Database Develop

[Newbie needs help 2] I Just installed temasek's KANG build

I'm new here and the first ROM I've tried installing was RC1 91 but after I finished the procedure, my phone doesn´t leave LG home screen and rebooting after 5 sec. What did I do wrong?
Steps:
- Root;
- Download the ROM;
- Copy in external memory;
- Power off the phone;
- Boot in recovery;
- Backup current ROM;
- Wipe cache partition and wipe data/factory reset;
- Wipe dalvik cache
- Finally, flash ROM and reboot.
And the restore isn´t work too.

Do you have p990 or p999?
Sent from my Optimus 2X using XDA

P990 and i was running 2.3.4 V20l Euro Open

What recovery version do you have?, the CWM "touch" version HAS issues with flashing, try an older version , non touch, also its a lot better flashing from the external SD card than the internal memory (a.k.a. internal SD). (I use 5.0.2.7, you can grab it at Temasek thread, second post)
I had flashing issues and here is how they are throubleshoted:
1: Reflash, sometimes CWM (recovery) make bad flashes, reflash, sometimes it work.
2: Format everything, choose factory reset, then flash again, no need to wipe cache or dalvik because everything is wiped except recovery.
3: Use a script to get partition back to ext3, when a rom uses ext4 it automatically changes it BUT when you install a ext3 rom it does NOT reformat back to ext3, it leaves it in ext4 and thus doesnt work.
4: Try another rom, an older or a different rom, I had this issue with topogigi rom once and the modaco rom its 100% incompatible with my phone... dont ask why no one knows.
5: Use a different CMW version, this is no. 5 if you have a non touch version (mine for ej. has modded menus) but if you have the touch version it has issues with flashing, temasek had problems with his own roms...

sales_jao said:
I'm new here and the first ROM I've tried installing was RC1 91 but after I finished the procedure, my phone doesn´t leave LG home screen and rebooting after 5 sec. What did I do wrong?
Steps:
- Root;
- Download the ROM;
- Copy in external memory;
- Power off the phone;
- Boot in recovery;
- Backup current ROM;
- Wipe cache partition and wipe data/factory reset;
- Wipe dalvik cache
- Finally, flash ROM and reboot.
And the restore isn´t work too.
Click to expand...
Click to collapse
you're missing one thing you should format/data factory reset first. of course the restore doesn't work because CM7 converts yours system to ext4. while stock rom the system is ext3.
you should try this script
Code:
http://etana.donka.hu/?dir=scripts
if you like you should full wipe or use nvflash recovery there is a thread there in development thread or from this one
Code:
http://android.modaco.com/topic/335474-25-mar-nvflash-stock-rom-release-v10b-dated-1300166062-15032011/
.
the difference between that script and nvflash is the method. vadonka scripts use CWM. and nvflash use the driver for your computer, if you use method nvflash you have already rom v10b.
after you already use nvflash / full wipe in vadonka script, you can flash cm7 again.
or if you like you can search in development section there is convert to ext3 back of course this method is delete your whole partition
Code:
http://forum.xda-developers.com/showthread.php?t=1021549
did you backup your apps first like using titanium backup??
or maybe this method you can use recovery with nvflash but i think with this method you should have your boot.img backup first i haven't tried this method
Code:
http://forum.xda-developers.com/showthread.php?t=1229407

Alive!
Thank you guys! I get to restart my phone via smartflash, and now I'm scared to flash ROMs via clockworkmod...Thus, I'll be a long time with this official ROM.

sales_jao said:
Thank you guys! I get to restart my phone via smartflash, and now I'm scared to flash ROMs via clockworkmod...Thus, I'll be a long time with this official ROM.
Click to expand...
Click to collapse
nah don't be affraid to flash roms, it has many great roms rather than stock LG. just backup your data at least and then flash any roms you want.
stock LG is crap, your hardware can't show its performance...

