Database Develop

CM Nightly and Google Apps

I know you don't have to wipe to upgrade to a CM nightly, but should I get Google Apps again when prompted to in ClockworkMod?
Sent from my Nexus One using XDA App

If it's the same version that you already have, then there's no point...
If it's a newer version, then go for it...
Latest version can usually be found here:
http://forum.cyanogenmod.com/index.php?/files/category/2-nexus-one/
Sent from my Nexus One using XDA App

Thanks a lot. I need my flashing fix so I'm going to start doing nightlies. I just can't wait for final.
Sent from my Nexus One using XDA App

Flashed it without the GAPPS and upon rebooting they weren't there. I just downloaded them from the link, flashed, and now I'm setting them up. I guess it deletes all of your login info. No biggie, easy stuff.

Sorry, if you're doing a full wipe, then you will need to reflash the gapps. I seldom wipe on the nightlies...
Sent from my Nexus One using XDA App

Oh no I didn't wipe, that's why I thought it was strange. No biggie.
Sent from my Nexus One using XDA App

its a RM shortcoming.. you have to select gapps at that prompt or reboot into recover and manually flash just the ROM.. otherwise your gapps dont survive

Got it!
Sent from my Nexus One using XDA App

Memnoch30 said:
Oh no I didn't wipe, that's why I thought it was strange. No biggie.
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
I was looking at the Cyanogen site, and few people have been commenting on some of the latest nightlies removing the gapps (presumably overwriting the whole system folder).
No biggie, and not a common occurrence...
Sent from my Nexus One using XDA App

need help on cwm
hi, im some what new to this and im having some problems with wcm on mytouch 4g... well had the phone working great and i when to try out a new rom called synergy-rc1 i booted in to recovery then wipe data/ factory reset then wiped cache partition and also wipe Dalvik cache then installed from sc card like before everything was going great then restarted the phone after it completed the install and it booted into the synergy rom screen then it sat there for about 10min and it restarted again and it keaps looping over. restarted in to recovery (cwm ) and tried to do a a factery reset and clear cache and this is what i got and i cant even do a restore.
clockworkmod recovery v5.0.2.0
checking MD5 sums...
Erasing boot before restore...
restoring boot image...
restoring system...
Error while formatting /system!
any help would be appreciated [email protected]

probably a corrupt sd partition.
cwm is known top do that..
try formatting your sd card after saving the content to your pc first.
after format move stuffs back

I would go ask this question in the mytouch 4G section you will probably get better answers.

[Q] How to fix FC's on ParanoidAndroid v1.5?

Q as in subject. Apps such as E-mail, Exchange Services, Maps, Chrome, etc. When 1 FC occurs, the next follow in 30-60 seconds. Anyone experiencing the same?
Thanks.
Sent from my GT-N7000 using xda premium

dilanopro said:
Q as in subject. Apps such as E-mail, Exchange Services, Maps, Chrome, etc. When 1 FC occurs, the next follow in 30-60 seconds. Anyone experiencing the same?
Thanks.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Wipe cache and dalvik cache and re flash the ROM. If it still does the same you will have to wipe your data, cache and dalvik cache and perform a clean install.
But I can't find any new version of PA..
Sent from my Galaxy Note running ParanoidAndroid v0.4 using XDA Premium xD

Thanks for your reply. I already tried the first; wipe cache + dalvik cache. Now I'm indeed going to try the same and reflash the PA ROM + gapps... This is so weird, because before I went to v0.4a (yeah, OP was wrong version sorry) I already performed a clean install (Odin: GB LC1, which is wipe version > Mobile Odin: CF-root LC1 > CWMR: wipe data + jBroid kernel cleaning > CWMR: flash PA v0.4a + gapps).

Still experiencing the FC's ! Now I will have to try to clean install again, later. Starting to worry if somethings wrong with my Note..

Try dpis that are more stable, 160, 180, 200, 213, 220, 240 etc
Sent from my GT-N7000 using Tapatalk 2

Thanks for your suggestion! However, since PA came out I'm only and still on Stock Tablet mode (213 dpi) and I run some apps on Stock Phone mode (320 dpi), other values I've never tried...

