Database Develop

[Q] ClockWorkMod for GT-P1000

Hello Geeks.
Now I'm a noob in xda.
I want to put cwm into my GT-P1000
Where can i find it ?
Thanks

markie1998 said:
Hello Geeks.
Now I'm a noob in xda.
I want to put cwm into my GT-P1000
Where can i find it ?
Thanks
Click to expand...
Click to collapse
I got it when i rooted my tab.
I think root access is required for cwm btw...

now i rooted by super1rootclick.
and now i can access recovery mode.
that's mean cwn is not require anymore ?

You can always access recovery mode.
The stock 3e recovery.
But you want custom recovery, ClockWorkMod recovery being the only one for tab.
Flashing cf-root kernel will give you cwm.
But staying on froyo is not so good, with some having protected boot loader.
Why not just find overcome rom in dev thread and flash it.
You won't regret.
Sent from my GT-P1000 using XDA

ok i'll find it
now i want to test an AOKP ICS rom.
and i not sure if i flash it without cwm on my tab.
I'm a noob here. sorry everyone.

Read this thread.
http://forum.xda-developers.com/showthread.php?t=1626825
This guy wanted to do the same thing.
Sent from my GT-P1000 using XDA

Thanks a lot for that link priyana! Now got a nice guide with pictures
The overcome guide works like a charm, used it on my GT-P1000. It's now running the AOKP ICS 4.0.4 build #36 nice and smooth.
After completing the full overcome guide you can simply flash the AOKP build with cwm.

Download this file:
http://www.4shared.com/zip/g-uW6vGt/CF-Root-TAB7_XX_OXA_JQ1-v33-CW.html
Also download odin v1.7 (google it). Boot your tab in download mode (turn off tab, then hold power button and volume down button simultaneously)
open odin and select the above mentioned file as pda
connect your tab to your pc
start flashing
you will get a rooted tab with cwm installed
please thank me if you found this useful

gogol1996 said:
Download this file:
http://www.4shared.com/zip/g-uW6vGt/CF-Root-TAB7_XX_OXA_JQ1-v33-CW.html
Also download odin v1.7 (google it). Boot your tab in download mode (turn off tab, then hold power button and volume down button simultaneously)
open odin and select the above mentioned file as pda
connect your tab to your pc
start flashing
you will get a rooted tab with cwm installed
please thank me if you found this useful
Click to expand...
Click to collapse
I tried this as I too was having difficulty booting into Clockwork and now my tab won't boot on at all. Someone please help. I don't know where to go ?

Try this as per my post in the thread.
Post back if you have problem.
Btw, you can still get to download mode?
http://forum.xda-developers.com/showthread.php?t=1791681
Basically you need to try flashing gb stock safe package from overcome using Odin.
Sent from my GT-I9300 using xda app-developers app

Hi Priyana,
Do you recommend I do the following but with gb stock safe ?
1) download overcome 4.0 kernel tar file and keep it in your PC
2) download aokp build 38 and gapps-ics from the link in aokp post. Put both on external SD card.
3) read the guide and jump to the part that guides you to flash overcome kernel.
Make sure Odin can see your tab and everything looks exactly like in the picture.
4) flash the overcome kernel and the tab will reboot. There will be a female robotic voice. Stimpz0r recommend no need to wait for finish. Just force power off the tab.
5) power up to recovery by pressing volume up and power button.
I find it a bit tricky sometimes, maybe the way I hold the button. But you will get there.
6) from cwm recovery, choose to install update from external SD card and browse to aokp zip file and install. Some message about checking bml/mtd and you see the tab reboot.
7) you may get a boot loop, it may not boot into recovery, or it may go direct back to recovery. If it does that it is normal.
First time coming from bml to mtd will do that.
Just flash aokp one more time.
You will notice the cwm is not the overcome one anymore. It looks similar but it is not. You will have to browse to internal SD card instead, because this recovery somehow calls your external SD as internal SD.
8) so flash aokp again, and when completed, flash gapps-ics
9) when completed just reboot and sit back and wait till it is done!

