So basically I installed I wiped /system /data and /cache because I kept getting problems with CMW. Now I cant boot up or boot into CMW. I tried installing KIES to get it working but it still shows up as an unknown device. I tried on a another computer and it shows up as Gadget serial. I cant connect it with odin without the drivers so basically I cant do anything.... If anyone knows how I can solve this problem that would be great!
Alright, I tried on a third computer an was able to get it working. I flashed the stock rom and I keep getting:
E:format_volume: make_extf2fs failed on /dev/block/stl10
whenever I try to wipe data/factory. Not sure but I think somethings wrong with the partitions?
Try to install these drivers - http://code.google.com/p/insanity/downloads/detail?name=usb_drivers_GalaxyS_x64.zip&can=2&q=
Later just install stock 2.3.3 via Odin with modem drivers, then flash root and have fun with CWM again.
I have all the drivers so I can now flash via Odin. Only problem now is that I have an unbranded p1000 and I didn't take down the model version so I don't know which stock ROM to work with. Is there a stock ROM and modem that'll work with every p1000 model?
try with the one linked to in my signature.
The Gb-stock-safe-v5 from overcome.
It is a package containing JQ1 stock rom and other tools and bits.
The ROM itself is a complete package that has bootloader, pit files and other files.
There are even a few modem.bin files to choose from.
Download the PDF guide if you want to be sure how to place them in Odin.
Jump to page 7 of the PDF.
If you continue beyond page 7, that will be the guide to install Overcome ROM. So stop at page 7 and you have stock.
Actually all stock ROM for P1000 will work with your P1000, and JPZ is the most common modem to use.
Related
INSTALLED Darky's v5.2 Gingerbread Edition VIA CWM AND WHEN START TO BOOT MY SON TURNED IT OFF ,
NOW I CANT GET INTO RECOVERY ONLY DOWNLOAD MODE WORKING HOW TO FIX THAT
had no lagfix before install and flashed the phone before wit diferent roms without any problem
If your phone is able to go into Download mode, you should be fine.
You can use odin to flash stock eclair 2.1 onto your SGS. If you're not too sure how, have a look around the forum and there should be plenty of advice on how to go about it.
If, somehow, you can't find anything, reply here again and I'll see if I can help you out.
I haven't done the same thing but the result is pretty much the same, stuck with a boot loop after installing Bell provided Android 2.2 upgrade. I can now only get into download mode, could you guide me where I can the instruction to load the stock 2.1 firmware that contains the bootloader and where I can download the files so I can try to make it work again. Thanks
Everything you need, you should be able to find on http://www.samfirmware.com , including Odin (the software used for flashing) and some guides.
Be sure to download the firmware for your location ie. Europe, Asia, America.
Read darkys thread. Do the long install. Simple.
Also the first boot with darkys rom takes about ten mins. It says so on install instructions. People panic for no reason because they get impatient
Downloaded the firmware already but it is in a .rar password protected, I am looking for the .tar of the same file I9000UGJH2. Found another site with the .exe but not sure how to use this one with Odin, the exe autoextract, but the file does not contains the .tar file and cannot find the info on how to configure Odin with this. I Will continue my research. Thanks for the info
The password is different depending on which file you downloaded. Go back to samfirmware and see whether the file had a # or ## or neither.
# Pass = samsung-firmwares.com
## Pass = samfirmware.com
Just flash any stock firmware via Odin and you'll be fine.
Thanks all for your assistance, can't wait to leave work and try that.
Maxx
thanks
i got it working again flashed with odin stock firmware
My i9000 is on i9000xxjvb stock rom. I flashed modified kernal to make it rooted and cwm enabled. I am unable to move appear from phone memory to internal SD. An error message appears " failed to move application, not enough memory."
To get rid of this, i tried Hamsterbread 1.1 custom rom, but problem not solved. I used every method from hard reset to wipe cache, data and more. But nothing happened.
Now I want to downgrade to froyo. I don't know how to do this? Please, tell the procedure in detail and step by step. I belong to India. There is no 2.2.1 version available for India. Can I go for other regions versions? or I should stick with i9000ddjp6 which is latest verison for India. Thanks
i havnt tried downgrading. but i think you could try flashin back using odin with bootlooder froyo.
i live in india but use european firmware an see no problem
^^ Im not sure about this. I think you can just flash a Froyo ROM via CWM. I am not sure about this. It always makes sense to search around before you do either. Good Luck!
If you flash speedmod (or whatever froyo kernel you choose) through odin, then simply install whatever rom through cwm via zip file. The downgraded froyo rom doesn't need bootloaders, the gingerbread ones are backwards compatible. Tried it myself and it worked without a hitch.
Just flash any stock firmware through ODIN with pit and repartitioned tick and you are good to go.
