Related
I had ICS Stunner in my Note working properly.
I needed to revert back to stock GB, so I downloaded the stock ROM from here:
http://forum.xda-developers.com/showthread.php?t=1590284
N7000XXLC1-2.3.6-2012 March-N7000CPWLB2--United Kingdom
(my phone is NOT from UK).
After that I followed these steps:
http://forum.xda-developers.com/showthread.php?p=24535533#post24535533
Download AbyssNote 4.2 kernel with redpill touch recovery from here- http://forum.xda-developers.com/show....php?t=1362424 .
Now first put this zip on your SD Card before you try to flash anything or restore anything.
Now boot into recovery - Volume up + Home + Power
Choose - install zip from SD Card
Navigate to your Abyss kernel 4.2 zip and flash it
After flashing is complete- go back to the Recovery start menu
Go to advanced > reboot recovery
This will reboot the phone directly to new recovery - Hyperdroid Redpill Recovery
Now go to Wipe Menu and wipe cache, dalvik and do your factory reset
After this start your restore from nandroid backup , or flash any GB rom !
Click to expand...
Click to collapse
I've done everything up to "After this start your restore from nandroid backup , or flash any GB rom".
When I try to "choose zip from internal card" and choose the beforementioned ROM, I get the message "E:Can't open /emmc/1/GT-N7000..... Installation aborted".
If i try to choose file from external SD card I get "Can't mount /sdcard/".
I've tried flashing Abyssnote 3.9 as per this thread http://forum.xda-developers.com/showthread.php?t=1599229
Still same problem.
Does it have something to do, that the ROM I've downloaded isn't the same as my original ROM? (I mean the letters at the end, like LA4, KL2 and so on. I can't remember my original ones)?
And I don't have any backup.
Can someone help me get back to ANY gingerbread?
Thanks a lot in advance.
Cyrusas said:
I had ICS Stunner in my Note working properly.
I needed to revert back to stock GB, so I downloaded the stock ROM from here:
http://forum.xda-developers.com/showthread.php?t=1590284
N7000XXLC1-2.3.6-2012 March-N7000CPWLB2--United Kingdom
(my phone is NOT from UK).
After that I followed these steps:
http://forum.xda-developers.com/showthread.php?p=24535533#post24535533
I've done everything up to "After this start your restore from nandroid backup , or flash any GB rom".
When I try to "choose zip from internal card" and choose the beforementioned ROM, I get the message "E:Can't open /emmc/1/GT-N7000..... Installation aborted".
If i try to choose file from external SD card I get "Can't mount /sdcard/".
I've tried flashing Abyssnote 3.9 as per this thread http://forum.xda-developers.com/showthread.php?t=1599229
Still same problem.
Does it have something to do, that the ROM I've downloaded isn't the same as my original ROM? (I mean the letters at the end, like LA4, KL2 and so on. I can't remember my original ones)?
And I don't have any backup.
Can someone help me get back to ANY gingerbread?
Thanks a lot in advance.
Click to expand...
Click to collapse
I think you should go back to any stock rootable GB ROM using ODIN. Then flash your custom GB ROM over it and then restore your apps using Titanium Backup or any such tool provided you have used the same to back up your apps.
Go to this thread
http://forum.xda-developers.com/showthread.php?t=1535025
And download any one of the pre rooted GB ROMs and flash it using Odin
The difference in ROM title does not affect flashing
Had the very same problem. At a welknown site a registred and downloaded a original rom. A rooted rom did not worked with my Note. After that i flashed the Rom with pit file completely. And yes, miricaly it worked! My only problem was that i picked a rom which had no rooting available so i had to downgrade. I downgraded with a rooted rom and finaly i was where i left some 5 hours before, but now with a working device!!
I don't know if I can post after this time, (couldn't get my hands on that phone and check out your advice), but now I've tried it and it works perfectly - thanks!
Hi everyone, I'm not a new one here, before I had a lovely Motorola Defy with 4.0.4 CyanogenMod . ( Sorry for my bad English )
Now this change from Motorola to Samsung it's a little bit different .
I'm a little bit worried because before this Note, I had another one and I've hard-bricked it trying to flash RocketRom ( I've made a fullwipe, bad kernel and root with CWM .. Idiot, yes, I know :cyclops: ( stuck at factoryfs .. :cyclops: )
That's the reason why I started this topic because now I want to be sure about everything I do . I DON'T HAVE WARRANTY AND I CAN'T REPLACE IT AGAIN !
So .. what I want ?
1. Root
2. CWM STABLE / Adevanced recovery
3. Kernel Stable ( to be able to full data wipe, factory reset )
4. PARANDROID ROM or ROCKETROM ( Last versions )
5. Maybe a little overclock , maybe . I'm not sure now, deppends how fast will be my Note after another Rom .
Now I should tell you my Note info :
GT-N7000 ( United Kingdom, Carphone Warehouse )
Android Vers 4.0.4 STOCK NOROOT
Baseband Vers N7000XXLRK
Kernel Vers [email protected] #3 SMP PREEMPT Mon Jul 16 20:50:37 KST 2012
Build Number
IMM76D.XXLRK
Someone can explain we every step I need to do before .. I don't want to brick it again !
