Just like title says... I install GingerDX 2.3.7 v29 on x8... Everhtying goes fine but when i turned off it stayed on GingerDX logo, couple of times logo is in loop the just freez..
I use kernel 08a-DX alfs, and v08a-cm7 alfs.... both times same...
iPlayboy said:
Just like title says... I install GingerDX 2.3.7 v29 on x8... Everhtying goes fine but when i turned off it stayed on GingerDX logo, couple of times logo is in loop the just freez..
I use kernel 08a-DX alfs, and v08a-cm7 alfs.... both times same...
Click to expand...
Click to collapse
Your phone may have just been softly bricked (bootloop). You didnt install the ROM correctly or it is not compatible with the kernel.
Check the ROM's thread to see, otherwise repair it using Sony Ericsson companion.
Hope it helped
catalinjulia said:
Your phone may have just been softly bricked (bootloop). You didnt install the ROM correctly or it is not compatible with the kernel.
Check the ROM's thread to see, otherwise repair it using Sony Ericsson companion.
Hope it helped
Click to expand...
Click to collapse
I know it is.. And i use SEUS... So which kernel is compatible with GinderDX 2.3.7 v29
iPlayboy said:
I know it is.. And i use SEUS... So which kernel is compatible with GinderDX 2.3.7 v29
Click to expand...
Click to collapse
Look in the Gingerdx thread..
There u will get supported kernels & their respective links
see my app sig at your own risk :
sent from my W8 running on armv7 processor problem??
If u are able to go into the recovery, u can factory reset data and delvik cache and then reboot.
Hope it works for you...:thumbup:
Officially corp via W8 using ixperia
leecorp said:
If u are able to go into the recovery, u can factory reset data and delvik cache and then reboot.
Hope it works for you...:thumbup:
Officially corp via W8 using ixperia
Click to expand...
Click to collapse
do factory reset through CWM and wipe dalvik cache... it should work
Ok thx guys for replays... I will try it..
Related
I start from begin because it was to laggy.
Now I installed 2.1. and i rooted my x8.
Then i installed xrecovery and i wanted to install gcr. 8. and 8.1. but it just restart.
Then i tried with gingerDX and happend the same.
I ve tried full wipe but didnt help.
Help please
Check your baseband, maybe accidentaly you installed old one
Sent from my X8 using XDA App
Install cwm and try with it, because gdx must be installed with it and also you can install gc8. 1 with it, i know because i did it
Sent from my X8 using XDA App
dsaklein said:
Check your baseband, maybe accidentaly you installed old one
Sent from my X8 using XDA App
Click to expand...
Click to collapse
Good advice, check your baseband, it must end on "015", as stated in the tutorials.
Install GingerDX only via CWM.
Do a full wipe and then install the rom, it should work.
Tomislav995 said:
I start from begin because it was to laggy.
Now I installed 2.1. and i rooted my x8.
Then i installed xrecovery and i wanted to install gcr. 8. and 8.1. but it just restart.
Then i tried with gingerDX and happend the same.
I ve tried full wipe but didnt help.
Help please
Click to expand...
Click to collapse
hi try flashing froyobread v021 as this will give you cwm as gdx will only install with cwm not x-recovery when you have installed froyobread reboot you x8. when you see the sony ericsson logo tap the screen repeatedly this will take you in to cwm now you can install gdx.v019
unlock bootloader
maybe try to unlock bootloader using msm7227_semc.cmd
http://forum.xda-developers.com/showthread.php?t=1254225
thanks guys but I have buyed
so i installed MiniCM7 2.0.9. My old ROM is FroyoBread. i Installed MiniCM7 Without nAa Kernel because when flashing kernel i got error.
For now my device stuck at "sony ericsson" bootscreen.
ive tried SEUS,PCC and no work.
what should i do ?
xRec and CWM cant be open.
Help please thanks.
Did you unlock your bootloader?
Sent from my W8 using xda premium
You must go to flashtool folder/drivers and install ggsetup click thanks button if i helped you
uDroid said:
so i installed MiniCM7 2.0.9. My old ROM is FroyoBread. i Installed MiniCM7 Without nAa Kernel because when flashing kernel i got error.
For now my device stuck at "sony ericsson" bootscreen.
ive tried SEUS,PCC and no work.
what should i do ?
xRec and CWM cant be open.
Help please thanks.
Click to expand...
