[Q] 10.2 failed. Phone switched off - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hi,
I was using cynogenmmod 10.1 nightly, today i updated it to 10.2 through manual update under about phone option in setting and installed it.
I downloaded gapps for 10.2 and wanted to install it.
Later i tried to get into recovery mode through vol up+power+home but i was not able to get into recovery mode and screen was black.
Then i started my phone and manually updated to 10.1 which i downloaded earlier through about phone-update option and phone updated and after reboot was not starting.
Now my phone is not getting into recovery mode and neither it is starting.
Kindly help.

Can you get into download mode?
Sent from my GT-N7000 using XDA Premium 4 mobile app

M able to get into download mode. I flashed it with N7000DDLSC_N7000ODDLSC_INU.zip
But phone is only showing samsung start screen and not moving ahead.
Kindly help

Flash a three file stock rom.

Thanks. Kindly provide link for the same of stock rom.
Also let me know which is better and stable custom rom which i like to upgrade after flashing with the stock rom.

Dr Ketan's thread has all the older 3 part roms, and we don't do best roms, just try them all and decide for yourself
Sent from my GT-N7000 using XDA Premium 4 mobile app

Get into download mode and flash some kernel via odin, so the cwm is flashed.
Then enter recovery, wipe data, system and flash your rom
Sent from my GT-N7000 using xda app-developers app

I am able to get into recovery mode through vol ip+home+power key
Can i install PhilZ-cwm6-DDLSC-ODD-5.08.5-signed (which is kernel i think)
then ill update in recovery mode with cm-10.1-20130727-NIGHTLY-n7000.
Will the above method will solve my problem?? Kindly reply at earliest.

The method mentioned in my previous is not working.
Help me with a link where i get how to update kernel and plz help me to start my phone.
M getting mad!!!

deep-j4u said:
The method mentioned in my previous is not working.
Help me with a link where i get how to update kernel and plz help me to start my phone.
M getting mad!!!
Click to expand...
Click to collapse
Are You wiping Your data and formatting system before installing new ROM? That's quite important, or it won't boot

Thanks everyone for your support. I have deleted all data and installed 10.2 with new gapps.
Once again thanks!!!

deep-j4u said:
Thanks everyone for your support. I have deleted all data and installed 10.2 with new gapps.
Once again thanks!!!
Click to expand...
Click to collapse
Yep, always wipe Your data changing to other structure of ROM. And sometimes also system...

Thanks for the help buddy.
Also when we change version we should wipe cache but in same version when we update through about phone option that time cache wiping is necessary??
Where I can get themes for 10.2 CyanogenMod?

try search for HoloGlass Theme beta.. quite interesting for me..
Sent from my GT-N7000 using xda premium

Related

[Q] Problem installing MIUI 2.5.25 using Rom Manager

Hello,
Today I tried to install MIUI 2.5.25 for my N1 using Rom Manager.
After it's installed it automaticly boots into recovery mode, so i pressed "reboot system now" but it booted into recovery again. So I had to restore my backup.
What could be the problem?
Marcel94 said:
Hello,
Today I tried to install MIUI 2.5.25 for my N1 using Rom Manager.
After it's installed it automaticly boots into recovery mode, so i pressed "reboot system now" but it booted into recovery again. So I had to restore my backup.
What could be the problem?
Click to expand...
Click to collapse
did you do a full wipe ? before installing rom maybe that why is causing your problems
Yes, I checked the options Wipe Data and Cache and Wipe Dalvik cache in Rom manager. Or do I need to do this a different way?
Marcel94 said:
Yes, I checked the options Wipe Data and Cache and Wipe Dalvik cache in Rom manager. Or do I need to do this a different way?
Click to expand...
Click to collapse
you have to flash it from recovery and do wipe in recovery find the rom you downloaded in rom manger in sd in download folder i think not sure but save that zip/rom in your pc then do full wipe then try installing rom again
That didn't help, it boots into recovery again. Anything else i could have done wrong or forgot about?
Marcel94 said:
That didn't help, it boots into recovery again. Anything else i could have done wrong or forgot about?
Click to expand...
Click to collapse
umm not that i know of did you ask people on that rom thread ? that will surely help you you did do a full wipe correct ? your using CWM Recovery or Aroma Recovery ? try using aroma if that dont help then use 4ext recovery and if that fails im sorry bro i can't help you anymore
Okay, no I haven't asked yet. Yes I use CWM. Thanks anyway!
Marcel94 said:
Okay, no I haven't asked yet. Yes I use CWM. Thanks anyway!
Click to expand...
Click to collapse
try using other recoveries as i said and if i helped HIT THANKS that why it's here
Whats ur hboot partition...4ext is gr8 use that.
Sent from my Nexus One using XDA
blackrose or non blackrose version?
Sent from my Nexus One using Tapatalk
I don't know anything about hboot, I just rooted my phone and than I downloaded MIUI and installed it. So I also guess non blackrose version.
As urs is a non blackrose partition its stock.so its not hboot prob..why dont ur try it from the beginning..using recovery..wipe all 2x then flash zip
Sent from my Nexus One using XDA
Still the same problem. Also if I boot into recovery I get a warn sign if it boots and than it doesn't starts recovery mode. If I install CWM again (using rom manager) I can boot into recovery without any problems. I had this a few times now. Could that be the reason?
If you shut down the phone, then hold the trackball and power, you should boot into bootloader (hboot).
You should then have an option to boot into recovery.
ROM Manager only allows you to reboot into CWM and no other recoveries, as far as I know.
Sent from my ADR6425LVW using Tapatalk 2
Check out the ROM thread, I guess the latest MIUI needs special disk partition. Also post ROM related issues in the thread for quick and appropriate response.
I read about it already, and i wanted to post it there too. But I need to have posted at least 10 posts to post on the development page. But isn't it strange there is a non blackrose version if that one doesn't work anyway? And do you know anything about the warn sign I told about?
Sent from my Nexus One using XDA
I'm trying to install blackrose now. I downloaded the latest version but when I launch the blackrose.exe it automaticly closes again. What could be the problem?
BTW, does my bootloader need to be unlocked for this?
No. its not compulsion for bootloader to be unlocked. might be due to bad download. try downloading again and turn off ur anti virus program while doing it.
Sent from my Nexus One using Tapatalk
Thanks! Turning off my anti virus did the trick
Glad it worked buddy. the reason behind it is that Blackrose uses some exploit and it makes antivirus program consider it a threat, while it really isnt
Sent from my Nexus One using Tapatalk

