problem occured at bottloader unloking - XPERIA X8 Q&A, Help & Troubleshooting

hi frnds i unlocked bootloader for my w8 device
and flashed nAa kernel from then my stoped at nAa kernel logo but i am able to get into clock work mode
dont knw to get my w8 work
plzz hlp me

Rom? Wiped data?
Sent from my E15i using xda premium

Did you follow the tutorial step?
Should be no problem.

you have no problem with bootloader, your bootloader is being successfuly unlocked.
as long as you can access cwm, full wipe and reinstall the rom, everything should be fine!

chetanchowdary6 said:
hi frnds i unlocked bootloader for my w8 device
and flashed nAa kernel from then my stoped at nAa kernel logo but i am able to get into clock work mode
dont knw to get my w8 work
plzz hlp me
Click to expand...
Click to collapse
yeah,,,
if you still can access cwm, everything will be fine..
musn't flash kernel to downgrade cz u don't have softbrick issue
you can reflash the kernel - backup
factory reset, etc
Flash ROM
done! :laugh:

Related

Flashtool Error :(

so i installed MiniCM7 2.0.9. My old ROM is FroyoBread. i Installed MiniCM7 Without nAa Kernel because when flashing kernel i got error.
For now my device stuck at "sony ericsson" bootscreen.
ive tried SEUS,PCC and no work.
what should i do ?
xRec and CWM cant be open.
Help please thanks.
Did you unlock your bootloader?
Sent from my W8 using xda premium
You must go to flashtool folder/drivers and install ggsetup click thanks button if i helped you
uDroid said:
so i installed MiniCM7 2.0.9. My old ROM is FroyoBread. i Installed MiniCM7 Without nAa Kernel because when flashing kernel i got error.
For now my device stuck at "sony ericsson" bootscreen.
ive tried SEUS,PCC and no work.
what should i do ?
xRec and CWM cant be open.
Help please thanks.
Click to expand...
Click to collapse
If you still see " Sony Ericsson" bootscreen, then you still in stock kernel and have not install the aNa Kernel! MiniCM7 cannot install on stock kernel! you cannot use aNa Kernel, if you have not unlocked your bootloader!
Look at the date of manufacturing carefully, otherwise you may brick your phone! PM if you desperate!
Were you be able to connect to your PC? If so, then Flashtool may help!

ROM flashing problem

hello there...
i have a problem after flashing ROM...
i cant flash any roms other than miui...
tried with minicm, primeHD, mika v3 n xperience 5.0
i'm stuck at kernel..never reach bootanimation...
but if i flash miui rom...then only it boots..
fyi, i'm using alfs-08acm7
Don't forget to do a full wipe! And check the ROMs are they capable of the kernel that you have chosen.
maybe you have to go through a long process...repair through SEUS and the unlock your bootloader again...i hate that process doing again and again....
i think your bootloader is stucked or cracked
androidnerd2 said:
maybe you have to go through a long process...repair through SEUS and the unlock your bootloader again...i hate that process doing again and again....
i think your bootloader is stucked or cracked
Click to expand...
Click to collapse
Reflashing with Seus will not relock the bl, but reflash with seus, maybe something with the kernel
Sent from my X8 running Android 4.0.4 using Tapatalk

[Q]flashing kernel while using custom rom

i have unlocked Bootloaderand i wanna flash nAa kernel while using custom rom.will that work? or flash back to stock kernel first?
need answer as fast as possible
sorry for my bad english
Yeah it will work if the rom supports that kernel.Just wipe the dalvik cache before flashing
Sent from my Worlds using xda premium
Just transfer the nAa ROM into your SD card, flash the nAa kernel and when your phone boots up, open CWM and install the ROM.
i see now... if stuck on SE logo then i'll have to rein stall the rom again?
If You flash nAa kernel there won't be SE logo. It will be nAa logo And don't worry about stuck - there's a built-in recovery in nAa kernel, so even if You forgot to copy compatible ROM to SD card there's always an option to enable USB storage via CWM recovery. But make sure You have backup Your contacts / apps / messages etc before do anything.
oh....i never flashed kernel before...
after i unlocked bootloader then my phone hard bricked and sent to repair for 1 month+
after i get it back i checked whether the bootloader unlocked or not it surprisingly unlocked @@ and i was like
So now go ahead and install kernel and then ROM following the instructions and good luck.
Sent From My W8 Using Tapatalk
just done flashed but still able to boot it fine on gdx rom...not for nAa kernel typed lol...uhhh is ginger xperia no more updates and closed?
anthonyng said:
just done flashed but still able to boot it fine on gdx rom...not for nAa kernel typed lol...uhhh is ginger xperia no more updates and closed?
Click to expand...
Click to collapse
Yes, no more updates.
Sent From My W8 Using Tapatalk
aw...ok...thx for the news

[Q] Afeter unlock bootloader i canĀ“t run any ROM....helP!!!