I've tried to find some info in Dev but too many info and I'm stuck, I really don't know exactly what should I do .
Please help me, thx a lot ! Andrew .
reply
hi
sorry for what happend to your first Note ...
for a safe root/kernel/CWM ,I advise you this kernel
HYDRACORE:
- have the eMMC_erase-safe diseabled ,so it is safe to do wipes
- CWM 6.0.x safe
- root your note will be rooted when you flash this kernel
- work with all rom types (TWstock , AOSP ,AOKP ,CM) so rocketrom and paranoid works on this kernel
- have to versions one O.C at 1600Mhz and a STD version no O.C
- and more features I can't list it ...
you can see all this on the original thread http://forum.xda-developers.com/showthread.php?t=1749863
thanx lord-ralf-adolf
Alright, thank you man , seems to be a good one, but I'm a little bit confused how to do it cuz' I'm coming from STOCK ICS 4.0.4 , no root, no mod, nothing .. I need someone to explain me here ( if someone want ) .. anyway, thank you.
I'm waiting also for another opinion .
EvoEndless said:
Alright, thank you man , seems to be a good one, but I'm a little bit confused how to do it cuz' I'm coming from STOCK ICS 4.0.4 , no root, no mod, nothing .. I need someone to explain me here ( if someone want ) .. anyway, thank you.
I'm waiting also for another opinion .
Click to expand...
Click to collapse
To Root your phone just go here
http://forum.xda-developers.com/showthread.php?t=1329360
after that flash Hydracore kernel from here.
http://forum.xda-developers.com/showthread.php?t=1749863
You will have CWM with safe kernel. Now you can do wipes as much as you want. Nothing to worry. After that flash any rom and start rocking your device.
Alright , thank you so much guys
One more question :
If I want to root , can I use this mod ?
1B.If you want just Root but not kernel, follow this
- Download Root_SuperSu 0.95
-Copy downloaded file to Ext SD card.
-Reboot into recovery (vol up+Home+power)
-Select install zip from ext SD card
-select 'root_SuperSU-*.zip' which you have copied to Ext card above
-Reboot device
-You can see superSU on appl drawer. open it and update.
-Now This will give you only SuperSU not busybox, though application which doesn't depends on system busybox will still works.e.g.Titanium Backup.
-To get full Root+busybox, Download Root_busybox *.zip
-Copy Root_busybox* only to Ext SD card
-Reboot into recovery, Select Install zip from Ext SD card. select Root_busybox* .zip and Flash.
-Done !
And then , flash hydracore , and after that parandroid ? Thx
EvoEndless said:
Alright , thank you so much guys
One more question :
If I want to root , can I use this mod ?
1B.If you want just Root but not kernel, follow this
- Download Root_SuperSu 0.95
-Copy downloaded file to Ext SD card.
-Reboot into recovery (vol up+Home+power)
-Select install zip from ext SD card
-select 'root_SuperSU-*.zip' which you have copied to Ext card above
-Reboot device
-You can see superSU on appl drawer. open it and update.
-Now This will give you only SuperSU not busybox, though application which doesn't depends on system busybox will still works.e.g.Titanium Backup.
-To get full Root+busybox, Download Root_busybox *.zip
-Copy Root_busybox* only to Ext SD card
-Reboot into recovery, Select Install zip from Ext SD card. select Root_busybox* .zip and Flash.
-Done !
And then , flash hydracore , and after that parandroid ? Thx
Click to expand...
Click to collapse
Yes but when you are you rooted your device , you must install Mobile Odin and then Flash HydraCore kernel (to avoid yellow triangle), then you are safe.
My way is little diferent but also safe. If you want, you can folow this steps (no need to root).
You said that you are on xxlrk so i sugest this steps.
First download PhilZ kernel for xxlrk from here (choose right kernel for your xxlrk rom): http://forum.xda-developers.com/showthread.php?t=1901191
Then download a HydraCore kernel from here: http://forum.xda-developers.com/showthread.php?t=1749863
And then download your favorite rom and put it all on your internal sd card.
1. Now go into stock recovery VolUp+home+power. Now you are in stock recovery - Never do wipes in that recovery!!!
2. Flash PhilZ kernel (because you can install this kernel from stock recovery) - select "apply update from external storage", choose PhilZ kernel and wait untill its done. Then reboot your device, wait until its booted up and go again into recovery volup+home+power.
3. Now if you see different recovery (not the black-blue one) you are good. This recovery has a grey background, and that is a CWM6 on a safe kernel. You are safe to do all the wipes but there is no need to do it now, yust folow next steps.
