Database Develop

Weird problem when flashing new rom

Hi guys. I got a real weird problem or so.
I was on a kingdroid rom based on 4.0.4.
Everything ok, no problems, until I turn off the cellphone to take the SD card. From that moment my note just dont turn On.
The thing is I was able to go in to recovery (nice), so I flash a safe kernel. All ok.
And then after a full wipe I tried to flash a rom, and here is the weird stuff: After flash any rom, the cellphone go into restart, everything is new but surprise, am still in Kingdroid v7, even when I flash a 4.1.2 based rom.
I tried many many times, and always the same. I can´t flash a new rom.
My kernel is the Philz one.
Hope someone knows what is happening.

Did you wipe data dalvik cache? If you still have issues you can wipe /system before flashing new ROM (recommended)
Sent from my GT-N7000 using Tapatalk 2

asf58967 said:
Did you wipe data dalvik cache? If you still have issues you can wipe /system before flashing new ROM (recommended)
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
I can full wipe, and format/data, but when I try Fromat/system, recovery get freeze. :/
You mean Format/system, right?
So weird. Every time, the same, am stuck in Kingdroid. :S

It concerns me that you can't wipe /system
Hopefully someone can chime in here

you can try flashing from diffrent CMW recovery version.. try flashing speedmod 3-15 and reboot recovery and try to fullwipe and install..
i had weird problem when using diffrent CMW like abyss. i had quite similar problem..
try Speedmod 3-15. it is safe and flash speed is faster

asf58967 said:
It concerns me that you can't wipe /system
Hopefully someone can chime in here
Click to expand...
Click to collapse
mmm.
When I try format/system, recovery freeze and the phone restarts. And the Rom is formatted, so I have to put all my info again (select lenguaje, config wifi, config google account, etc). And still in kingdroid.

mistajoe83 said:
you can try flashing from diffrent CMW recovery version.. try flashing speedmod 3-15 and reboot recovery and try to fullwipe and install..
i had weird problem when using diffrent CMW like abyss. i had quite similar problem..
try Speedmod 3-15. it is safe and flash speed is faster
Click to expand...
Click to collapse
Never think on that. Will try. Thanks

That is a great idea try speed mod
Sent from my GT-N7000 using Tapatalk 2

I tried Speedmod kernel, full wipe, flash alliance rom and after restarts, Kingdroid again.
The only thing that change was the kernel. So i have Philz again.
I will try with another kernel.
Is like to have a briked note

You may want to try flashing stock gingerbread (pre rooted from dr.ketan) from PC Odin...
I had some weird issues once and it reset me..
Sent from my GT-N7000 using Tapatalk 2

asf58967 said:
You may want to try flashing stock gingerbread (pre rooted from dr.ketan) from PC Odin...
I had some weird issues once and it reset me..
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Yep. I will do that.
now I lost recovery.
The phone just get to "samsung galaxy note gt-n7000" and stay there.
I can go on donwload mode, so I will try to flash a stock rom.
Thanks guys. I will report tomorrow with news. Hope works.

Do that stock GB (pre rooted) though not ICS...in PC Odin... that way when you wipe you can do it safely in stock setup without having a custom kernel...
Then just flash whatever with Mobile Odin
Sent from my GT-N7000 using Tapatalk 2

asf58967 said:
You may want to try flashing stock gingerbread (pre rooted from dr.ketan) from PC Odin...
I had some weird issues once and it reset me..
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
try this method.. it might worked.

May be your downloaded new rom corrupt
Sent from my GT-N7000 using xda premium

dsmas said:
May be your downloaded new rom corrupt
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I tried with four different roms.
So I tried with Odin, with no problems in the process, but when the phone restarts just get to "samsung galaxy note gt-n7000" and stay there.
Now even the batterie freeze

are you sure that the Odin flash was successful?
if yes, the now try to boot into recovery and do a factory reset, reboot again

Ok. good news. I tried a few times with the GB pree rooted of dr.ketan, with no positive results. So I tried with a diferent one, from sammobile. Is a stock from my country. This one works.(a little hope). Well, now the phone is crazy. super unstable. But, is something.

