[Q] My LG optimus 2x can't turn on - LG Optimus 2x

Dear everyone
my phone can't turn on it just displays LG logo
Can someone tell me what I can do

somanavi said:
Dear everyone
my phone can't turn on it just displays LG logo
Can someone tell me what I can do
Click to expand...
Click to collapse
Try reflashing the rom! Which version you had?

Wolf80 said:
Try reflashing the rom! Which version you had?
Click to expand...
Click to collapse
I can't get "S/W Upgrade" mode

You were on Official ICS?

O2X has many ways to be switched on... it can also boot without battery ... if you are running stock rom (it doesn't matter much which one) then try to pull out battery (2-3s), place it back inside, then press and hold volume down button and power button till something happen... if you tried that, try to pull out your battery for longer time (i am not sure how long it has to be out but 24h will be enough), is is another way to factory reset your phone.
If that above didn't work you will have to do dirty job - flashing new rom via pc. If you never did that then find out some more info abou it first, but it is absolutly save. O2x is un-brickable phone...
---------- Post added at 09:47 AM ---------- Previous post was at 09:42 AM ----------
If you will have to flash new rom, then i can recommend you this one http://forum.xda-developers.com/showthread.php?t=1504280
- It is GB rom with extreme smoothness and battery life.
If you want something better then this JellyBean is very good: http://forum.xda-developers.com/showthread.php?t=2059372

I have same situation.... Friends O2x just stopped to work a week ago... Before that it was freezing and rebooting (i assume the reason is broken digitizer, although functional, but freezes mostly occur in temp changing.. for ex: leaving house....)
i cannot enter in recovery, i cannot enter in SW upgrade... every attempt of turning it on, or trying in recovery mode results with LG logo and than black screen (turned on, but black)...
SW is 2.3.4 stock... Is it possible to reflash, via PC, phone in that condition? (i didnt try yet, cause friend is in different town, but will send me phone tomorrow, and I'm now in stage of learning how to with LG (i own htc, have experience in flashing and stuff with samsung and motorola))
thans ALOT

cickvoa said:
I have same situation.... Friends O2x just stopped to work a week ago... Before that it was freezing and rebooting (i assume the reason is broken digitizer, although functional, but freezes mostly occur in temp changing.. for ex: leaving house....)
i cannot enter in recovery, i cannot enter in SW upgrade... every attempt of turning it on, or trying in recovery mode results with LG logo and than black screen (turned on, but black)...
SW is 2.3.4 stock... Is it possible to reflash, via PC, phone in that condition? (i didnt try yet, cause friend is in different town, but will send me phone tomorrow, and I'm now in stage of learning how to with LG (i own htc, have experience in flashing and stuff with samsung and motorola))
thans ALOT
Click to expand...
Click to collapse
As i said above o2x can be booted in million ways. One of them is polling out the battery, holding simultanously volume up and down and connecting it to pc... your phone will still look like dead piece of useless garbage but it will boot up in some kind of emergency mod. You will then have to download any custom rom and flash it to your phone.
... and again, as i said above, i recommend you flash one of these roms... that GB one o had for 1 month really good battery life and RAM management. Second one JellyBean is extremelly smooth but less battery conservative (as all 4xx+ roms), i have the JB one 3rd day and till now no problem

stingrey123 said:
As i said above o2x can be booted in million ways. One of them is polling out the battery, holding simultanously volume up and down and connecting it to pc... your phone will still look like dead piece of useless garbage but it will boot up in some kind of emergency mod. You will then have to download any custom rom and flash it to your phone.
Click to expand...
Click to collapse
Yeah, ive just found that way... I hope good will come . I will try to flash stock ICS v30b, as i saw it is OK for normal usage (he is not "hardcore" android user )
Thanks man , will be posting (hopefully) success

Oh i forgot to tell you that the JB rom (the install package not the rom itself) has a bug. It contains invalid META-INF folder and you would be unable to flash it. First you have to take meta-inf from version 3.2.0 of that rom and insert it into 4.0.0 archive but everyting is written in that forum thread
Hope i helped coz i am not developer... only user same as you
---------- Post added at 01:23 PM ---------- Previous post was at 01:18 PM ----------
cickvoa said:
Yeah, ive just found that way... I hope good will come . I will try to flash stock ICS v30b, as i saw it is OK for normal usage (he is not "hardcore" android user )
Thanks man , will be posting (hopefully) success
Click to expand...
Click to collapse
I wish you good luck .
And to inform you all 4+ roms are less conservative ICS included... tried TOPOGIGI ICS rom and although it was better then most Cyanogens it was still a lot worse then the GB i posted and if he really isnt that "hardcore user" then try the GB one... my o2x survived 8 days without charging and i was surfing on net about 2 hours per day .

