[Q] my phone (P970) can`t boot the rom - LG Optimus Black

Hi guys,
I tried to upgrade my Optimus Black from Froyo to Gingerbread, but on Gingerbread the Play store doesn't work and I also tried to upgrade to a higher version. After finishing the upgrade to ICS said my phone "Security error" and rebooted to Recovery mode
I flashed my Optimus back to Froyo. After few minutes with new Froyo system asked me the system to update to a higher version, I allow the update and the phone rebooted.
After the phone rebooted i can`t make anything with him, always what i made finished the upgrade in Recovery mode
I read also article "[DEV] All-in-one flash/root/recovery unbricking script" the upgrade doesn't help me really.
Any ideas to wake my phone back to alive?
Thanks a lot for help guys! :good:
Regards,
Pavol

Not flamming but wrong sub-forum. And your post is very confusing. List what you did and the what you got as result. In this way some one will try to help.

Reading this I would say, flash a patched original gb rom somewhere from the General forum(with tutorial included) and then upgrade it with a rom from the developer forum using CWM.
Sent from my LG-P970 using xda premium

DeegRollerz said:
Reading this I would say, flash a patched original gb rom somewhere from the General forum(with tutorial included) and then upgrade it with a rom from the developer forum using CWM.
Sent from my LG-P970 using xda premium
Click to expand...
Click to collapse
Stick to thread as u will get many usefull informations. I m just adding to above reply dat find noobys post and download patched GB and flash it with SFT. It works 99% rest 1% goto service center.

I tried to do this, but I am in same situation. I can not go forward after upgrade :-/
...you know guys about this error >>> E:unknown volume for path [/sd-ext] ? I tried in Advanced > Wipe Dalvik Cash

t1ck0 said:
I tried to do this, but I am in same situation. I can not go forward after upgrade :-/
...you know guys about this error >>> E:unknown volume for path [/sd-ext] ? I tried in Advanced > Wipe Dalvik Cash
Click to expand...
Click to collapse
It's nothing to worry about. It just means you didn't partition your sd card. I get the same "error" too when I want to wipe my Dalvik cache. Bare in mind that at the point when you get the error you haven't wiped your cache yet. You still have to select the option to actually wipe the Dalvik cache...
Sent from my LG-P970 using xda app-developers app

Hi guys, I tested the patched ROM from nooby, but still this same.
The ClockworkMod Recovery alway after reboot :-/
Any ideas?

Moved to Q&A

Its normal to bot in recovery for the 1st time. Did you check to boot again (just confirming).? Remove your SDcard and flash again.

Had any luck in fixing your phone?
Sent from my LG-P970 using xda app-developers app

Hi guys, i havt`t luck with my phone. After the flashing comes the phone do CWM

[B]Genuine Sloution.[/B]
Try this. Worked flawlessly for me. By the way, the last two links won't work so you would have to download them from elsewhere.
HTML:
http://forum.xda-developers.com/showthread.php?p=37903669
Hope it works for you.