nokiamodeln91 said:
are you sure that the Odin flash was successful?
if yes, the now try to boot into recovery and do a factory reset, reboot again
Click to expand...
Click to collapse
Yep. Odin flash was successul. With green colors and all. But at restarts the phone was freeze and no chance to get recovery mode.
As I say in previus post, now the phone turns on,but is unstable. Is a stock GB rom.
I get a lot of error messages like:
Android.proces.acore has stoped.
com.android.phone has stoped.
So the phone is unusable

ok great.. this is the time when you HAVE to somehow get into the recovery mode and do a factory reset.. coming from a ics rom will give these errors.. just needs a wipe

nokiamodeln91 said:
ok great.. this is the time when you HAVE to somehow get into the recovery mode and do a factory reset.. coming from a ics rom will give these errors.. just needs a wipe
Click to expand...
Click to collapse
Ok. I flashed the Pre-rooted again, and now I am in recovery mode. OMG xD
Question. IS safe to do a full wipe in this kernel? or do I flash a safe kernel, like speedmod??
Am gonna search a new religion to believe or something after this.
Edit: Ok, after think about it I did it a full wipe. (I am on gb so no problems)
The phone is OK. fully working!!! omg guys. Thanks so much!
Am gona do a resume of my problem, maybe gonna be of help for someone.

How to clean wipe completely for OS upgrade

I am on Stock ICS and Jelly bean update will be rolled out soon by samsung.
Now i want to completely wipe out everything on my phone and do a company like fresh update to jellybean OS.
So what is the correct procedure for this ? And, i assume i have to compulsorily use Kies.

Yes because JB might only come on kies and not as OTA.
Flash a safe kernel (Philz) and go to mounts and storage > format /data, cache, preload, emmc ( internal storage) reboot.

So would still be possible to update even though you are not on a stock kernel

yes kies upgrade even on custom kernel

nokiamodeln91 said:
Flash a safe kernel (Philz) and go to mounts and storage > format /data, cache, preload, emmc ( internal storage) reboot.
Click to expand...
Click to collapse
I dont want to flash any kernal... i just want to know correct procedure to clear everything on phone, reset it like in factory state and update jelly bean when available via kies...

olivespin said:
I dont want to flash any kernal... i just want to know correct procedure to clear everything on phone, reset it like in factory state and update jelly bean when available via kies...
Click to expand...
Click to collapse
Wipe/factory reset on stock ICS kernel will brick your phone..
http://forum.xda-developers.com/showthread.php?t=1633938
Sent from my GT-N7000 using Tapatalk 2

I am still looking for answer pertaining to my original question

olivespin said:
I am still looking for answer pertaining to my original question
Click to expand...
Click to collapse
You already got the answer..
Sent from my GT-N7000 using Tapatalk 2

Here is your easy answer since you can´t read..
Hold UP VOLUME + HOME BUTTON + POWER BUTTON, do it until phone restarts to recovery..
Wipe Data/factory reset and then Wipe cache partition..
Good Luck!
Thank me after you´ve done it!

Rivan_92 said:
Here is your easy answer since you can´t read..
Hold UP VOLUME + HOME BUTTON + POWER BUTTON, do it until phone restarts to recovery..
Wipe Data/factory reset and then Wipe cache partition..
Good Luck!
Thank me after you´ve done it!
Click to expand...
Click to collapse
Please don't, he/she is on stock ics kernel, flash philz kernel 1st..
Sent from my GT-N7000 using Tapatalk 2

Rivan_92 said:
Here is your easy answer since you can´t read..
Hold UP VOLUME + HOME BUTTON + POWER BUTTON, do it until phone restarts to recovery..
Wipe Data/factory reset and then Wipe cache partition..
Good Luck!
Thank me after you´ve done it!
Click to expand...
Click to collapse
If you've done this then you'll get your phone dead in an instant...
The answer:
Install a safe kernel to wipe on then your ok..
Recognized Distributor™

C'mon guys you are not being very helpful. All OP wants to do is do a SAFE factory reset WITHOUT flashing a custom kernel.
2 options - Flash Philz Temp recovery and wipe on that, or flash Philz wipe data/factory reset zip file. Both are SAFE and will not alter stock status of phone. I can provide links if needed...
Sent from my GT-N7000 using xda app-developers app

Error.

shoey63 said:
C'mon guys you are not being very helpful. All OP wants to do is do a SAFE factory reset WITHOUT flashing a custom kernel.
2 options - Flash Philz Temp recovery and wipe on that, or flash Philz wipe data/factory reset zip file. Both are SAFE and will not alter stock status of phone. I can provide links if needed...
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
To reset the phone why i have to flash a kernal ??? Am sure it can be done normally via phone and safely...
Its such a simple question and here all are dragging me here and there