- Note: I sugested these first three steps because you dont need root and dont need use mobile odin or PC odin. Maybe it sounds complicated but it isnt.
4. Now when you are in recovery and seeing diferent new CWM6 from step 3. You can flash HydraCore kernel (install zip from sd card)... and wait for message installing hydracore kernel is complete.
5. Go in advance and reboot recovery. Now there is no difference in recovery but you are now on HydraCore kernel. From that point you are safe to do all wipes and flash any rom you want (PhilZ kernel is only for TW roms, also safe to do all wipes)
6. To be sure that you are on HydraCore kernel you can reboot your device and go into settings > about and check that you are on HydraCore.
7. Go into recovery again , do all three wipes(cache, data and dalvik cache) and you are ready to flash your new rom. Just to make sure, read installig instruction in OP of rom you want to flash!
From now on, when you want to flash a new rom, always check on which kernel you are. My advice is when you want to flash for example Paranoid from RocketRom yust make sure you are on HydraCore kernel (if you are not, first flash Hydracore) and then flash your new rom. HydraCore kernels made flashing easier because it is one kernel for all roms.
Dont forget hit thanks button to all devs that make your flashing experience easier
Hope that helps!
If you want, you can wait untill someone confirm that my steps is right. Or someone has better suggestion. Untill that, search forum, and read, there is a lot of similar question.
But dont worry, i flashed it that way, from stock TW 4.0.4. and never had a problem :good:
Thank you man, so much . I'm done . I've installed hydracore ( checked in about phone ) .
But now I want to ask something :
- For RocketRom v11 ( http://forum.xda-developers.com/showthread.php?t=1654838 )
following this steps :
a) coming from a rooted GB-ROM:
- download Abyss Kernel 4.2 from here: http://www.mediafire.com/?c65mndvpk6ocbaa
- put zip-file on your USB-storage
- boot in Recovery
- Flash Abyss Kernel 4.2!!!
- boot back in recovery!!! (you find this option under 'advanced')
- FullWipe
- Flash ROM
- reboot system
- ...you are done
I really need to Flash Abyss Kernel 4.2 ? Because now I've Hydracore v5.4.
- For Parandroid , which one :
(1) http://forum.xda-developers.com/showthread.php?t=1797698
(2) http://forum.xda-developers.com/showthread.php?t=1654838
What means that cuz I don't understand very clear " Make sure to run CM9 or an AOSP-based ROM : FLASHING FROM STOCK ICS OR ROMS BASED ON STOCK ICS WILL RESULT IN A BRICK! " . I'm safe to continue with hydracore v5.4 ?
Thank you and sorry for stress with me
reply
EvoEndless said:
Alright , thank you so much guys
One more question :
If I want to root , can I use this mod ?
1B.If you want just Root but not kernel, follow this
- Download Root_SuperSu 0.95
-Copy downloaded file to Ext SD card.
-Reboot into recovery (vol up+Home+power)
-Select install zip from ext SD card
-select 'root_SuperSU-*.zip' which you have copied to Ext card above
-Reboot device
-You can see superSU on appl drawer. open it and update.
-Now This will give you only SuperSU not busybox, though application which doesn't depends on system busybox will still works.e.g.Titanium Backup.
-To get full Root+busybox, Download Root_busybox *.zip
-Copy Root_busybox* only to Ext SD card
-Reboot into recovery, Select Install zip from Ext SD card. select Root_busybox* .zip and Flash.
-Done !
And then , flash hydracore , and after that parandroid ? Thx
Click to expand...
Click to collapse
EvoEndless said:
Alright, thank you man , seems to be a good one, but I'm a little bit confused how to do it cuz' I'm coming from STOCK ICS 4.0.4 , no root, no mod, nothing .. I need someone to explain me here ( if someone want ) .. anyway, thank you.
I'm waiting also for another opinion .
Click to expand...
Click to collapse
to root just flash the hydracore kernel via odin pc ,then delete the yelow triangle by using "triangle away - use the search bouton ). it is the safest way
EvoEndless said:
Thank you man, so much . I'm done . I've installed hydracore ( checked in about phone ) .
But now I want to ask something :
- For RocketRom v11 ( http://forum.xda-developers.com/showthread.php?t=1654838 )
following this steps :
a) coming from a rooted GB-ROM:
- download Abyss Kernel 4.2 from here: http://www.mediafire.com/?c65mndvpk6ocbaa
- put zip-file on your USB-storage
- boot in Recovery
- Flash Abyss Kernel 4.2!!!
- boot back in recovery!!! (you find this option under 'advanced')
- FullWipe
- Flash ROM
- reboot system
- ...you are done
I really need to Flash Abyss Kernel 4.2 ? Because now I've Hydracore v5.4.
