Hello
I was trying flash my gt-p7300 by P7300OXALQ6-----Open Austria via Odin. But few seconds later i got FAIL. Orginal software didn't start. So I try flash CWM but the same effect Fail. I cant flash orginal recover P73xx_Stock_Recovery.tar always FAIL. The tablet power on i can go to download mode but cant flash enything. I note when i change in tar file from recovery.img.md5 to recovery.img Odin writing files to device but after finish tablet reset to download mode, he dont have recovery.
Sorry for my english. Can somebody help me ?
It is possible to write recovery by ADB ?
Topic to close. I flashed tablet by P7300ZSKH5 firmware with repartition and bootloader from topic http://forum.xda-developers.com/showthread.php?t=1678463&page=2. After that I tried again flash tablet by P7300XXLQ6 and everythings gone fine.
Related
I have been trying to write firmwares from samfirmware.com onto my galaxy s, and when I write them it just flashes the boot logo, and then resets. I figured out that it isn't actually entering recovery to install the package. Is there any way to fix this? Or have I officially bricked it?
Note: I just unrooted, that's when the problems started. (stupid I know) I was running CWM Recovery, and Darky's Rom
does it enter download mode ??
if so flash a full 3 file firmware in odin with pit and repartition
EDIT: you cant flash odin files in recovery.. only in odin using download mode
Did your phone have 3BR to start with?
Yeah it enters download mode, says pass when I flash it etc, just when it reboots it doesn't write the flashed package. Do you know where I can get a 3 part package?
@geesamsungs - what do you mean...? Sorry, only very new to flashing.
Hi,
I tried to install TWRP Recovery via ODIN, but I loaded the .tar.md5 file into BOOTLOADER section instead of PDA.
Phone is stuck on Samsung logo, but I can access ODIN MODE and I can flash files.
How to recover the phone?
Matty90 said:
Hi,
I tried to install TWRP Recovery via ODIN, but I loaded the .tar.md5 file into BOOTLOADER section instead of PDA.
Phone is stuck on Samsung logo, but I can access ODIN MODE and I can flash files.
How to recover the phone?
Click to expand...
Click to collapse
Flash stock JB firmware over it,if you were on JB. Do not flash P firmware over non P phone and vice versa.
Flash stock firmware with Odin.
Powered by CM11 M9 snapshot
hello everyone,
I rooted my galaxy ace S5830 using single one click. after that used the stock recovery to install CWM (i changed the name to update.zip and use it from my SD card). By this i lost my recovery option.
I started the phone and used the CWM.apk installed in my apps to flah the recovery again, at this point after restart by the app, the phone stuck and don't start or enter the recovery.
Ican enter download mode (Only word downloading is diplayed on the screen). Now when i try to download the stock ROM or the CWM using Odin, it take very long time and stop at the same point (download MIBIB file). WHen trying to download the recovery using odin, it stuck in the download .img file.
U tried it with different odin versions, but all stuck.
Any advice?
mohamed_fattoh said:
hello everyone,
I rooted my galaxy ace S5830 using single one click. after that used the stock recovery to install CWM (i changed the name to update.zip and use it from my SD card). By this i lost my recovery option.
I started the phone and used the CWM.apk installed in my apps to flah the recovery again, at this point after restart by the app, the phone stuck and don't start or enter the recovery.
Ican enter download mode (Only word downloading is diplayed on the screen). Now when i try to download the stock ROM or the CWM using Odin, it take very long time and stop at the same point (download MIBIB file). WHen trying to download the recovery using odin, it stuck in the download .img file.
U tried it with different odin versions, but all stuck.
Any advice?
Click to expand...
Click to collapse
Can you boot intp recovery mode? or just into download mode?
Solved
Viper The Ripper said:
Can you boot intp recovery mode? or just into download mode?
Click to expand...
Click to collapse
Hello, thank you for repalu. I can boot on the download mode only. I solved it after correcting the (OPS) file name. I found a post on another site said it must be (Cooper_v1.0.ops). After doing that, i can use Odin normally to download the recovery CWM and stock ROM.
Galaxy s Advance i9070 16gb Stuck at boot logo, not booting to recovery (getting buffer logo), going to download mode.
Things i performed.
1.Service center guys told no hardware issue. Tried Jtag.
2.Tried odin Jellybean Stock (single pda file, tried twice with and without pit file),flash successful still stuck at boot logo and not booting to recovery.
3.Tried Flashing Diffrent Jellybean Bootloader via odin. Dint work.
3.Tried downgrading to Gingerbread through odin(single pda file,tried twice with and without pit file),flash successful still stuck at boot logo and not booting to recovery.
4.After downgrading to GB tried flashing Twrp kernel.tar through odin. Flash successful only counter got raised, problem still exist.
Only thing that's working is download mode, Recovery doesn't work (getting buffer logo) And Phone Doesn't boot not even boot animation , Its stuck at boot logo that says galaxy s advance.
