phone does not power on ....booting - LG Optimus 2x

Hi
I was on the ICS Bootloader and was running the Pengus CM 10 Rom. Now my phone is not powering on / boot and not responding to smartflash also. Nvflash detect the APX Device and tried to go back to different ROM / Bootloader, even tried [TOOL] Full Brick Repair (Clean & Easy) by RomSlammer. But all process ends up same...first it downloads the bootloader and after that nothing happens....it stucks at " waiting for bootloader to initialize" ...screenshot attached ...
I don't know what to now...pls help ...

asifur said:
Hi
I was on the ICS Bootloader and was running the Pengus CM 10 Rom. Now my phone is not powering on / boot and not responding to smartflash also. Nvflash detect the APX Device and tried to go back to different ROM / Bootloader, even tried [TOOL] Full Brick Repair (Clean & Easy) by RomSlammer. But all process ends up same...first it downloads the bootloader and after that nothing happens....it stucks at " waiting for bootloader to initialize" ...screenshot attached ...
I don't know what to now...pls help ...
Click to expand...
Click to collapse
have you installed the nv flash drivers?

noob424 said:
have you installed the nv flash drivers?
Click to expand...
Click to collapse
yes, nv flash drivers were always there, my device recognized as APX. the phone displays nothing, not even the LG logo.

asifur said:
yes, nv flash drivers were always there, my device recognized as APX. the phone displays nothing, not even the LG logo.
Click to expand...
Click to collapse
What happened with the phone? Have you tried any new thing (kernel, bootloader etc)? Or it just powered off itself? Don't you drobbed the phone (maybe into water etc)?
Sorry for the dumb questions but we should now how things went bad before we recommend a solution.
Sent from my LG-P990 using xda app-developers app

paleee said:
What happened with the phone? Have you tried any new thing (kernel, bootloader etc)? Or it just powered off itself? Don't you drobbed the phone (maybe into water etc)?
Sorry for the dumb questions but we should now how things went bad before we recommend a solution.
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
I was running pungus cm 10 rom in ICS bootloader, the night before the inident(when my phone does not power on../boot ) i flashed the MIUI 4 3.1.11 on ICS Bootloader by rugglez, played with it for few hours....but didnt like the speed and stebility of the rom...then tried to flash..JellyBam 4.1.0 by iGio90 ...but installation got aborted (reason 7 ...i guss), then I flashed back to Pengus CM 10 rom on ICS bootloader. the phone had a clean installation....i installed all my apps and synced the phone......all ready....in the morning I received one phone call too...then i went to sleep ...when i woke up ...found the phone hanged at the start of the camera app with screen bricked...i thought the phone somehow got activated with lockscreen camera shortcut and froze there for some reason.....I pulled out the battery ...and after putting the battery again ...i CAN'T TURN ON my phone.......and when i try to nvflash the phone ..it stucks at "waiting for bootloader to initialize" ...i tried different cables/ usb ports in my laptp and even changed laptop also...but same problem. Just don't understand what went wrong.
**ps, the phone was NOT heated when i found it freezed.
I hope i have explained my situation...thanks for hearing me out.

Even if you have tried I would suggest that you should use the all in one tool kit.....the amazing tool by my friend spyrosk...
Just try it one more time....with another usb port and or cable.don't forget to charge the battery too
O2X with Magical ICS ROM and supersonic kernels from my buddies

SREEPRAJAY said:
Even if you have tried I would suggest that you should use the all in one tool kit.....the amazing tool by my friend spyrosk...
Just try it one more time....with another usb port and or cable.don't forget to charge the battery too
O2X with Magical ICS ROM and supersonic kernels from my buddies
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2020737
a link for that

Related

[Q] Is my note superbricked?