- For Parandroid , which one :
(1) http://forum.xda-developers.com/showthread.php?t=1797698
(2) http://forum.xda-developers.com/showthread.php?t=1654838
What means that cuz I don't understand very clear " Make sure to run CM9 or an AOSP-based ROM : FLASHING FROM STOCK ICS OR ROMS BASED ON STOCK ICS WILL RESULT IN A BRICK! " . I'm safe to continue with hydracore v5.4 ?
Thank you and sorry for stress with me
Click to expand...
Click to collapse
Flashing abyss on advise by rocketrom, is for u to be on safe kernel to do full wipe before flashing the Rom.Can
But.. U r on hydracore, mate.
No need to flash abyss alrd, hydra is safe to full wipe.
Sent from my GT-N7000 at the corner of this rounded earth.
Ok now you are on stock xxlrk with HydraCore.
From that point if you want try RocketRom:
1. Reboot recovery (VolUp+Home+Power)
2. You are now in new shiny CWM6 recovery (with grey background, if not, something is wrong dont do wipes, but i assume everything is ok, just a safety check)
3. Now you are safe to do all three wipes (wipe cache,data and dalvik cache)
4. "Install zip from SD card" choose rocket rom, select install
5. Sit back, relax and enjoy
Now you are on rocketrom. Rocketrom also came with hydracore kernel, so if you want try paranoid you are safe to flash. Just check in about phone, that you are on safe kernel (safety check).
Installing procedure is almost the same. I have never installed paranoid, but installed some others CM10 based roms,so i will just copy/paste installiing instructions from OP.
1. You are on hydracore? yes. Now reboot recovery.
2. Full wipe (cache, data, dalvik cache)
3. Install Rom
4. Install possible bug fixes (look out for "FIX" or "BUGFIX" prefixes and make sure the build number matches your rom)
5. Install GApps
6. Wipe cache / dalvik cache
7. Reboot
8. Enjoy
Thank you guys, almost done ! I'm so happy now !
hi,
I'm in the same situation that EvoEndless, and i think i will try to flash hydracore and a new rom tonight, after searching and reading for about 3 weeks. (confusing ><' )
I think i've understood how i will proceed but i'm not sure about the rom i want to flash.
(this ROM)
I think it's OK but in the rom's thread, it's said :
Based on Latest FW N7000XXLRQ, Phone: DDLR1, CSC: N7000DBTLRQ
Click to expand...
Click to collapse
and i'm on LRK (the phone line when u type *#1234#) and LRT (the CSC and PDA lines when u type *#1234#)
i'm affraid about what could happen, don't want to brick, please help
(sorry for bad english :/)
You gave link of ClasssicRom V6, and it is based on latest indian DDLR9. (you are on xxlrt that is a germany latest version, a ddlr9 is indian latest version of ics 4.0.4)
ClassicRom v5 is based on XXLRQ.
If you want to flash a V6, it is ok, i think that is a very good rom.
Just make sure that you are on safe kernel before flashing, like hydracore. And reading installing instructions in OP.
djoni_gitara said:
You gave link of ClasssicRom V6, and it is based on latest indian DDLR9. (you are on xxlrt that is a germany latest version, a ddlr9 is indian latest version of ics 4.0.4)
ClassicRom v5 is based on XXLRQ.
If you want to flash a V6, it is ok, i think that is a very good rom.
Click to expand...
Click to collapse
Do u mean this ROM is not compatible with my device (it's not clear in my head, very sorry ^^') and it's mandatory to use a V5?
djoni_gitara said:
Just make sure that you are on safe kernel before flashing, like hydracore. And reading installing instructions in OP.
Click to expand...
Click to collapse
Yep, the first step will be to flash the hydracore kernel by folowing this post :
sahilarora2003 said:
To Root your phone just go here
http://forum.xda-developers.com/showthread.php?t=1329360
after that flash Hydracore kernel from here.
http://forum.xda-developers.com/showthread.php?t=1749863
You will have CWM with safe kernel. Now you can do wipes as much as you want. Nothing to worry. After that flash any rom and start rocking your device.
Click to expand...
Click to collapse
And then flash the rom after full wipe
Lokidroïd said:
Do u mean this ROM is not compatible with my device (it's not clear in my head, very sorry ^^') and it's mandatory to use a V5?
Yep, the first step will be to flash the hydracore kernel by folowing this post :
And then flash the rom after full wipe
Click to expand...
Click to collapse
This ROM is compatible with your device. You can flash it :good: (It is hard for me to explain why but it is all ok) They are all for international N7000, no need to worry
Yes you can follow sahilarora2003 post. Also you can follow my posts in this thread, you can flash hydracore kernel in few ways. choose the way you want.
