Hi everyone!
I'm still a newbie arround here, so i will have to tell you all the steps i did until i got the problem.
So i did the following: I have stock rom (4.0.4) and BaseBand, i've rooted the phone using NVFlash method (using All-in-One Toolkit by SpyrosK) and i've replaced the Stock ICS BootLoader also using the AIO Toolkit. The phone was working great and all but after some weeks it started getting slow and i though about doing a factory recovery. So I tried the backup normally. Went to the menu then settings> backup and reset> factory data reset. After the reboot the normal LG logo showed and then the following: "Unfortunatly, the process com.android.phone has stopped" and behind this text box it has: "Encryptation unsuccessful
Encryptation was interrupted and can't complete. As a result, the data on your phone is no longer accessible. To resume using your phone, you must perform a factory reset[...]" and it has a reset phone button but i can't acess it because the text window is on top.
After I got this I tough about giving a try to CWM(v6.0.2.5) recovery. So i tried the following: wipe cache partition, wipe cache partition, wipe dalvik cache and fix permissions and tried the reboot but the same problem still persists...
Can anyone help me? This doesn't seem like a brick to me and it was supposed to be a factory reset but isn't correctly working. What can I do to fix this?
Tell me if you have any question or if you need a picture of the screen i get when i boot the phone. Than you very much.
Edit: Already tried to change my recovery image, still have the same problem...Was thinking in installing the stock rom again via CWM. Is it a good ideia? Will it fix?
In CWM there is a factory reset too (something like wipe data/factory reset). That should do the trick (but I'm afraid you'll have to set up from scratch again). Otherwise you'll have to wipe everything (including format /system) and flash the ROM again...
Sent from my LG-P990 using xda app-developers app
oneearleft said:
In CWM there is a factory reset too (something like wipe data/factory reset). That should do the trick (but I'm afraid you'll have to set up from scratch again). Otherwise you'll have to wipe everything (including format /system) and flash the ROM again...
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Tried that wipe data/factory reset too. It did'nt work either. Maybe I'll go for the full wipe and try the stock rom again. Thank you for the help
I am sorry to hear. Why don't you try flashing another ROM, just to test? For example pengus' CM10 equivalent http://forum.xda-developers.com/showthread.php?t=2058231? It is very stable. Remember to update to last Kowalski kernel (by flashing after flash of ROM). May I suggest M1 norh (without ram hack)...
PS You need to be on new bootloader - see instructions in thread. If you have problems with the CM10 camera, you can flash CM10v3 by feav http://forum.xda-developers.com/showthread.php?t=2163473
Sent from my LG-P990 using xda app-developers app
Your partition is corrupt. Please reflash unlocked new Bl.
Thanks
Sent from my LG-P990 using xda app-developers app
Jishnu Sur said:
Your partition is corrupt. Please reflash unlocked new Bl.
Thanks
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Tried that with AIO by SpyrosK . Still didn't work. But thanks for the suggestion!
oneearleft said:
I am sorry to hear. Why don't you try flashing another ROM, just to test? For example pengus' CM10 equivalent http://forum.xda-developers.com/showthread.php?t=2058231? It is very stable. Remember to update to last Kowalski kernel (by flashing after flash of ROM). May I suggest M1 norh (without ram hack)...
PS You need to be on new bootloader - see instructions in thread. If you have problems with the CM10 camera, you can flash CM10v3 by feav http://forum.xda-developers.com/showthread.php?t=2163473
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Because I have no currently back up (coz of neglicence) I'll try a stock rom first. I'll give this a try after the stock rom. Thank you again :good:
Jishnu Sur said:
Your partition is corrupt. Please reflash unlocked new Bl.
Thanks
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Was probably this! When i wrote the reply i tried using the option of replacing the Stock locked to the new one and this did not fixed.
So after i tried the option "Repartition your device with preferred layout and bootloader. Had to get another rom after and got the stock rom again, but i'll give a try to the one oneearleft suggested. Thank you very much. I've learned a lot with this!