Related

[Q] Problem installing MIUI 2.5.25 using Rom Manager

Hello,
Today I tried to install MIUI 2.5.25 for my N1 using Rom Manager.
After it's installed it automaticly boots into recovery mode, so i pressed "reboot system now" but it booted into recovery again. So I had to restore my backup.
What could be the problem?
Marcel94 said:
Hello,
Today I tried to install MIUI 2.5.25 for my N1 using Rom Manager.
After it's installed it automaticly boots into recovery mode, so i pressed "reboot system now" but it booted into recovery again. So I had to restore my backup.
What could be the problem?
Click to expand...
Click to collapse
did you do a full wipe ? before installing rom maybe that why is causing your problems
Yes, I checked the options Wipe Data and Cache and Wipe Dalvik cache in Rom manager. Or do I need to do this a different way?
Marcel94 said:
Yes, I checked the options Wipe Data and Cache and Wipe Dalvik cache in Rom manager. Or do I need to do this a different way?
Click to expand...
Click to collapse
you have to flash it from recovery and do wipe in recovery find the rom you downloaded in rom manger in sd in download folder i think not sure but save that zip/rom in your pc then do full wipe then try installing rom again
That didn't help, it boots into recovery again. Anything else i could have done wrong or forgot about?
Marcel94 said:
That didn't help, it boots into recovery again. Anything else i could have done wrong or forgot about?
Click to expand...
Click to collapse
umm not that i know of did you ask people on that rom thread ? that will surely help you you did do a full wipe correct ? your using CWM Recovery or Aroma Recovery ? try using aroma if that dont help then use 4ext recovery and if that fails im sorry bro i can't help you anymore
Okay, no I haven't asked yet. Yes I use CWM. Thanks anyway!
Marcel94 said:
Okay, no I haven't asked yet. Yes I use CWM. Thanks anyway!
Click to expand...
Click to collapse
try using other recoveries as i said and if i helped HIT THANKS that why it's here
Whats ur hboot partition...4ext is gr8 use that.
Sent from my Nexus One using XDA
blackrose or non blackrose version?
Sent from my Nexus One using Tapatalk
I don't know anything about hboot, I just rooted my phone and than I downloaded MIUI and installed it. So I also guess non blackrose version.
As urs is a non blackrose partition its stock.so its not hboot prob..why dont ur try it from the beginning..using recovery..wipe all 2x then flash zip
Sent from my Nexus One using XDA
Still the same problem. Also if I boot into recovery I get a warn sign if it boots and than it doesn't starts recovery mode. If I install CWM again (using rom manager) I can boot into recovery without any problems. I had this a few times now. Could that be the reason?
If you shut down the phone, then hold the trackball and power, you should boot into bootloader (hboot).
You should then have an option to boot into recovery.
ROM Manager only allows you to reboot into CWM and no other recoveries, as far as I know.
Sent from my ADR6425LVW using Tapatalk 2
Check out the ROM thread, I guess the latest MIUI needs special disk partition. Also post ROM related issues in the thread for quick and appropriate response.
I read about it already, and i wanted to post it there too. But I need to have posted at least 10 posts to post on the development page. But isn't it strange there is a non blackrose version if that one doesn't work anyway? And do you know anything about the warn sign I told about?
Sent from my Nexus One using XDA
I'm trying to install blackrose now. I downloaded the latest version but when I launch the blackrose.exe it automaticly closes again. What could be the problem?
BTW, does my bootloader need to be unlocked for this?
No. its not compulsion for bootloader to be unlocked. might be due to bad download. try downloading again and turn off ur anti virus program while doing it.
Sent from my Nexus One using Tapatalk
Thanks! Turning off my anti virus did the trick
Glad it worked buddy. the reason behind it is that Blackrose uses some exploit and it makes antivirus program consider it a threat, while it really isnt
Sent from my Nexus One using Tapatalk

[Q] Soft bricked 5570 - boot screen freeze

Hello dear friends!
I have following issue with the phone>
1. Phone had froyo installed on it.
2. i tried to copy a custom rom to sd, and then, i just tried to flash it directly via stock recovery. (completly noobish, i realize now...)
3. apparently by the status from the stock recovery it succeeded. BUUUT actually not...
so>
4. i got stuck into the samsung boot logo...
so>
5. i tried to flash cwm recovery through this steps provided by this tutorial.
http://forum.xda-developers.com/showthread.php?t=1342190
6. I now got a black screen instead of any recovery. tried it also with the froyo version of the recovery (designed apparently specially for froyo devices) and also with the gingerbread one. still no joy....
now, i am really lost and have no further ideas.... please help me at least get this back to stock again (it is the phone from work and i will have a hard time explaining them that i bricked it.... )...
please advise what should i try further??
THANKS!!!!!
PS> pls take into account that i am kind of a noob regarding this device... did a lot of things on my hox, but i do not know to much about this s5570....
download a four package firmware then flash it with Odin
Can u pls give me a link to a download / tutorial?? It's my first encounter with odin, so i am pretty noobish... Pls pls
Sent from my HTC One X using xda app-developers app
http://yagyagaire.blogspot.com/
you will get every required info
dheeraj (dhlalit11) said:
http://yagyagaire.blogspot.com/
you will get every required info
Click to expand...
Click to collapse
ok, now device is in following state>
flashed GB rom on it - working
by downloading official gb rom from
here
flashed cwm recovery - works with the steps from my first post now
flashing a custom rom from a zip on the sd card does not work afterwards!!!!!!! - it soft bricks phone again and i have to redo the 2 steps above.... why???
what am i doing wrong???
you didn't wipe data and cache before and after flashing process, right
now u have cwm recovery just boot into recovery and flash another rom... but before u flash rom make sure u clear cache and data from recovery menu then flash rom.
Guilty as charged!!
Trying it now and updating afterwards!
Sent from my HTC One X using xda app-developers app
if your flashing gingerbread over froyo without wiping cache and data then that's why your getting soft brick.
I flashed jb from odin, so no cache deletion needed...
But yes, for custom rom install delete cache data all except sd before!!
So now cyanogenmod is up and running!!
Sent from my HTC One X using xda app-developers app
glad to hear you got it working
oh great its working now
suggesting you to use a hide tag in your sig
Why? to hide what?
Sent from my HTC One X using xda app-developers app
your sign is a bit big
thats nice from u