If you want the other easiest way to flash ClassicV6 from stock XXLRT I recomend the following:
1. Download a PhilZ kernel for XXLRT (if you are on stock XXLRT) from: http://forum.xda-developers.com/showthread.php?p=31914226#post31914226
Put it on your internal SD card
2. Now you can flash PhillZ kernel from stock recovery (never do wipe here in stock recovery!).
Going in stock recovery by pressing Volup+home+power, when you boot up in recovery choose "update from sd card", choose PhilZ kernel and install it
4. now choose "Reboot your device"
5. Now go again in recovery (volup+home+power). You will see a different new shiny CWM6 recovery, if you dont see it, something is wrong (dont do wipe)
If you see a new recovery you are safe to do three wipes(cache, data and dalvik cache)
6. Now "install from zip card" choose ClassicV6 , and thats it!
7. Enjoy
I recomend a PhilZ kernel because you dont need to root to flash it, and you can flash it from stock recovery and it is brickbug free
You can flash HydraCore after you flash ClassicRomV6 because this rom came with Speedmod kernel, which is also good and safe for wiping. Because if you flash it before, Classicrom will flash his kernel which is Speedmod k3-13 kernel. So you will be on Speedmod.
I hope that I did not confuse you more
djoni_gitara said:
I hope that I did not confuse you more
Click to expand...
Click to collapse
You couldn't be more clear! :good: (thnks button hit) :laugh:
i'll try this in a few minutes and i'll post feedback
PS : last question, do i have to plug my device to the PC during all flashes? or no need to this?
Lokidroïd said:
PS : last question, do i have to plug my device to the PC during all flashes? or no need to this?
Click to expand...
Click to collapse
NO!!
Just download all neccesary files to your device on internal SD card (kernel and rom). Thats the only reason why you would plug it to the PC. Then unplug it and follow the steps..
P.S. Just make sure that your battery is charged over 70% (in case that something goes wrong)
mhhh
i was about to DL the PhilZ kernel and i don't know which one i should use : lrt or lrk
i said that because when i go into menus, there are LRT and LRK and i don't want to make any mistake
Lokidroïd said:
i'm on LRK (the phone line when u type *#1234#) and LRT (the CSC and PDA lines when u type *#1234#)
Click to expand...
Click to collapse
here is a screenshot to be sure to do no error :silly:
So? LRT or LRK?
Hi mate, in my case, I didn't type any code to find out info. I just go to settings > About Phone > Baseband Version ( In my case was N7000XXLRK UK ) . This is your sure baseband version .
Follow #6 , Flash PhilZ kernel from stock recovery It's easier than the ODIN PC way . Be sure if you flashed done ( " This recovery has a grey background, and that is a CWM6 on a safe kernel. " ) .. After that , flash Hydracore . ( To be sure if you flashed done, check again settings > About Phone > Kernel Version , and if you see hydracore there, You're fully safe now. Can do any wipe )
Just follow the steps from #6 and chose the right version of PhilZ kernel for your phone.
sorry, i was busy today...
I cant see atachments...
Ok, PDA is what you are looking for. You need a kernel for PDA ok?
Phone is modem (baseband version)
csc is country sales code
So i assume that you have (when you type *#1234#)
PDA N7000XXLRT
PHONE N7000XXLRK
CSC N7000XXLRT
If it is correct you need to download XXLRT kernel
here: http://www.mediafire.com/?ucu9fzcfpe8b6je
---------- Post added at 09:07 PM ---------- Previous post was at 09:01 PM ----------
EvoEndless said:
Hi mate, in my case, I didn't type any code to find out info. I just go to settings > About Phone > Baseband Version ( In my case was N7000XXLRK UK ) . This is your sure baseband version .
Click to expand...
Click to collapse
No, no!
Baseband version is modem! (or phone), that is not important rihgt now
If you are look in settings> about phone> Build number (for ex. IMM76D.XXLRT)
Then he need XXLRT kernel!
EDIT: ok i see attachement now (my internet connection is poor, not at home now). It is ok download from link that i gave you XXLRT
Hello. I'm going to install the new android into I9000. In the previous thread you recommend me the Semaphore kernel and Jelly Bean ROMs.
I installed the Semaphore from this topic: http://forum.xda-developers.com/showthread.php?t=1786220 by odin and I need to install zip file with my new ROM by clockworkmod recovery. I tried to install three types of ROMs: cyanogenmod10, c-rom, tsunami, however everyone shows 'error [path to file] (status 0) - installation aborted' when the installation starts.
What am I doing wrong?
przemek211 said:
Hello. I'm going to install the new android into I9000. In the previous thread you recommend me the Semaphore kernel and Jelly Bean ROMs.
I installed the Semaphore from this topic: http://forum.xda-developers.com/showthread.php?t=1786220 by odin and I need to install zip file with my new ROM by clockworkmod recovery. I tried to install three types of ROMs: cyanogenmod10, c-rom, tsunami, however everyone shows 'error [path to file] (status 0) - installation aborted' when the installation starts.
What am I doing wrong?
Click to expand...