Click to collapse
If you still see " Sony Ericsson" bootscreen, then you still in stock kernel and have not install the aNa Kernel! MiniCM7 cannot install on stock kernel! you cannot use aNa Kernel, if you have not unlocked your bootloader!
Look at the date of manufacturing carefully, otherwise you may brick your phone! PM if you desperate!
Were you be able to connect to your PC? If so, then Flashtool may help!
hi frnds i unlocked bootloader for my w8 device
and flashed nAa kernel from then my stoped at nAa kernel logo but i am able to get into clock work mode
dont knw to get my w8 work
plzz hlp me
Rom? Wiped data?
Sent from my E15i using xda premium
Did you follow the tutorial step?
Should be no problem.
you have no problem with bootloader, your bootloader is being successfuly unlocked.
as long as you can access cwm, full wipe and reinstall the rom, everything should be fine!
chetanchowdary6 said:
hi frnds i unlocked bootloader for my w8 device
and flashed nAa kernel from then my stoped at nAa kernel logo but i am able to get into clock work mode
dont knw to get my w8 work
plzz hlp me
Click to expand...
Click to collapse
yeah,,,
if you still can access cwm, everything will be fine..
musn't flash kernel to downgrade cz u don't have softbrick issue
you can reflash the kernel - backup
factory reset, etc
Flash ROM
done! :laugh:
I searched a lot in all threads to find a similar question or just an answer to my problem.
To start I have to tell you that I already had the v029 installed with the stock kernel and everything was fine.
Then I wanted to check some other roms and if they fit me better. So i got it from the begining. Wiped everything and installed the stock eclair with PCC. Unlocked the bootloader through a very usefull guide found here and flashed the latest nAa kernel. Then I downloaded the MiniCM9 3.0.5 Rom and installed it succesfully.
Everything is working fine but I wanted to go back to GingerDX. So I did a factory reset/wiped everything downloaded the rom for the nAa kernel and installed it. It said that it was successfuly installed. But when I try to boot my phone It stucks on the GingerDX splash screen with the animation and doing nothing. No keys working. I removed the battery to shut down, install the CM9 rom again and everything's fine.
Can you please tell what am I doing wrong? Thanks in advance.
Toumpeki said:
I searched a lot in all threads to find a similar question or just an answer to my problem.
To start I have to tell you that I already had the v029 installed with the stock kernel and everything was fine.
Then I wanted to check some other roms and if they fit me better. So i got it from the begining. Wiped everything and installed the stock eclair with PCC. Unlocked the bootloader through a very usefull guide found here and flashed the latest nAa kernel. Then I downloaded the MiniCM9 3.0.5 Rom and installed it succesfully.
Everything is working fine but I wanted to go back to GingerDX. So I did a factory reset/wiped everything downloaded the rom for the nAa kernel and installed it. It said that it was successfuly installed. But when I try to boot my phone It stucks on the GingerDX splash screen with the animation and doing nothing. No keys working. I removed the battery to shut down, install the CM9 rom again and everything's fine.
Can you please tell what am I doing wrong? Thanks in advance.
Click to expand...
Click to collapse
Wipe cache & dalvik cache while before installing
Sent from my X8 using xda app-developers app
I did and it's stuck again. I waited for 10 minutes before I closed it.
Does the kernel for CM9 supports gb?
Sent from my X8 using xda app-developers app
Wipe cache
dalvik cache
and fix permision
I have the 2.6.29.6-nAa-ics-04 kernel
I guess its not for gb. I'll download this one and check again http://forum.xda-developers.com/showthread.php?t=1350484
Thanks a lot for your time.
Toumpeki said:
I have the 2.6.29.6-nAa-ics-04 kernel
I guess its not for gb. I'll download this one and check again http://forum.xda-developers.com/showthread.php?t=1350484
Thanks a lot for your time.
Click to expand...
Click to collapse
There is a thanks button...
Press it
Sent from my X8 using xda app-developers app
Toumpeki said:
I have the 2.6.29.6-nAa-ics-04 kernel
I guess its not for gb. I'll download this one and check again http://forum.xda-developers.com/showthread.php?t=1350484
Thanks a lot for your time.
Click to expand...
Click to collapse
Any luck? I just installed the kernel on the link you posted and have the exact same problem. The boot screen stays on the splash animation. It's been there for more than 15 minutes and the animation itself is slow as hell.