[Q] Soft bricked 5570 - boot screen freeze

Hello dear friends!
I have following issue with the phone>
1. Phone had froyo installed on it.
2. i tried to copy a custom rom to sd, and then, i just tried to flash it directly via stock recovery. (completly noobish, i realize now...)
3. apparently by the status from the stock recovery it succeeded. BUUUT actually not...
so>
4. i got stuck into the samsung boot logo...
so>
5. i tried to flash cwm recovery through this steps provided by this tutorial.
http://forum.xda-developers.com/showthread.php?t=1342190
6. I now got a black screen instead of any recovery. tried it also with the froyo version of the recovery (designed apparently specially for froyo devices) and also with the gingerbread one. still no joy....
now, i am really lost and have no further ideas.... please help me at least get this back to stock again (it is the phone from work and i will have a hard time explaining them that i bricked it.... )...
please advise what should i try further??
THANKS!!!!!
PS> pls take into account that i am kind of a noob regarding this device... did a lot of things on my hox, but i do not know to much about this s5570....
download a four package firmware then flash it with Odin
Can u pls give me a link to a download / tutorial?? It's my first encounter with odin, so i am pretty noobish... Pls pls
Sent from my HTC One X using xda app-developers app
http://yagyagaire.blogspot.com/
you will get every required info
dheeraj (dhlalit11) said:
http://yagyagaire.blogspot.com/
you will get every required info
Click to expand...
Click to collapse
ok, now device is in following state>
flashed GB rom on it - working
by downloading official gb rom from
here
flashed cwm recovery - works with the steps from my first post now
flashing a custom rom from a zip on the sd card does not work afterwards!!!!!!! - it soft bricks phone again and i have to redo the 2 steps above.... why???
what am i doing wrong???
you didn't wipe data and cache before and after flashing process, right
now u have cwm recovery just boot into recovery and flash another rom... but before u flash rom make sure u clear cache and data from recovery menu then flash rom.
Guilty as charged!!
Trying it now and updating afterwards!
Sent from my HTC One X using xda app-developers app
if your flashing gingerbread over froyo without wiping cache and data then that's why your getting soft brick.
I flashed jb from odin, so no cache deletion needed...
But yes, for custom rom install delete cache data all except sd before!!
So now cyanogenmod is up and running!!
Sent from my HTC One X using xda app-developers app
glad to hear you got it working
oh great its working now
suggesting you to use a hide tag in your sig
Why? to hide what?
Sent from my HTC One X using xda app-developers app
your sign is a bit big
thats nice from u

[Q] Can't boot into recovery [CM10.1+Semaphore]

Hey! I got big problem, I can't open the recovery mode after updating my CyanogenMod to the latest RC4 version. After that i flashed Semaphore 2.9.25 kernel, and today I can't open recovery anymore After using Vol Up+Home+Power i see semaphore boot animation freezes for like 20 sec, then CM starts.
So what should I do to get into recovery mode again? I don't know if installing nightly updates will work (recovery doesn't work so how it will be updated), maybe using SGS Kernel Flasher will help?
Please help me solve my problem
Flash a rom with Odin
Go back to stock, try upgrade to CM10.1 again.
Alternatively if you want to learn how to use it you could try using ADB to force recovery. There are guides somewhere in these forums. But going back to stock would probably be easier...
Sent from my GT-P7510 using Tapatalk HD
Today I accidentally dropped my phone, and after back to home... I tried to open recovery CMW again - and it surprisingly worked so I was able to update my kernel :laugh:
But thank you for future solutions, I'd further try to flash only kernel via Odin
AreXe said:
Today I accidentally dropped my phone, and after back to home... I tried to open recovery CMW again - and it surprisingly worked so I was able to update my kernel :laugh:
But thank you for future solutions, I'd further try to flash only kernel via Odin
Click to expand...
Click to collapse
'one drop for solution' huhuhu
so......anyone! who hav same problem!
PREPARE TO DROP UR FONE !
not too hard i guess
Sent from my GT-I9000 using xda app-developers app

