Soft bricked and need help - Galaxy S I9000 Q&A, Help & Troubleshooting

ok so i obviously didnt think things though before doing this, i have an I9000 which was on GB 2.3.4. i decided to flash semaphore's 2.9.0 kernel and i tried installing nightly's Cm 10.1 rom on my device but to no avail as i keep receiving status 0. now i thought it was a bad download but it wasnt as i was able to extract the zip file without any problems, i then proceeded to download other roms as well to try to see if i could install any of it. im already up 8 hours and i still can seem to install anything on it.. worst thing is i've forgotten what baseband i was on so im stuck with an unusable phone. are there any solutions to this?

You can try to go back to GB via Odin.
Sent from my GT-I9000 using xda app-developers app

is there like a universal rom that i can go back to ? im kinda a noob with flashing samsung roms haha. and i've tried flashing a jw4 stock rom but it doesnt allow me to partition my sd card. and once im done flashing the screen just shows a bunch of messed up colours and then i get into a bootloop.

I always follow this link whenever I want to go back to GB and I don't experience any problem:
http://forum.xda-developers.com/show...65&postcount=1
Be sure your phone is recognized by your PC. If not, you can install the USB drivers.
Here is a link for the USB drivers:
http://forum.xda-developers.com/show...43&postcount=1
From GB Rom, you can decide to upgrade to ICS, then to JB.
But the important thing first is to make your phone running in GB with all features functioning normally.
Good luck.

the GB link is broken; well i managed to install a copy of JW4 BB running on 2.3.6 but wifi and physical home button is broken. from there i proceeded to flash with odin a Cm9 kernel, and did a full wipe and everything and then installed a nightly's cm9.1 rom. Problem is it installs successfully but it doesnt boot into the rom, instead it goes back into CWM after reboot.

Slow7u said:
the GB link is broken; well i managed to install a copy of JW4 BB running on 2.3.6 but wifi and physical home button is broken. from there i proceeded to flash with odin a Cm9 kernel, and did a full wipe and everything and then installed a nightly's cm9.1 rom. Problem is it installs successfully but it doesnt boot into the rom, instead it goes back into CWM after reboot.
Click to expand...
Click to collapse
So i managed to flash CM9.1 and got it to boot, but the home button and the soft press buttons are not working. in addition, phone automatically goes to landscape when i enter settings.

I don't know why link was broken. Can you try again with this link:
http://forum.xda-developers.com/showpost.php?p=8805265&postcount=1
It should work well on your phone. You can use this as base in case you want to upgrade to ICS then to JB.
Device: GT-i9000
Rom: JB 4.2.1 C-RoM BeaN v2
Kernel: Mackay 0.230
Baseband: I9000BVJJPG

i appreciate your help but the download link leads to me an ad which then just prompts to download a software called ilividsetup.exe. Are there any other links to download that rom? so sorry for the trouble

The rar file seems already removed or the link is down. Sorry about that.
Device: GT-i9000
Rom: JB 4.2.1 C-RoM BeaN v2
Kernel: Mackay 0.230
Baseband: I9000BVJJPG

http://lnx.lu/0JRr thats the link it leads me to lol
ahh thats alright

Slow7u said:
i appreciate your help but the download link leads to me an ad which then just prompts to download a software called ilividsetup.exe. Are there any other links to download that rom? so sorry for the trouble
Click to expand...
Click to collapse
On the top right corner you'll see a 5 second countdown followed by a skip ad button. Click the skip ad button and it'll take you to the download link.
Sent from my Galaxy Nexus using xda premium

NIMBAH said:
On the top right corner you'll see a 5 second countdown followed by a skip ad button. Click the skip ad button and it'll take you to the download link.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
after clicking the skip Ad button it just prompts another download

