Related
Hello ,
Im new here and i tried to flash a file and right now i cant start my phone .
the only thing i can do is get into bootloader , i looked all around videos and threads , tried to unbrick unroot flash a diffrent rom . nothing works . i can't get s-off , my computer cant recognize the phone , no adb commands work,
the only thing i was able to do is to reinstall twrp recovery.
Any ideas please ? i beileve there's an answer online before i go to the store to fix it . please help im new to android (only 3 months)
Thank you .
messsiah said:
Hello ,
Im new here and i tried to flash a file and right now i cant start my phone .
the only thing i can do is get into bootloader , i looked all around videos and threads , tried to unbrick unroot flash a diffrent rom . nothing works . i can't get s-off , my computer cant recognize the phone , no adb commands work,
the only thing i was able to do is to reinstall twrp recovery.
Any ideas please ? i beileve there's an answer online before i go to the store to fix it . please help im new to android (only 3 months)
Thank you .
Click to expand...
Click to collapse
You may install the HTC Drivers... and ADB works only on system or recovery... otherwise you have to use fastboot commands. So I'd recommand flashing a Stock ROM from TWRP, you can get a stock rom from here: http://forum.xda-developers.com/showthread.php?t=2224752 (thanks Mike1986 for providing such awesome ROMs)... then you should have a working phone again. At least: If you can enter the bootloader EVERYTHING is fine and you didn't f*** up your HTC One.
Hit the Thanksbutton if it helped or ask me for further clarification
LibertyMarine said:
You may install the HTC Drivers... and ADB works only on system or recovery... otherwise you have to use fastboot commands. So I'd recommand flashing a Stock ROM from TWRP, you can get a stock rom from here: http://forum.xda-developers.com/showthread.php?t=2224752 (thanks Mike1986 for providing such awesome ROMs)... then you should have a working phone again. At least: If you can enter the bootloader EVERYTHING is fine and you didn't f*** up your HTC One.
Hit the Thanksbutton if it helped or ask me for further clarification
Click to expand...
Click to collapse
First of all thank you for the quick response ,and for callming down a bit.
but like i said i am new to this stuff if you can please tell me where can i get the htc drivers because all i can see in the htc site is the htc sync manager ..... and second when i tried to use adb it says that there is not response from my device , like it cannot recognize it. i downloaded the files in the link you posted here . please if you can tell me with more details what to do or if you can direct me to another post with step by step instractions i will really appriciate it .
messsiah said:
First of all thank you for the quick response ,and for callming down a bit.
but like i said i am new to this stuff if you can please tell me where can i get the htc drivers because all i can see in the htc site is the htc sync manager ..... and second when i tried to use adb it says that there is not response from my device , like it cannot recognize it. i downloaded the files in the link you posted here . please if you can tell me with more details what to do or if you can direct me to another post with step by step instractions i will really appriciate it .
Click to expand...
Click to collapse
Okay, first here you have the correct adb and fastboot files, I uploaded them quickliy for you, I think this way they should work properly:
http://uploaded.net/file/ykwya517
Next thing are these HTC Drivers, in this post are a few of them: http://forum.xda-developers.com/showthread.php?t=2089508 and on my computer there are the 4.3.0.001 drivers, so I'd recommand downloading those(Credits go to @mdmower):
http://www.mediafire.com/download/n5y93fdgkvexpwc/HTC+Driver+4.3.0.001.exe
Now shut down your phone and boot in into the bootloader with pressing the power button and the volume down button. Then select fastboot and enter this menu. Now if the drivers are installed correctly there should be written FASTBOOT USB. I think you said you are unlocked... so the following command should run just fine. Open a command prompt and navigate to the folder where adb and fastboot are placed. In this folder you copy your custom recovery(TWRP) and you flash it with this command:
Code:
fastboot flash recovery [recoveryname].img
And DON'T worry about adb in the bootloader! ADB doesn't work with the bootloader. Now you boot into your recovery by chosing Recovery somewhere in your bootloader. If you are in the bootloader you somehow need to push the ROM to your HTC One... This should work with this command...
