All,
I was wondering if the built in WM6 Voip client can be activated or be put in if it does not yet exist in the WM6 builds.....
Currently I use Fring for my Voip calls, but I would really like to use the built in client for better native support.
Other WM Voip clients are also welcome....
Cheers,
HJ
Had the same problem i thought that the built-in VoIP client ships with WM6 but it didn't find it on my TyTN II, you can download it from here
ftp://xda:[email protected]/WM6VoIP.CAB
you can find the SipCofigTool very nice utility to config VoIP
http://forum.xda-developers.com/showthread.php?t=303493
mrabie said:
Had the same problem i thought that the built-in VoIP client ships with WM6 but it didn't find it on my TyTN II, you can download it from here
ftp://xda:[email protected]/WM6VoIP.CAB
you can find the SipCofigTool very nice utility to config VoIP
http://forum.xda-developers.com/showthread.php?t=303493
Click to expand...
Click to collapse
Hi Mrabie,
Are you still using VOIP? Please confirm if it used the standard dial pad and if it also uses the front speaker?
Cheers!
There's nothing for the Kaiser that uses the front speaker yet.
Do we know what this is? I assume you mean Voice Over IP (WM6 Built in) currently uses the loud speaker.
One would assume the normal phone speaker could be used (since my old Hermes could).
Hi Guys
I am using my company's VoIP service though my TyTn II. Everything is great! And the voice is came out from the ear speaker.
I installed the SIP Config Tool v. 2.0.1 and WM6VoIP.cab
Thank you
lingalan said:
Hi Guys
I am using my company's VoIP service though my TyTn II. Everything is great! And the voice is came out from the ear speaker.
I installed the SIP Config Tool v. 2.0.1 and WM6VoIP.cab
Thank you
Click to expand...
Click to collapse
Same here, works excellent!
has anyone managed to get the native voip client to work on the kaiser?
I can receive a call but not make one.
when trying to make a call ; I get the error "Network service is not available. Try again later."
sometimes it has worked....
Was working perfectly fine on my hermes (imate jasjam)
lingalan said:
Hi Guys
I am using my company's VoIP service though my TyTn II. Everything is great! And the voice is came out from the ear speaker.
I installed the SIP Config Tool v. 2.0.1 and WM6VoIP.cab
Thank you
Click to expand...
Click to collapse
Great!
I have loaded the 2 cabs and have made some minor progress.
If i reboot the Tytn II is says connected for a moment then it goes to 'searching'. This is over the home wifi network.
When i first loaded the cabs and tried to initiate a call, it did show my voip provider in the dial pad, but now i cant replicate that to test it actually works.
What should i do?
Cheers
Edit: it now says 'available' om the today screen, but i cant get it to dial out using the voip connection. Note that i have not set up dial plans yet. but i think i have made good progress so far!
GLO said:
it now says 'available' om the today screen, but i cant get it to dial out using the voip connection. Note that i have not set up dial plans yet. but i think i have made good progress so far!
Click to expand...
Click to collapse
tap on the name , it needs to show as "selected".
let us know if it works for you.
I can only receive calls.
interestingly, nothing ever arrive on the voip server when i try to make a call; i run my own voip server (asterisk) , and no packet ever make it to the server from the windows mobile device...
warning, numbers must be numeric only, no + or # etc...
Do you mean to select it from the 'Today screen'
If that is what you mean, then when i click on it it takes me to the phone settings tab for internet calling.
Mind you, in that tab it states:
Internet Calling
To set the calling network for your next call, select BBPglobal (my Voip account) on the Today screen.
options: whenever available
Only if cellular is not available
Never
I have it set to whenever available and have also enabled GRS/GSM calls as per SIP config 2.01.
Whilst it now always shows that it is available, i dont see how else i can select it.
if you move the cursor in the today screen to go on the voip plugin, press OK (the button, not using the touch screen) you can change the status to "selected"
Forgot to add: your SIP server must support g711 (ulaw or alaw) codec... none of the low-bandwidth codec work
jyavenard said:
if you move the cursor in the today screen to go on the voip plugin, press OK (the button, not using the touch screen) you can change the status to "selected"
Forgot to add: your SIP server must support g711 (ulaw or alaw) codec... none of the low-bandwidth codec work
Click to expand...
Click to collapse
I move the today screen curser to highlight the voip plugin, but nothing happens when i hit OK or press the big silver button in the middle.
Regarding the SIP server sip2.BBPglobal.com does support g711. Well i was thinking that the phone simply makes a connection to the wireless router (Asus WL500gP running DD-WRT v23sp2) and that would be it. I could be wrong but i think this way simply because i replicated the SIP settings from my ATA (Linksys SPA2102).
Plus i would imaging that when using the VOIP over 3G that it connects with the same settings from the SipConfigTool1.02
Have i missed the boat somehow?
can you tell us which version of WM6VOIP.cab you are using - as in my version the sound comes out of the loudspeaker instead of the earspeaker?
any suggestions?
Would be also interresting for me.
I've tested 3 Types of VOIP software.
- Fring => Comes out of the loudspeaker
- Pocket Talk => Comes out of the loudspeaker
- Prop. WM6 => Could not connect.
Kind Regards
Seppl
I can use Fring/X-lite but the sound comes through the speaker. The WM6 native client can logon but not make any calls (same message as the poster above). I think I can receive calls though (but I have not tried).
mrabie said:
Had the same problem i thought that the built-in VoIP client ships with WM6 but it didn't find it on my TyTN II, you can download it from here
ftp://xda:[email protected]/WM6VoIP.CAB
you can find the SipCofigTool very nice utility to config VoIP
http://forum.xda-developers.com/showthread.php?t=303493
Click to expand...