[Q] from rooted version 2.2 to rooted version 4.0 or more?

Hi,
I was redirected to this part of the forum. A friend of mine rooted my samsung mobile Galaxy S I9000 with a android 2.2 version. I cannot contact him anymore to help me with the update and I am really a newbie in this rooting world. So, I am coming on this forum to have some advice. I read information on rooting your device, in which everything is explained very well, but could not find information on how to update once a device was rooted (probably I did not search in the right place). What I did so far is:
1) Taking backup of my pics (by manually drag and drop the folder on my pc), SMS and call logs (with sms backup + app), syncronized my contacts with gmail so that I can recover them later on and backup the music folder. I installed backup Titanium to back up my apps on my SD card.
But now, I am stuck with some questions (could you guide me where to find the information?):
1) Which most recent version of Android is supported on the device I have? Which version will work best?
2) Is there important information that I forgot to back up? + I have a problem with the backup Titanium app. It could reach my root in the beginning, but then the Superuser app updated the binary and from then on my titanium app got stuck when getting access to the root. Any idea how to solve this? Install an older version of the bin.file? How to do that exactly? thanks! => I could fix this problem by installing an older version of superuser in CW recovery. If others have problems with this issue, I can provide help from now on
3) Is there a guide with step by step procedure on which files I have to download on my pc and which procedure to follow? Or could you advice me some useful links?
thanks!
1) there is android 4.2.2 available for this amazing device
2) you propably forgot to backup efs folder
3)
- 1) follow this guide to get android 2.3.6 to your device: http://www.darkyrom.com/index.php?threads/odin-darkyrom-10-2-resurrection-gt-i9000.4272/
- 2) follow this guide to get android 4.2.2 (cm 10.1) to your device after: http://wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd
- 3) now you can flash most of the roms you find in i9000 android development forum. i personally use slimrom
copy /efs! backup ur imei n md5 in efs first! copy da whole efs file! or do nandroid backup.
READ N FOLLOW CAREFULLY here
http://forum.xda-developers.com/showthread.php?t=2149455
considering u already done flashing Sammy n CF
prepare for ROM & kernel(optional) hunt! go to dev section and choose which JB u wanted.download it together with cm9.1.0 n copy to root of internal sd.
n make sure to flash cm9.1.0 stable from cyanogenmod website (galaxymtd) first from 2.3.6, first flash will bootloop, go back to recovery with 3 combo button. flash again n dont leave recovery.
after done flashing twice (if flash ended too quick, then flash again). direct flash 4.1/4.2 chosen rom, twice (first flash will come up with error, juz ignore it flash again (bootloop) recovery again n flash again
Sent from my GT-I9000 using xda premium
A bit off topic, but i didnt want to start a new thread for that...
My question is: is there an android 4.0 version with full touchwiz?
I mean the whole tweaks as slide the contact to message/call and so on
I only foubd CM 9 based ROMs which are themed to look like touchwiz and had the launcher...but i miss the sms app interface, smilies, slide to call things
Is there a port from the SGS2?
Greets Vauvenal7
Sent from my SGS i9000
Vauvenal7 said:
A bit off topic, but i didnt want to start a new thread for that...
My question is: is there an android 4.0 version with full touchwiz?
I mean the whole tweaks as slide the contact to message/call and so on
I only foubd CM 9 based ROMs which are themed to look like touchwiz and had the launcher...but i miss the sms app interface, smilies, slide to call things
Is there a port from the SGS2?
Greets Vauvenal7
Sent from my SGS i9000
Click to expand...
Click to collapse
maybe nope, but try mod urself by searching on theme n app section
Sent from my GT-I9000 using xda premium
Thanks guys!! Will have a look at your suggestions! I guess both explanations are more or less equivalent !! Right?
mogwai123 said:
Thanks guys!! Will have a look at your suggestions! I guess both explanations are more or less equivalent !! Right?
Click to expand...
Click to collapse
yap, its da same, but do some reading first
Sent from my GT-I9000 using xda premium
when I copy my efs folder, I see that it is empty. any idea? I should not proceed further? What should I do?