Code:
adb push "C:\FolderWhereRomIsStored\rom.zip" "/data/media/0/rom.zip"
And if this doesn't copy it correctly simply place your zip on your computer to a folder that is empty and push this folder to your HTC One with:
Code:
adb push "C:\FolderWhereRomIsStored" "/data/media/0"
Now you are good to go, simply flash the zip form TWRP. I think you know how this works Simply go to install and then chose the zip and flash it.
If you now want to s off... then ask me again. I'll give you an advice
LibertyMarine said:
Okay, first here you have the correct adb and fastboot files, I uploaded them quickliy for you, I think this way they should work properly:
http://uploaded.net/file/ykwya517
Next thing are these HTC Drivers, in this post are a few of them: http://forum.xda-developers.com/showthread.php?t=2089508 and on my computer there are the 4.3.0.001 drivers, so I'd recommand downloading those(Credits go to @mdmower):
http://www.mediafire.com/download/n5y93fdgkvexpwc/HTC+Driver+4.3.0.001.exe
Now shut down your phone and boot in into the bootloader with pressing the power button and the volume down button. Then select fastboot and enter this menu. Now if the drivers are installed correctly there should be written FASTBOOT USB. I think you said you are unlocked... so the following command should run just fine. Open a command prompt and navigate to the folder where adb and fastboot are placed. In this folder you copy your custom recovery(TWRP) and you flash it with this command:
Code:
fastboot flash recovery [recoveryname].img
And DON'T worry about adb in the bootloader! ADB doesn't work with the bootloader. Now you boot into your recovery by chosing Recovery somewhere in your bootloader. If you are in the bootloader you somehow need to push the ROM to your HTC One... This should work with this command...
Code:
adb push "C:\FolderWhereRomIsStored\rom.zip" "/data/media/0/rom.zip"
And if this doesn't copy it correctly simply place your zip on your computer to a folder that is empty and push this folder to your HTC One with:
Code:
adb push "C:\FolderWhereRomIsStored" "/data/media/0"
Now you are good to go, simply flash the zip form TWRP. I think you know how this works Simply go to install and then chose the zip and flash it.
If you now want to s off... then ask me again. I'll give you an advice
Click to expand...
Click to collapse
Thank you very much !!! worked ! saved me ....
messsiah said:
Thank you very much !!! worked ! saved me ....
Click to expand...
Click to collapse
Good to know that it worked As some kind of a hint I'd recommand not to proceed s off at the moment because with this security system disabled, you are able to destroy many more partitions such as the bootloader and this would result with irreparable damage to your device and it would be hardbricked. So my advice is: Keep your hands away from S OFF for a few weeks and use rumrunner s off if you are sure that you can understand adb/fastboot basics. I really don't want to say that you are stupid or a noob, this is truly NOT the case! Everyone needs experience and the only way to get experience is to read through forums, to read statements from people that hardbricked their device and many more thing But you have a working phone right now, that is important :highfive:
THIS GUIDE IS ONLY FOR L90 D410, D405, D405n
First of all, This is not my original work. I am just sharing this GUIDE for easy Bootloader Unlocking and flashing Custom Recovery to L90.
I have tested this method myself and it is working perfectly for me, but it is also possible that it might not work for you for some reasons, so don't panic, just post your problem or whatever error you are facing (please attach screenshot if possible). I or other thread members will try to troubleshoot it. After resolving the problem I'll update this post, so that other members do not face such problem again.
Click to expand...
Click to collapse
PLEASE, USE THIS TUTORIAL AT YOUR OWN RISK, IF SOMETHING WENT WRONG (because of your stupidity) ME OR XDA WILL NOT RESPONSIBLE FOR YOUR LOSS.
Click to expand...
Click to collapse
Root Access required to Unlocking Bootloader and Flashing Recovery. If you are already rooted then go on, if not then down towelroot apk from https://towelroot.com/ and root your phone and install superuser from play store.
If towelroot is not supported to your device, then follow my EASY ROOTING GUIDE below :-
[GUIDE] [NEW] Root All L90 Varients with Latest updates [EASY]
Click to expand...