Cheerz and keep up the good work!
Related
i did a big mess with my ace
i tried to change \system permissions to only Read.,. Now my phone just stuck at samsung logo :/
i did data reset in recovery mode & also Re-flashed the current through SD Card.. but still not solved please help me out
Edit: try it first. In cwm there's an option called "fix permissions". Try it if it can help or try following.
Well try restoring nandroid backup. Flash rom again and again after full wipes. Format cache, data etc from advance options. Flash another rom at last.
One suggestion, don't do things that you don't know about. Android is working on permissions
Sent from my GT-S5830 using xda app-developers app
abhibnl said:
Edit: try it first. In cwm there's an option called "fix permissions". Try it if it can help or try following.
Well try restoring nandroid backup. Flash rom again and again after full wipes. Format cache, data etc from advance options. Flash another rom at last.
One suggestion, don't do things that you don't know about. Android is working on permissions
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
I tried everythings what ever you suggested..
even fix permissions were getting failed..
But Finally I got my phone back when I flashed it via Odin in download Mode
Thanks For your response
Anytime mate
Sent from my GT-S5830 using xda app-developers app
Hi, so there is this thing:
I have the OB, and the soft buttons/softkeys/hardware buttons on the bottom DON'T work after reflashing to stock. So i re-rooted my device, and the buttons only work with a CM7 rom! the only way to run CM10 now, is by going into AOKP settings and choosing Navbar...
Please help me! is this a hardware or a software problem?? (because the buttons DO work inside cm7 roms? still not 100%, but almost 8 out of 10 times?)
Please take a moment to help me
try a full wipe..den reflash!!
Sent from my LG-P970 using xda app-developers app
I did... Data, cache, format data, format system, format cache, wipe dalvik... everything, but still not working.
BTW, durin Dalvik cache wipe i get an error saying something like: sd/ext not fount, while it IS in there. read somewhere else that this could not be the problem. Or can it be??
SamBG said:
try a full wipe..den reflash!!
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
So you would say:
1. go into CWM, wipe everything
2. go into B2CApp (right?)
3. do an "emergency mode update" (don't know what it is in english, while i'm running dutch B2Capp)
and then it SHOULD work? otherwise it's a hardware issue?
go to CWM wipe everything n reflash a new rom...if den toh problem persists den use the smart flash tool and flash a rooted rom..!!
Sent from my LG-P970 using xda app-developers app
Flash a patched V20S with CWM, start it and make a factory reset FROM HIDDEN MENU.
That should work.
Hi there,
today i tried to install omar-rom. Booted into CWM-Recovery - data wipe/factory reset, wipe cache, wipe dalvik-cache, mount and format /system. After that i installed the zip and rebooted the device.
And here is my problem, it won't boot properly, first time it boots into system, i see the app optimizing tab and immediately first reboot, after that it reboots while the motologo is shown or while the intel logo is shown... this goes over and over.
Two weeks ago i tried omar-rom, there was no problem. In the last two weaks i used original firmware with infini-ROM, infini-ROM still works when i use my untouched backup with these mods - omar rom doesn't. Tried Omar-Rom from 06.19 and 06.20, same result.
Anybody had similar problems, anybody can help?
PS: Sry 4 my bad english, im not a native speaker.
FourOne82 said:
Hi there,
today i tried to install omar-rom. Booted into CWM-Recovery - data wipe/factory reset, wipe cache, wipe dalvik-cache, mount and format /system. After that i installed the zip and rebooted the device.
And here is my problem, it won't boot properly, first time it boots into system, i see the app optimizing tab and immediately first reboot, after that it reboots while the motologo is shown or while the intel logo is shown... this goes over and over.
Two weeks ago i tried omar-rom, there was no problem. In the last two weaks i used original firmware with infini-ROM, infini-ROM still works when i use my untouched backup with these mods - omar rom doesn't. Tried Omar-Rom from 06.19 and 06.20, same result.