antec123 said:
nah don't be affraid to flash roms, it has many great roms rather than stock LG. just backup your data at least and then flash any roms you want.
stock LG is crap, your hardware can't show its performance...
Click to expand...
Click to collapse
Amen to that!

sales_jao said:
Thank you guys! I get to restart my phone via smartflash, and now I'm scared to flash ROMs via clockworkmod...Thus, I'll be a long time with this official ROM.
Click to expand...
Click to collapse
If you've managed to use smartflash then you've got no reasons to be affraid

sales_jao said:
Thank you guys! I get to restart my phone via smartflash, and now I'm scared to flash ROMs via clockworkmod...Thus, I'll be a long time with this official ROM.
Click to expand...
Click to collapse
via CWM is the easiest way..don't waste your time with LG stock ROM

Yeah...You're right guys...Today, I'm gonna try it again...If it goes wrong ... I come to beg your help ....

Installing ROM by CWM issue

Hello. I'm going to install the new android into I9000. In the previous thread you recommend me the Semaphore kernel and Jelly Bean ROMs.
I installed the Semaphore from this topic: http://forum.xda-developers.com/showthread.php?t=1786220 by odin and I need to install zip file with my new ROM by clockworkmod recovery. I tried to install three types of ROMs: cyanogenmod10, c-rom, tsunami, however everyone shows 'error [path to file] (status 0) - installation aborted' when the installation starts.
What am I doing wrong?

przemek211 said:
Hello. I'm going to install the new android into I9000. In the previous thread you recommend me the Semaphore kernel and Jelly Bean ROMs.
I installed the Semaphore from this topic: http://forum.xda-developers.com/showthread.php?t=1786220 by odin and I need to install zip file with my new ROM by clockworkmod recovery. I tried to install three types of ROMs: cyanogenmod10, c-rom, tsunami, however everyone shows 'error [path to file] (status 0) - installation aborted' when the installation starts.
What am I doing wrong?
Click to expand...
Click to collapse
Status 0 is due to having wrong CWM on you phone, likely you are on ICS ROM and using JB kernel and trying to Flash JB ROM

thanks for your answer,
i'm using semaphore JB 2.3.0 Kernel (URL in first post) - the author writes:
This is a kernel based on the pawitp's one and it works for Android 4.1.1 JB ROMs.
This version works for Jelly Bean ROMs
Click to expand...
Click to collapse
I want to install this: [NIGHTLY][ROM][4.1.1] CyanogenMod 10
So could you recommend me other kernel + ROM? Why it happens if i have JB kernel and JB rom?

przemek211 said:
thanks for your answer,
i'm using semaphore JB 2.3.0 Kernel (URL in first post) - the author writes:
I want to install this: [NIGHTLY][ROM][4.1.1] CyanogenMod 10
So could you recommend me other kernel + ROM? Why it happens if i have JB kernel and JB rom?
Click to expand...
Click to collapse
Which date on nightly you trying to install
Sent from my GT-I9000 using xda premium

thanks for so fast answer
I tried the newest version 'experimental' (10/8) and next one "nightly" (10/3), but it looks that the problem are not in ROMs. I tried c-rom, tsunami and there is the same problem.

przemek211 said:
thanks for your answer,
i'm using semaphore JB 2.3.0 Kernel (URL in first post) - the author writes:
I want to install this: [NIGHTLY][ROM][4.1.1] CyanogenMod 10
So could you recommend me other kernel + ROM? Why it happens if i have JB kernel and JB rom?
Click to expand...
Click to collapse
yes kernel will work but CWM does not, so flash the ICS kernel to solve your problem , you are currently on ICS, so use ICS kernel and upgrade to JB, once in JB , use JB kernel

sorry, but i don't understand. i should install the ics kernel, e.g. from here: http://www.semaphore.gr/downloads/gt-i9000-ics and next i need to install JB kernel from sdcard in cwm of ics?