NIMBAH said:
On the top right corner you'll see a 5 second countdown followed by a skip ad button. Click the skip ad button and it'll take you to the download link.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
You can also download stock roms from samfirmware
But you need to make a account
Succes
(Sorry for bad English)

redheavy said:
You can also download stock roms from samfirmware
But you need to make a account
Succes
(Sorry for bad English)
Click to expand...
Click to collapse
yeah i did. I am able to go back to stock JW4 but I cant go any further than 2.3.6. every single rom that i install only leads to me to a loop back to CWM. so far i've only managed to install nightly's CM9.1 and even that is pretty much unusable for me because soft press buttons and home button doesnt seem to work. looks like im stuck on 2.3.6

Slow7u said:
after clicking the skip Ad button it just prompts another download
Click to expand...
Click to collapse
Yeah, I have noticed that. All of the firmware links to fileshare sites take you to some other place where you are prompted to download a program called 'download manager'. What's all that about? Anyone know?

After you install the ROM, it just boots back to CWM, right? I had encountered similar problem, unfortunately I do not know if it's thr same. I installed the ROM through CWM, phone booted into CWM based CM10 recovery. Nothing more. Then, I fully wiped the phone again and installed the rom the second time. Then gapps and vuola!
Sent from my GT-I9000 using xda premium

Svolacius said:
After you install the ROM, it just boots back to CWM, right? I had encountered similar problem, unfortunately I do not know if it's thr same. I installed the ROM through CWM, phone booted into CWM based CM10 recovery. Nothing more. Then, I fully wiped the phone again and installed the rom the second time. Then gapps and vuola!
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
You will need to flash the ROM twice when flashing CM10 as it uses a different partition layout.
Sent from my Galaxy Nexus using xda premium

NIMBAH said:
You will need to flash the ROM twice when flashing CM10 as it uses a different partition layout.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
That explains everything then, thanks!
Sent from my GT-I9000 using xda premium

Yeah when you first install the ROM via cwm it will reboot itself once especially if youre on an older version of cwm. Thing is I've flashed the ROM 3 times and it still does the same thing which is rebooting itself into cwm. I've just exchanged a new device with the shop I bought it from and I don't think I'm gonna do anything with it anymore and just let it stay on the ROM its on. Though I'm curious about one thing, I managed to get to cm9.1 but the home buttons and the soft press buttons don't work At all. Any idea as to why that happened ?
btw it comes with a preinstalled lidroid rom which is 2.3.4. and its pre rooted; its BB is I9000ZSJPJ, are there any roms out there for this BB?
Sent from my Xperia X10 using XDA Premium HD app