Thread moved. Please post all your questions/requests for help here in Q&A in future.
Thanks
AvRS

@stingrey123
everything is solved!!!! even data restore... I did superflash method, but restore backuped data partition with AIO toolkit was not success

Related

Problem since 1 Week

r a Hey guys i hope you can help me.
My phone is a Galaxy S 2 without any branding. I have flashed the ParanoidAndroid Custom Rom 3 weeks ago and all seems to be ok. Last week i had to flash my phone in stock rom to send it to repair.
Now the repair is done and i want to flash the custom rom.
And there's the problem.
I rooted my phone, flashed the CWM-Recovery and the custom rom.The Rom starts and i can login in my phone. Every time the phone gets in standby by timeout i couldnt wake up the phone and can do nothing than a hard reboot.but than the phone stays at bootscreen and do nothing. After 30 sec. a screen with kernel panic appears. If this happens i can only flqsh the stock rom in download modus.
I have tried several roms.
I hope you can help me please.
Der_Lomi said:
r a Hey guys i hope you can help me.
My phone is a Galaxy S 2 without any branding. I have flashed the ParanoidAndroid Custom Rom 3 weeks ago and all seems to be ok. Last week i had to flash my phone in stock rom to send it to repair.
Now the repair is done and i want to flash the custom rom.
And there's the problem.
I rooted my phone, flashed the CWM-Recovery and the custom rom.The Rom starts and i can login in my phone. Every time the phone gets in standby by timeout i couldnt wake up the phone and can do nothing than a hard reboot.but than the phone stays at bootscreen and do nothing. After 30 sec. a screen with kernel panic appears. If this happens i can only flqsh the stock rom in download modus.
I have tried several roms.
I hope you can help me please.
Click to expand...
Click to collapse
In recovery - > Wipe data, wipe cache and dalvik cache. This may solve the bootloop. If the problem persists, re-insert a battery and flash the rom again (i think you'll able to go into a download mode).
flash
Every time i flash a new rom i make a full wipe. So that's not the problem. I also tried several kernel.
Maybe this helps http://forum.xda-developers.com/showthread.php?t=1619571
re
Thanks for that but all the things in the guide i have made....
Der_Lomi said:
Thanks for that but all the things in the guide i have made....
Click to expand...
Click to collapse
which rom do you flashed ?
rom
I tried several roms. ParanoidAndroid, BlueRom, resurrection rom... the problem stays at all roms...only the stock rom runs
Did you perhaps after the repair instead of your cell phone get a new version to another? Perhaps an i9100 or i9100g?
Sorry but my english is not very good....
Its the same phone
Der_Lomi said:
Its the same phone
Click to expand...
Click to collapse
Is your phone i9100 or i9100g? According you mention before, I think Resurrection rom is for i9100.
It's a GT-I9100 so the rom is for
I tried different solution but nothing works. Tried several roms, release and re-insert the battery, always make a full wipe before flashing, reflashing the rom.
The thing is:
I can flash a custom rom without problems...the new flashed rom starts without problems...BUT if the phone gets into standby and stays there for 1 min i can't wake up the phone...i can only hard reboot the phone..release the battery and re-insert it. Then the phone boits and stays at boot. I can only enter the download modus.
This is the forum for G-user!!!!!! This is the wrong forum for you, sorry....
Here´s also a GT-i9100 forum or not? if i´m wrong please send me a link where someone could help me please.
Here.....
http://forum.xda-developers.com/forumdisplay.php?f=1058
http://forum.xda-developers.com/forumdisplay.php?f=1204
please press thanx if this helps you.......
Der_Lomi said:
Here´s also a GT-i9100 forum or not? if i´m wrong please send me a link where someone could help me please.
Click to expand...
Click to collapse
i9100 n i9100g has nothing different then processor and main board but rest all is same installation flashing method etc etc so even if non G user post problem the solution to that might be same as solution to same problem on our G variant so non G users can be helped on G forum p Sub forum )
---------- Post added at 07:47 PM ---------- Previous post was at 07:44 PM ----------
Der_Lomi said:
It's a GT-I9100 so the rom is for
Click to expand...
Click to collapse
can you tell how you flash new roms
because on cyano Roms you have to flash first
then DO A DATA WIPE / FACTORY RESET