Hi,
Tried to install Kingdroid 1.5 yesterday. since than I'm trying to fix my note with no success.
This is what I tried to do:
http://forum.xda-developers.com/showthread.php?t=1652831
I failed to do the following step:
-We went into recovery and install this kernel without leaving the recovery going to advanced and reboot in recovery
And the rom was not installed successfully.
because of panic, tried to restore my device to stock ICS from a previous backup - failed.
Tried another backup of GB - Failed.
Tried ODIN for Stock ICS and succeeded.
After success on this, tried restoring again to my previous backup, and since than I'm stuck on " factoryfs.img"
Tried Abd, but my device was not recognized on 3 Win machines and 1 linux box.
I have download mode available, and also recovery mode.
Currently, I'm bricked, thinking to take it to the shop I bought it at...
Any other Ideas?
Thanks a lot!
asafki said:
Hi,
Tried to install Kingdroid 1.5 yesterday. since than I'm trying to fix my note with no success.
This is what I tried to do:
http://forum.xda-developers.com/showthread.php?t=1652831
I failed to do the following step:
-We went into recovery and install this kernel without leaving the recovery going to advanced and reboot in recovery
And the rom was not installed successfully.
because of panic, tried to restore my device to stock ICS from a previous backup - failed.
Tried another backup of GB - Failed.
Tried ODIN for Stock ICS and succeeded.
After success on this, tried restoring again to my previous backup, and since than I'm stuck on " factoryfs.img"
Tried Abd, but my device was not recognized on 3 Win machines and 1 linux box.
I have download mode available, and also recovery mode.
Currently, I'm bricked, thinking to take it to the shop I bought it at...
Any other Ideas?
Thanks a lot!
Click to expand...
Click to collapse
If you have download mode available, then you're not bricked, only soft-bricked perhaps.
Try flashing again with Odin...
From my knowledge, superbricks occur when wiping on an unsafe ICS kernel, such as old i9220 leak repack, LPY...
eug3n91 said:
If you have download mode available, then you're not bricked, only soft-bricked perhaps.
Try flashing again with Odin...
From my knowledge, superbricks occur when wiping on an unsafe ICS kernel, such as old i9220 leak repack, LPY...
Click to expand...
Click to collapse
in fact all ics kernel will have chances of superbricks, since he trying to restore....which wipe data will take place... that is superbrick i think
whitepandaaa said:
in fact all ics kernel will have chances of superbricks, since he trying to restore....which wipe data will take place... that is superbrick i think
Click to expand...
Click to collapse
CM9 kernels, based on i9100 update 4 are safe. That makes official Cyanogen Mod 9 Nightlies and ROMs like Asylum and ParanoidAndroid safe
From his post I got that he was able to flash official ICS with Odin once, meaning it didn't get stuck at factory.fs...so...might be still hope
From what I get, we should add another one to the long list of hard bricks.
Sent from my GT-N7000 using XDA
If you are stuck on NAND write, factoryfs.img you are super bricked. Sorry......
I'm guessing you tried restoring your backup in CWM??
My Galaxy note is stuck on black screen no response from buttons just black screen.
This was after I did a wipe data and installed CM9 rom.
What options do I have, will one of these jtag dongles help me?
I just saw some ebay sellers offering an unbrick service for about £21 (im in the uk) where you post it to them to fix.
Any help appreciated
aquanuke said:
My Galaxy note is stuck on black screen no response from buttons just black screen.
This was after I did a wipe data and installed CM9 rom.
What options do I have, will one of these jtag dongles help me?
I just saw some ebay sellers offering an unbrick service for about £21 (im in the uk) where you post it to them to fix.
Any help appreciated
Click to expand...
Click to collapse
I think you have SOD.Its a known issue with cm9 to have SOD's.Sorry to ask this silly question,did you try to pull out the battery and boot he phone???
What is SOD ?
Yes pulled the battery, but cant get anything from phone. Even if I put it on charge nothing.. just a black screen
aquanuke said:
What is SOD ?
Yes pulled the battery, but cant get anything from phone. Even if I put it on charge nothing.. just a black screen
Click to expand...
Click to collapse
SOD is screen of death.Its nothing but when deep sleep the phone doesnt wake up again and needs to be restarted.
try to put the phone in download mode though the screen is not seen and connect it to odin and see if it gets detected.
Tried to put it in download not mode but buttons are not responding, nothing when I connect to pc either
aquanuke said:
This was after I did a wipe data and installed CM9 rom.
Click to expand...
Click to collapse
What Rom were you on prior to flashing CM9?
chasmodo said:
What Rom were you on prior to flashing CM9?
Click to expand...
Click to collapse
KingDroid_ICS_NoteMania_Edition_v1.6
aquanuke said:
KingDroid_ICS_NoteMania_Edition_v1.6
Click to expand...
Click to collapse
Ah that means you didnt read the guide correctly.It clearly states that you need to be in proper gb with cf-root kernel.
aquanuke said:
KingDroid_ICS_NoteMania_Edition_v1.6
Click to expand...
Click to collapse
You are Superbricked. Get your phone to a Samsung Service cetre for the motherboard replacement.
JTag is not an option here, it won't work.
ooopppsss ok thanks.
I even tried re-partitioning using Odin and PIT file. seems that it is always stuck on the same spot.
Fixed!!!
I used this: http://forum.xda-developers.com/showthread.php?t=1682444
Nice asafki shame I can't try that as o2 gave me a brand new note :good:
asafki said:
Fixed!!!
I used this: http://forum.xda-developers.com/showthread.php?t=1682444
Click to expand...
Click to collapse
check how much data space you lost.
Sent from my GT-P1010 using XDA