I see you came across my old post.
Yes, that should work. But download stimpz0r AOKP build 40.
The post was back when 38 was latest.
If the AOKP failed to flash, you need to go for entire gb stock safe though.
Go ahead try as per this AOKP install post and let me know if you have difficulty.
Sent from my GT-P1000 using xda app-developers app

Great , I am out of the endless boots I was having and now have Gingerbread installed. Bit behind the times though my tab is functional and bit more snappy then the old Froyo. If you have any ideas on how to install Jellybean or any other roms you recommend for GT-P1000 I would really interested. Thanks again champion you have saved me alot of heartache.

Go for AOKP!
you have the instruction laid out here, nothing stopping you.
And if you are bored you can try cm10.
From now on the steps are the same.
Boot to cwm, wipe data, cache, and dalvik, and flash the rom and the gapps.
Please note gapps for ics is different from gapps for jb.
Btw, this is the many times I see cf-root way fails while overcome method works.
Thanks to team overcome we have such a reliable method to get cwm recovery.
Sent from my GT-P1000 using xda app-developers app

I have the rom and gapps from this link http://www.androidauthority.com/gal...-4-1-1-jelly-bean-cyanogenmod-10-cm10-106995/ but I don't think I have clockwork installed as my recovery looks stock. I'm not too sure on where to go from here asthus where I kind of got stuck last time.

You have the 9 steps I wrote.
From step 3 to 5,
At the end of step 5 you will have cwm.
Which one you didn't get?
The guide? I was referring to Overcome guide.
Jump here for the kernel and the guide:
Here is the kernel (tar format for Odin, zip isn't the one you want I guess)
http://forum.xda-developers.com/showpost.php?p=27801159&postcount=8
and guide here
https://docs.google.com/file/d/0B7k...EyNS00Yzg5LWE0MTktYmYyMjA1MThmYzQz/edit?pli=1
So, open the guide:
3) read the guide and jump to the part that guides you to flash overcome kernel.
Make sure Odin can see your tab and everything looks exactly like in the picture.
4) flash the overcome kernel and the tab will reboot. There will be a female robotic voice. Stimpz0r recommend no need to wait for finish. Just force power off the tab.
5) power up to recovery by pressing volume up and power button.
Sent from my GT-P1000 using xda app-developers app

Thanks I will give that at a go now but reading through the guide I forgot to flash the modem file. Am I able to do this seperately?

Don't worry.
The modem was for non mtd.
Once you flash AOKP and the mtd conversion takes place, all partitions are wiped out.
On second flash the rom is installed and jpz modem is included.
It will be just a file in /radio/modem.bin in MTD rom.
If you need to replace the modem in the future, just unpack a modem package and use root explorer to copy and paste the new modem file to overwrite the one there and reboot.
Sent from my GT-P1000 using xda app-developers app

Fantastic From Froyo To JB !
So let me get this right, If I want to change Rom in the future.
All I need to do now is boot up CWM Recovery then Flash Rom And Gapps and if anything goes wrong Flash GB Stock Safe through Odin in Download mode.
Can I ask which Rom you are using/prefer ?
This JellyBean Rom looks good but is not as responsive as GB also I'm having difficulty rotating in home screen.
Thankyou for all the information you have provided me.

You did see me mention AOKP many times, right? that is my favourite.
AOKP and CM9 are ICS.
CM10 and Paranoidandroid 1.99 are JB.
Btw,
don't forget to flash gapps.
Yes, most rom for ICS/JB here are MTD rom, so just do the wipes and flash from cwm.
Sent from my GT-P1000 using xda app-developers app

how to go from devil recovery back to cwm

I've recently flashed the devil kernel to mess around with the JB roms. I'm wanting to go back to ICS roms while the JB roms mature. I booted into devil recovery, wipe then installed the CWM zip but says "status 0" aborted.
I've tried doing it through ROM manager but gives me errors that way also.
What am I doing wrong??

blackinches said:
I've recently flashed the devil kernel to mess around with the JB roms. I'm wanting to go back to ICS roms while the JB roms mature. I booted into devil recovery, wipe then installed the CWM zip but says "status 0" aborted.
I've tried doing it through ROM manager but gives me errors that way also.
What am I doing wrong??
Click to expand...
Click to collapse
Your mistake
1) Using Rom manager
2)Devil kernel uses both cwm and twrp recovery no need to "flash recovery" anyways.
If you can still get in to recover just flash what ever ICS rom you want. I'd advice full wipe and formating /system.
Sent from my SGH-I897 using Tapatalk 2

Same Problem, but i tried to flash with devil recovery. First, with cm10 it says installation aborted. Second time with cm9 he rebooted after 5 sec. and now it's in a boot loop.
What can I do to flash cm9 or cm10?