Hard bricked

So i've had a CM9 Beta 1 build on my phone, it was running like a charm past week, so while surfing around internet i've found a flashable zip that makes your status bar look like Jellybean (Specified it works with CM9 Beta 1!) and i've got stuck in recovery bootloop like the last time.
I've tried various way's, one of those was to reflash the ROM or flash a stock ROM from Odin, and it keeped getting stuck on stage VerifyPlatform...
So i've found a thread that fixes all of this mess with a .bat file for computer, and after using it my phone actually died.
I can't turn it on, it's all black..
I think i'm seriously lost...
I'm hoping for exact help that could fix it, not an maybe, i seriously need help! ;(
Kramtoske said:
So i've had a CM9 Beta 1 build on my phone, it was running like a charm past week, so while surfing around internet i've found a flashable zip that makes your status bar look like Jellybean (Specified it works with CM9 Beta 1!) and i've got stuck in recovery bootloop like the last time.
I've tried various way's, one of those was to reflash the ROM or flash a stock ROM from Odin, and it keeped getting stuck on stage VerifyPlatform...
So i've found a thread that fixes all of this mess with a .bat file for computer, and after using it my phone actually died.
I can't turn it on, it's all black..
I think i'm seriously lost...
I'm hoping for exact help that could fix it, not an maybe, i seriously need help! ;(
Click to expand...
Click to collapse
do u have i9001 or i9000?I dont know how to fix it.I would give it to samsung to repair it.
cistamlaka said:
do u have i9001 or i9000?I dont know how to fix it.I would give it to samsung to repair it.
Click to expand...
Click to collapse
It's i9001.
I can't give it to Samsung, it's rooted! D:
Kramtoske said:
It's i9001.
I can't give it to Samsung, it's rooted! D:
Click to expand...
Click to collapse
Did you try pulling out the battery for 15 minutes, then try to get to download mode?
Can u get into download mode?
If my post helped, don't mind hitting THANKS
drakester20 said:
Can u get into download mode?
If my post helped, don't mind hitting THANKS
Click to expand...
Click to collapse
So far i did not pulled out battery for 15 minutes, so i'm not sure if this is normal, but the download mode combination does not work. :/
See HERE,i think it would help you.
Lol.. I accidentally hit the thanks button... maybe u can throw one back...
So I was just gonna reply that he can't get into download mode so this is useless my friend..
If my post helped, don't mind hitting THANKS
---------- Post added at 11:59 PM ---------- Previous post was at 11:58 PM ----------
U don't even get that phone to pc disrupted like connection picture when u try to boot?
If my post helped, don't mind hitting THANKS
i9000 use hummingbird chip .. can use usb jig or if detect as sp5c110, can use unbrickable mod software to revive it (if not detect then have to do hw mod)
i9001 use different chip ie msm8255t .. try the button combination or usb jig to get into download mode. If it detect as qusb_load something then there might still have chance. If still nothing I'm afraid only jtag/riffbox can help.
I once bricked a Galaxy W i8150 (msm8255t) because of wrong bootloader flashed. Usb jig don't work. Had to use riffbox to revive it.
Yeah if jig doesn't work then u gotta replace the jtag
If my post helped, don't mind hitting THANKS
Hello, it's been a while. Thanks for all the feedback people.
I'm not trying to bump or anything, just saying that i've brought the phone to my carrier and played a little dumb game, lied and got it to be fixed. I hope to get good news soon.
Kramtoske said:
Hello, it's been a while. Thanks for all the feedback people.
I'm not trying to bump or anything, just saying that i've brought the phone to my carrier and played a little dumb game, lied and got it to be fixed. I hope to get good news soon.
Click to expand...
Click to collapse
Lols i almost got the same issue with my I9001. I would have blamed KIES...