When connected to charger or usb getting that buffer symbol,Doesn't shows battery charging icon.
May be separate pda files that has bootloader,phone,modem&csc will work? Cause i tried single pda file and was unable to find separate files.
Please Help.
Hello,
Go here and download PIT for your device. Go in SamMobile and download a package for your device (I suggest I9070XXLQL baseband) doesn't matter if you already own it, download a new one. Extract .tar.md5 from downloaded package, open Odin and press PDA (AP in Odin versions after 3.07) button choosing extracted .tar.md5 file, press PIT button and choose PIT file extracted from ZIP package of that thread, tick "Repartition" option in Odin and flash
Inviato dal mio GT-I9505
AntaresOne said:
Hello,
Go here and download PIT for your device. Go in SamMobile and download a package for your device (I suggest I9070XXLQL baseband) doesn't matter if you already own it, download a new one. Extract .tar.md5 from downloaded package, open Odin and press PDA (AP in Odin versions after 3.07) button choosing extracted .tar.md5 file, press PIT button and choose PIT file extracted from ZIP package of that thread, tick "Repartition" option in Odin and flash
Inviato dal mio GT-I9505
Click to expand...
Click to collapse
Tried Dint help. :crying:
pp_prathap said:
Tried Dint help. :crying:
Click to expand...
Click to collapse
Does Odin recognise your device? Did it flash the firmware or did the process fail?
Sent from Italy using Tapatalk
Toni5830 said:
Does Odin recognise your device? Did it flash the firmware or did the process fail?
Sent from Italy using Tapatalk
Click to expand...
Click to collapse
Yes NO Download Mode Works And Detects .Flashing also completes successfully. But Doesnt Boot.
i9070 hang on boot
Hey every body....I'm in a situation that I cannot boot in recovery but my phone can still goes into download mode using USB jig.....I had flashed my phone more than 3 times but m still in a boot loop.
Any reply will be appreciated.....
Hi!
I have installed TWRP and CM13 on my S5 mini (G800F), but i got many bugs and restarts, so i decided to go back to Stock ROM, unfortunatelly i cannot do this.
When i open Odin and try to install STOCK Rom from samsungmobile everything is good, till the and, when i got:
Write finished (filed)
<OSM> All threads completed. (succeed 0 / failed 1)
I tried on laptop and deskop using various USB port but everytime i get the same message.
And when i get the battery out and power on i get:
"firmware upgrade enountered an issue. Please select recoery mode in Kies and try again"
I tried to connet it with Kies in recovery odin mode but Kies does not recogenize it.
Then i need my phone so i decided to move back to CM this time i have installed the CM12, after using it, one day and having many restarst i tried one more to move to STOCK ROM. I downloaded the older verios of STOCK ROM then i had before. But i got the same messege.
Then someone tell mi to make full wipe, so using TWRP i done the full wipe, cache, data, system and internal storage/sd.
After wipeing internal storage i get only:
"firmware upgrade enountered an issue. Please select recoery mode in Kies and try again"
and cannot even install recovery via Odin any more, beacouse i get bugs ;/ ;/ ;/
as a result i cannot even use my phone with CM12/13.
1. Do You have any tips or solution of this problem?
2. How can I instal STOCK ROM or even CM?
3. Can I install the CM via Odin?
4. Do You have any other recovery for S5 mini G800F?
He there, sorry to hear you're having troubles with the phone. I experienced a similar problem and found that this worked:
Try and flash your stock firmware, when it fails, take out battery, put it back in and restart into recovery mode (stock recovery). From there, do a factory reset and wipe (not using Team Win Recovery Project, using the stock Recovery).
Now go back to odin and try flashing again.
Hope this helps...it worked for me.
Do this when error occurs after flashing stock firmware!
1. Flash stock firmware
2. Get error message
3. Remove battery and start in Recovery Mode
4. Flash hidden.img that you can extract of the stock file!
Quote from reddit.com:
If you've tried to flash firmware off of Sammobile, and had your heart stop when the flash fails, fear no longer.
To fix the soft brick:
Open the firmware file in winrar and extract the hidden.img. Rename it as hidden.img.tar.
Load the new file into the PDA tab, and flash.
When the phone boots, the displayed image will be touchwiz teal, there will be a little android and GALAXY spelt above it. Don't freak out.
Give it a minute and it should boot.
Hi, jest i did happend after flashing a stock firmware, but fortunatelly now it work.
How do i manage to fix it? I do not know. I just tried to flash it with a stock firmware one more time, and than tried to flash TWRP recovery via Odin. It get a fail. But the phone got power on, and it works till now !!!!
What was the problem? I have read that if you have the other CSC than XEO and want to flash the ROM with XEO CSC on S5 mini this problem occurs on many phone. Espesially on that from UK, so mine was.
thanks!!
Kuba