Click to collapse
DEVICES FLASHED WITH THIS GUIDE AND TESTED OK: LG L90 (D410)
Follow this guide step by step :-
1. Download and extract L90_D4##_v10x_aboot.zip (# = your device model, x = version of stock firmware) and any custom recovery zip you want to flash from the attachments below this post to external sd card (aboot.bin should be on external sd (/storage/external_SD/aboot.bin) , not in any other folder.
2. Download and install terminal from play store and run it.
3. Now type following commands in terminal :-
su
dd if=/storage/external_SD/aboot.bin of=/dev/block/platform/msm_sdcc.1/by-name/aboot
Click to expand...
Click to collapse
(Grant superuse permission to terminal after typing "SU" command)
4. Exit terminal, download and install Flashify from play store. Run it and grant root access.
5. Tap on Recovery image > chose a file > select recovery.img file
6. Tap on Yup!
That's it you are done
HOW TO BOOT INTO RECOVERY PRESSING VOLUME AND POWER KEY
You can reboot to recovery via flashify app or following key combination: -
Power of your phone press both Volume Down + Power Button same time, As soon as the LG logo appears release both buttons and immediately press and hold same buttons (Volume Down+Power) again. Now Factory data reset screen will appear saying "Erase all user data & restore default settings?". Use volume down key to select "Yes" and press power button to confirm and now you should be in recovery. (Caution: Don't try this while stock recovery installed or it will erase all your data)
In case of brick or want to flash stock firmware, please follow this guide :
[Easy][GUIDE][UNROOT][RELOCK BOOTLOADER]Flash Stock KDZ Offline LG L90 [All Variants]
Here is also another method to unlock bootloder using ADB on PC by @SubliemeSiem
Guide to unlocking the bootloader on the L90 using ADB
I used evoname's autopatcher, does this aboot work for all variants from v10a to v10d? I thought they all had their separate aboots.
.
anyways the aboot patch works, tested on my d410 v10b
is "dd if=/storage/external_SD/aboot.binde" a typo?
I advice that users first enable fastboot and make backup before doing this.
Does this work on D405 v10b?
Only for D410
Sent from my LG-D410 using XDA Premium 4 mobile app
another typo :
"of=/v/block/platform/msm_sdcc.1/by-name/aboot"
the /v/ is supposed to be /dev/ right?
It was typing error crosswire, thanks for correcting me
Sent from my LG-D410 using XDA Premium 4 mobile app
thanks for twrp ty ty ty
Just press that thanks button instead of posting
Please help!!!!
Hi guys,
I've bricked my D415 by flashing the aboot.bin for the D410.
Now my device doesn't turn on, even when I connect the charger. However when I connect the charger cable with the battery out, the phone turnson and shows a signal to put battery back.
Is there any way to solve this issue? Maybe by reflashing the aboot.bin (I backed it up before).........
Help plz...
IPRJ25 said:
Hi guys,
I've bricked my D415 by flashing the aboot.bin for the D410.
Now my device doesn't turn on, even when I connect the charger. However when I connect the charger cable with the battery out, the phone turnson and shows a signal to put battery back.
Is there any way to solve this issue? Maybe by reflashing the aboot.bin (I backed it up before).........
Help plz...
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-l90/general/guide-flash-stock-kdz-offline-lg-l90-t2803479
follow my this guide
IPRJ25 said:
Hi guys,
I've bricked my D415 by flashing the aboot.bin for the D410.
Now my device doesn't turn on, even when I connect the charger. However when I connect the charger cable with the battery out, the phone turnson and shows a signal to put battery back.
Is there any way to solve this issue? Maybe by reflashing the aboot.bin (I backed it up before).........
Help plz...
Click to expand...
Click to collapse
If ADB still recognizes your device, then yes, flash back your original aboot image. Otherwise, it's KDZ flash. Did you zero out your laf partition to enable fastboot? If so, put device in fastboot mode and flash aboot backup with
Code:
fastboot flash aboot "path/to/aboot.bin"
shinobisoft said:
If ADB still recognizes your device, then yes, flash back your original aboot image. Otherwise, it's KDZ flash. Did you zero out your laf partition to enable fastboot? If so, put device in fastboot mode and flash aboot backup with
Code:
fastboot flash aboot "path/to/aboot.bin"
Click to expand...
