 3? Cause in the original att stock rom I didnt get lte too
alugah said:
Thanks, Can I flash telcel México kk stock rom in my att note 3? Cause in the original att stock rom I didnt get lte too
Click to expand...
Click to collapse
I think you just need to add telcel APN in Settings/Connections/More Networks/Mobile Networks/Access Point Names
Nombre: telcel
APN: internet.itelcel.com
Found here https://www.youtube.com/watch?v=I-N-atXwP_w hopefully that works for you and you won't have to reflash!
brisinger08 said:
I think you just need to add telcel APN in Settings/Connections/More Networks/Mobile Networks/Access Point Names
Nombre: telcel
APN: internet.itelcel.com
Found here https://www.youtube.com/watch?v=I-N-atXwP_w hopefully that works for you and you won't have to reflash!
Click to expand...
Click to collapse
Thanks for everything, I ve already did that
alugah said:
Thanks for everything, I ve already did that
Click to expand...
Click to collapse
How about these http://celularesdepanama.com/apn/mexico/apn-telcel-mexico/
If that still doesn't work or if you've tried those already sorry that's all i've got
brisinger08 said:
How about these http://celularesdepanama.com/apn/mexico/apn-telcel-mexico/
If that still doesn't work or if you've tried those already sorry that's all i've got
Click to expand...
Click to collapse
Thanks my friend, and everybody, I configure the lte APN Settings and the hidden test menú, I think its problem of the company cause sometimes for 10-15 seconds I get lte but thats all.

Android 6.0 Galaxy S6 SM-G920T

hey!
I bought a Samsung Galaxy S6 SM.G920T on Best Buy a couple of months ago and i have it with an argentinian SIM.
i want to update the Software to 6.0 and i saw in Sammobile a 6.0 version. Here comes the problem, my firmare (G920TUEU3COK1) is from "cellular south" carrier and this version ( G920TUVU3EPD1) is from "USA/T-Mobile". I want to know if i install that firmware i can still use my argentinian sim? or i only can use the "cellular south" version?
My english is not perfect sorry
Thank you
Yes. Mine is from cellular south as well. You can flash it with t-mobile mm. and then flash this modem dropbox.com/s/fpkeyps54bzy2l6/modem.bin?dl=0 you should be able to use any carrier
here is the guide reddit.com/r/GalaxyS6/comments/4eazdg/nont_mobile_smg920t_need_some_insight/ follow this and you should be fine. good luck
whagalimashda said:
Yes. Mine is from cellular south as well. You can flash it with t-mobile mm. and then flash this modem dropbox.com/s/fpkeyps54bzy2l6/modem.bin?dl=0 you should be able to use any carrier
here is the guide reddit.com/r/GalaxyS6/comments/4eazdg/nont_mobile_smg920t_need_some_insight/ follow this and you should be fine. good luck
Click to expand...
Click to collapse
Ok i will try. Thank you!
whagalimashda said:
Yes. Mine is from cellular south as well. You can flash it with t-mobile mm. and then flash this modem dropbox.com/s/fpkeyps54bzy2l6/modem.bin?dl=0 you should be able to use any carrier
here is the guide reddit.com/r/GalaxyS6/comments/4eazdg/nont_mobile_smg920t_need_some_insight/ follow this and you should be fine. good luck
Click to expand...
Click to collapse
Quick update! it worked fine. I have signal and everithing Thanks!!!!
whagalimashda said:
Yes. Mine is from cellular south as well. You can flash it with t-mobile mm. and then flash this modem dropbox.com/s/fpkeyps54bzy2l6/modem.bin?dl=0 you should be able to use any carrier
here is the guide reddit.com/r/GalaxyS6/comments/4eazdg/nont_mobile_smg920t_need_some_insight/ follow this and you should be fine. good luck
Click to expand...
Click to collapse
does that modem work if I'm using this same phone on att network?
ejbmvp said:
does that modem work if I'm using this same phone on att network?
Click to expand...
Click to collapse
Idk you can try, if the modem fail you can flash again the old firm without problem
ejbmvp said:
does that modem work if I'm using this same phone on att network?
Click to expand...
Click to collapse
Yes :good:
thanks it works. it took me 2 reboots to get LTE to kick in. also it comes with some T-Mobile bloat but from what I see at a glance only about 6 things.

Categories

Resources