Anybody had similar problems, anybody can help?
PS: Sry 4 my bad english, im not a native speaker.
Click to expand...
Click to collapse
Exactly the same! It goes up to intel logo, then blacks out, sometimes i see optimizing tab, and bootloop.
Then we 2 are doing something wrong - I tried to explain exactly what I did, hope someone know what I did wrong.
But i feel like a retard, so many people use Omar-Rom without problems...
FourOne82 said:
Then we 2 are doing something wrong - I tried to explain exactly what I did, hope someone know what I wrong.
But i feel like a retard, so many people use Omar-Rom without problems...
Click to expand...
Click to collapse
I flashed it once with no problems, might be firmware related... I wipe and install but still it doesn't boot. infini works fine btw
anerik said:
I flashed it once with no problems, might be firmware related... I wipe and install but still it doesn't boot. infini works fine btw
Click to expand...
Click to collapse
exactly the same 4 me here
I did the wipe and factory reset .... then install zip and reboot. I did not put no mount and sistem
Sent from my XT890 using xda premium
First time i installed omar-ROM i did the same, now i tryed some times and nothing works...
if you have backup back .............. and installs another via fastboot and erase everything again had the omar to the days slowly began to return to normal by fastboot
Sent from my XT890 using xda premium
zipi23 said:
if you have backup back .............. and installs another via fastboot and erase everything again had the omar to the days slowly began to return to normal by fastboot
Sent from my XT890 using xda premium
Click to expand...
Click to collapse
What? Can you explain again?
well personally I did download the jellybean eu rom and installed via fastboot or rom pillama deves have usb debugging install . by omar the flash recovery to install any rom do cache factory reset and reboot in cmw
Sent from my XT890 using xda premium
So you think that not installing via fastboot is the problem or what? Because i dont think so, it worked like a charm 2 weeks ago...
zipi23 said:
well personally I did download the jellybean eu rom and installed via fastboot or rom pillama deves have usb debugging install . by omar the flash recovery to install any rom do cache factory reset and reboot in cmw
Sent from my XT890 using xda premium
Click to expand...
Click to collapse
So, you say we use fastboot to return to stock fw and then install the rom as normal, or over pillama?
Flashed stock via RSD-lite, tryed to install omar-ROM with CWM after that - same result, bootloop.
Rryed everything possible now, nothing works - am I stupid or is there a problem with the last versions of omar-ROM?
I'll try flashing it over another firmware, it worked on retail br for me once
EDIT: Bootloop again, got up to optimizing apps and then reboot... This is so weird
I flashed "Retail Central Europe", same result as you mate.
FourOne82 said:
I flashed "Retail Central Europe", same result as you mate.
Click to expand...
Click to collapse
Well we must be doing something wrong lol
Indeed, but what?
Make sure you have a custom recovery installed.
Download the *.zip file to your SD.
Boot into your custom recovery of choice.
<Optional when upgrading same ROM> Data wipe will be required if you came from another ROM, even stock EU.
Select install zip from external card, and choose the zip file.
Hit Reboot.
Sent from my XT890 using xda premium
This is exactly what i did the first time, result bootloop - tested with 2 versions of omar-ROM.
FourOne82 said:
This is exactly what i did the first time, result bootloop - tested with 2 versions of omar-ROM.
Click to expand...
Click to collapse
What about install stock eu version with rsd
Then set up everithing
After, install omars rom without wipe
Intel device - Razr i Owner
Hit thanks if i help you or you like my style
Hi guys,
so I was trying to sell my SGS i9000 and I failed. Why? Because I kept getting 'Unfortunately, the process android.process.media has stopped'. I tried everything I could find, clearing particular caches, wiping overall cache and dalvik, factory reset, even reflashed the ROM. Nothing has changed.