ROM update stuck at S/W

Hi
Havn´t used my P990 for awhile, then heard that ICS was out so triede use LG Tool to update.
It started well, after dl. i got stuck at S/W scrren nothing happend for hours, so triede everything.
Ended up using Smartfaslh tool, then phone rebooted and i was back at 2.3.4
So again Lg Tool update, but no luck a critical error, so now i can´t update.
What can i do, the phone just restarts, the battery =? (i know its fully charged)
Im not a expert so be gentle with explanations.
SharDK said:
Hi
Havn´t used my P990 for awhile, then heard that ICS was out so triede use LG Tool to update.
It started well, after dl. i got stuck at S/W scrren nothing happend for hours, so triede everything.
Ended up using Smartfaslh tool, then phone rebooted and i was back at 2.3.4
So again Lg Tool update, but no luck a critical error, so now i can´t update.
What can i do, the phone just restarts, the battery =? (i know its fully charged)
Im not a expert so be gentle with explanations.
Click to expand...
Click to collapse
Hi mate, this All-In-One P990-Toolkit might help you.:good:
creison said:
Hi mate, this All-In-One P990-Toolkit might help you.:good:
Click to expand...
Click to collapse
Downloaded the official v30 rom and wanted to use option 6, so i could use a kdz file.
Get a script host file, saying the fil wasn´t found, its Automatic Offline Procedure.vbs
The file is there, under Tools.....
What can i then do???
SharDK said:
Downloaded the official v30 rom and wanted to use option 6, so i could use a kdz file.
Get a script host file, saying the fil wasn´t found, its Automatic Offline Procedure.vbs
The file is there, under Tools.....
What can i then do???
Click to expand...
Click to collapse
Have you try this LG_KDZ_FW-Update_OfflineFix?:good:
creison said:
Have you try this LG_KDZ_FW-Update_OfflineFix?:good:
Click to expand...
Click to collapse
Still the same....following the procedure in the word file, i still have to run automatic offline procedure.vbs
MSXML parser = ok
windows enabler = ok
USB debugging = ok
Running uptestex_mod2_Marvin.exe
Selectiing the dl. v30a.kdz and set to emergency
Clicking normal web upgrade test
Clicking upgrade start
It now opens LG software and yet again, please reconnect the phone, remove battery and try again.
I simple stuck and cant go further, the phone closes still adn reboots.
SharDK said:
Still the same....following the procedure in the word file, i still have to run automatic offline procedure.vbs
MSXML parser = ok
windows enabler = ok
USB debugging = ok
Running uptestex_mod2_Marvin.exe
Selectiing the dl. v30a.kdz and set to emergency
Clicking normal web upgrade test
Clicking upgrade start
It now opens LG software and yet again, please reconnect the phone, remove battery and try again.
I simple stuck and cant go further, the phone closes still adn reboots.
Click to expand...
Click to collapse
Hum try the methods in this post here if none of them work try with another cable doble check the computer driver seems something is geting corrupt in the phone and i dont think is the phone itself.
Goog Lucky :good:
SharDK said:
I simple stuck and cant go further, the phone closes still adn reboots.
Click to expand...
Click to collapse
I admire your patience, but are you interested in the end result, or in the process itself? Why not just try SmartFlash method, if you can't get this one to work? Extract BIN and FLS files from the KDZ, and flash them. For me, it works perfectly every time.
creison said:
Hum try the methods in this post here if none of them work try with another cable doble check the computer driver seems something is geting corrupt in the phone and i dont think is the phone itself.
Goog Lucky :good:
Click to expand...
Click to collapse
Result of Smarttools, looked like going good, then stopped, result added. Will try another.
I just want the phone to work proper again....
Tried again in another USB port, came a bit closer to the end.
Hmm, i don´t know what to say anymore.
SharDK said:
Tried again in another USB port, came a bit closer to the end.
Hmm, i don´t know what to say anymore.
Click to expand...
Click to collapse
These errors are not unusual, an the workarounds have already been posted... Two things you can try, both should work:
1. Flash one file at a time, e.g. FLS (baseband) first, and then the BIN (ROM itself).
2. Swap the files. Meaning, choose AP instead of CP, and vice versa. This way you can flash them both at once.
Cheers thanks a million, took 1 at a time and that worked. Android v. 4.04:good::good::good:
Did you try another cable?
Seems impedance problem as you already mention some progress after change the usb port.
Also try Nflash TG ICS28G it is a good idea, you can flash [ROM] TG P990 ICS V30A - Stable - Rom and Advanced Kernelfrom CWM after all.
---------- Post added at 08:06 PM ---------- Previous post was at 08:00 PM ----------
SharDK said:
Cheers thanks a million, took 1 at a time and that worked. Android v. 4.04:good::good::good:
Click to expand...
Click to collapse
Im glad you done :good:
creison said:
Did you try another cable?
Seems impedance problem as you already mention some progress after change the usb port.
Also try Nflash TG ICS28G it is a good idea, you can flash [ROM] TG P990 ICS V30A - Stable - Rom and Advanced Kernelfrom CWM after all.
---------- Post added at 08:06 PM ---------- Previous post was at 08:00 PM ----------
Im glad you done :good:
Click to expand...
Click to collapse
Didn´t have 1 that fit, so change 4 times USB port and when i got the first to go to 100% it then worked doing it in 2 steps.
It started fine, but didn´t see my wifi, anyway it looks a bit different from the old GB.
I see, im on TG V30a and very happy AWESOME rom pretty smoth and good battery life.