Related

[Q] I have a SGS on UK Orange

...
I want to Flash/Install different ROM on my phone but I don't have 3 button recovery... I also believe I will need to root it? Not sure if I've read correctly...
I'm guessing I first need to get the 3 button recovery working? Do I need to download something for this? Will I need to root the phone before this step, or afterwards?
Then do I use Odin (1.3) to install the new ROM?
I have downloaded the Android SDK (for adb), a fix file for the 3 Button recovery, Odin 1.3. Is there anything else I will need to carry out all of the above?
Very grateful for any help.
I have international I9000 and I used these instructions, they're in Russian, you can translate them with google
searching for the file that is mentioned there I could find this, which is the same
rooting is another thing, this one is for replacing bootloader
another manuals
Davey Boy said:
...
I want to Flash/Install different ROM on my phone but I don't have 3 button recovery... I also believe I will need to root it? Not sure if I've read correctly...
I'm guessing I first need to get the 3 button recovery working? Do I need to download something for this? Will I need to root the phone before this step, or afterwards?
Then do I use Odin (1.3) to install the new ROM?
I have downloaded the Android SDK (for adb), a fix file for the 3 Button recovery, Odin 1.3. Is there anything else I will need to carry out all of the above?
Very grateful for any help.
Click to expand...
Click to collapse
Read other post regardig making jig easy as abc
Sent from my GT-I9000 using XDA Premium App
Ok, so I've got the 3 button recovery working, rooted (not sure if this step is necessary?), unlocked... is there anything else before I flash a newer ROM to the handset? (of course, I will make sure I've backed up the phone too).
Also, if you could suggest a ROM for me to download. Would like the latest stable release of android (I'm guessing one of the variants of Froyo? Currently running Eclair).
Thanks.
Rom Kitchin build your own .
I am using
XWJS8 with JPX modem CSC using CPW as it covers most of UK networks .
http://forum.xda-developers.com/showthread.php?t=817703
http://romkitchen.org/sgs/?s=generator
jje
I've created a ROM with the above properties... I think I've got everything right. I have the 3 button recovery though if things go t*ts up though, right? lol
Davey Boy said:
I've created a ROM with the above properties... I think I've got everything right. I have the 3 button recovery though if things go t*ts up though, right? lol
Click to expand...
Click to collapse
You may need to flash that kitchen rom twice i found this with kitchen roms good luck
Sent from my GT-I9000 using XDA Premium App
Thanks for the tip!... Just trying to get clockworkmod recovery to load up on rebooting the handset... I have to rename update.zip on the internal sd card I believe??
Davey boy - make sure you can get into download mode before you go any further.
Sent from my GT-I9000 using XDA Premium App
When holding volume down, home and power I get "Downloading... Do not turn off Target!!!" - That's right isn't it?
I still can't seem to be able to access the ClockworkMod Recovery though on rebooting the handset (after renaming the original update.zip on my internal SD card to aupdate.zip) - Any suggestions?
Update .
Is the name usually .
jje
I ended up installing JV1 from samfirmware, but am wanting to downgrade it to a later Froyo build. Or a custom ROM... not sure yet.
How would I got about installing a "ROM Kitchen" ROM manually? I can't load ClockworkMod Recovery to install from SD card.
Edit: Just going to reinstall Eclair and install the ROM through CWM that way.
Hi small question someone might know how do you do a carrier firmware backup? Before you do the reflash?
Are you sure you're pressing the right combination?
Press volup + power + home
And release them when Samsung logo appears, or it will just reboot again
Yep, that was the combination I used. Managed to get it all running using the latter method.
Sent from my GT-I9000 using XDA App

[Q] SGS keeps rebooting after flashed .zip file with CWM

Hi, pls help me.
My SGS 2.3.3 running CF-Root-XX_OXA_JVO-v3.2-CWM3RFS.zip, then i flashed up with Circular battery.zip (from Juwe's Rom) and install it with CWM (just want to try up as i never do before), after flashing, my SGS keeps rebooting after loading booting amination in 5 seconds and never stop until i remove the battery. I put in battery again, switch on, but same, it still keeping reboot. I'm a beginner. I very regret now after flashing .zip file with CWM.
Pls help me.
Regards
Reflash 3 part firmware with odin, I recommend ezbase, for stock +root, and don't panic, as long as you can get download mode all can be saved, stay calm
Sent from my GT-I9000 using XDA Premium App
slaphead20 said:
Reflash 3 part firmware with odin, I recommend ezbase, for stock +root, and don't panic, as long as you can get download mode all can be saved, stay calm
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Yeah he is coorect y'all you have is a bootloop, I have been in this situation a lot
Just flash as mentioned above and everything will be fine
Sent from my GT-I9000 using XDA Premium App
Thanks for claming me down. I'm try to flash back the original firmware 2.3.3 DJV9 from http://forum.xda-developers.com/showthread.php?t=1102881, hope everything will be fined.
BOTAKNOB said:
Thanks for claming me down. I'm try to flash back the original firmware 2.3.3 DJV9 from http://forum.xda-developers.com/showthread.php?t=1102881, hope everything will be fined.
Click to expand...
Click to collapse
Hope it works, pm me or post here if you need more help, and if ive helped you press my thankyou button
Sent from my GT-I9000 using XDA Premium App
slaphead20 said:
Hope it works, pm me or post here if you need more help, and if ive helped you press my thankyou button
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Had successfully flashed with original firmware 2.3.3 DXJV9 and did the factory reset. However all my sms has gone .
Btw, what is the best root kernel for this firmware?
I'm pretty sure JVO and JV9 are the same in kernel aspects so you should be able to use CF Root 3.2 JVO. The reason for these boot loops might have been because of the rom you were using, if it was a stock one it's no wonder it went into boot loops as Juwe's rom is deodexed so the addon would definitely not work. If it was a deodexed I'm not sure how it could have happened. But really the addon was made for Juwe's rom so unless you were running it it wasn't really the addons fault. Tips for the future: Make a backup in CWM, saves a lot of hassle with odin and saves your stuff. Have a CWM flashable rom on your SD card which saves you needing odin to recover. Hope this helps