Its a bug bro.if you are on ics stock rom dont wipe in recovery or you will 99% end up with a hard bricked phone
Try flashing philz or abyss kernel or dont wipe from recovery
We are warning you
Plz understand!
Sent from my GT-N7000 using xda premium

sepehrthegreat-iran said:
Its a bug bro.if you are on ics stock rom dont wipe in recovery or you will 99% end up with a hard bricked phone
Try flashing philz or abyss kernel or dont wipe from recovery
We are warning you
Plz understand!
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Ok, forget about wiping then..... i wont do it.
But i can safely upgrade to Jelly bean via Kies right - Without any fear of bricking.... ? (BTW, i believe kies wipe the phone clean before installing new OS, but i can B wrong)

Yes you can upgrade via kies safely. It may most probably wipe your phone as this may need a repartitioning.

don't listen this freaking punk !
if you want to factory restore your phone safely,
then
if you on "ass screw sandbitch" or "sweet gingerbread"
really simple,go on your dialler/phone and type this code:
*#7780# Factory Reset
*2767*3855# Full Factory Reset
(some differ from ics or GB,try to add *# before,ex:*#*#7780#)
and your phone is like a virgin ***** !
(this wipe everything on your phone !)
and for sure no psycholo fake brick on iCs (hahaha!!! i see an UFO over my house at 6hours!!,then 10 000 toxical ships says:hè a guys see an ufo!! it's real !!.
if you want a full list of code that do some magical things,search on this section,you will find it !
^_¢

kaosdroid said:
don't listen this freaking punk !
if you want to factory restore your phone safely,
then
if you on "ass screw sandbitch" or "sweet gingerbread"
really simple,go on your dialler/phone and type this code:
*#7780# Factory Reset
*2767*3855# Full Factory Reset
(some differ from ics or GB,try to add *# before,ex:*#*#7780#)
and your phone is like a virgin ***** !
(this wipe everything on your phone !)
and for sure no psycholo fake brick on iCs (hahaha!!! i see an UFO over my house at 6hours!!,then 10 000 toxical ships says:hè a guys see an ufo!! it's real !!.
if you want a full list of code that do some magical things,search on this section,you will find
^_¢
Click to expand...
Click to collapse
One question, do you have N7000??.. If yes you should flash stock ICS and make factory reset on stock kernel...
Sent from my GT-N7000 using Tapatalk 2

zai89 said:
One question, do you have N7000??.. If yes you should flash stock ICS and make factory reset on stock kernel...
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
+1:good:
And then people won't listen to this freaking punk !

N7000 Boot Splash Soff Bricked?

Quote:
Originally Posted by mrjapan21 View Post
Hy guys,
I have an N7000 for some time, on stock rom. I had some custom rom 8 months ago but i returned o official and worked great. 2 days ago it started to shut down for no reason 5-6 times in 24 hours. Yesterday morning it didnt wanted to start at all. It shuts down some seconds after SIM verification PIN. I am on 4.0.4. I installed Philz cwm 6 safe kernel and tried to install again the XXLRI official rom. The same thing. So I am stuck.
There is anything I can do with it? I hope so... If not, i still got warrranty for it but i have to reset te counter.
Hope to hear from you soon
1.Did you do a factory reset or wipe on an unsafe kernel?
2.What error do you get in PC odin and at whst point?
3. Can you get into recovery?
4. If so can you flash Cm10.1? (Do wipes first from safe kernel)
5. If so, can you flash lr1 tar file successfully using mobile Odin pro?
Sent from my Samsung Galaxy SV using Tapatalk 3
Devices:
Samsung Galaxy Note (GT-N7000): Stock Rooted 4.1.2 with C.o.H. Hello World Kernel
Asus MeMO Pad Smart 10 (ME301T): Stock Rooted 4.2.1
Amazon Kindle Fire (1st Gen): Dualboot - CM10.1/SGT7 (4.2.2) / "Stockish" CM7 (2.3.7)
A22 Android Mini PC (MK802): Stock Rooted 4.0.4
Sony SmartWatch (MN2): Stock w/ WatchIt!
Sony Ericsson LiveView (MN800): Defunct!