Oknow thats eliminated, how did you go to paranoid rom? Might something in your upgrade procedure.
If you dont mind data and setting loss, I think its safe kernel. Put zipfile of paranoid on external card, take the externel card out, then go recovery wipe everything. In mounts format system, data. Thrn put external sdcard back in and install.
That should fix everything.
Just to be carefull backup efs first and check th emmc brickbug app out first, the one that scans your partition for corrupt data its in the fourth section of n7000 xda forum
Sent from my GT-N7000 using Tapatalk 2

In mu 2nd post there's an explanation of my trail to PA v0.4a.
But I don't mind data and setting loss, I'd rather be safe than sorry, so I'll definitely give this a try. Thanks.
Luckily I already got a backup of my EFS partition; and right now I'm going to check what this brickbug app's got for me. I'll report the outcome before taking above steps. Again thanks for your help with this.
EDIT: So, the app showed me that I have the Insane chip and congratulated me after 337s with a passed test. Are these good results?

Did you wipe?

Not yet, tomorrow I'm going to try what baz77 said earlier, to wipe everything via recovery.

Did u use titanium backup to restore if yes dont restore system apps thats what i experienced before just use for user apps
Sent from my GT-N7000 using xda premium

No, I didn't use Titanium Backup to restore any apps...
Meanwhile I have wiped my phone (wipe data/factory reset + format system) and installed PA v0.4a again. Atm all my apps are being restored by my Google account. After this I'm going to configure everything again, hope there aren't FC's anymore! I'll let you guys know.

I think it worked... hope the FC's stay away now! Thanks guys.
Sent from my GT-N7000 using xda premium

Good enjoy it
Sent from my GT-N7000 using xda premium

[Help] Ace stuck on samsung logo, when \system permissions set to READ

i did a big mess with my ace
i tried to change \system permissions to only Read.,. Now my phone just stuck at samsung logo :/
i did data reset in recovery mode & also Re-flashed the current through SD Card.. but still not solved please help me out

Edit: try it first. In cwm there's an option called "fix permissions". Try it if it can help or try following.
Well try restoring nandroid backup. Flash rom again and again after full wipes. Format cache, data etc from advance options. Flash another rom at last.
One suggestion, don't do things that you don't know about. Android is working on permissions
Sent from my GT-S5830 using xda app-developers app

abhibnl said:
Edit: try it first. In cwm there's an option called "fix permissions". Try it if it can help or try following.
Well try restoring nandroid backup. Flash rom again and again after full wipes. Format cache, data etc from advance options. Flash another rom at last.
One suggestion, don't do things that you don't know about. Android is working on permissions
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
I tried everythings what ever you suggested..
even fix permissions were getting failed..
But Finally I got my phone back when I flashed it via Odin in download Mode
Thanks For your response

Anytime mate
Sent from my GT-S5830 using xda app-developers app

[Q] I need a dev for this problem.. it's weird!

Hi, so there is this thing:
I have the OB, and the soft buttons/softkeys/hardware buttons on the bottom DON'T work after reflashing to stock. So i re-rooted my device, and the buttons only work with a CM7 rom! the only way to run CM10 now, is by going into AOKP settings and choosing Navbar...
Please help me! is this a hardware or a software problem?? (because the buttons DO work inside cm7 roms? still not 100%, but almost 8 out of 10 times?)
Please take a moment to help me

try a full wipe..den reflash!!
Sent from my LG-P970 using xda app-developers app

I did... Data, cache, format data, format system, format cache, wipe dalvik... everything, but still not working.
BTW, durin Dalvik cache wipe i get an error saying something like: sd/ext not fount, while it IS in there. read somewhere else that this could not be the problem. Or can it be??

SamBG said:
try a full wipe..den reflash!!
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
So you would say:
1. go into CWM, wipe everything
2. go into B2CApp (right?)
3. do an "emergency mode update" (don't know what it is in english, while i'm running dutch B2Capp)
and then it SHOULD work? otherwise it's a hardware issue?

go to CWM wipe everything n reflash a new rom...if den toh problem persists den use the smart flash tool and flash a rooted rom..!!
Sent from my LG-P970 using xda app-developers app

Flash a patched V20S with CWM, start it and make a factory reset FROM HIDDEN MENU.
That should work.