UPDATE: phone still finds my IMEI number when dialing *#06#
if ur imei intact, then leave it, i dont know which ROM ur using but try to see /efs with option show hidden in rooted file explorer
Sent from my GT-I9000 using xda premium
I followed the guide you mentioned here:
http://forum.xda-developers.com/show....php?t=2149455
in which they install that JVU ROM... then they say at the end that you have to unmount SD card (but that option was gray in my case) and wipe the USB storage and then reboot in recovery and do those 4 wipes, what I did, and then he mentioned that you could install your custom ROM, so I put the version of slimrom 4.2.2 on my sd card and launched it for installation.
However, the procedure started, but after a few seconds already my phone rebooted and now it is stuck at the logo of Semaphore...
What did I wrong? And what should I do?
mogwai123 said:
I followed the guide you mentioned here:
http://forum.xda-developers.com/show....php?t=2149455
in which they install that JVU ROM... then they say at the end that you have to unmount SD card (but that option was gray in my case) and wipe the USB storage and then reboot in recovery and do those 4 wipes, what I did, and then he mentioned that you could install your custom ROM, so I put the version of slimrom 4.2.2 on my sd card and launched it for installation.
However, the procedure started, but after a few seconds already my phone rebooted and now it is stuck at the logo of Semaphore...
What did I wrong? And what should I do?
Click to expand...
Click to collapse
Should I shut down my phone and try to put it in download mode again to put the JVU rom on it again via odin? is that the best strategy? Or should I do something else? and if that would work, what is then the best procedure to avoid such situations again?
nope, u did rite, but also wrong, ok, read carefully here....
flashing for upgrade is easy if u follow carefully, when in GB, after flashing CF ROOT, flashing to 4.0 (cm9) first (take da zip from cyanogenmod website) but luckily ur on 2.3.6 JVU (if u follow da link i gave), so it will be safe (safe procedure will be GB-ICS-JB), first flash will bootloop, second flash (sometimes) will occur error n third flash will succeed, which means u hav to flash twice or thrice or maybe 4 times! if its bootloop, go to recovery back by 3 button combo (its da matter of when u release da combo button, release it rite after u see da first white bootsplash)
bootloop cause by changing da partition tp ext4, its common
but if u already try to reach recovery n failed most times, u need to flash back firmware n cf root.
Sent from my GT-I9000 using xda premium
compacity said:
nope, u did rite, but also wrong, ok, read carefully here....
flashing for upgrade is easy if u follow carefully, when in GB, after flashing CF ROOT, flashing to 4.0 (cm9) first (take da zip from cyanogenmod website) but luckily ur on 2.3.6 JVU (if u follow da link i gave), so it will be safe (safe procedure will be GB-ICS-JB), first flash will bootloop, second flash (sometimes) will occur error n third flash will succeed, which means u hav to flash twice or thrice or maybe 4 times! if its bootloop, go to recovery back by 3 button combo (its da matter of when u release da combo button, release it rite after u see da first white bootsplash)
bootloop cause by changing da partition tp ext4, its common
but if u already try to reach recovery n failed most times, u need to flash back firmware n cf root.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Ok, thanks!!!! this worked!!! I justed flashed cm9 and it works. So, if I understand well now, I can just return in recovery mode and install from zip from sd card to cm10 and then for instance to slimrom? Or between 'two' flashes, I need to follow the last part of the procedure in the link you gave me? So:
"Now, what I do now is go into :
Settings > SD Card and Storage > Unmount SD and Wipe that and then at the bottom Wipe Format USB Storage
Enable USB Debugging > Plug in Phone
Window should open up showing your phone Directory..
Copy over your ROM that you want
Shut Down Phone
Reboot into Recovery (Vol UP - Menu - Power)
Wipe the 4 things (probably know these... you should do)
Data / Factory Reset
Cache Partition
Go to Advanced > OK
Dalvik Cache
Battery Stats
Go Back > OK
To move Up or Down > Use the Left Side Volume Rocker Switches with Menu to OK Action
Install your Custom ROM from Zip Card that you want..."
OR: can I just go to recovery mode and do install from zip without doing that procedure with "wipe" etc?