przemek211 said:
sorry, but i don't understand. i should install the ics kernel, e.g. from here: http://www.semaphore.gr/downloads/gt-i9000-ics and next i need to install JB kernel from sdcard in cwm of ics?
Click to expand...
Click to collapse
One you have an ICS kernel, your CWM will be able to Flash a JB ROM in recovery, once you have a working JB ROM, its up to you , IF you would like to have JB Kernel , just Flash that

thank you @xsenam
now i have JB ROM and JB Kernel.
Everything works, but in GB i had the Semaphore settings and now i didn't see that, only Superuser. Should it be in the apps?

przemek211 said:
thank you @xsenam
now i have JB ROM and JB Kernel.
Everything works, but in GB i had the Semaphore settings and now i didn't see that, only Superuser. Should it be in the apps?
Click to expand...
Click to collapse
use Semaphore kernel manager for JB http://forum.xda-developers.com/showthread.php?t=1886686

Ok, so again: thank you and sorry for my mistake in your nick @xsenman
Greetings from Poland for Republika ng Pilipinas

sadly i have one more issue, i've inserted my sim card and the phone shows: mobile network not available, when i'm going to search mobile networks it shows: 'error while searching for networks'. I tried to ON&OFF aeroplane mode (as i read in google), but it doesn't help.

przemek211 said:
sadly i have one more issue, i've inserted my sim card and the phone shows: mobile network not available, when i'm going to search mobile networks it shows: 'error while searching for networks'. I tried to ON&OFF aeroplane mode (as i read in google), but it doesn't help.
Click to expand...
Click to collapse
just check if you still have your IMEI, if not use a solution from My Android Solutions to fix it
BUT make sure you inserted your sim card in the correct direction

No i don't have an IMEI (checked by *#06# code, shows only "IMEI" without the number). So, if i didn't make a backup i need to flash an old ROM, go to CWM and make a wipe, delete EFS folder with root explorer and install the ICS kernel with Phone EFS Clear ticked?
I have next problem. My i9000 resets byself and goes to CWM. He made it for three times when i didn't use him.

przemek211 said:
No i don't have an IMEI (checked by *#06# code, shows only "IMEI" without the number). So, if i didn't make a backup i need to flash an old ROM, go to CWM and make a wipe, delete EFS folder with root explorer and install the ICS kernel with Phone EFS Clear ticked?
I have next problem. My i9000 resets byself and goes to CWM. He made it for three times when i didn't use him.
Click to expand...
Click to collapse
NO, all you need to do is , was written in above link
1) Download Root Explorer from Play Store and use it to
2) Search you internal SD card for sdcard/backup/efs
3) Copy nv_data.bin, nv_data.bin.md5 and nv.log paste them into /efs in your Phone memory
4) Reboot to get back your original IMEI
or
you can start from the beginning.. go back to GB 2.36 (use a JVU ROM + Root, upgrade to ICS CM 9 and than to CM10

First of all I installed twrp 2.2 and I felt into bootloop so I flashed Bootloader.tar and now my phone is working good;but I have a question ;If I go into recovery mode next time I will be in bootloop again and I must flash bootloader again?!
Sorry for my bad English!

alireza7991 said:
First of all I installed twrp 2.2 and I felt into bootloop so I flashed Bootloader.tar and now my phone is working good;but I have a question ;If I go into recovery mode next time I will be in bootloop again and I must flash bootloader again?!
Sorry for my bad English!
Click to expand...
Click to collapse
you can flash a CWM 6.0 or TWRP 6.0 to recover , IF your current TWRP is bad ,

xsenman said:
2) Search you internal SD card for sdcard/backup/efs
Click to expand...
Click to collapse
I don't have this backup folder

przemek211 said:
Hello. I'm going to install the new android into I9000. In the previous thread you recommend me the Semaphore kernel and Jelly Bean ROMs.
I installed the Semaphore from this topic: http://forum.xda-developers.com/showthread.php?t=1786220 by odin and I need to install zip file with my new ROM by clockworkmod recovery. I tried to install three types of ROMs: cyanogenmod10, c-rom, tsunami, however everyone shows 'error [path to file] (status 0) - installation aborted' when the installation starts.
What am I doing wrong?
Click to expand...
Click to collapse
if you have cwm(any version)
you can install whatever rom you have
if you are on other bases like GB or ICS and trying to install JB or new versions of cm10
you should do the installing process three times
there will be an error after first try and on the second it will install but you will get bootloop and you have to take out battery put it back and boot to recovery with three button combo and start the third time of install process after that do a restart and you are done
good luck :good:

thanks for your reply, but I solve that problem with @xsenman help. Now I have issue with mobile network.
@xsenman: i understand that i need to install old rom from your post and just make upgrade to ics? Or should I make any other steps in this tutorial?

Stock ICS --> JB Leak?

Hi all,
I know similar questions have been asked literally hundred times, but as a complete noob to roms, I want to make sure that I get a full set of instructions and then I won't brick my phone. I want to upgrade my note to this JB Rom by cronosmachine. I'm on stock ICS 4.0.4. Never rooted or did modding to the phone. No kernel change (which I know nothing about), nothing.
I'm not sure how much info you guys will need but here are the basics:
Baseband version: N7000XXLRB
Kernel version: 3.0. 15-1115729
[email protected] #3
SMP PREEMPT Thu Sep 20 00:40:29 KST 2012
Build number: IMM76D.ZSLPN
I know that I have to first root my phone to get CWM? My guess is to follow method 1 on [24sept12]How to Root/Unroot Samsung Galaxy Note + CWM?
And then from there I don't know what to do in order to get the ROM onto my phone.
And is there anything else I need to be aware of?
Appreciate any kind of help.

yes first root usin 1a method using philz kernel.
Once done, you will have root and cwm and is a safe kernel.
Download the zip file of the rom you want to flash and place it on internal or external sd card.
boot into recovery now (vol up +power+home)
go to mounts and storage
format/system
format/data
format/cache
go to advanced
wipe dalvik cache
go back
install zip.
point to the rom you downloaded.. and wait for it to install. that's all. see your phone booting into jb.
hope that was clear enough

nokiamodeln91 said:
yes first root usin 1a method using philz kernel.
Once done, you will have root and cwm and is a safe kernel.
Download the zip file of the rom you want to flash and place it on internal or external sd card.
boot into recovery now (vol up +power+home)
go to mounts and storage
format/system
format/data
format/cache
go to advanced
wipe dalvik cache
go back
install zip.
point to the rom you downloaded.. and wait for it to install. that's all. see your phone booting into jb.
hope that was clear enough
Click to expand...
Click to collapse
On Phils' post where I can download the rooted kernel, I don't see XXLRB (my baseband version), but I do see a ZSLPN (my build number). Is the ZSLPN the one i'm supposed to download?

rcheung28 said:
On Phils' post where I can download the rooted kernel, I don't see XXLRB (my baseband version), but I do see a ZSLPN (my build number). Is the ZSLPN the one i'm supposed to download?
Click to expand...
Click to collapse
Yes, bas band refers to the modem, Build Number is rom.
Sent from my GT-N7000 using xda premium

Thanks SpyderTracks.
One more question before I pull the trigger, can all this be done with the "internal" SD card? Or does it have to be an external SD?

stock recovery doesnot allow installation from internal SD. so external is required. but you can use PC odin to install it, but it will leave a yellow triangle and increase the counter. later you can use triangle away app to reset it, Final call is yours.,

So after I installed philz's root and safe kernel, I went into recovery to wipe data cache system, went also wiped dalvik. Then I went to the main menu, chose install zip, tried to select choose zip from sdcard, but it keeps giving me this error: E:Can't mount /sdcard/

Nevermind, I managed to install from internal SD. But I'm not liking the ROM that much, so I plan on flashing CM10 Nightly to try it out.
On the CM10 thread, it says that I shouldn't be on a ROM based on stock. What I want to do is to flash CM9. But in order to do that, I'm not sure if I'm already on a safe kernel (after rooting using dr.ketan's 1a method (Phil's)).

what rom are you on now?

nokiamodeln91 said:
what rom are you on now?
Click to expand...
Click to collapse
I'm on this rom, it's a tw based rom based on the leaked jb ls7?