[Q] overcome rom

Hi,
device info:-
samsung galaxy tab p1000
running 2.3.3 stock firmware
rooted with doomslord kit
i am new to flashing an android
i have downloaded and decrypted a firmware from checkfus downloader
question:-
1. Is the overcome's stock safe v5 zip and the checkfus downloaded zip same???
Please reply asap.
Wholehearted thanks for your help
I think checkfus downloads are many. You can't compare. They differ even amongst each other.
Overcome stock safe zip is not just a rom.
It is a package containing Odin, drivers, and modem radios, as well as JQ1 stock rom.
Sent from my GT-P1000 using XDA
Thanks Priyana,
heard a lot about you, great helper and developer. just need a little help...
i am a complete newbie in flashing android. matter of fact i havent even once rebooted my phone into download or recovery mode.
i did a factory reset today...i need a complete step by step guide to flash overcome kernel 4.0.0 via mobile odin and aokp build 38 later.....
please help....
thanks
When you say factory reset do you mean the "Factory data reset" under privacy? or did you successfully install the Safe-Stock-Rom from Overcome's website?
There is a complete guide to how go from stock rom to Overcome 4.1.0 here: http://www.teamovercome.net/p1000/?page_id=17
I successfully completed it the other day and works perfectly on my Galaxy Tab.
SGTABHI said:
Thanks Priyana,
heard a lot about you, great helper and developer. just need a little help...
i am a complete newbie in flashing android. matter of fact i havent even once rebooted my phone into download or recovery mode.
i did a factory reset today...i need a complete step by step guide to flash overcome kernel 4.0.0 via mobile odin and aokp build 38 later.....
please help....
thanks
Click to expand...
Click to collapse
Hi SGTABHI,
You have heard wrongly. I am not a dev, just a busy body trying to help
Dimitrix points rightly to overcome guide.
The images there are broken, so go here instead
Go to
http://forum.xda-developers.com/showthread.php?p=20974872
See the guy phlooke posted a cached copy of the overcome guide.
Download it, it is a .PNG graphic file.
Now, you don't need to go through the whole restocking. We only need an overcome kernel 4.0 so that you have cwm.
So,
1) download overcome 4.0 kernel tar file and keep it in your PC
2) download aokp build 38 and gapps-ics from the link in aokp post. Put both on external SD card.
3) read the guide and jump to the part that guides you to flash overcome kernel.
Make sure Odin can see your tab and everything looks exactly like in the picture.
4) flash the overcome kernel and the tab will reboot. There will be a female robotic voice. Stimpz0r recommend no need to wait for finish. Just force power off the tab.
5) power up to recovery by pressing volume up and power button.
I find it a bit tricky sometimes, maybe the way I hold the button. But you will get there.
6) from cwm recovery, choose to install update from external SD card and browse to aokp zip file and install. Some message about checking bml/mtd and you see the tab reboot.
7) you may get a boot loop, it may not boot into recovery, or it may go direct back to recovery. If it does that it is normal.
First time coming from bml to mtd will do that.
Just flash aokp one more time.
You will notice the cwm is not the overcome one anymore. It looks similar but it is not. You will have to browse to internal SD card instead, because this recovery somehow calls your external SD as internal SD.
8) so flash aokp again, and when completed, flash gapps-ics
9) when completed just reboot and sit back and wait till it is done!
Remember if anything go wrong you may have to restock to gb stock safe. But quite unlikely.
Good luck.
Sent from my GT-P1000 using XDA