Just to know, as I am just a newbie in these things!!! But I want to thank you once again for the clear explanations and the good help!!!!
juz flash mate , its easy, da important thing is to follow da sequence, thats all, juz flash, wiping cache or resetting juz for changing ROM. not upgrading
juz FLASH it
GB-ICS (twice)(do not leave recovery after second flash)-(any custom JB ROM u choose(twice or thrice))(make sure u already put da zip file in internalsd). dont need any wiping.
but FLASH AT UR OWN RISK,remember that.
n yes, recovery need hardbutton except TWRP recovery.
Sent from my GT-I9000 using xda premium
---------- Post added at 10:57 AM ---------- Previous post was at 10:34 AM ----------
here info
updating ROM from firmware (juz flash)
changing from custom ROM to any custom ROM (wipe ALL cache, factory reset, wipe dalvik n mount system n format system)
changing/flashing inbetween custom kernel (wipe cache n wipe dalvik cache)
fone slowing down (reboot or fix permission)
changing/flashing/applying tweak (wipe dalvik cache)
Sent from my GT-I9000 using xda premium
compacity said:
juz flash mate , its easy, da important thing is to follow da sequence, thats all, juz flash, wiping cache or resetting juz for changing ROM. not upgrading
juz FLASH it
GB-ICS (twice)(do not leave recovery after second flash)-(any custom JB ROM u choose(twice or thrice))(make sure u already put da zip file in internalsd). dont need any wiping.
but FLASH AT UR OWN RISK,remember that.
n yes, recovery need hardbutton except TWRP recovery.
Sent from my GT-I9000 using xda premium
---------- Post added at 10:57 AM ---------- Previous post was at 10:34 AM ----------
here info
updating ROM from firmware (juz flash)
changing from custom ROM to any custom ROM (wipe ALL cache, factory reset, wipe dalvik n mount system n format system)
changing/flashing inbetween custom kernel (wipe cache n wipe dalvik cache)
fone slowing down (reboot or fix permission)
changing/flashing/applying tweak (wipe dalvik cache)
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Thanks!!!! Just one small question. I just flashed CM10 in recovery mode and first flash gave error, second went well. Then while still being in recovery mode I directly flashed slimrom and that went well from the first time. Do you always flash a second time to make sure that things went well or this is ok then?
mogwai123 said:
Thanks!!!! Just one small question. I just flashed CM10 in recovery mode and first flash gave error, second went well. Then while still being in recovery mode I directly flashed slimrom and that went well from the first time. Do you always flash a second time to make sure that things went well or this is ok then?
Click to expand...
Click to collapse
as i already said, flash more than 2 times when upgrading, juz upgrading process. GB-ICS-JB (CM7-CM9-CM10/10.1) is upgrading process.
changing ROM not necessarily need double flashing, but u can do it if ur not satisfy whether da ROM already flashed or not
Sent from my GT-I9000 using xda premium
ok, thanks!!! no, everything is working fine with this slimrom, except for google play that does not seem to open once I install it. It opens and closes directly... but I guess there are persons that had the same problem. will have to check the forum for a solution
mogwai123 said:
ok, thanks!!! no, everything is working fine with this slimrom, except for google play that does not seem to open once I install it. It opens and closes directly... but I guess there are persons that had the same problem. will have to check the forum for a solution
Click to expand...
Click to collapse
Hmmm, is probably because I get this error when starting slimrom: invalid IMEI number...I flashed it a second time, but it gave me the same error...
Which gapps have you flashed? Slimbean needs a special package, you find it under slimroms.net.
Sent from my GT-I9000 using xda app-developers app
wget21 said:
Which gapps have you flashed? Slimbean needs a special package, you find it under slimroms.net.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
I will have a look there for that google play problem.
More problematic is that problem of IMEI. When I flashed from CM 9 to CM10 I did not do that wipe of cache and data as suggested above (the reply came later on), and then I flashed slimrom. That I forgot to wipe between CM9 and CM10, can that be the cause of wrong IMEI now? Is the solution now, to wipe cache and data, to flash again CM 10 and to flash then slimrom again?
Or should I just leave everything like that and do a recovery of my efs folder? If yes, any link for this?