I believe it has something to do with the thing that I had accidentaly deleted 'media' folder (actually, cut it and pasted on the desktop, so I copied it back right away). Now the gallery doesn't work, the camera just as well and overall system can't boot every time. (If I press and hold the power button, it starts booting and gets stuck at Slim logo, but when I take the battery out after getting stuck, it boots just fine).
Are there any other solutions?
I'm on Slim Bean official build 7. Not sure which Sema kernel they've used, because I can't download or install anything as well.
format da system before flashing ROM?
flash a fresh new firmware ROM thru Odin?
repartitioning?
so many option u dont apply, try it first.
Sent from my GT-I9000 using xda premium
compacity said:
format da system before flashing ROM?
flash a fresh new firmware ROM thru Odin?
repartitioning?
so many option u dont apply, try it first.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I always format system before flashing, and yes, flashing stock firmware via odin helped, but I got bricked on the first try which scared the crap out of me.
Koostis said:
I always format system before flashing, and yes, flashing stock firmware via odin helped, but I got bricked on the first try which scared the crap out of me.
Click to expand...
Click to collapse
so....is it ok? or not? as i dont understand da result of it.
Sent from my GT-I9000 using xda premium
Yeah, in the end it's alright
Sent from my GT-I9300 using xda app-developers app
Today i had my phone on the charging cable. Reactivated it: everything crashed: trebuchet crashed / sms crashed /whatsapp crashed.
So i took the battery out, tried to restart it. It won't boot, just the Cyanogenmod Circle for 5min+.
Flashed again, same result. Flashed new rom (from davidteri 10.1.0 RC to 10.2 Beta 9.) but now it's stuck at Android is updating / Starting Apps (maybe it's called different, just translating from german).
Any ideas / thougts??
You can't just install cm10.2 over cm10.1 without wiping data. It's a different android version. Try to install cm10.1 again and wipe cache and dalvik cache and fix permissions. If that doesn't work, then I'm sorry but you have to wipe data. If this is the case, do a nandroid-backup. After installing the new rom you can use titanium backup or AppExtractor to extract your apps out of the backup
Greetings, käsebr0t.
Sent from my GT-I9001 using xda app-developers app
käsebr0t said:
You can't just install cm10.2 over cm10.1 without wiping data. It's a different android version. Try to install cm10.1 again and wipe cache and dalvik cache and fix permissions. If that doesn't work, then I'm sorry but you have to wipe data. If this is the case, do a nandroid-backup. After installing the new rom you can use titanium backup or AppExtractor to extract your apps out of the backup
Greetings, käsebr0t.
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
Did that, but the problem occured earlyer...
So i went to and seen in log: "can't format unknown volume /emmc", does that mean brick bug got me and my phone is gone?
Did you do a full wipe? If yes and and it still doesn't work it could be a hardware failure, maybe emmc brick bug
Sent from my GT-I9001 using xda app-developers app
käsebr0t said:
Did you do a full wipe? If yes and and it still doesn't work it could be a hardware failure, maybe emmc brick bug
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
yes i did, will try it a second time...
If it still doesn't work, try to flash back to a stock rom. You can use this guide:
http://forum.xda-developers.com/showthread.php?p=32432437
Sent from my GT-I9001 using xda app-developers app
Nekcbraker said:
Today i had my phone on the charging cable. Reactivated it: everything crashed: trebuchet crashed / sms crashed /whatsapp crashed.
So i took the battery out, tried to restart it. It won't boot, just the Cyanogenmod Circle for 5min+.
Flashed again, same result. Flashed new rom (from davidteri 10.1.0 RC to 10.2 Beta 9.) but now it's stuck at Android is updating / Starting Apps (maybe it's called different, just translating from german).
Any ideas / thougts??
Click to expand...
Click to collapse
-try to wipe data ,dalvik and ceache .
-If not work flash back to stock.
-if the phone not start you maybe must repartion your phone.
i have no experience with the last option.
sorry for bad english
Thanks guys another complete wipe fixed it...
I'm glad to hear that your phone isn't hardbricked
Sent from my GT-I9001 using xda app-developers app