Makes sense to open eyes and read the post that tells you how .Or even use the search button .
http://forum.xda-developers.com/showthread.php?t=1033781
jje
just download a stock froyo firmware and flash with odin. there are tutorials all over the place
just flash froyo kernel using odin and then enter clockwordmod install zip
I have a problem on my i9000 galaxy s
It stuck in a loop on galaxy logo at first
after that i decided to change the rom
when the phone rebooted by odin and came to recovery mode to install packages,
it shows me an error like this:
E:faild to mount /sdcard (File exists)
...
.
I tried to wpe data factory and wipe cache
but it's still get the error and stuck in a loop on startup.
any solution plz?
I think you will need to flash back to stock , i had this issue with mines. I flashed back to stock with Odin.
How can i do that?
Go yo samfirmware.com and go into toolbox section and flash stock gingerbread through Odin. instructions and guides are given on the site along with Odin software and stock gb files.
Sent from my sgs
kernel: galaxian
Rom: jetpack
not worked
What happened ? And are you familiar with Odin ? Are you putting the correct files in the correct box ?
yes , yes, im familiar with odin.
I tried to flash my phone with a Rom that have bootloader.
my phone comes up with android 2.2.1 sucessfully BUT unfortunately my internal 8G sdcard is not unvailable yet.
Try flashing to GingeBread 2.3.4 (will post a link) but be very carefull when doing so, because semi-brick is possible. What rom did you try and flash. Read the tutorial carefully and use the odin they say to use.
http://www.theandroidsoul.com/xxjvp-android-2-3-4-firmware-galaxy-s-install-and-download/
Thanks for reply.
I've done every thing but it didn't come back. still my phone's memory is unavilable.
is it possible that it be hardware problem?
how can i be sure?
any suggestion ?
hi,
i appear to have the same problem.
have followed the intructions in the posted tutorial to the letter without joy.
can anybody help or does it need to go back to samsung?
thanks
download terminal emulator and type ls /dev/block/mmcblk0*
a normal phone has mmcblk0, mmcblk0p1 and mmcblk0p2.
if you don't see it, internal storage is probably broken.
What do you mean by Terminal Emulator?
I should install it on my phone or its a pc program?
I found a Terminal emulator for android but i can't install it because of "There's not enough space.."!!!
Hello everybody,
I've been following some posts around the forum for some time now.
So I decided to flash my Samsung Galaxy S + with the newest stock firmware.
I first tried Odin, but that was no succes because VirtualBox couldn't handle it and just crashed when it started to upload the roms into my phone.
So it was bricked first, but got it back up and running.
I'm using linux as my OS, so of course I found Heimdall.
This seemed a nice tool, but I found out that the package format needs to be else then how the stock roms are delivered.
At last I tried to flas using the dd method.
I did the command dd if=...img of=dev/block/mmcblk0p.. bs=4096 for all partition images.
I managed to start the flashed roms. Only I found out that after installing some apps and after a few reboots the system starts to get faulty.
All of a sudden Play Store doesn't install apps anymore "Package Invalid" error, and for some reason also after each reboot more apps start to dissappear (get replaced by sd-card icon but unable to open or reïnstall).
Also I did a factory reset after dd'd the images into my phone, cause that's what everybody recommends.
The roms I've tried so far were XXKQB and XXKP1, both with the same issues.
The original firmware which came with my phone is: XXKPG.
Hopefully somebody can point me in the right direction in getting a newer rom onto my pda.
Greetings PsychoGame
I suggest you use a PC, im sure you will find one somewhere, friend/neighbour/relative. Then use Odin to flash.
Odin firmwares
Sammobile.com You should find I9001 firmware here
http://forum.xda-developers.com/showthread.php?t=1102881 Not sure if compatible with I9001
Or if your persistent have you tried here. **Check if compatible** If its an older firmware, connect to Kies and it should update to the latest.
JUST NOTICED THE I9001 CHECK THAT THE FIRMWARE IS COMPATIBLE
I agree with Talon, use ODIN on a windows-based machine... In any case you can always install windows on a different partition, but it's not worth it. For me the whole flashing process only lasted for 4 minutes, so just grab a PC somewhere and install it...
I also recommend KQE insted of KQB as the wifi is fixed
Hello,
I will start with saying that Ive already checked every tutorial in every android website.
here is what I did.
I had Miui (Not the ICS one) I have tried to flash CM9 with the existing recovery. than something somewhere on the flash procedure go wrong and the phone just rebooted and putted in loop with no recovery option but download option. so I tried to flash the stock rom using odin 1.85, and the phone just looping on the image of the mobile operator. I did this procedure with the odin for more stock roms I found.
thanks in advance really I need your help...
http://www.theandroidsoul.com/xxjvu/
maybe you forget ‘Re-Partition’checkbox, it's important.
Hmmm.. perhaps, you have to make sure all the files are properly placed (depending on the ROM you are installing). Also, I'd recommend using a pit file (and don't forget to click on "Re-Partition".. So far, it worked for me. ^.~