Pad10 said:
Same Problem, but i tried to flash with devil recovery. First, with cm10 it says installation aborted. Second time with cm9 he rebooted after 5 sec. and now it's in a boot loop.
What can I do to flash cm9 or cm10?
Click to expand...
Click to collapse
CM10 and devil kernel don't always get along. Something about the partition layout with devil. Anyway when you tried CM9 and it rebooted it just means it succeeded in flashing the kernel that CM9 comes with. Pull and replace the battery and 3 button combo back into recovery which will probably not be devil anymore. I don't think you have to but I typically go through the wipe procedure again and then you should be able to reflash CM9 without trouble.

m1batt1 said:
CM10 and devil kernel don't always get along. Something about the partition layout with devil. Anyway when you tried CM9 and it rebooted it just means it succeeded in flashing the kernel that CM9 comes with. Pull and replace the battery and 3 button combo back into recovery which will probably not be devil anymore. I don't think you have to but I typically go through the wipe procedure again and then you should be able to reflash CM9 without trouble.
Click to expand...
Click to collapse
I just flashed the cm9 and it didn't work, so I flashed cm10 and it worked apart from the google apps. It says Installation aborted. I tried to install it once again but it didn't help out.
What can I do now?

Pad10 said:
I just flashed the cm9 and it didn't work, so I flashed cm10 and it worked apart from the google apps. It says Installation aborted. I tried to install it once again but it didn't help out.
What can I do now?
Click to expand...
Click to collapse
the google apps package you have... is it the one for JellyBean?

m1batt1 said:
the google apps package you have... is it the one for JellyBean?
Click to expand...
Click to collapse
It's called "gaps-jb-20120726". The link is in the description of the cm10 thread.

Any help?

Help
Those ROMS use a different partition layout. You have to flash an older ROM via ODIN and then you'll be able to go back.

PantherZA said:
Those ROMS use a different partition layout. You have to flash an older ROM via ODIN and then you'll be able to go back.
Click to expand...
Click to collapse
Okay and how can I do that?
:laugh:

Any help?

Pad10 said:
Okay and how can I do that?
:laugh:
Click to expand...
Click to collapse
By utilizing the sticky threads that have all the information you need.
Pad10 said:
Any help?
Click to expand...
Click to collapse
http://forum.xda-developers.com/forumdisplay.php?f=746

[Q]

Dear all.. please help! I was originally from the official CM10 nightly, but I found it was too slow. So I decided to revert back to Gingerbread AOSP (Cyanogenmod Future 7.2)
1) I installed as per normal, from CWM recovery, flash ROM, flash GAPPS, wipe data, cache and dalvik. I managed to enter until the ROM setup screen, where I was supposed to click on the Android logo, but everytime I did that, it always showed error with setup wizard..
2) So I went back to ROM installation instructions and saw that I was supposed to format system in CWM recovery. I did exactly that, but afterwards it was downhill.. i could not even go past the bootlogo (the galaxy tab 7 logo)...
3) afterwards I tried using format sdcard from CWM recovery, no change.
4) I tried to flash stock p1000 rom by ODIN, with repartition UNCHECKED --- it looked hopeful, i went past the SGT7 boot logo into the samsung logo.. but it was stuck there..
5) I tried flasing stock p1000 rom by ODIN, this time with repartition CHECKED --- no change...
I would really appreciate it someone could help me how I could recover my phone. When I flashed the stock samsung ROM, i lost CWM recovery also.. now I am on default recovery from Samsung.
Please help! Thanks a lot...