[Q] 10.2 failed. Phone switched off

Hi,
I was using cynogenmmod 10.1 nightly, today i updated it to 10.2 through manual update under about phone option in setting and installed it.
I downloaded gapps for 10.2 and wanted to install it.
Later i tried to get into recovery mode through vol up+power+home but i was not able to get into recovery mode and screen was black.
Then i started my phone and manually updated to 10.1 which i downloaded earlier through about phone-update option and phone updated and after reboot was not starting.
Now my phone is not getting into recovery mode and neither it is starting.
Kindly help.
Can you get into download mode?
Sent from my GT-N7000 using XDA Premium 4 mobile app
M able to get into download mode. I flashed it with N7000DDLSC_N7000ODDLSC_INU.zip
But phone is only showing samsung start screen and not moving ahead.
Kindly help
Flash a three file stock rom.
Thanks. Kindly provide link for the same of stock rom.
Also let me know which is better and stable custom rom which i like to upgrade after flashing with the stock rom.
Dr Ketan's thread has all the older 3 part roms, and we don't do best roms, just try them all and decide for yourself
Sent from my GT-N7000 using XDA Premium 4 mobile app
Get into download mode and flash some kernel via odin, so the cwm is flashed.
Then enter recovery, wipe data, system and flash your rom
Sent from my GT-N7000 using xda app-developers app
I am able to get into recovery mode through vol ip+home+power key
Can i install PhilZ-cwm6-DDLSC-ODD-5.08.5-signed (which is kernel i think)
then ill update in recovery mode with cm-10.1-20130727-NIGHTLY-n7000.
Will the above method will solve my problem?? Kindly reply at earliest.
The method mentioned in my previous is not working.
Help me with a link where i get how to update kernel and plz help me to start my phone.
M getting mad!!!
deep-j4u said:
The method mentioned in my previous is not working.
Help me with a link where i get how to update kernel and plz help me to start my phone.
M getting mad!!!
Click to expand...
Click to collapse
Are You wiping Your data and formatting system before installing new ROM? That's quite important, or it won't boot
Thanks everyone for your support. I have deleted all data and installed 10.2 with new gapps.
Once again thanks!!!
deep-j4u said:
Thanks everyone for your support. I have deleted all data and installed 10.2 with new gapps.
Once again thanks!!!
Click to expand...
Click to collapse
Yep, always wipe Your data changing to other structure of ROM. And sometimes also system...
Thanks for the help buddy.
Also when we change version we should wipe cache but in same version when we update through about phone option that time cache wiping is necessary??
Where I can get themes for 10.2 CyanogenMod?
try search for HoloGlass Theme beta.. quite interesting for me..
Sent from my GT-N7000 using xda premium