[Q] Totally messed up Phone

all tries i made to unlock the bootloader, install a usable rom or install a working recovery failed.
my system is totally messed up. booting to recovery results in a lge_security error and my android system process consumes 75 % of the battery power, its empty after 7 hours with display usage at 2 %.
unlocking and installing new roms would take days of trying. and all the numerous hours and several sorts of attempts i spent on it were pointless. i just want to sell this piece of s**t but without a stock firmware its not possible.
is there a method to restore the phone to stock state with a LG software tool for selling ?
if so, does it also work with the 262-000 phone which is truly the worst product i ever bought ?
please help, this is far from usable, even with my connected batterypack it just discharges slower and starts to heat like a stove.
greetings and lot of thanks for your suggestions.
Henka85 said:
all tries i made to unlock the bootloader, install a usable rom or install a working recovery failed.
my system is totally messed up. booting to recovery results in a lge_security error and my android system process consumes 75 % of the battery power, its empty after 7 hours with display usage at 2 %.
unlocking and installing new roms would take days of trying. and all the numerous hours and several sorts of attempts i spent on it were pointless. i just want to sell this piece of s**t but without a stock firmware its not possible.
is there a method to restore the phone to stock state with a LG software tool for selling ?
if so, does it also work with the 262-000 phone which is truly the worst product i ever bought ?
please help, this is far from usable, even with my connected batterypack it just discharges slower and starts to heat like a stove.
greetings and lot of thanks for your suggestions.
Click to expand...
Click to collapse
Seems as if i am not allowed to call members lazy when they don't try before they post, also seems i can't say it sucks to be them when they mess up their device and give up before they try anything
I Apologize @Henka85 please refer to my below post for the appropriate support
penguin449 said:
Lazy, Lazy, Lazy.
The only reply i can give is that it sucks to be you..
Click to expand...
Click to collapse
Lot of Thanks again.
I was looking for someone able to gíve an reply like "yes, there is such a kind of tool" or "no, there isnt".
The KDZ flashing methods and 90% of the tools here dont work or dont restore the recovery on 262-000.
I rather sell it really cheap than spending another days of my rare sparetime, just to discover i have to reflash KDZ with my current state.
Let me guess, you dont have the 262-000 version, so easy to speak for you, probably.
Henka85 said:
Lot of Thanks again.
I was looking for someone able to gíve an reply like "yes, there is such a kind of tool" or "no, there isnt".
The KDZ flashing methods and 90% of the tools here dont work or dont restore the recovery on 262-000.
I rather sell it really cheap than spending another days of my rare sparetime, just to discover i have to reflash KDZ with my current state.
Let me guess, you dont have the 262-000 version, so easy to speak for you, probably.
Click to expand...
Click to collapse