Use overcome method. See my signature.
Download the PDF guide and follow to the letter from page 7 to use Odin to restock.
The flash overcome kernel to get CWM, don't need to flash Overcome ROM itself.
Flash your CM7 instead.

priyana said:
Use overcome method. See my signature.
Download the PDF guide and follow to the letter from page 7 to use Odin to restock.
The flash overcome kernel to get CWM, don't need to flash Overcome ROM itself.
Flash your CM7 instead.
Click to expand...
Click to collapse
Priyana, thanks a lot! I will try your method. Do you think should I try the CM7 beta or cyanogen to 7.2 the future? I wonder why using either one, I could not get pass the Android setup screen.
Thx!
Sent from my GT-N8000 using xda premium

I have never use cm 7 or 7.2 myself.
Can't help much there.
Sent from my GT-P1000 using xda app-developers app

Installation aborted in cwm

I have a probleme : i have gingerbread and i want to update to jelly bean but i can't : the message is (installation aborted). I downloaded rom manager i help with http://theunlockr.com/2012/08/29/how-to-load-a-custom-rom-on-an-android-device/ because i have a bleu recovery . I flash the cwm in rom manager and i have the recovery orange . I can't load all custom rom .What's solution ?

Try ICS first.. Then flash jb..
Sent from my GT-I9000 using xda premium

LohithN said:
Try ICS first.. Then flash jb..
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I try this http://forum.xda-developers.com/showthread.php?t=1852546 but it's don't working
My baseband version is XXJVU

I have flash cm9 it's work ( installation complete) but and in boot i see he enter into recovery i see installation aborted

Search for the newest cwm recovery and flash it, install the JB Rom with factory reset and the hole stuff and then have a look at the wiki maybe theres a zip to go back to stock recovery (Used this way myself but i' m using the s+ so i don't now if theres such a file for the normal s. sorry for that)
Or you can search for how to recover from bootloop to recovery
Anywhere was a thread for this but don't know at the moment, will post a link tomorrow
Twll me if it helped you

markey97 said:
Search for the newest cwm recovery and flash it, install the JB Rom with factory reset and the hole stuff and then have a look at the wiki maybe theres a zip to go back to stock recovery (Used this way myself but i' m using the s+ so i don't now if theres such a file for the normal s. sorry for that)
Or you can search for how to recover from bootloop to recovery
Anywhere was a thread for this but don't know at the moment, will post a link tomorrow
Twll me if it helped you
Click to expand...
Click to collapse
No i try this but it's don't working for me i can't reflash to ics and jb . What's the solution

Hi.
first check your file download is complete
then Install 3 files Stock ROM (GB) then Root it with Semaphore and install Your Rom from Recovery

I use with this site http://pinappu.hubpages.com/hub/Sam...e-update-to-Android-40-aka-Ice-Cream-Sandwich . Thx you all

[PARTIALLY-SOLVED] Galaxy Ace S5830 - Can't boot into cwm recovery

Dear Community, greetings.
I have a problem as wrote in the title: I can't boot into cwm recovery. I am gonna try to summarize the main points that lead me here.
Assumption​
I used to install custom ROMS flawlessy, following always the instruction etc...
Last rom I've installed was CM7.2 Apocalypse, Project Silk and Link2SD
I needed to restore stock rom
I searched with Google and came across the following solutions
I searched on XDA and came across the following solutions
What I have done...​
I flashed using odin 4.38 -> GB 2.3.6 2012 October 2.3.6 S5830XWKTS S5830ITVKT2 downloaded from sammobile.com
I rooted the phone with upd_1.zip (that is attached to this thread)
I tried to install recovery-clockwork-5.0.2.6-galaxyace-fix.zip
...and trying to boot into recovery pushing POWER BT + HOME BT the phone stucks on the screen with "Galaxy GT-S5830" and the top-left corner was green
What I have done #2​
I tried to use S5830XXKA6 but I dind't neither managed to boot properly (wiped data/factory and cache)
Tried to flash CWM directly with Odin using "One Package"
Could you kindly help me out?:fingers-crossed: I am also willing to give you further information as you ask.
Thanks everyone for your time.:good:
F.
---- PARTIAL FIX by myself ----
1. Format the sdcard in linux with GParted (you need to install android-tools-adb, android-tools-fastboot)
2. Flashed stock firmware S5830XWKTS S5830ITVKT2 with ODIN Multidownloader 4.38 (downloadeble from www.sammobile.com under ITALY)
3. Rooted with upd_1.apk and updated with Superuser 3.0 (attached)
4. Installed CWM 6.0.1.4
5. Restore an old backup of mine.
6. Rejoice

But your Phone is still working right ?
I mean you are able to use ur stock firmware ryt ?