[Solved] Recoveries not really working on CWM

Hi everyone!
I'm still a newbie arround here, so i will have to tell you all the steps i did until i got the problem.
So i did the following: I have stock rom (4.0.4) and BaseBand, i've rooted the phone using NVFlash method (using All-in-One Toolkit by SpyrosK) and i've replaced the Stock ICS BootLoader also using the AIO Toolkit. The phone was working great and all but after some weeks it started getting slow and i though about doing a factory recovery. So I tried the backup normally. Went to the menu then settings> backup and reset> factory data reset. After the reboot the normal LG logo showed and then the following: "Unfortunatly, the process com.android.phone has stopped" and behind this text box it has: "Encryptation unsuccessful
Encryptation was interrupted and can't complete. As a result, the data on your phone is no longer accessible. To resume using your phone, you must perform a factory reset[...]" and it has a reset phone button but i can't acess it because the text window is on top.
After I got this I tough about giving a try to CWM(v6.0.2.5) recovery. So i tried the following: wipe cache partition, wipe cache partition, wipe dalvik cache and fix permissions and tried the reboot but the same problem still persists...
Can anyone help me? This doesn't seem like a brick to me and it was supposed to be a factory reset but isn't correctly working. What can I do to fix this?
Tell me if you have any question or if you need a picture of the screen i get when i boot the phone. Than you very much.
Edit: Already tried to change my recovery image, still have the same problem...Was thinking in installing the stock rom again via CWM. Is it a good ideia? Will it fix?
In CWM there is a factory reset too (something like wipe data/factory reset). That should do the trick (but I'm afraid you'll have to set up from scratch again). Otherwise you'll have to wipe everything (including format /system) and flash the ROM again...
Sent from my LG-P990 using xda app-developers app
oneearleft said:
In CWM there is a factory reset too (something like wipe data/factory reset). That should do the trick (but I'm afraid you'll have to set up from scratch again). Otherwise you'll have to wipe everything (including format /system) and flash the ROM again...
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Tried that wipe data/factory reset too. It did'nt work either. Maybe I'll go for the full wipe and try the stock rom again. Thank you for the help
I am sorry to hear. Why don't you try flashing another ROM, just to test? For example pengus' CM10 equivalent http://forum.xda-developers.com/showthread.php?t=2058231? It is very stable. Remember to update to last Kowalski kernel (by flashing after flash of ROM). May I suggest M1 norh (without ram hack)...
PS You need to be on new bootloader - see instructions in thread. If you have problems with the CM10 camera, you can flash CM10v3 by feav http://forum.xda-developers.com/showthread.php?t=2163473
Sent from my LG-P990 using xda app-developers app
Your partition is corrupt. Please reflash unlocked new Bl.
Thanks
Sent from my LG-P990 using xda app-developers app
Jishnu Sur said:
Your partition is corrupt. Please reflash unlocked new Bl.
Thanks
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Tried that with AIO by SpyrosK . Still didn't work. But thanks for the suggestion!
oneearleft said:
I am sorry to hear. Why don't you try flashing another ROM, just to test? For example pengus' CM10 equivalent http://forum.xda-developers.com/showthread.php?t=2058231? It is very stable. Remember to update to last Kowalski kernel (by flashing after flash of ROM). May I suggest M1 norh (without ram hack)...
PS You need to be on new bootloader - see instructions in thread. If you have problems with the CM10 camera, you can flash CM10v3 by feav http://forum.xda-developers.com/showthread.php?t=2163473
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Because I have no currently back up (coz of neglicence) I'll try a stock rom first. I'll give this a try after the stock rom. Thank you again :good:
Jishnu Sur said:
Your partition is corrupt. Please reflash unlocked new Bl.
Thanks
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Was probably this! When i wrote the reply i tried using the option of replacing the Stock locked to the new one and this did not fixed.
So after i tried the option "Repartition your device with preferred layout and bootloader. Had to get another rom after and got the stock rom again, but i'll give a try to the one oneearleft suggested. Thank you very much. I've learned a lot with this!
Cheerz and keep up the good work!

Categories

Resources