In future, if you don't know what your doing, then just don't do it, if this was your first device you was to mess with, then it should either have been a spare/old phone you wouldn't mind mucking up, flash the .kdz and see what happens, if you get bootloop it means progress, if your bootloader is not unlocked and you have the error, there is already a thread on it, just do a quick search, a softbricked 4x HD is worth less then half as much as a working 4x HD, try out the toolkit, and try get an adb connection, can be achieved through bootloops sometimes!
Henka85 said:
Lot of Thanks again.
I was looking for someone able to gíve an reply like "yes, there is such a kind of tool" or "no, there isnt".
The KDZ flashing methods and 90% of the tools here dont work or dont restore the recovery on 262-000.
I rather sell it really cheap than spending another days of my rare sparetime, just to discover i have to reflash KDZ with my current state.
Let me guess, you dont have the 262-000 version, so easy to speak for you, probably.
Click to expand...
Click to collapse
kdz flasher works on any version. if it doesnt work for you, try another usb port, or another os, or another computer. it must work, there's nothing telling it not to work in case it's 262-000. try kdz flasher, try lgflashtool, try another firmware. it must work, unless there's a hardware fault, but there most likely isn't
I have a 262-000 and I'm running vanir 4.3 without ANY problems...
I might have to say that the fault lies on you
But you should probably check your drivers or reinstall them if flashtool doesn't work for you.
Once had a similar problem caused by bad/wrong drivers.
Sent from my 4x HD
And don't forget not to use Windows 8, it doesn't work. Use XP or 7.
Gesendet von meinem LG-P880 mit Tapatalk 4
muellersmattes said:
And don't forget not to use Windows 8, it doesn't work. Use XP or 7.
Gesendet von meinem LG-P880 mit Tapatalk 4
Click to expand...
Click to collapse
win 8 here. flashed my phone uncountable times with KDZ updater.
Problem with vanir 4.3 on my P880
Hi ..
I just flashed the VANIR 4.3 on my P880 ,, every thing is ok & I can make outgoing calls , BUT I CAN,T recive any .... when some one dial in my number it t,s busy ( seems like Black list enabled for all incoming ) & I tdiabled Black list & still have the problem .. !!!!! ??? any Ideas ??
I tried CM10.2 & Mokee rom & it was working nice without problems & when I got back & flashed Stock Rom it worked OK too .... so there must be a trick in VANIR which i don,t know ...
i tried to send in the official VANIR thread but i couldn't, cause i,m not allowed cause i,m not a developer .
Edited :
Plrblem solved after applying Google Apps & connected to google services ..
the guide to go back to original rom is here.
if u wanna go give it a good try to install a custom rom, do it. your problem there is the adb drivers. u havent installed the adb drivers for the phone to go to adb and unlock the bootloader. if u cant install adb drivers , the easy way is to install the android sdk x32 version ( even if u r on x64 windows ) and update it. And i will agree on the above thread. u are lazy u should do a very very good search in forum for guides to help u do whatever u want. to root - unlock bootloader - install recovery - install a custom rom is like 30 minutes in total if u follow a good guide !
edit: oh i was really late to see the thread so problem is solved?
---------- Post added at 07:54 PM ---------- Previous post was at 07:50 PM ----------
Life'sGood said:
win 8 here. flashed my phone uncountable times with KDZ updater.
Click to expand...
Click to collapse
i was on windows 8 x64 when i used it. it worked fine