Click to collapse
My device is completely dead...
It doesn't turn on.
No fastboot, no download mode, no adb, no life...
But when I connect the usb without the battery, the phone lights up and shows a missing battery icon. Only in that situation. other things do not work, the phone is "The Walking Dead, Last Season"
I think that the aboot is the bootloader of everything... but the question is "why does the phone show the missing battery icon, and then when I put the battery back it doesn't show anything...? No charging, [nothing].
Worked great on my new d410, thanks. I noticed cwm has no backup to ext sdcard. Its this a phone limitation or its from cwm recovery?, so I'll switch to twrp instead. Cus phone memory is too small for my full cwm backup
Sent from my LG-D410 using Tapatalk
Bricked....?
Hello all, I think I bricked my phone (lgl90 D410) I followed instruction from first post , also this is not the first time I do something like this on a phone.
Everything seamed to be fine during the process, but when I tried to boot in recovery the phone wont start at all, the only sign of "life" is when I pull out the battery and plug in the USB cable it shows maybe a warning that the battery is missing, that is all ((((,.
Can some one help me, can I fix this or I should go with warranty ? Thank you in advance !
BR,
Mike
miketgv said:
Hello all, I think I bricked my phone (lgl90 D410) I followed instruction from first post , also this is not the first time I do something like this on a phone.
Everything seamed to be fine during the process, but when I tried to boot in recovery the phone wont start at all, the only sign of "life" is when I pull out the battery and plug in the USB cable it shows maybe a warning that the battery is missing, that is all ((((,.
Can some one help me, can I fix this or I should go with warranty ? Thank you in advance !
BR,
Mike
Click to expand...
Click to collapse
Follow this guide
http://forum.xda-developers.com/showthread.php?t=2803479
[Easy][GUIDE][UNROOT][RELOCK BOOTLOADER]Flash Stock KDZ Offline LG L90 [All Variants]
i have done it a little different way that OP said. on my INDIAN D410
here is what i have done.
1.i have rooted with towelroot and install "supersu,busybox and quick boot "from playstore
2.enabled developer settings in about phone.
3.go to developer settings and enabled usb debugging
4.connect phone to pc in MTP mode
5.open terminal on my ubuntu(you can use windows with adb installed)
6.given following commands
adb devices
Click to expand...
Click to collapse
(accept the rsa key prompt if appears)
adb shell
su
Click to expand...
Click to collapse
(grand super user request)
dd if=/storage/external_SD/aboot.bin of=/dev/block/platform/msm_sdcc.1/by-name/aboot
reboot
Click to expand...
Click to collapse
(after reboot go to adb shell again with su propmt)
dd if=/storage/external_SD/cwm.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Click to expand...
Click to collapse
(you can use cwm.img or twrp.img from quarx's cm11 thread)
in quick boot >>>click recovery>>grant super user
and you are in recovery.
i think this is a easy way as no one has to type commands on mobile which is cubbersome and liitle uneasy.
here you can copy paste if you want...
k2wl said:
i have done it a little different way that OP said. on my INDIAN D410
here is what i have done.
1.i have rooted with towelroot and install "supersu,busybox and quick boot "from playstore
2.enabled developer settings in about phone.
3.go to developer settings and enabled usb debugging
4.connect phone to pc in MTP mode
5.open terminal on my ubuntu(you can use windows with adb installed)
6.given following commands
(accept the rsa key prompt if appears)
(grand super user request)
(after reboot go to adb shell again with su propmt)
(you can use cwm.img or twrp.img from quarx's cm11 thread)
in quick boot >>>click recovery>>grant super user
and you are in recovery.
i think this is a easy way as no one has to type commands on mobile which is cubbersome and liitle uneasy.
here you can copy paste if you want...
Click to expand...
