I have a Sony VAIO Laptop which has USB 3.0 ports, and when I try to flash it(HTC Pure), it stuck on 0%, and when I pull out the cable, and reset it is like normal with the old ROM again. Is it because of the USB 3.0 ? or is it something else. When I flash it on other computers that has USB 2.0 it works fine. I reinstalled the USB drivers, but they should work also with USB 2.0 - they are compatible. I don't know what else to do.
Please Help!!!
While experimenting with a few ROMs stored in my Samsung I9000, one of the installations didn't complete and a logo loop started....no big deal (I thought) - just hook the data cable to the PC and Download a reliable stock rom e.g. JW4 like I did in the past in similar circumstances - except for an issue which I completely forgotten...the micro usb port has been very unreliable of recently and it's has been a while since I was able to connect to the PC and blaming this "minor" issue to other factors - while in truth the micro usb is busted!! (I know now) - the samsung isn't recognized any more so I can't download any ROM from the PC.
Can I salvage this phone somehow?
I guess the only option is to try and replace the micro usb port - easily said as I'm not very confident with soldering....are there any other solution?
well...I have to assume there is no alternative solution but try to replace the micro usb (or sell it as spare/repair).
Can't you just go to recovery mode and restore a backup or flash a ROM?
Hello everyone!
My SGSA has broken USB port, but it wasn't such a problem. I had uploaded TWRP and all the time I wanted to change the software it was just few clicks. This time I tried to install some other ROM (I was looking for perfect performance, so I tested about 25+ ROMs within a month. This instalation has formated /system partition and as I think many others, beacuse I can't even boot into recovery, phone stays at "Samsung Galaxy S Advance I9070" logo. I am able to boot into "Download Mode" but beacuse of broken USB port PC detects it as a malfunctioned device. I wanna add that I tried maaaany PC's and many USB cables to connect.
Hope for help, cheers
bnkv
bnkv said:
Hello everyone!
My SGSA has broken USB port, but it wasn't such a problem. I had uploaded TWRP and all the time I wanted to change the software it was just few clicks. This time I tried to install some other ROM (I was looking for perfect performance, so I tested about 25+ ROMs within a month. This instalation has formated /system partition and as I think many others, beacuse I can't even boot into recovery, phone stays at "Samsung Galaxy S Advance I9070" logo. I am able to boot into "Download Mode" but beacuse of broken USB port PC detects it as a malfunctioned device. I wanna add that I tried maaaany PC's and many USB cables to connect.
Hope for help, cheers
bnkv
Click to expand...
Click to collapse
Get that USB port replaced .. it doesn`t cost much . in india it costs only 200-rupees . Because if everything fails ODIN is your saviour and he can`t rescue you without a USB to PC connection .
I also have the same problem. After trying different ROMs, today I try to use Odin found The USB port is not recognized,
Is a Rom damaged a file or even damaged the Usb port? Can repair?
edit_2017-0205
I am very sorry for the reckless speculation.
2015-0903 I used Kies to upgrade my Chinese Simplified version of i9070 to ver4.12. Since the Simplified version of stock rom has something like Baidu and other useless apk
So I used TitaniumBackup to remove a lot of apk, more than a year have not used a USB cable link, just use the SD card to transfer files, this may be the reason, of course, may be physical damage to the USB port. Roms cause USB not to recognize just guess.
Now my phone recovery mode is still working, USB port can only charge..
I'm not good at English,,
TianNian said:
I also have the same problem. After trying different ROMs, today I try to use Odin found The USB port is not recognized,
Is a Rom damaged a file or even damaged the Usb port? Can repair?
edit_2017-0205
I am very sorry for the reckless speculation.
2015-0903 I used Kies to upgrade my Chinese Simplified version of i9070 to ver4.12. Since the Simplified version of stock rom has something like Baidu and other useless apk
So I used TitaniumBackup to remove a lot of apk, more than a year have not used a USB cable link, just use the SD card to transfer files, this may be the reason, of course, may be physical damage to the USB port. Roms cause USB not to recognize just guess.
Now my phone recovery mode is still working, USB port can only charge..
I'm not good at English,,
Click to expand...
Click to collapse
If your phone does charge, then it means that the phone USB port is not broken.
Make sure that you have Samsung USB drivers installed. You can also try other PC USB.
#Henkate said:
If your phone does charge, then it means that the phone USB port is not broken.
Make sure that you have Samsung USB drivers installed. You can also try other PC USB.
Click to expand...
Click to collapse
Thank you.
PC usb port and usb data cable is working, they can adb debug mode to link another phone. I tried the SAMSUNG USB Driver for Mobile Phones-1.5.51.0.exe and samsung KiesSetup-2.5.3 (andkies 2.63) on that day without success.
Now mobile phone recovery mod brush into the Rom, the phone can use.
I tried connecting my otg cable which was working before But the phone did not respond at all.
When I kept the cable connected(while my pendrive was still connected on the other end )without making any moment I turned my phone off and on. And woala it works but if I reboot my phone without the cable and then try connecting it with any device like storage media it does not just responds at all
All the devices used to work before. I haven't changed(neither updated) anything , running completely stock with a locked bootloader.
I tried it with an another Device as well as another cable both the cables were working and so was my pendrives.
I think it's some issue with the software!
It's giving me nuts... What should I do? Help me guys
Would be really thankful.
If you are rooted see if Chainfire's StickMount helps. Older,and doesn't require root is Chainfire's USB Host Diagnostics. This will be dependant on your ROM version. I know it doesn't work on my 7.1.2.
You might try cleaning your usb port.
Hi Guys,
I need to install custom recovery for my TAB S2 713 and I came across an issue in step 1. When connecting the tablet to my PC, it doesn't seem to recognise it.
- The tablet is charging which indicates that USB port is working
- I have enabled the USB debugging, installed drivers, used different PC and even a different cable and nothing seems to work.
Has anyone ever came across this problem? Factory reset didn't seem to help. I read on some forums that original Samsung charger can do the trick, however I no longer have one.
I would really appreciate any help since I need to install custom recovery for my tablet.
Million thanks in advance.