DEAD or DEATH BOOT/battery totally drained

So my phone's not yet fixed since the 25th of December due to sudden death - http://forum.xda-developers.com/showthread.php?t=2585068
We had it checked again last Thursday, January 3rd. The technician said that the replacement of motherboard is not yet clear to be the best solution as the technicians from the Sony Service Center hadn't opened the phone yet. He said that it might have been a cause of a dead or death boot. Has anyone heard of it? He says not only Sony phones are experiencing this dead or death booth, even other brands. Kind of random.He said that the phone somewhat hangs, the screen isn't on but the system is still running which causes the phone to become warm or hot. And he also said that this lead to the battery getting totally drained. As per him, once the battery is totally drained it won't get charged even if I try to charge the phone for a number of hours. So what he will do when I get back to him on Monday is he will first try to shock the battery to see if it will be revived (which I hope this is just the case) and then dload some firmwares or softwares to fix the unit.
I hope this ordeal will be solved this following week as it's been so inconvenient on my part and I terribly miss my phone.
One of possibility is that they will open the back cover, pull out the battery and charge it to full, then they put it back and flash the stock firmware. With battery charged they have enough time for flashing and the phone should turn on. If it's Sony Center to do that they will also seal the phone as original to get fully working waterproof.
eclyptos said:
One of possibility is that they will open the back cover, pull out the battery and charge it to full, then they put it back and flash the stock firmware. With battery charged they have enough time for flashing and the phone should turn on. If it's Sony Center to do that they will also seal the phone as original to get fully working waterproof.
Click to expand...
Click to collapse
I really, really, really hope it'd work. For the waterproofing it would be fine to take it to the Sony service centre just to have the full waterproofness back.:good:
Just flash kernal from,any firmware by flash tool,and put your cell phone on charge.,it will charge... The same thing happen to me
Sent from my C6903 using xda app-developers app
shahzaib.khan said:
Just flash kernal from,any firmware by flash tool,and put your cell phone on charge.,it will charge... The same thing happen to me
Sent from my C6903 using xda app-developers app
Click to expand...
Click to collapse
Flashmode not working and fastboot too the deviice is HARD BRICKED !!!
Meni30 said:
Flashmode not working and fastboot too the deviice is HARD BRICKED !!!
Click to expand...
Click to collapse
Have you managed to find a way to fix it?
I think my phone is hard bricked becuase its stuck on the Sony logo and my pc wan't detect it and none of the buttons work
SpawnCube said:
Have you managed to find a way to fix it?
I think my phone is hard bricked becuase its stuck on the Sony logo and my pc wan't detect it and none of the buttons work
Click to expand...
Click to collapse
Hey guys, do the devs a favour: NOT EVERY SIMPLE BOOTLOOP IS A BRICKED DEVICE!!!
Just go to recovery and wipe everything, it then should boot without problems.
if it doesn't, first check yourself (e.g. did you flash a 4.4 kitkat without flashing a new kernel for it?)
the answers for nearly all problems are here on xda-developers ... just read, read and read and understand ... if you don't know, what you do with flashing your device, what the partitions data / cache / system are for, what a kernel is or what the differences between stock roms, custom rom releases and nightly builds is, you simply SHOULD NOT flash your device.
If you understand what you are doing and if THAT ALL doesn't help you and you think you have a problem noone else have (i allready had such a thing with my defy+, it got bootloop and it was a dead memory chip) THEN (and just then) post your problem here. The devs simply don't have the time to help everyone who simply can't read the existing threads.
Thanks (and dont get angry on me, just saying so you can do it better the next time)
DJ_Synergy said:
Hey guys, do the devs a favour: NOT EVERY SIMPLE BOOTLOOP IS A BRICKED DEVICE!!!
Just go to recovery and wipe everything, it then should boot without problems.
if it doesn't, first check yourself (e.g. did you flash a 4.4 kitkat without flashing a new kernel for it?)
the answers for nearly all problems are here on xda-developers ... just read, read and read and understand ... if you don't know, what you do with flashing your device, what the partitions data / cache / system are for, what a kernel is or what the differences between stock roms, custom rom releases and nightly builds is, you simply SHOULD NOT flash your device.
If you understand what you are doing and if THAT ALL doesn't help you and you think you have a problem noone else have (i allready had such a thing with my defy+, it got bootloop and it was a dead memory chip) THEN (and just then) post your problem here. The devs simply don't have the time to help everyone who simply can't read the existing threads.
Thanks (and dont get angry on me, just saying so you can do it better the next time)
Click to expand...
Click to collapse
Thanks, you just said what I wanted to say.

Categories

Resources