Click to collapse
Thanks for suggestion buddy,
I am aware of this method. You are just using a PC for hole process, but what I am thinking is, that not every L90 user can afford a PC (in INDIA) , but can afford Terminal app for free from play store
gdjindal said:
Thanks for suggestion buddy,
I am aware of this method. You are just using a PC for hole process, but what I am thinking is, that not every L90 user can afford a PC (in INDIA) , but can afford Terminal app for free from play store
Click to expand...
Click to collapse
but you can add this as a alternative method in OP .
people can use what ever they want to.....right??
k2wl said:
but you can add this as a alternative method in OP .
people can use what ever they want to.....right??
Click to expand...
Click to collapse
Thanks K2wl,
I'll update my post :good:
Great! Link for this thread added to Frequently Asked Questions - LG Optimus L90
Hello,
I tried to install the new andoird wear 5.1.1 from this guide: http://forum.xda-developers.com/g-watch-r/general/install-android-wear-5-1-1-to-lg-g-t3114528
and after step 4 i close the "fastboot flash system system_gwr_5.1.1.img" before the install is done (i wait an hour and nothing append).
And now i stuck on the LG logo.
I tried to install again by the guide, but i cant use fastboot, it's write "wating for device".
What to do?
Thanks!
Edit: now the watch reach to the Android system but I have problem with the touch screen that not response. And because of that I can reach to the bootloader and the recovery mode...
Try to hardreset the watch. When you start your watch up and see the LG logo wipe fron 11 to 4 accros the screen.
Genna7 said:
Try to hardreset the watch. When you start your watch up and see the LG logo wipe fron 11 to 4 accros the screen.
Click to expand...
Click to collapse
The touch screen doesn't work after I tried to update the Android wear.. So I can't go to the bootloader...
Someone? Please help!
I am willing to pay to the person that will help me find a solution.
Please help!
Have you figured this out yet?
Spyderekz said:
Have you figured this out yet?
Click to expand...
Click to collapse
No. You also have this problem?
There is a lot of people with this problem in this forum...
Someone know a place that specializes in android wear watches? (please send me, no one knows how to solve this problem here )
try the adb command "adb devices" and "fastboot devices"
I don't think the first one would work (because you are in fastboot mode), but the second should tell if the pc "sees" the watch!
I had to manually install the "android adb composite" device driver in the win device manager...
TML1504 said:
try the adb command "adb devices" and "fastboot devices"
I don't think the first one would work (because you are in fastboot mode), but the second should tell if the pc "sees" the watch!
I had to manually install the "android adb composite" device driver in the win device manager...
Click to expand...
Click to collapse
The computer does not recognize the watch at all...
same here
well, same here: no touch screen, device is not recognized (but boots up to welcome screen) => not able to get into bootloader. Guess, I have to activate developer/debugging mode in the Wear-settings to get it recognized. But how, without touch? Any ideas?
So do you think there is hope for unbricking the watch R from that state ? (mine is the same)
Maybe LGFlashtool will work ? maybe TOT firmware file will be available ?
I am having the same issue after trying to install the stock rom, probably a wrong rom. The watch boots onto a lg logo, stays for a minute or so and reboots into a a boot loop. There is no way to access bootloader or fastboot. Swipe to enter bootloader does not work, tried hundred times, it is like the screen were unresponsive. I have no idea what to do, seems it is bricked.
If I keep pressed the physical button then reboots but lg logo again after a long vibration. Drained the battery, put it on the cradle and then boots onto the lg logo.
anyone?
anyone here has found a solution for this issue?
I am also in the same situation. LG logo stuck after installing a new rom, unresponsive screen no mather if connected to the charger or not. Tried with different computers and OSses, the watch is not recognised.
had this problem as wrong I used the wrong kernel, but I managed to make it work again. this is what you have to do is boot it to bootloader mode, then go to recovery mode and use the "apply update from adb" function (sideload in other words) to install the Android 6.0.1 again.
Link to download Android 6.0.1.
To put the watch in bootloader mode, follow the instruction in my youtube video here.
As soon as it is in bootloader mode, your computer should see the watch as an android device now.