Vishrut Chhajer said:
But your Phone is still working right ?
I mean you are able to you ur stock firmware ryt ?
Click to expand...
Click to collapse
First of all, thank you very much for the reply. Then, the answer is yes and no. I flashed several firmwares. Some of them did work, others don't. Right now I managed to use the one I've mentioned before and
S5830XWKT7_S5830ITVKT1_ITV
S5830XWKP6_XWKPN
but trying S5830_XXKA6 it goes in bootloop also wiping data and cache.
Further information:
I noticed a problem with CSC. While booting in standard recovery an error message appeared saying something like "can't open /system/csc/XEU/system", so I've created the whole directory path and put the files that were in /system/csc inside. This issue is fixed. I am going to investigate and let you know if with other firmware I listed above I get the same behaviour.

Re: [TS] Galaxy Ace S5830 - Can't boot into cwm recovery
Use the old cwm recovery 5.0.2.4 instead of 6
It was madde by ketut kumajaya
Sent from my ST25i using xda app-developers app

Re: [TS] Galaxy Ace S5830 - Can't boot into cwm recovery
SpaceCaker said:
Use the old cwm recovery 5.0.2.4 instead of 6
It was madde by ketut kumajaya
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
He flashed with Odin, so his recovery must have been flashed back to stock. :/
@OP, flash a "Full-package" file with Odin and see what happens

Re: [TS] Galaxy Ace S5830 - Can't boot into cwm recovery
You could alwayd manually move recovery.img with dd commands to your partitions
But atleast you should have recovery 3e if you reflashe odin rom
Sent from my ST25i using xda app-developers app

@everyone thanks for joining the discussion!:good:
SpaceCaker said:
Use the old cwm recovery 5.0.2.4 instead of 6
It was madde by ketut kumajaya
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
@SpaceCaker I didn't manage to find it across the web, could you kindly point me a resource, or attach it, please?
Prawesome said:
He flashed with Odin, so his recovery must have been flashed back to stock. :/
@OP, flash a "Full-package" file with Odin and see what happens
Click to expand...
Click to collapse
@Prawesome I tried with several all-in-one package (S5830XWKT7 I yet said, and...):
S5830XWKS2_S5830XENKS1_S5830XWKS2_HOME.tar.md5
I also tried to root with upd_1.zip (and did it successefully) and after to updating the xbin/su to the latest version 3.3.1 flawlessy, too.
But... (keep reading)
SpaceCaker said:
You could alwayd manually move recovery.img with dd commands to your partitions
Click to expand...
Click to collapse
@SpaceCaker I don't know how to do it. Could you explain, please?
SpaceCaker said:
But atleast you should have recovery 3e if you reflashe odin rom
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
@SpaceCaker I have the standard Samsung Recovery 3e, complaying about csc and its location (that I could fixed as I said above).
Right know I've also tried to flash cwm 4.0.0.9 without any success. Always stucked to GT-S-5830-www.samsung.etc... screen
Let me know if you want more infos.
Thanks,
F.

Re: [TS] Galaxy Ace S5830 - Can't boot into cwm recovery
Fandonius said:
@everyone thanks for joining the discussion!:good:
@SpaceCaker I didn't manage to find it across the web, could you kindly point me a resource, or attach it, please?
@Prawesome I tried with several all-in-one package (S5830XWKT7 I yet said, and...):
S5830XWKS2_S5830XENKS1_S5830XWKS2_HOME.tar.md5
I also tried to root with upd_1.zip (and did it successefully) and after to updating the xbin/su to the latest version 3.3.1 flawlessy, too.
But... (keep reading)
@SpaceCaker I don't know how to do it. Could you explain, please?
@SpaceCaker I have the standard Samsung Recovery 3e, complaying about csc and its location (that I could fixed as I said above).
Right know I've also tried to flash cwm 4.0.0.9 without any success. Always stucked to GT-S-5830-www.samsung.etc... screen
Let me know if you want more infos.
Thanks,
F.
Click to expand...
Click to collapse
The 3e recovery also complains about csc on stock rom
Even on froyo
Will upload the cwm5 i used
Sent from my ST25i using xda app-developers app

SpaceCaker said:
The 3e recovery also complains about csc on stock rom
Even on froyo
Will upload the cwm5 i used
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
Thanks, could you please upload the firmware you used, too?