Click to collapse
Status 0 is due to having wrong CWM on you phone, likely you are on ICS ROM and using JB kernel and trying to Flash JB ROM
thanks for your answer,
i'm using semaphore JB 2.3.0 Kernel (URL in first post) - the author writes:
This is a kernel based on the pawitp's one and it works for Android 4.1.1 JB ROMs.
This version works for Jelly Bean ROMs
Click to expand...
Click to collapse
I want to install this: [NIGHTLY][ROM][4.1.1] CyanogenMod 10
So could you recommend me other kernel + ROM? Why it happens if i have JB kernel and JB rom?
przemek211 said:
thanks for your answer,
i'm using semaphore JB 2.3.0 Kernel (URL in first post) - the author writes:
I want to install this: [NIGHTLY][ROM][4.1.1] CyanogenMod 10
So could you recommend me other kernel + ROM? Why it happens if i have JB kernel and JB rom?
Click to expand...
Click to collapse
Which date on nightly you trying to install
Sent from my GT-I9000 using xda premium
thanks for so fast answer
I tried the newest version 'experimental' (10/8) and next one "nightly" (10/3), but it looks that the problem are not in ROMs. I tried c-rom, tsunami and there is the same problem.
przemek211 said:
thanks for your answer,
i'm using semaphore JB 2.3.0 Kernel (URL in first post) - the author writes:
I want to install this: [NIGHTLY][ROM][4.1.1] CyanogenMod 10
So could you recommend me other kernel + ROM? Why it happens if i have JB kernel and JB rom?
Click to expand...
Click to collapse
yes kernel will work but CWM does not, so flash the ICS kernel to solve your problem , you are currently on ICS, so use ICS kernel and upgrade to JB, once in JB , use JB kernel
sorry, but i don't understand. i should install the ics kernel, e.g. from here: http://www.semaphore.gr/downloads/gt-i9000-ics and next i need to install JB kernel from sdcard in cwm of ics?
przemek211 said:
sorry, but i don't understand. i should install the ics kernel, e.g. from here: http://www.semaphore.gr/downloads/gt-i9000-ics and next i need to install JB kernel from sdcard in cwm of ics?
Click to expand...
Click to collapse
One you have an ICS kernel, your CWM will be able to Flash a JB ROM in recovery, once you have a working JB ROM, its up to you , IF you would like to have JB Kernel , just Flash that
thank you @xsenam
now i have JB ROM and JB Kernel.
Everything works, but in GB i had the Semaphore settings and now i didn't see that, only Superuser. Should it be in the apps?
przemek211 said:
thank you @xsenam
now i have JB ROM and JB Kernel.
Everything works, but in GB i had the Semaphore settings and now i didn't see that, only Superuser. Should it be in the apps?
Click to expand...
Click to collapse
use Semaphore kernel manager for JB http://forum.xda-developers.com/showthread.php?t=1886686
Ok, so again: thank you and sorry for my mistake in your nick @xsenman
Greetings from Poland for Republika ng Pilipinas
sadly i have one more issue, i've inserted my sim card and the phone shows: mobile network not available, when i'm going to search mobile networks it shows: 'error while searching for networks'. I tried to ON&OFF aeroplane mode (as i read in google), but it doesn't help.
przemek211 said:
sadly i have one more issue, i've inserted my sim card and the phone shows: mobile network not available, when i'm going to search mobile networks it shows: 'error while searching for networks'. I tried to ON&OFF aeroplane mode (as i read in google), but it doesn't help.
Click to expand...
Click to collapse
just check if you still have your IMEI, if not use a solution from My Android Solutions to fix it
BUT make sure you inserted your sim card in the correct direction
No i don't have an IMEI (checked by *#06# code, shows only "IMEI" without the number). So, if i didn't make a backup i need to flash an old ROM, go to CWM and make a wipe, delete EFS folder with root explorer and install the ICS kernel with Phone EFS Clear ticked?
I have next problem. My i9000 resets byself and goes to CWM. He made it for three times when i didn't use him.
przemek211 said:
No i don't have an IMEI (checked by *#06# code, shows only "IMEI" without the number). So, if i didn't make a backup i need to flash an old ROM, go to CWM and make a wipe, delete EFS folder with root explorer and install the ICS kernel with Phone EFS Clear ticked?
I have next problem. My i9000 resets byself and goes to CWM. He made it for three times when i didn't use him.
Click to expand...
Click to collapse
NO, all you need to do is , was written in above link
1) Download Root Explorer from Play Store and use it to
2) Search you internal SD card for sdcard/backup/efs
3) Copy nv_data.bin, nv_data.bin.md5 and nv.log paste them into /efs in your Phone memory
4) Reboot to get back your original IMEI
or
you can start from the beginning.. go back to GB 2.36 (use a JVU ROM + Root, upgrade to ICS CM 9 and than to CM10
First of all I installed twrp 2.2 and I felt into bootloop so I flashed Bootloader.tar and now my phone is working good;but I have a question ;If I go into recovery mode next time I will be in bootloop again and I must flash bootloader again?!