In Bootloader mode, go to recovery mode (use the virtual buttons on screen), then go to the "apply update from adb" option.
Now, at this step, you need to open command line on your computer and type "adb sideload <android file>", where the <android file> is the one you download earlier. You can just type "adb sildeload" then leave a space and drag the file to the running Cmd window.
Now just wait for it to complete and restart itself.
Hope this help.
johnnyle7 said:
had this problem as wrong I used the wrong kernel, but I managed to make it work again. this is what you have to do is boot it to bootloader mode, then go to recovery mode and use the "apply update from adb" function (sideload in other words) to install the Android 6.0.1 again.
["h**ps: //android. googleapis.com/packages/ota/lge_bass_bass/7252d535d6a18047daaf3bfd4745f1c86ef7e7f1.signed-bass-ota-2576000.zip"] to download Android 6.0.1.
To put the watch in bootloader mode, follow the instruction in my youtube video ["h**ps: //w*w. youtube.com/watch?v=ZmBY9KM1NE8"].
As soon as it is in bootloader mode, your computer should see the watch as an android device now.
In Bootloader mode, go to recovery mode (use the virtual buttons on screen), then go to the "apply update from adb" option.
Now, at this step, you need to open command line on your computer and type "adb sideload <android file>", where the <android file> is the one you download earlier. You can just type "adb sildeload" then leave a space and drag the file to the running Cmd window.
Now just wait for it to complete and restart itself.
Hope this help.
Click to expand...
Click to collapse
There is no way to put watch into bootloader mode since screen does not respond.
jogo said:
There is no way to put watch into bootloader mode since screen does not respond.
Click to expand...
Click to collapse
did u watch the video in one of the posts above?
johnnyle7 said:
did u watch the video in one of the posts above?
Click to expand...
Click to collapse
I did. The screen does no respond to touch so 11 to 4 does not work either. I hace tried hundred times and even tapping with 2 fingers which I have seen working in any other vídeo around
same over here.
And this happened without tryng to hack anything (for once in my life)
any update?
I tried to reboot and it is stopped at the LG screen as shown in the attach photo. I dont know what to do now, as I think it cant even connect and to the dock (still charging but not recognised at all by the PC). It would be great and very appreciated if anyone knows what I need to do? Otherwise it is an expensive paperweight now.
Thanks in advance.
P/S: This is my 1st post in XDA, so if anything wrong with my post please let me know, I will change. Thanks again.
Update
I managed to make it work again. this is what you have to do is boot it to bootloader mode, then go to recovery mode and use the "apply update from adb" function (sideload in other words) to install the Android 6.0.1 again.
Link to download Android 6.0.1.
To put the watch in bootloader mode, follow the instruction in my youtube video here.
As soon as it is in bootloader mode, your computer should see the watch as an android device now.
In Bootloader mode, go to recovery mode (use the virtual buttons on screen), then go to the "apply update from adb" option.
Now, at this step, you need to open command line on your computer and type "adb sideload <android file>", where the <android file> is the one you download earlier. You can just type "adb sildeload" then leave a space and drag the file to the running Cmd window.
Now just wait for it to complete and restart itself.
Hope this helps.
This may not help, but try pressing the side button in for 20-30 seconds. Shortly after it stops vibrating, it will start rebooting again and then you can stop pressing the button.
JimSmith94 said:
This may not help, but try pressing the side button in for 20-30 seconds. Shortly after it stops vibrating, it will start rebooting again and then you can stop pressing the button.
Click to expand...
Click to collapse
Hi, I think I messed up with the wrong kernel is the reason of this issue, and I have been able to get to the fastboot menu, do you know how revert it back to the factory/out of box condition? Thanks.
I haven't tried this, but it may work for you: http://forum.xda-developers.com/wat...recovery-stock-recovery-image-v1-1-1-t3124452
JimSmith94 said:
I haven't tried this, but it may work for you: http://forum.xda-developers.com/wat...recovery-stock-recovery-image-v1-1-1-t3124452
Click to expand...