X8 ....After unlocking bootloader it went out of SIM signal....imanage to solve this problem.
But i have a mayor problem: I`ve tried to install GingerDx, PrimeHD, MiniCM9, on Sock and Custom Kernels and it always stuks at booting.
Before unlocking bootloader stock kernel ROMs were runnig all right, even PrimeHD 7.0 with nAa 11 worked but not anymore.
Anyone knows what is happening, should i relock and unlock it again?
did you fill wipe? you need to flash kernel, install rom and full wipe
fifo171 said:
did you fill wipe? you need to flash kernel, install rom and full wipe
Click to expand...
Click to collapse
Yes...full wipe= Done...but doesn`t work after full wipping.
well are you sure you have unlocked your bootloader?
re-check with s1tool...if it's unlocked then with flashtool go back to stock rom,kernel(android 2.1) and then root it again install recovery and then first try to install some other rom for stock kernel and then install custom kernel and then custom ROM
Pay attention on your ftf kernel files...i accidently downlaoded U20 nAa kernel instead of x8 nAa kernel...and guest what-->that kernel didn't work so whatch out for which phone is ftf kernel file
i hope i helped
8cpaiw said:
well are you sure you have unlocked your bootloader?
re-check with s1tool...if it's unlocked then with flashtool go back to stock rom,kernel(android 2.1) and then root it again install recovery and then first try to install some other rom for stock kernel and then install custom kernel and then custom ROM
Pay attention on your ftf kernel files...i accidently downlaoded U20 nAa kernel instead of x8 nAa kernel...and guest what-->that kernel didn't work so whatch out for which phone is ftf kernel file
i hope i helped
Click to expand...
Click to collapse
Yes, i`ve done this!!!....The same happens to me with U20 nAa kernel....
I`ve donde exactly what you describe above but i still couldn`t install custom Roms.....pretty weird
Flesh phone with seus and do same procedures again
Sent from my E15i using xda premium
yes that pretty weird but try with SEUS/PCC and then re-do the installation of kernel and rom
.....GOOD LUCK man
8cpaiw said:
yes that pretty weird but try with SEUS/PCC and then re-do the installation of kernel and rom
.....GOOD LUCK man
Click to expand...
Click to collapse
I`ve donde this.....i don`t know how.
I will try all again.
which combination of rom and kernel did you try? try nAa kernel (not the ics one) and MiniCM7 rom
can you make a video and show us your problem?
I finally solve it!!!
Idon`t know how but i repeat the same procedure time after time and i can finally instal GingerDx v025 in Stock kernel.
Thanks to everyone that helped me!!!

GingerDX logo is in loop

Just like title says... I install GingerDX 2.3.7 v29 on x8... Everhtying goes fine but when i turned off it stayed on GingerDX logo, couple of times logo is in loop the just freez..
I use kernel 08a-DX alfs, and v08a-cm7 alfs.... both times same...
iPlayboy said:
Just like title says... I install GingerDX 2.3.7 v29 on x8... Everhtying goes fine but when i turned off it stayed on GingerDX logo, couple of times logo is in loop the just freez..
I use kernel 08a-DX alfs, and v08a-cm7 alfs.... both times same...
Click to expand...
Click to collapse
Your phone may have just been softly bricked (bootloop). You didnt install the ROM correctly or it is not compatible with the kernel.
Check the ROM's thread to see, otherwise repair it using Sony Ericsson companion.
Hope it helped
catalinjulia said:
Your phone may have just been softly bricked (bootloop). You didnt install the ROM correctly or it is not compatible with the kernel.
Check the ROM's thread to see, otherwise repair it using Sony Ericsson companion.
Hope it helped
Click to expand...
Click to collapse
I know it is.. And i use SEUS... So which kernel is compatible with GinderDX 2.3.7 v29
iPlayboy said:
I know it is.. And i use SEUS... So which kernel is compatible with GinderDX 2.3.7 v29
Click to expand...
Click to collapse
Look in the Gingerdx thread..
There u will get supported kernels & their respective links
see my app sig at your own risk :
sent from my W8 running on armv7 processor problem??
If u are able to go into the recovery, u can factory reset data and delvik cache and then reboot.
Hope it works for you...:thumbup:
Officially corp via W8 using ixperia
leecorp said:
If u are able to go into the recovery, u can factory reset data and delvik cache and then reboot.
Hope it works for you...:thumbup:
Officially corp via W8 using ixperia
Click to expand...
Click to collapse
do factory reset through CWM and wipe dalvik cache... it should work
Ok thx guys for replays... I will try it..

Categories

Resources