I am not sure what kernel it has. boot into recovery and check what you see.. If it's philz the you can just flash the cm10 on it. else. install philz xxls7

nokiamodeln91 said:
I am not sure what kernel it has. boot into recovery and check what you see.. If it's philz the you can just flash the cm10 on it. else. install philz xxls7
Click to expand...
Click to collapse
I'm not sure either, I booted into recovery, went into Philz Settings > about, and got CWM base 6.0.1.5, and PhilZ Touch 3.00 (n7000).
And what you're saying is that if I'm on Philz xxls7 kernel, I can go right to flashing CM10, without worrying the "do not flash on stock based ICS fw" (even though I'm on jb)?

Yes.. you are on philz kernel and you can directly install CM10

nokiamodeln91 said:
Yes.. you are on philz kernel and you can directly install CM10
Click to expand...
Click to collapse
Thanks for the information. But I want to know what makes my case an exception from
- Make sure to run CM9 or an AOSP-based ROM : FLASHING FROM STOCK ICS OR ROMS BASED ON STOCK ICS WILL RESULT IN A BRICK! - You're warned!
Click to expand...
Click to collapse
.
I'm on a JB rom but it's based on stock, isn't that essentially the same as based on stock ICS?

the warning was when the safe ics kernels were not in effect.

nokiamodeln91 said:
the warning was when the safe ics kernels were not in effect.
Click to expand...
Click to collapse
Thanks for the quick reply!! When I get home, I'll try this out!
So what I need to do is
put the zip files onto my SD,
reboot into recovery,
install the rom,
install google apps,
wipe data,
factory reset,
reboot into cm10
I don't need to wipe system/cache/dalvik??

once in recovery
mounts & storage
format/system & data & cache
then install rom & gapps

nokiamodeln91 said:
once in recovery
mounts & storage
format/system & data & cache
then install rom & gapps
Click to expand...
Click to collapse
Thanks a lot for guiding me through this, everything worked out perfectly!

great. now enjoy the cm10..:thumbup::thumbup::thumbup:

How come even after I performed format system cache data dalvik, some of the settings are still left on the phone? e.g. previously saved wireless networks, wallpapers... How can I completely start from scratch?

[Q] Can't install other roms just ics

Hy!
After I changed gb layout to ics layout, I installed a rom ([ROM] ICS-android 4.0.4-FLEX-ICER), which works me perfectly, but if i'd like to change for another rom (new ics bootloader roms) CWM can't flash it. I changed the layout with all-in-one toolkit. CWM is v6.0.1.5. What can I do? Thank you for your answers

Strange issue ^^'
Did you format system ?
Or maybe try reflahing CWM (don't remember which version is for New ICS unlocked bootloader)
Or a good NVflash as usual

Mynix said:
Strange issue ^^'
Did you format system ?
Or maybe try reflahing CWM (don't remember which version is for New ICS unlocked bootloader)
Or a good NVflash as usual
Click to expand...
Click to collapse
I see all my internal storage, i made fortmat in cwm try install other roms, but nothimg change can i change cwm with all in one toolkit? Or change back to gb partition layout? I`m a little bit noob so...

Yes haven't tried but for sure you can flash cwm from AIO toolkit and also go back to GB layout too
I think you should try to NVflash a rom (ICS or GB bootloader) then root (AIO) flash a cwm recovery (Still from the perfect AOI toolkit) and reflash the rom you want from cwm, that's the cleanest way

Mynix said:
Yes haven't tried but for sure you can flash cwm from AIO toolkit and also go back to GB layout too
I think you should try to NVflash a rom (ICS or GB bootloader) then root (AIO) flash a cwm recovery (Still from the perfect AOI toolkit) and reflash the rom you want from cwm, that's the cleanest way
Click to expand...
Click to collapse
Could you suggest me a rom? Or i need to flash original rom? (thank you for your help )

Sometimes the problem lies with your downloaded rom. Maybe its corrupted and not downloaded properly. Try redownloading it or download a new compatible ROM. DjangoManouche X 1.2.1 by carburano works for me.You can give that a try. Or ParanoidAndroid v2.5 by tonyp.