Click to collapse
Thanks for ur help. I have manage to make it works again.
johnnyle7 said:
Thanks for ur help. I have manage to make it works again.
Click to expand...
Click to collapse
Please let us know how you did it, in case or when I or others need to do the same.
JimSmith94 said:
Please let us know how you did it, in case or when I or others need to do the same.
Click to expand...
Click to collapse
should I update my post with the solution?
johnnyle7 said:
should I update my post with the solution?
Click to expand...
Click to collapse
Either that or post a new reply. I know we would appreciate it.
johnnyle7 said:
I tried to reboot and it is stopped at the LG screen as shown in the attach photo. I dont know what to do now, as I think it cant even connect and to the dock (still charging but not recognised at all by the PC). It would be great and very appreciated if anyone knows what I need to do? Otherwise it is an expensive paperweight now.
Thanks in advance.
P/S: This is my 1st post in XDA, so if anything wrong with my post please let me know, I will change. Thanks again.
Update
I managed to make it work again. this is what you have to do is boot it to bootloader mode, then go to recovery mode and use the "apply update from adb" function (sideload in other words) to install the Android 6.0.1 again.
to download Android 6.0.1.
To put the watch in bootloader mode, follow the instruction in my youtube video here.
As soon as it is in bootloader mode, your computer should see the watch as an android device now.
In Bootloader mode, go to recovery mode (use the virtual buttons on screen), then go to the "apply update from adb" option.
Now, at this step, you need to open command line on your computer and type "adb sideload <android file>", where the <android file> is the one you download earlier. You can just type "adb sildeload" then leave a space and drag the file to the running Cmd window.
Now just wait for it to complete and restart itself.
Hope this helps.
Click to expand...
Click to collapse
Hi There,
I have the same problem after the update.
I followed your steps but to enter into recovery mode I had to enable USB debugging mode which cannot be done as the watch keeps on rebooting.
Please let me know is there any other way to enable usb debugging mode to enter into recovery?
I get this error on my pc when I enter into recovery " error device '(null)' not found adb"
rayyansyed said:
Hi There,
I have the same problem after the update.
I followed your steps but to enter into recovery mode I had to enable USB debugging mode which cannot be done as the watch keeps on rebooting.
Please let me know is there any other way to enable usb debugging mode to enter into recovery?
I get this error on my pc when I enter into recovery " error device '(null)' not found adb"
Click to expand...
Click to collapse
Can anybody help me out in bringing my watch to life?
Great post. . . .
Driver Issue
I can get into the fastboot menu but my pc cannot recognize it. What is the appropriate method to connecting it. I have tried different cables, google driver, adb driver but the device doesnt even show up.
Hello guys first of all Sorry for my bad english i will try my best, i bought Huawei p9 for cheap used on the market, phone has a brick problem but i have tryed almost everything: I will provide photos in this post and give all details. So phone cant boot up it says your device has been unlocked and can't be trusted so it bootlops if u dont hold volume Up, if you do u enter Huawei eRecovery where u can navigate with + - volume buttons basically u know it, so i enter " Download latest version and recovery " but there i cant select my wifi Nvaigation commands work but u cant select any wifi so u can only shutdown or reboot. So that is the part one, part two: Fastboot mode works Volume - + usb and u are in fastboot Phone is Unlocked and FRP unlock, i have installed JDK ( java ) + platform + i have installed ADB&fastboot drivers, problem is even with the drivers my device is recognised HI3650 then i have to manualy go in device menager and change it to Android ADB interface, So now im in powershell tyring some commands and some work some no i dont know why, I cant factory reset i cant Wipe ( or erase anything ) im getting adb failed command not allowed, But i can Fastboot flash recovery ( any img ) but noting happens when you flash it even the twrp. So now we are in part 3: Ok so i have found a way to force update device with SD card + and - hold and power button but my phone stucks and Huawei logo and cant do anything.
Down are the pictures of everything any help or idea thanks a lot.
Have you tried to make it work with old firmware? Rllback or anything? If yes and it doesnt work then
Dc phoenix is your friend. 15 euros it will cost you