[Q] AOSP Alpha Build 6 ROM install failure

This is my first time installing a custom ROM. The phone has been rooted for some time now. I downloaded the AOSP ROM and GAPP 2012011, and flashed both packages. I did not use any third-party software to flash, and it appears the process was successful. When the phone reboots, it hangs at the point where the glowing X (like when my Nexus 7 starts up) appears, and nothing else happens.
Where did I go wrong?
Thanks to anyone who has a suggestion.
Maybe it was a corrupted download or you forgot to wipe
DaddyRick said:
This is my first time installing a custom ROM. The phone has been rooted for some time now. I downloaded the AOSP ROM and GAPP 2012011, and flashed both packages. I did not use any third-party software to flash, and it appears the process was successful. When the phone reboots, it hangs at the point where the glowing X (like when my Nexus 7 starts up) appears, and nothing else happens.
Where did I go wrong?
Thanks to anyone who has a suggestion.
Click to expand...
Click to collapse
Did you forget to wipe your data, cache, and dalvik cache before you flashed. Also are you sure your downloads are not corrupted :cyclops:
Assuming you mean this AOSP right http://forum.xda-developers.com/showthread.php?t=2081011&highlight=aosp
I would just use Supernexus 4.2.2 plus AOIP kernel whitescreen fix or if you want 4.1 use camcorys 4.1.2 build
Also what recovery and build are you using?
Sent from my SGH-T679 using XDA Premium 4 mobile app
mwhitt said:
Also what recovery and build are you using?
Sent from my SGH-T679 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I don't know what you mean by recovery. I used the file AOSP_ancora_tmo_tim1928-4.1.2-Build 6.
And no, I did not wipe the data before I installed the ROM the first time. However I have tried that, and then reinstalled the ROM. Same results.
I feel there is some app or more detailed procedure to installing this ROM, but I don't find specific instructions anyplace.
Thanks for the help I've gotten so far. Any other pointers or suggestions?
DaddyRick said:
I don't know what you mean by recovery. I used the file AOSP_ancora_tmo_tim1928-4.1.2-Build 6.
And no, I did not wipe the data before I installed the ROM the first time. However I have tried that, and then reinstalled the ROM. Same results.
I feel there is some app or more detailed procedure to installing this ROM, but I don't find specific instructions anyplace.
Thanks for the help I've gotten so far. Any other pointers or suggestions?
Click to expand...
Click to collapse
Are you using clockwork mod or twrp to flash the rom
Sent from my SGH-T679 using XDA Premium 4 mobile app

Keeps rebooting to cwm after installing CM

Here is what I did with the phone:
- Flashed JVU via odin
- Flashed CF-Root with CWM via odin
- Wipe EVERYTHING
- Flashed semaphore kernel for 4.3 via CWM
- Rebooted to CWM
- Flashed CM 10.2 stable via CWM
- Flashed semaphore again
- Flashed gapps
And now the phone keeps rebooting to CWM everytime I power it on. It never goes to Android, it always boots to CWM. Any ideas?
Of course, i tried to flash CM / semaphore / gapps again but it keeps doing the same. Flashing only CM does not work either
same problem with my i9000 back year..U have lost you internal memory..it can work if u take you phone into download mode for 5 minutes and then start it it will work..
Sent from my GT-I9300 using xda app-developers app
[email protected] said:
same problem with my i9000 back year..U have lost you internal memory..it can work if u take you phone into download mode for 5 minutes and then start it it will work..
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
What do you mean exactly? ;_;
By the way it seems to work after flashing a samsung stock ROM but it does the same everytime I try to install CM. And I have done it before, I don't understand this ;_; (I decided to start over again because I was having trouble to downgrade from 4.4)
Have you find a solution? I faced the same problem and after reading half of the day on this forum I managed to find a solution to go back to stock and restore the phone functionality. Now I only have to flash CWM/TWRP and start to flash custom ROMs again
Let me know if you still need help.
The correct procedure to come to any ROM is from GB>ICS>JB>KK. So make sure that you are following the correct procedure
Sent from my GT-I9000 using Tapatalk 2
roccatgaming said:
Have you find a solution? I faced the same problem and after reading half of the day on this forum I managed to find a solution to go back to stock and restore the phone functionality. Now I only have to flash CWM/TWRP and start to flash custom ROMs again
Let me know if you still need help.
Click to expand...
Click to collapse
Hi,
I have the same problem, device keeps rebooting.
I did a rooting through Odin 3 and I got the green box saying PASS and now the device keeps rebooting. how can i fix it. Looks like you did the fix on your device.
Can you please tell me step by step how to fix my device.
Your help would be appreciated
Thanks
FLDS

Categories

Resources