I have just wasted quite a bit of your time. Seems like you are asking about Mobile Odin !
But anyway it should be the same.
Just put overcome kernel tar in sdcard and use mobile Odin to flash it.
I am not familiar with mobile Odin, but it should match closely to Odin.
One guy even told me it works for restocking to stock safe!
Sent from my GT-P1000 using XDA
i did a factory reset through privacy.....
thanks for helping.....is there any chance of bricking my tab
incase i brick it can i flash the checkfus downloaded via odin in download mode
thanks once again
Little chance to brick.
Brick only happens if you broke the boot loader.
Yes, I guess flashing checkfus download via Odin should kind if "restock".
Sent from my GT-P1000 using XDA
here is a complete tutorial of how to flash overcome with all the images on a pdf file, http://forum.xda-developers.com/showthread.php?t=1500820
Sent from my GT-P1000 using Tapatalk 2
priyana said:
Hi SGTABHI,
......
Now, you don't need to go through the whole restocking. We only need an overcome kernel 4.0 so that you have cwm.
So,
1) download overcome 4.0 kernel tar file and keep it in your PC
2) download aokp build 38 and gapps-ics from the link in aokp post. Put both on external SD card.
3) read the guide and jump to the part that guides you to flash overcome kernel.
Make sure Odin can see your tab and everything looks exactly like in the picture.
4) flash the overcome kernel and the tab will reboot. There will be a female robotic voice. Stimpz0r recommend no need to wait for finish. Just force power off the tab.
5) power up to recovery by pressing volume up and power button.
I find it a bit tricky sometimes, maybe the way I hold the button. But you will get there.
6) from cwm recovery, choose to install update from external SD card and browse to aokp zip file and install. Some message about checking bml/mtd and you see the tab reboot.
7) you may get a boot loop, it may not boot into recovery, or it may go direct back to recovery. If it does that it is normal.
First time coming from bml to mtd will do that.
Just flash aokp one more time.
You will notice the cwm is not the overcome one anymore. It looks similar but it is not. You will have to browse to internal SD card instead, because this recovery somehow calls your external SD as internal SD.
8) so flash aokp again, and when completed, flash gapps-ics
9) when completed just reboot and sit back and wait till it is done!
.....
Sent from my GT-P1000 using XDA
Click to expand...
Click to collapse
This is the BEST AOKP install instruction I've ever seen! I will bookmark this for reference just in case anyone need this.
Priyana, thanks a lot for the guidea mate, very helpful.
Thinking of flashing my Tab with CM9. Some questions though.
How easy will it be for me to revert from ICS straight back to Overcome? Can I just flash Overcome kernel again, then flash Overcome ROM?
Will that work?
Also quick question while we are here, how stable is ICS? Can it play 3D games like Fifa and Nova without crashing?
Cheers mate!
Sent from my GT-P1000 using xda premium
olyloh6696 said:
Priyana, thanks a lot for the guidea mate, very helpful.
Thinking of flashing my Tab with CM9. Some questions though.
How easy will it be for me to revert from ICS straight back to Overcome? Can I just flash Overcome kernel again, then flash Overcome ROM?
Will that work?
Also quick question while we are here, how stable is ICS? Can it play 3D games like Fifa and Nova without crashing?
Cheers mate!
Sent from my GT-P1000 using xda premium
Click to expand...
Click to collapse
No, you will need to do repartition with the correct pit file to go back to GB. You will need to do it via odin or heimdell.
ICS now is quite stable for daily use. but some lags in some 3d games.