For any people chiming in here - he pasted his original post on a different thread (http://forum.xda-developers.com/showthread.php?t=1857556&page=27) and my follow up post here...
@mrjapan21 --> please slowly and carefully read below (i copied and pasted from other thread my most recent post) and post back...
1. yes philz doesn't let you do a factory reset from settings to stop you from bricking your phone. I mean did you do a factory reset from STOCK ICS before this problem happened on the stock kernel...
2. IT IS IMPORTANT that you tell us WHAT THE ERROR in Odin 3 is...
3. You can get CM10.1 from dev section of xda. you need gapps too. This will all be linked in the original post of that thread. download it and put it on your phone's SD card - you can hook up the phone to computer and boot into philz and then use your phone as a storage device to copy it over. To install it, in philz, first wipe /data /system /cache /preload and dalvik-cache from mounts and storage. Then, flash CM10.1 zip. After that finishes, flash GAPPS.
3a. You can THEN use Mobile Odin to flash the .tar file from CM10.1 of LRI
3b. ALTERNATIVELY you can, AFTER ALL WIPES, try PC Odin 3 again to try to flash LRI
3c. ANOTHER ALTERNATIVE is that instead of flashing CM10.1 as i suggested above, you can try a modified samsung touchwizz rom from the development section of xda.
---------- Post added at 09:14 AM ---------- Previous post was at 09:07 AM ----------
I FORGOT - If you choose you JUST want to do warranty, and we can't get it working, you SHOULD be able to flash CM10.1 even if you damaged your phone, since you can get in recovery and its a light rom... then get far enough through the boot to run Triangle Away (search XDA) so that yellow triangle is gone... We can discuss this when the time comes if you want.

asf58967 said:
1. yes philz doesn't let you do a factory reset from settings to stop you from bricking your phone. I mean did you do a factory reset from STOCK ICS before this problem happened on the stock kernel...
2. IT IS IMPORTANT that you tell us WHAT THE ERROR in Odin 3 is...
3. You can get CM10.1 from dev section of xda. you need gapps too. This will all be linked in the original post of that thread. download it and put it on your phone's SD card - you can hook up the phone to computer and boot into philz and then use your phone as a storage device to copy it over. To install it, in philz, first wipe /data /system /cache /preload and dalvik-cache from mounts and storage. Then, flash CM10.1 zip. After that finishes, flash GAPPS.
3a. You can THEN use Mobile Odin to flash the .tar file from CM10.1 of LRI
3b. ALTERNATIVELY you can, AFTER ALL WIPES, try PC Odin 3 again to try to flash LRI
3c. ANOTHER ALTERNATIVE is that instead of flashing CM10.1 as i suggested above, you can try a modified samsung touchwizz rom from the development section of xda.
1. No, I didnt do it.
2. As a matter of that theres no error on ODIN. It says PASS!
3.ok to much info here tell me one to try it: cm10.1 of LRI or Samsung Touchwizz Rom.
Thank you
Click to expand...
Click to collapse

my n7000 got a problem. it keeps shutting down.
So:
1. i installed from sdcard via philz cwm6 CM9.0 (as i read on xda)
2. after that installed from sdcard CM10.1 via philz
3. flashed gapps
4. reboot
5. nothing. it keeps shutting down
what should i do next?

OK since your under warranty your best bet is to run triangle away from xda to remove your yellow triangle if you have it...
The use Mobile Odin and flash a stock image... DO NOT ROOT....and then send it in for warranty repair
Things are bad if if it is auto shutdown
Sent from my ME301T using Tapatalk 2

nsemem physical
How to reset counter?

mrjapan21 said:
How to reset counter?
Click to expand...
Click to collapse
I dont understand. The Mobile Odin is apk right? How can i open it in philz cwm?

Search for triangle away on xda and if you consider to donate please buy it from play store and install it you will find the option to reset counter.. Your phone will reboot in kind of download mode.. Press upkey to continue resetting would be the option.. Just follow the prompts
Sent from my GT-N7000 using xda app-developers app

Are ALL stock JB kernels safe? Also, should the phone get stuck in a boot loop while updating from OTA or flashing with Odin (coming from ICS) would it be safe to factory reset? Thanks

There is no use trying to risk formatting in stock recovery.. If you have issues with bootloops upgrading from OTA or odin.. Install philz kernel.. It is safe from brickbug.. Do the wipes that is format /system /data/preload /cache /dalvik cache and use odin to flash stock rom again.. Do remember to flash philz kernel after that..
Sent from my GT-N7000 using xda app-developers app

treacherous_hawk said:
There is no use trying to risk formatting in stock recovery.. If you have issues with bootloops upgrading from OTA or odin.. Install philz kernel.. It is safe from brickbug.. Do the wipes that is format /system /data/preload /cache /dalvik cache and use odin to flash stock rom again.. Do remember to flash philz kernel after that..
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
I need to keep stock, no CWM or non-stock kernels, which is why I'm asking if JB kernels are safe.