Ok some little news:
I managed to flash CWM 6.0.1.8, tried to restore some of my old nand backup (also having mismatch and tricking it emptying the nandroid.md5) but had problems with linked partition sd-ext.
Obtained this error
make_extf4fs /block/mmcblk0p2
Click to expand...
Click to collapse
So tried to wipe/format, but after it stuck on boot.
Still waiting for the cwm 5.0.2.4. Can someone post it?
Thanks

So, thanks for your help . I managed to solve it by myself.
And here's how:
1. Format the sdcard in linux with GParted (you need to install android-tools-adb, android-tools-fastboot)
2. Flashed stock firmware S5830XWKTS S5830ITVKT2 with ODIN Multidownloader 4.38 (downloadeble from www.sammobile.com under ITALY)
3. Rooted with upd_1.apk (attached)
4. Installed CWM 6.0.1.5
5. Restore an old backup of mine.
6. Rejoice

Fandonius said:
So, thanks for your help . I managed to solve it by myself.
And here's how:
1. Format the sdcard in linux with GParted (you need to install android-tools-adb, android-tools-fastboot)
2. Flashed stock firmware S5830XWKTS S5830ITVKT2 with ODIN Multidownloader 4.38 (downloadeble from www.sammobile.com under ITALY)
3. Rooted with upd_1.apk (attached)
4. Installed CWM 6.0.1.5
5. Restore an old backup of mine.
6. Rejoice
Click to expand...
Click to collapse
6.0.1.5 it's bugged. So I am trying to get back to 5.0.2.6 but still being stucked on the Galaxy Ace Logo.

Fandonius said:
6.0.1.5 it's bugged. So I am trying to get back to 5.0.2.6 but still being stucked on the Galaxy Ace Logo.
Click to expand...
Click to collapse
Get in odin and flash cwm5 odin flashable version u can in dev thread
Sent from my GT-S5830 using xda app-developers app

R: [PARTIALLY-SOLVED] Galaxy Ace S5830 - Can't boot into cwm recovery
SnowPluralism said:
Get in odin and flash cwm5 odin flashable version u can in dev thread
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
Thanks for joining the discussion!
I've tried but got stuck to the boot screen with galaxy ace logo and green corner. Could someone tell me where to look to get more info? I mean log, or test I can do... It's so strange I can only flash 6.0.1.5.

Fandonius said:
Thanks for joining the discussion!
I've tried but got stuck to the boot screen with galaxy ace logo and green corner. Could someone tell me where to look to get more info? I mean log, or test I can do... It's so strange I can only flash 6.0.1.5.
Click to expand...
Click to collapse
Leave cwm 6 ....flash stock rom via download mode and then flash cwm 5!
Sent from my GT-S5830 using xda app-developers app

I tried with no success. Please let me know how to give you more information if you need.
Thanks for your answering.

I got the same problem, I googled and a link lead me to here.
I try to flash PX Recovery, but the result is same, stuck on boot logo.

Fandonius said:
I tried with no success. Please let me know how to give you more information if you need.
Thanks for your answering.
Click to expand...
Click to collapse
If u already flashed cwm with rom manager theres nothing u can do about it!
Sent from my GT-I9300 using XDA Premium HD app

Try flashing this:
CWM 5.0.2.6. FIX
When your system reboot, wait until Android boot again, install TERMINAL EMULATOR's app and type this commands:
Code:
su
reboot recovery
After you've done it, your device'll reboot into recovery mode automatically

Viper The Ripper said:
Try flashing this:
CWM 5.0.2.6. FIX
When your system reboot, wait until Android boot again, install TERMINAL EMULATOR's app and type this commands:
Code:
su
reboot recovery
After you've done it, your device'll reboot into recovery mode automatically
Click to expand...
Click to collapse
Tried and doesn't work. Still stuck on boot logo