Thanks a lot priyana...
I successfully updated my tab to aokp ics.....an everything is just fine and perfect.......only the first boot scared me to death as it took 5 mins but after that only 10 secs...thanks a ton
bluetooth receives every format except apk..... any solution?????
Some sort if security I think.
The only way is to rename it first.
I might be wrong.
Sent from my GT-P1000 using xda app-developers app
SGTABHI said:
Thanks a lot priyana...
I successfully updated my tab to aokp ics.....an everything is just fine and perfect.......only the first boot scared me to death as it took 5 mins but after that only 10 secs...thanks a ton
bluetooth receives every format except apk..... any solution?????
Click to expand...
Click to collapse
10 sec boot?? My tab takes 2-3 mins to boot: first 2 boot logos, then black screen(1.5 mins), then laggy boot animation (1 min). Is that normal? B#38
Sent from my GT-P1000 using Tapatalk 2
I found out a solution......use Bluetooth explorer by medieval soft....and install it on both android devices...the received and the sharing device....then open it's directory and it's done......
10 secs thing was written out of ecstasy..... but my tab takes no longer than 20 secs......
Priyana can you guide me about changing the default boot animation .....
Your guides are perfect....
Sent from my GT-P1000 using xda app-developers app
SGTABHI said:
I found out a solution......use Bluetooth explorer by medieval soft....and install it on both android devices...the received and the sharing device....then open it's directory and it's done......
10 secs thing was written out of ecstasy..... but my tab takes no longer than 20 secs......
Priyana can you guide me about changing the default boot animation .....
Your guides are perfect....
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hi,
Sorry, I am not that well versed in boot animation.
But one member, yappoe, have done a few alternative animations and he posted them on theme sub forum.
You can have a look there.
Sent from my GT-P1000 using xda app-developers app
How can i remove status bar while playing games...i want them fullscreen...i tried enabling shadow mode...pls help
priyana said:
Hi,
Sorry, I am not that well versed in boot animation.
But one member, yappoe, have done a few alternative animations and he posted them on theme sub forum.
You can have a look there.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
As long as you installed AOKP SGT7 or CM9 correctly you shoul have root access.
1. Download Root Explorer from Google Play store if you don't have one yet.
2. Download the bootanimation zip file and rename it to bootanimation.zip
3. Using Root Explorer, go to /system/media folder. Change access to R/W by click the R/W button on the top.
4. Find and rename the original bootanimation.zip to origboot.zip.bak.
5. Move the new downloaded bootanimation.zip to /system/media
SGTABHI said:
How can i remove status bar while playing games...i want them fullscreen...i tried enabling shadow mode...pls help
Click to expand...
Click to collapse
IN AOKP SGT7:
1.Go to System Settings > Rom Manager> Navigation Bar > tick Auto hide.
This only work if the games or apps actually support auto full screen.
2. On home screen, Add > Shortcut > System UI >Toggle NavBar
This will allow you to manually do hide NavBar/status bar for full screen.
3. Go to System Settings > Rom Manager > Power Menu Options > tick Show Navigation Toggle. When you want full screen, just long press power button, you will notice new Navigation Bar Controls toggles. Press the power toggle under there.
The ebook app from original samsung doesn't work in aokp....app not installed......any solution....one of the best apps i've ever seen