You can but in that case dont wipe on stock recovery..
Sent from my GT-N7000 using xda app-developers app

Misread

my phone rebooting Constantly

Hi:
I just flashed stock jb rom yesterday, but today when phone just booting it reboot again and again.
what i can do? pls help...

bidopasha said:
Hi:
I just flashed stock jb rom yesterday, but today when phone just booting it reboot again and again.
what i can do? pls help...
Click to expand...
Click to collapse
do a clean install after wiping /system /preload /data /cache /dalvik cache. make sure to do these wipes on safe kernel like Philz.

treacherous_hawk said:
do a clean install after wiping /system /preload /data /cache /dalvik cache. make sure to do these wipes on safe kernel like Philz.
Click to expand...
Click to collapse
That may be overkill, I'd try just installing Philz kernel then wipe cache and dalvik, see of that clears it first, no need to reflash rom.
Sent from my GT-N7000 using xda premium

same here i cant use anything in jb stock rom it freezes and reboots itself and overheating with no sound

factory reset 1 round can help you.

phakkhom999 said:
factory reset 1 round can help you.
Click to expand...
Click to collapse
Don't factory reset under stock kernel, flash Philz or other safe first.
Sent from my GT-N7000 using xda premium

Note N7000 stuck on Samsung logo after AlBorak Custom Rom

i just flashed Custom Rom of Alborak
( Link here -> http://forum.xda-developers.com/showthread.php?t=2274152 )
I Flashed it by wiping data / cache partition / dalvik cache
i used 3 kernels one by one but it is stucking on samsung logo.
( 1.franco kernel
2. philz kernel
3. helloworld kernel )
please help me
Sent from my GT-I9500

preetgurm said:
i just flashed Custom Rom of Alborak
( Link here -> http://forum.xda-developers.com/showthread.php?t=2274152 )
I Flashed it by wiping data / cache partition / dalvik cache
i used 3 kernels one by one but it is stucking on samsung logo.
( 1.franco kernel
2. philz kernel
3. helloworld kernel )
please help me
Sent from my GT-I9500
Click to expand...
Click to collapse
Please try Factory Reset in recovery "Wipe data factory reset" first. If still fails,
1. Flash philz, reboot recovery.
2. Do All Wipes and formats.
3. Flash Rom
4. It should boot

sorry jackwu but nothing worked from your methods
Sent from my GT-I9500

preetgurm said:
sorry jackwu but nothing worked from your methods
Sent from my GT-I9500
Click to expand...
Click to collapse
Wow. Okay First thing first
1. Can you boot into recovery? Otherwise can you boot into download mode?
2. If you can go to recovery, try flashing PhilZ-cwm6-XXLTA-ATL-5.15.0-signed safe kernel with recovery, then reboot recovery again.
3. Do factory wipe reset, followed by "Yes, I want to install a new ROM" Super Wiper.
4. Wipe caches, dalvik cache followed by format data, system, cache, preload in "mount and storage".
5. Flash your rom again, read whether it's installed successfully and reboot system. Otherwise try flashing another TW based rom (DO NOT flash AOSP/ KK roms!)
6. If flashing another rom succeed, that means u might have a bad download. Try redownloading your rom again.
7. By still able to go to either recovery or download mode, your device is still rescueable, so do not worry too much and do lots of searching. I was able to rescue mine when I soft bricked it.
8. IF you can't boot to recovery or still fail to flash any rom, I suggest you flash a stock rom using odin n see if it boots.
9. If and IF everything else fails, I hope @AndroidSlave or @nokiamodeln91 will be able to advice you as both of them are few of the good experienced "doctors".
Sent from my GT-N7000 using XDA Free mobile app