Everyone forgets to flash this special recovery when wanting to flash CM10 based roms:
http://forum.xda-developers.com/showthread.php?t=2058231
read the post, flash the special recovery, then bam you'll be able to flash your new rom.

[Q] Unable to install Jellybean

Hi all,
Can someone guide me (step by step) how to install jellybean on my device.
Device details:
Model: Spice Mi410
ROM: MacLite-FB0 v1.3 (GB 2.3.4)
Kernel: Apps_2.6.32.9-perf
CWM: Recovery v5.0.2.3
Baseband: PR232
I want to install "cm-10-Ideos-X6-v0.2".
So, I got the ROM and also got the kernel "35.7-oct.4-cmx" & recovery menuu "Recovery Menu 2.0.0.1 for 4XXX baseband (kernel 2.6.35.7)".
Now, can someone guide me the sequence of operations to install JB?
I tried different combination of sequences CWM, Kernel & ROM but couldn't do it
(If I flash CWM first then I don't get recovery menu again so can't flash the ROM.
If I flash ROM first then it doesn't boot. I can go to the recovery menu and flash the CWM but it didn't help.
Also flashing kernel at all different point, didn't help me.)

1. Put the downloaded new rom. (.zip) to your SD card
2. Install Tjstyle RC3 via SUT 1.8 (RC3 comes with CWM preinstalled.)
3. Go to 'backup and restore ' and take a backup
4. Format Data, Cache and Dalvik
5. Install the zip from SD card
6. Reboot system and you are done
7. Reboot once again and login to your google account
...

Pranjal123 said:
1. Put the downloaded new rom. (.zip) to your SD card
2. Install Tjstyle RC3 via SUT 1.8 (RC3 comes with CWM preinstalled.)
3. Go to 'backup and restore ' and take a backup
4. Format Data, Cache and Dalvik
5. Install the zip from SD card
6. Reboot system and you are done
7. Reboot once again and login to your google account
...
Click to expand...
Click to collapse
Many Thanks Pranjal... took some as I had some problem installing SUT in my windows 8 machine... finally, I could do it with windows 7 machine...
Now on CM10

Great!
Don't forget to hit the THANKS button....

Installed the latest (v.02) CM10 by Dr. Rush... tried the calender thing as suggested... but calender keeps crashing whenever i try to sync with my google account... it says "unfortunately, calender has stopped"
also issue with the camera... doesn't show preview & crashes... similar message "unfortunately, gallery has stopped"
any suggestion on this???

Remove the camera data
And look here - http://forum.xda-developers.com/showpost.php?p=41607437&postcount=116

bhanware said:
Hi all,
Can someone guide me (step by step) how to install jellybean on my device.
Device details:
Model: Spice Mi410
ROM: MacLite-FB0 v1.3 (GB 2.3.4)
Kernel: Apps_2.6.32.9-perf
CWM: Recovery v5.0.2.3
Baseband: PR232
I want to install "cm-10-Ideos-X6-v0.2".
So, I got the ROM and also got the kernel "35.7-oct.4-cmx" & recovery menuu "Recovery Menu 2.0.0.1 for 4XXX baseband (kernel 2.6.35.7)".
Now, can someone guide me the sequence of operations to install JB?
I tried different combination of sequences CWM, Kernel & ROM but couldn't do it
(If I flash CWM first then I don't get recovery menu again so can't flash the ROM.
If I flash ROM first then it doesn't boot. I can go to the recovery menu and flash the CWM but it didn't help.
Also flashing kernel at all different point, didn't help me.)
Click to expand...
Click to collapse
u must update the kernel to .35