[Solved] Recoveries not really working on CWM

Hi everyone!
I'm still a newbie arround here, so i will have to tell you all the steps i did until i got the problem.
So i did the following: I have stock rom (4.0.4) and BaseBand, i've rooted the phone using NVFlash method (using All-in-One Toolkit by SpyrosK) and i've replaced the Stock ICS BootLoader also using the AIO Toolkit. The phone was working great and all but after some weeks it started getting slow and i though about doing a factory recovery. So I tried the backup normally. Went to the menu then settings> backup and reset> factory data reset. After the reboot the normal LG logo showed and then the following: "Unfortunatly, the process com.android.phone has stopped" and behind this text box it has: "Encryptation unsuccessful
Encryptation was interrupted and can't complete. As a result, the data on your phone is no longer accessible. To resume using your phone, you must perform a factory reset[...]" and it has a reset phone button but i can't acess it because the text window is on top.
After I got this I tough about giving a try to CWM(v6.0.2.5) recovery. So i tried the following: wipe cache partition, wipe cache partition, wipe dalvik cache and fix permissions and tried the reboot but the same problem still persists...
Can anyone help me? This doesn't seem like a brick to me and it was supposed to be a factory reset but isn't correctly working. What can I do to fix this?
Tell me if you have any question or if you need a picture of the screen i get when i boot the phone. Than you very much.
Edit: Already tried to change my recovery image, still have the same problem...Was thinking in installing the stock rom again via CWM. Is it a good ideia? Will it fix?

In CWM there is a factory reset too (something like wipe data/factory reset). That should do the trick (but I'm afraid you'll have to set up from scratch again). Otherwise you'll have to wipe everything (including format /system) and flash the ROM again...
Sent from my LG-P990 using xda app-developers app

oneearleft said:
In CWM there is a factory reset too (something like wipe data/factory reset). That should do the trick (but I'm afraid you'll have to set up from scratch again). Otherwise you'll have to wipe everything (including format /system) and flash the ROM again...
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Tried that wipe data/factory reset too. It did'nt work either. Maybe I'll go for the full wipe and try the stock rom again. Thank you for the help

I am sorry to hear. Why don't you try flashing another ROM, just to test? For example pengus' CM10 equivalent http://forum.xda-developers.com/showthread.php?t=2058231? It is very stable. Remember to update to last Kowalski kernel (by flashing after flash of ROM). May I suggest M1 norh (without ram hack)...
PS You need to be on new bootloader - see instructions in thread. If you have problems with the CM10 camera, you can flash CM10v3 by feav http://forum.xda-developers.com/showthread.php?t=2163473
Sent from my LG-P990 using xda app-developers app

Your partition is corrupt. Please reflash unlocked new Bl.
Thanks
Sent from my LG-P990 using xda app-developers app

Jishnu Sur said:
Your partition is corrupt. Please reflash unlocked new Bl.
Thanks
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Tried that with AIO by SpyrosK . Still didn't work. But thanks for the suggestion!

oneearleft said:
I am sorry to hear. Why don't you try flashing another ROM, just to test? For example pengus' CM10 equivalent http://forum.xda-developers.com/showthread.php?t=2058231? It is very stable. Remember to update to last Kowalski kernel (by flashing after flash of ROM). May I suggest M1 norh (without ram hack)...
PS You need to be on new bootloader - see instructions in thread. If you have problems with the CM10 camera, you can flash CM10v3 by feav http://forum.xda-developers.com/showthread.php?t=2163473
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Because I have no currently back up (coz of neglicence) I'll try a stock rom first. I'll give this a try after the stock rom. Thank you again :good:

Jishnu Sur said:
Your partition is corrupt. Please reflash unlocked new Bl.
Thanks
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Was probably this! When i wrote the reply i tried using the option of replacing the Stock locked to the new one and this did not fixed.
So after i tried the option "Repartition your device with preferred layout and bootloader. Had to get another rom after and got the stock rom again, but i'll give a try to the one oneearleft suggested. Thank you very much. I've learned a lot with this!
Cheerz and keep up the good work!