Click to collapse
Hi,
the first link is about Hermes?! I tried it, but it creates two today plugin...why?!
Is it possible that on the latest Kaiser native ROM some parts of WM&VoIP.CAP is already installed even if there is no Internet Tab under Pgone Settings?
Second: I had universal befor and a cooked rom, and when I clicked on the today plugin I could select or unselect voip for calling. With this cab instead, if I click on the today plugin, I enter into Start->Settings->Phone->Internet.
Third: I looked at ftp://ftp.xda-developers.com/Kaiser/VoIP/ and there is a SleuthKaiserVoIP.cab...what is it?? Maybe the WM6VoIP.cab versio for Kaiser?
monakh said:
I can use Fring/X-lite but the sound comes through the speaker. The WM6 native client can logon but not make any calls (same message as the poster above). I think I can receive calls though (but I have not tried).
Click to expand...
Click to collapse
I get the same problem using PocketTalk!
Stefano
snyfer said:
can you tell us which version of WM6VOIP.cab you are using - as in my version the sound comes out of the loudspeaker instead of the earspeaker?
any suggestions?
Click to expand...
Click to collapse
How many versions are there?
Codec ???
What codecs are supported by the built in VOIP? Maybe the issue of not able to make a call could be codec related like in any other VOIP softwares.
- TKN
As I just discovered that my providor doesn't support videocalls I would like to try to use the second cam whit Skype or MSN, anybody got this working?
Thanks in advanced
Willem
Hi,
No current windows live mobile client supports any (at least not realtime and integrated cam solution as far as i am ware.
You could however look into microsoft portrait, last version is Portrait_PPC_3.1_Beta.msi. its pretty outdated however and i dont think it will be developed, at least not in its current form, any longer.
We must install a program that follows the commands of the actions when the certain program is openned.Then someone has to install the program on HTC Touch PRO and to plug the TV-out cabela and to follow what commands it does.Then we can see which files have started and to transfer them to HTC Touch Diamond.
i have tried microsoft portrait and it did not work for me. also it was not using 3g camera.
Wilsas said:
As I just discovered that my providor doesn't support videocalls I would like to try to use the second cam whit Skype or MSN, anybody got this working?
Thanks in advanced
Willem
Click to expand...
Click to collapse
because your network is not 3G....
adempozhari said:
because your network is not 3G....
Click to expand...
Click to collapse
My network is 3G and even HSDPA and thats the reason why I don't understand that there is no aplication which lets us use the camera under VOIP, that my providor doesn't I can understand thats just a commercial reason, but for Skype or MSN or whatever eplication it could be a killer app.
Willem
I've read several threads on this but the results still arent clear. Some say it works, but only with mic, some say it breaks GPS, some say it doesnt work on WM6.5.
My question is:
Is there any tool available to connect my Raphael WM6.5 using WIFI to a SIP provider (not skype!), and also use the buildin audio / microphone like a regular phone, without breaking any stuff?
I'm willing to pay for this software!
WM6.5 Raphael
ROM: 5.11.502.2 WWE
Rom date: 10/25/09
Radio: 1.11.25.01
Model No: HTC Touch Pro t7272
ce os 5.2.23081 build: 23081.5.3.0)
CPU: QUALCOMM(R) 7201A 528 mhz
RAM: 288MB
I've used Fring to do just that and it worked fine. There's a setting to use the regular earpeice. If it matters, the last time I installed/used Fring was a few versions of the Energy ROM ago - but it did work fine for me and didn't break anything.
you can use Audio Router application to forward the audio to your ear piece ( not the loud speaker ) or bluetooth hand free if available .
for the SIP application, you can use old SIP dialers like X-PDA, Fring or ..... . there are many sip dialers that u can find if u do the search.
Another program for transferring the audio to the earpiece is Audioswitch and you can use it with mortscript to make the process automatic when ever u run your app.
Search in the forum , there are many threats about this.
Tnx
Thunder
Thanks a lot guys! How does this work with Fring? Because after i install it i need to provide a fring username and password instead of my office sip server address and username / password..
Found the answer, there's some hidden tabs there when u use wm6.5 on raphael.
Its not very stable though Sound quality is bad even when i'm on top of my 108mbit wifi router.
Hi there.
I need some help in finding a reliable client for VOIP supporting any SIP provider and also G.729(a)(b)audio codecs.
A good app is SipDroid but does not have G.729 integrated.
Another alternative is VoIP SIP(Vippie) that have G.729 but the interface is featureless and you never know when your calls are through Sip or not. I tried and after 30 min I get my pay back because is an awful app.
I think the best approach is to buy the G.729 codec and to use it in any Sip application you might have it installed. Unfortunately I cannot not find how can an audio codec like G.729 can be bought under Android.
Is everybody that made already some steps in this direction ?
Thank you for the help.
Hope this will somehow help you
csipsimple has g729, should be better than sipdroid
http://code.google.com/p/csipsimple/downloads/list
Thank you for your useful post ! This is what I am looking for !!!
Awesome !!
ronlkh said:
Hope this will somehow help you
Click to expand...
Click to collapse
What can i use this??
Thanks
Is it possible?
Is it possible to activate the native SIP when you are on 3G?
Search function?
Found (e.g.):
http://forum.xda-developers.com/showthread.php?t=960594&highlight=SIP
http://forum.xda-developers.com/showthread.php?t=879458&highlight=SIP&page=2
.. with customROMs