Broken LockScreen (JB)

Hi XDA im new there i was looking for this issue everywhere but doesnt seems like its somewhere
when i installed Jelly bean i had fully working device but i pressed lock button and there it started when i want to unlock it i have screen like this
dl.dropbox.com/u/55724162/DSC_0885(.DOT)JPG
I used 3 versions of CM 10 JB
Still same issues and my Recovery is CWM 6.0.0.8
Thx in advance
Cant use link but i think its important to see it so please be nice
What specific tab do you have?
Edit and what rom
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
I have P7310
Tested these jelly beans:
cm-10-20121111-UNOFFICIAL-p5wifi
cm-10-20121025-UNOFFICIAL-p5wifi
cm-10.1-20121222-UNOFFICIAL-p5wifi
and in everyone i got this issue right after first attempt to unlock from sleep mode (via lockscreen)
same AOSP_14-01-2013_Beta-14 P5wifi
Well your picture doesn't look good, can't do much on it can you? Does it only do it on the cm10 roms? I'm not sure what to tell you but I'd try fixing permissions in your recovery.
What recovery are you using and how did you flash it. Factory reset, wipes, etc
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Bassicaly i did all wipes then instaled rom then Gapps and then rebooted
Like i said my recovery is this Clockwork_Recovery_6.0.0.8_GT-P7310_alternate
And if you flash the stock rom it doesn't do it. You might try that to rule out hardware issues
Edit: found someone else who had a similar problem. There is an issue with the boot loader. If you odin the stock rom and then flash the cm rom. That fixed it. You'll of course, have to reinstall your recovery and root.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Just tried one stock rom and it says
Finding update
Opening
Installing
Inslalation aborted
// I got that its ok to moment when i push lock/unlock button . When i had it on Charger i saw the battery ok but after i pressed lock it goes scattered/distorded like i show u picture. I really dunno what this is but im going via backup back to my gingerbread *SADNESS*
Where did you get the stock rom? Go to sammobile.com for it. You have to register, but it's free you'll download a zip file. Use 7-zip to extract the .tar.md5 file from it. Use that in Odin, PDA.
Sent from my SAMSUNG-SGH-I957 using xda app-developers app

Galaxy S stuck on custom rom logo

HI, so recently i brought a galaxy s gt i9000. I wanted to flash a custom rom so I install cwm and now have root access. problem is whenever i try to install a custom rom it shows the bar for installation in CWM and then goes to the custom rom logo. It does nothing else whatsoever after that. I need to take out my battery and restore my backup in order to get my phone working again from a bootloop. i tried putting the rom in both my external sd card and the phone itself. Also before installing i wiped the dalvik cache etc. Can someone please help, i've tried multiple roms so its obviously my phone. thanks
details:
Running JW4 firmware
android gingerbread 2.3.6
i9000 stucks in logo because your phone is not acessing internel memory...i have also got this problem..i dont have any solution..one thing u can do is that take your phone in download mode for 2 to 3 minutes approximately and then again on your phone ...this will work...But this problem comes again when u shutdown your mobile..another method is to take your i9000 in download mode and connect to computer and then download dbdata.rfs file put in odin in pda and apply ...these two processess will definately work fine to acess your internal memory
Sent from my GT-I9000 using xda app-developers app
Just a few questions regarding how you installed the rom.
1.) What rom, first of all?
2.) After rooting 2.3.6 and trying to flash through recovery, did the phone skip to the kernel screen before continuously bootlooping?
3.) Did you try pulling your battery, then putting it back in, entering recovery and flashing the same rom again?
Sent from my GT-P7510 using Tapatalk HD
Soryuu said:
Just a few questions regarding how you installed the rom.
1.) What rom, first of all?
2.) After rooting 2.3.6 and trying to flash through recovery, did the phone skip to the kernel screen before continuously bootlooping?
3.) Did you try pulling your battery, then putting it back in, entering recovery and flashing the same rom again?
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
1)i tried flashing cyan AOSP and slim bean roms
2)no the phone simply went to the galaxy s i900 screen and kept rebooting
3?yes i have tried that with no success
[email protected] said:
i9000 stucks in logo because your phone is not acessing internel memory...i have also got this problem..i dont have any solution..one thing u can do is that take your phone in download mode for 2 to 3 minutes approximately and then again on your phone ...this will work...But this problem comes again when u shutdown your mobile..another method is to take your i9000 in download mode and connect to computer and then download dbdata.rfs file put in odin in pda and apply ...these two processess will definately work fine to acess your internal memory
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
The problem i have is that the rom doesnt even install. Also if the phone can't access my internal memory then how can it find the rom? thanks
Then simply put your mobile in download mode and install stock rom value pack XJJW1 2.3.6 via odin..your problem will be fixed.
Sent from my GT-I9000 using xda app-developers app
[email protected] said:
Then simply put your mobile in download mode and install stock rom value pack XJJW1 2.3.6 via odin..your problem will be fixed.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
will i still have cwm etc, sorry im a noob at all this stuff. getting used to it

Categories

Resources