Hi there..
When we switch between GB and JB kernels we must format /system /data and /cache when we flash the new kernel.
Yes, I flashed the kernel in the link and then the gingerdx rom. I did the wipe in data/cache/dalvik cache and everything else that is needed.
The only thing that occured was a problem in the format during the installation. I formated it manually before the install and it was ok.
Sent from my X8 using xda app-developers app GingerDX
sacoplastico said:
Any luck? I just installed the kernel on the link you posted and have the exact same problem. The boot screen stays on the splash animation. It's been there for more than 15 minutes and the animation itself is slow as hell.
Click to expand...
Click to collapse
Full wipe before installing.
Yes..
there must be a problem with wiping...
You might have forgot to full wipe..
Thank you everybody, I finally managed to get GingerDX running. Wiping everything actually worked.
Still took ages to boot but it is finally on!
Maybe u need naa ics kernel.
Sent from my iXperiA 8s using xda app-developers app
erulsza said:
Maybe u need naa ics kernel.
Sent from my iXperiA 8s using xda app-developers app
Click to expand...
Click to collapse
No, you cant flash gb roms with ics kernels.
I've searched through XDA (manually and with search function) but can't find the answer I need, so am trying here hoping someone will help.
I was running GingerDX v29 on my X8, happily, when I was notified of an update to v030. I left it a few days and then got the notification of an update to v031b. There was two options on the screen: Download GingerDX v031b, or download GingerDX stock. I figured since I'm already using GingerDX I should be able to just download the new version rather than the stock.
So I downloaded it to my SD card, rebooted to CWM and choose to install the download. All seemed to go through fine, I got a success message, and was invite to reboot. I rebooted, and I'm now stuck with "Sony Ericsson" across my screen and nothing else. No access to CWM etc.
I guess I have two questions:
1) Can I get back to v29 or finish off the update to v031b, without having to erase everything and redo whatever it was I had to do to get v29 on there in the first place (v29 was the first ROM I installed on my handset)?
2) What should I have done when presented with the options for upgrading? (I'd kinda like to acoid the same mistake in future.)
All help gratefully received, and I'll be liberal with the Thanks button
TIA
in CWM wipe cache and dalvk cache
if phone doesnt boot flash v29 back and create backup
than flash 31b,wipe data/cache and advance restore data from backup created earlier...wipe cache again
good luck
and post questions in Q/A section
fotak-x said:
in CWM wipe cache and dalvk cache
Click to expand...
Click to collapse
Unfortunately I'm stuck at the Sony Ericsson screen and can't get to CWM...
Thanks though.
(Can a moderator move this to the right forum if this is the wrong one?)
pgd80 said:
I've searched through XDA (manually and with search function) but can't find the answer I need, so am trying here hoping someone will help.
I was running GingerDX v29 on my X8, happily, when I was notified of an update to v030. I left it a few days and then got the notification of an update to v031b. There was two options on the screen: Download GingerDX v031b, or download GingerDX stock. I figured since I'm already using GingerDX I should be able to just download the new version rather than the stock.
So I downloaded it to my SD card, rebooted to CWM and choose to install the download. All seemed to go through fine, I got a success message, and was invite to reboot. I rebooted, and I'm now stuck with "Sony Ericsson" across my screen and nothing else. No access to CWM etc.
I guess I have two questions:
1) Can I get back to v29 or finish off the update to v031b, without having to erase everything and redo whatever it was I had to do to get v29 on there in the first place (v29 was the first ROM I installed on my handset)?
2) What should I have done when presented with the options for upgrading? (I'd kinda like to acoid the same mistake in future.)
All help gratefully received, and I'll be liberal with the Thanks button
TIA
Click to expand...
Click to collapse
Are you using a custom or stock kernel?
Sent from my GT-I9100 using xda premium
Titan9119 said:
Are you using a custom or stock kernel?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
"sony ericsson" logo on boot...thats stock kernel
Yeah, I think it's stock (I soft-bricked the handset once before, and followed instructions elsewhere on XDA to unbrick it - I think those instructions used a stock kernal)
Sent from my Transformer TF101 using xda app-developers app
pgd80 said:
Yeah, I think it's stock (I soft-bricked the handset once before, and followed instructions elsewhere on XDA to unbrick it - I think those instructions used a stock kernal)
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
Hmm...then did u wipe data/cache?