Sorry for my bad English!
alireza7991 said:
First of all I installed twrp 2.2 and I felt into bootloop so I flashed Bootloader.tar and now my phone is working good;but I have a question ;If I go into recovery mode next time I will be in bootloop again and I must flash bootloader again?!
Sorry for my bad English!
Click to expand...
Click to collapse
you can flash a CWM 6.0 or TWRP 6.0 to recover , IF your current TWRP is bad ,
xsenman said:
2) Search you internal SD card for sdcard/backup/efs
Click to expand...
Click to collapse
I don't have this backup folder
przemek211 said:
Hello. I'm going to install the new android into I9000. In the previous thread you recommend me the Semaphore kernel and Jelly Bean ROMs.
I installed the Semaphore from this topic: http://forum.xda-developers.com/showthread.php?t=1786220 by odin and I need to install zip file with my new ROM by clockworkmod recovery. I tried to install three types of ROMs: cyanogenmod10, c-rom, tsunami, however everyone shows 'error [path to file] (status 0) - installation aborted' when the installation starts.
What am I doing wrong?
Click to expand...
Click to collapse
if you have cwm(any version)
you can install whatever rom you have
if you are on other bases like GB or ICS and trying to install JB or new versions of cm10
you should do the installing process three times
there will be an error after first try and on the second it will install but you will get bootloop and you have to take out battery put it back and boot to recovery with three button combo and start the third time of install process after that do a restart and you are done
good luck :good:
thanks for your reply, but I solve that problem with @xsenman help. Now I have issue with mobile network.
@xsenman: i understand that i need to install old rom from your post and just make upgrade to ics? Or should I make any other steps in this tutorial?
Hi all,
I know similar questions have been asked literally hundred times, but as a complete noob to roms, I want to make sure that I get a full set of instructions and then I won't brick my phone. I want to upgrade my note to this JB Rom by cronosmachine. I'm on stock ICS 4.0.4. Never rooted or did modding to the phone. No kernel change (which I know nothing about), nothing.
I'm not sure how much info you guys will need but here are the basics:
Baseband version: N7000XXLRB
Kernel version: 3.0. 15-1115729
[email protected] #3
SMP PREEMPT Thu Sep 20 00:40:29 KST 2012
Build number: IMM76D.ZSLPN
I know that I have to first root my phone to get CWM? My guess is to follow method 1 on [24sept12]How to Root/Unroot Samsung Galaxy Note + CWM?
And then from there I don't know what to do in order to get the ROM onto my phone.
And is there anything else I need to be aware of?
Appreciate any kind of help.
yes first root usin 1a method using philz kernel.
Once done, you will have root and cwm and is a safe kernel.
Download the zip file of the rom you want to flash and place it on internal or external sd card.
boot into recovery now (vol up +power+home)
go to mounts and storage
format/system
format/data
format/cache
go to advanced
wipe dalvik cache
go back
install zip.
point to the rom you downloaded.. and wait for it to install. that's all. see your phone booting into jb.
hope that was clear enough
nokiamodeln91 said:
yes first root usin 1a method using philz kernel.
Once done, you will have root and cwm and is a safe kernel.
Download the zip file of the rom you want to flash and place it on internal or external sd card.
boot into recovery now (vol up +power+home)
go to mounts and storage
format/system
format/data
format/cache
go to advanced
wipe dalvik cache
go back
install zip.
point to the rom you downloaded.. and wait for it to install. that's all. see your phone booting into jb.
hope that was clear enough
Click to expand...
Click to collapse
On Phils' post where I can download the rooted kernel, I don't see XXLRB (my baseband version), but I do see a ZSLPN (my build number). Is the ZSLPN the one i'm supposed to download?
rcheung28 said:
On Phils' post where I can download the rooted kernel, I don't see XXLRB (my baseband version), but I do see a ZSLPN (my build number). Is the ZSLPN the one i'm supposed to download?
Click to expand...
Click to collapse
Yes, bas band refers to the modem, Build Number is rom.
Sent from my GT-N7000 using xda premium
Thanks SpyderTracks.
One more question before I pull the trigger, can all this be done with the "internal" SD card? Or does it have to be an external SD?
stock recovery doesnot allow installation from internal SD. so external is required. but you can use PC odin to install it, but it will leave a yellow triangle and increase the counter. later you can use triangle away app to reset it, Final call is yours.,
So after I installed philz's root and safe kernel, I went into recovery to wipe data cache system, went also wiped dalvik. Then I went to the main menu, chose install zip, tried to select choose zip from sdcard, but it keeps giving me this error: E:Can't mount /sdcard/
Nevermind, I managed to install from internal SD. But I'm not liking the ROM that much, so I plan on flashing CM10 Nightly to try it out.