Jackwu696 said:
Wow. Okay First thing first
1. Can you boot into recovery? Otherwise can you boot into download mode?
2. If you can go to recovery, try flashing PhilZ-cwm6-XXLTA-ATL-5.15.0-signed safe kernel with recovery, then reboot recovery again.
3. Do factory wipe reset, followed by "Yes, I want to install a new ROM" Super Wiper.
4. Wipe caches, dalvik cache followed by format data, system, cache, preload in "mount and storage".
5. Flash your rom again, read whether it's installed successfully and reboot system. Otherwise try flashing another TW based rom (DO NOT flash AOSP/ KK roms!)
6. If flashing another rom succeed, that means u might have a bad download. Try redownloading your rom again.
7. By still able to go to either recovery or download mode, your device is still rescueable, so do not worry too much and do lots of searching. I was able to rescue mine when I soft bricked it.
8. IF you can't boot to recovery or still fail to flash any rom, I suggest you flash a stock rom using odin n see if it boots.
9. If and IF everything else fails, I hope @AndroidSlave or @nokiamodeln91 will be able to advice you as both of them are few of the good experienced "doctors".
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
thanx for your info
but
can you please give me link for PhilZ-cwm6-XXLTA-ATL-5.15.0-signed
and when im going to do format system cache preload it gives error
Sent from my GT-I9500

this is the error i get while formatting preload
Sent from my GT-I9500

preetgurm said:
this is the error i get while formatting preload
Sent from my GT-I9500
Click to expand...
Click to collapse
Here you are right to download page http://d-h.st/users/philz_touch/?fld_id=25295#files Credits belong to @Phil3759. You are on CWM recovery, I don't know why but that CWM isn't able to format preload. Use phil's and all's good to go

Jackwu696 said:
Here you are right to download page http://d-h.st/users/philz_touch/?fld_id=25295#files Credits belong to @Phil3759. You are on CWM recovery, I don't know why but that CWM isn't able to format preload. Use phil's and all's good to go
Click to expand...
Click to collapse
there are 2 files which to download ?
md5 or zip ?
Sent from my GT-I9500

preetgurm said:
there are 2 files which to download ?
md5 or zip ?
Sent from my GT-I9500
Click to expand...
Click to collapse
the md.5 file is for odin, which you can use if you can't access recovery
the zip is for flashing through CWM
Download both just in case, n always keep zip one in your sd card

Jackwu696 said:
the md.5 file is for odin, which you can use if you can't access recovery
the zip is for flashing through CWM
Download both just in case, n always keep zip one in your sd card
Click to expand...
Click to collapse
i get error only in format preload
dont know why ?
please help
Sent from my GT-I9500

preetgurm said:
i get error only in format preload
dont know why ?
please help
Sent from my GT-I9500
Click to expand...
Click to collapse
Is that on phil's recovery? I don't think it's supposed to look like that. Anyway, just flash philz first, reboot to recovery again then do all the format n wipes I stated above
Sent from my GT-N7000 using XDA Free mobile app

Jackwu696 said:
Is that on phil's recovery? I don't think it's supposed to look like that. Anyway, just flash philz first, reboot to recovery again then do all the format n wipes I stated above
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
after flashing philz
again it is giving error in format preload
other wipes and formats done successfully
Sent from my GT-I9500

preetgurm said:
after flashing philz
again it is giving error in format preload
other wipes and formats done successfully
Sent from my GT-I9500
Click to expand...
Click to collapse
Strange.. I did experience preload wiping error but that was with philz touch recovery but never with the one I suggested..

preetgurm said:
after flashing philz
again it is giving error in format preload
other wipes and formats done successfully
Sent from my GT-I9500
Click to expand...
Click to collapse
The pic you posted doesnot look like Philz recovery... Install the kernel properly then power off the device and boot into recovery again...

Jackwu696 said:
Strange.. I did experience preload wiping error but that was with philz touch recovery but never with the one I suggested..
Click to expand...
Click to collapse
i posted the pic of cwm recovery
but i tried after installing philz
but nothing works
Sent from my GT-I9500

preetgurm said:
i posted the pic of cwm recovery
but i tried after installing philz
but nothing works
Sent from my GT-I9500
Click to expand...
Click to collapse
Boot into download mode and install Philz tar XXLTA kernel.. then power off and boot into recovery.

Jackwu696 said:
Strange.. I did experience preload wiping error but that was with philz touch recovery but never with the one I suggested..
Click to expand...
Click to collapse
Did you reboot recovery again after installing phils? It's so weird.
Sent from my GT-N7000 using XDA Free mobile app