Sent from my GT-I9100 using xda premium
pgd80 said:
I've searched through XDA (manually and with search function) but can't find the answer I need, so am trying here hoping someone will help.
I was running GingerDX v29 on my X8, happily, when I was notified of an update to v030. I left it a few days and then got the notification of an update to v031b. There was two options on the screen: Download GingerDX v031b, or download GingerDX stock. I figured since I'm already using GingerDX I should be able to just download the new version rather than the stock.
So I downloaded it to my SD card, rebooted to CWM and choose to install the download. All seemed to go through fine, I got a success message, and was invite to reboot. I rebooted, and I'm now stuck with "Sony Ericsson" across my screen and nothing else. No access to CWM etc.
I guess I have two questions:
1) Can I get back to v29 or finish off the update to v031b, without having to erase everything and redo whatever it was I had to do to get v29 on there in the first place (v29 was the first ROM I installed on my handset)?
2) What should I have done when presented with the options for upgrading? (I'd kinda like to acoid the same mistake in future.)
All help gratefully received, and I'll be liberal with the Thanks button
TIA
Click to expand...
Click to collapse
you should have downloaded gingerdx for stock since you are on stock kernel. i guess gingerdx stock means the one for stock kernel
Titan9119 said:
Hmm...then did u wipe data/cache?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
I think I did (as part of the v029 install (or maybe it was the v030 install - I can't even remember which one of those I was on)), but I can't say for sure. I definitely didn't when I tried to update to v031b. I just ran the .zip and when I got the confirmation of success I rebooted. Haven't got passed the Sony Ericsson logo since.
CnC-ROCK said:
you should have downloaded gingerdx for stock since you are on stock kernel. i guess gingerdx stock means the one for stock kernel
Click to expand...
Click to collapse
What would I need to have been running in order to have used the GingerDX v31b? (Sorry - I'm still learning about stock, kernels, ROMs, Alfs, nAa etc, so don't yet understand what they all mean / do / are used for.)
Is there any way I can recover my phone without having to reinstall all my apps etc?
pgd80 said:
What would I need to have been running in order to have used the GingerDX v31b? (Sorry - I'm still learning about stock, kernels, ROMs, Alfs, nAa etc, so don't yet understand what they all mean / do / are used for.)
Is there any way I can recover my phone without having to reinstall all my apps etc?
Click to expand...
Click to collapse
you have unlocked bootloader? if so then flash custom kernel and it will boot fine.
you can use adb to backup your apps or flash back the previous version and backup them.
you might have downloaded the rom that was not for stock kernel.
your phone is soft bricked, can be repaired using sony pc companion.
Look for a thread to repair a soft bricked phone.
its so easy..
i am stuck for 2 day. i do for many way for disolve my problem. stuck in logo sony, because i wipe, and i dont install new/custom kernel.
i want install jelly bean
many flash i tried cannot fix this problem
for last step, i download latest "pc companion"
and i follow step by step.
fail and try. error and try.
failed connect and i try..
(i forget my capacity baterries is low)
and bla bla bla....... pc companion can fix this problem
with factory kernel
and factory os: "ENCLAIR" KKKKKKKK
ending of stories ... i install again with rom ginger
i hope can solve your problem
i bricked my phone installing stock gingerdx to custom rom.... sm1 plz help... wifi nt working cmw nt working.. is my x8 lost
x8bricked said:
i bricked my phone installing stock gingerdx to custom rom.... sm1 plz help... wifi nt working cmw nt working.. is my x8 lost
Click to expand...
Click to collapse
Post #2
http://forum.xda-developers.com/showthread.php?t=1481630
sent using internet explorer, hope it reaches on time :fingers-crossed:
my phone is only nt getting detected in sony pc companion
x8bricked said:
my phone is only nt getting detected in sony pc companion
Click to expand...
Click to collapse
Use flashtool
sent using internet explorer, hope it reaches on time :fingers-crossed:
Gogeta said:
Use flashtool
sent using internet explorer, hope it reaches on time :fingers-crossed:
Click to expand...
Click to collapse
flash tool is aborting with error msg
---------- Post added at 05:21 PM ---------- Previous post was at 05:17 PM ----------
Gogeta said:
Post #2
http://forum.xda-developers.com/showthread.php?t=1481630
i tried it bt still my device is nt properly installed plz help
Click to expand...
Click to collapse