On the CM10 thread, it says that I shouldn't be on a ROM based on stock. What I want to do is to flash CM9. But in order to do that, I'm not sure if I'm already on a safe kernel (after rooting using dr.ketan's 1a method (Phil's)).
what rom are you on now?
nokiamodeln91 said:
what rom are you on now?
Click to expand...
Click to collapse
I'm on this rom, it's a tw based rom based on the leaked jb ls7?
I am not sure what kernel it has. boot into recovery and check what you see.. If it's philz the you can just flash the cm10 on it. else. install philz xxls7
nokiamodeln91 said:
I am not sure what kernel it has. boot into recovery and check what you see.. If it's philz the you can just flash the cm10 on it. else. install philz xxls7
Click to expand...
Click to collapse
I'm not sure either, I booted into recovery, went into Philz Settings > about, and got CWM base 6.0.1.5, and PhilZ Touch 3.00 (n7000).
And what you're saying is that if I'm on Philz xxls7 kernel, I can go right to flashing CM10, without worrying the "do not flash on stock based ICS fw" (even though I'm on jb)?
Yes.. you are on philz kernel and you can directly install CM10
nokiamodeln91 said:
Yes.. you are on philz kernel and you can directly install CM10
Click to expand...
Click to collapse
Thanks for the information. But I want to know what makes my case an exception from
- Make sure to run CM9 or an AOSP-based ROM : FLASHING FROM STOCK ICS OR ROMS BASED ON STOCK ICS WILL RESULT IN A BRICK! - You're warned!
Click to expand...
Click to collapse
.
I'm on a JB rom but it's based on stock, isn't that essentially the same as based on stock ICS?
the warning was when the safe ics kernels were not in effect.
nokiamodeln91 said:
the warning was when the safe ics kernels were not in effect.
Click to expand...
Click to collapse
Thanks for the quick reply!! When I get home, I'll try this out!
So what I need to do is
put the zip files onto my SD,
reboot into recovery,
install the rom,
install google apps,
wipe data,
factory reset,
reboot into cm10
I don't need to wipe system/cache/dalvik??
once in recovery
mounts & storage
format/system & data & cache
then install rom & gapps
nokiamodeln91 said:
once in recovery
mounts & storage
format/system & data & cache
then install rom & gapps
Click to expand...
Click to collapse
Thanks a lot for guiding me through this, everything worked out perfectly!
great. now enjoy the cm10..:thumbup::thumbup::thumbup:
How come even after I performed format system cache data dalvik, some of the settings are still left on the phone? e.g. previously saved wireless networks, wallpapers... How can I completely start from scratch?
I have galaxy note stock ics (only rooted)
I want to flash this rom:
http://forum.xda-developers.com/showthread.php?t=2023550
Please guide me step by step to install this.I don't want to brick my phone.
and I don't have any custom recovery.
thanks in advance.
1.Flash a safe kernel.
Download anyone of safe philz kernel from here Flash anyone of safe philz kernel from here....http://forum.xda-developers.com/showthread.php?t=1901191 and flash via stock recovery. This will give you Safe kernel + CWM
2. Follow OP of given link.
optional:full wipe: go to philz setting select clean to flash new rom (this will do a full wipe or u can do it manually)
there are so many kernels to choose from.
I don't know which one to choose.
umair42 said:
there are so many kernels to choose from.
I don't know which one to choose.
Click to expand...
Click to collapse
flash kernel according to your rom
check this of your device
baseband version
kernel version
build number
or u can flash this http://www.mediafire.com/download.php?3cnf2ax9apsebef
After flashing this,what i have to do?
Just put rom in sd card and flash?
I am new to samsung mobiles and i don't know anything about flashing for samsung.
After flashing this,how do i enter the recovery?
umair42 said:
After flashing this,what i have to do?
Just put rom in sd card and flash?
I am new to samsung mobiles and i don't know anything about flashing for samsung.
After flashing this,how do i enter the recovery?
Click to expand...
Click to collapse
ok full tutorial
1. put [kernel].zip & [rom].zip on your ex sd card
2.switch off phone
3.press vol up+home+power [this will boot you to stock recovery]
4.Select "apply update from external storage"
5. select [kernel].zip
6.reboot recovery[go to advanced>reboot recovery] [now u will boot in CWM]
[optional] : do a backup
7.full wipe: philz setting>clean to flash new rom
8.select install zip>[rom].zip
9.Wait
10.Done
Warning: Do it on your own risk. I always follow this steps before flashing new rom no problem so far.
If you have any doubts feel free to ask before proceeding.
I have 4gb card.What is the backup size?
umair42 said:
I have 4gb card.What is the backup size?
Click to expand...
Click to collapse
it will depend upon what apps u have installed.
normally it would be around 1 - 1.5 GB but if u have installed bigger apps like games it will gradually increase.
Warning: Never do a factory reset or any kind of wipes while you are in Stock ICS 4.0.4 kernel.