Is my O2x bricked?

hy guys,
i have a problem.
i was on v28g first generation rom and today i tried to upgrade to second generation.
i nvflashed the second generation rom, the phone started, no problem. after a while, the phone freezes and i had to pull off the battery because the phone doesn't respond to any command.
since then my phone is dead, don't want to start, nothing.
i tried to nvflash the first and the second generation rom, but the process is stopping at "waiting for bootloader to initialize".
i tried to nvflash a froyo/gb rom but i had the same issue.
smartflash don't works
the pc don't recognize the phone
the phone is dead dead dead
any idea?
thanks
i'm not an expert, but i've been following the development since a while. you can try a few things...
1 - try to nvflash from another pc
2 - open the file as pc administrator
3 - nv flash an old gb rom
good luck
Did you try a hard rest? Usually it works...
i tried a hard reset (both methods) but the phone is dead, does not react.
O2 is literally unbrickable....
\/ Check my signature down there \/
jerichoo said:
hy guys,
i tried to nvflash the first and the second generation rom, but the process is stopping at "waiting for bootloader to initialize".
Click to expand...
Click to collapse
after connecting your phone in APX mode (battery out, hold both volume + and - then plug in USB) put battery in again and use nvflash.
My P990 has this problem too, need to put battery back in to use nvflash.
I've been through some similar experience after flashing v28 leak ICS.
I wanted to come back to CM7 or the stock LG ROM.
The only method that worked is this described here: http://forum.xda-developers.com/showthread.php?t=1970979
It uses nvflash to flash an old version of LG stock ROM. After that you can update it however you want.
You will have to root your device again after this.
jerichoo said:
hy guys,
i have a problem.
i was on v28g first generation rom and today i tried to upgrade to second generation.
i nvflashed the second generation rom, the phone started, no problem. after a while, the phone freezes and i had to pull off the battery because the phone doesn't respond to any command.
since then my phone is dead, don't want to start, nothing.
i tried to nvflash the first and the second generation rom, but the process is stopping at "waiting for bootloader to initialize".
i tried to nvflash a froyo/gb rom but i had the same issue.
smartflash don't works
the pc don't recognize the phone
the phone is dead dead dead
any idea?
thanks
Click to expand...
Click to collapse
Its just network/USB cable problem.. replace USB cable. it will work.
guys, I tried EVERY method, unsuccessfully.
same message "waiting for bootloader to initialize"
Maybe the battery?
Sent from my LG-P990 using xda app-developers app
jerichoo said:
hy guys,
i have a problem.
i was on v28g first generation rom and today i tried to upgrade to second generation.
i nvflashed the second generation rom, the phone started, no problem. after a while, the phone freezes and i had to pull off the battery because the phone doesn't respond to any command.
since then my phone is dead, don't want to start, nothing.
i tried to nvflash the first and the second generation rom, but the process is stopping at "waiting for bootloader to initialize".
i tried to nvflash a froyo/gb rom but i had the same issue.
smartflash don't works
the pc don't recognize the phone
the phone is dead dead dead
any idea?
thanks
Click to expand...
Click to collapse
Lol brick 2x XD. Flash originale rom:thumbup:
Sent from my LG-P990 using xda app-developers app
neo5icek said:
Maybe the battery?
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
when you use nvflash the baterry must be pulled off, so i guess it has nothing to do.
alexcyb said:
Lol brick 2x XD. Flash originale rom:thumbup:
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
i tried to flash a v10 and a v20 rom
http://forum.xda-developers.com/showthread.php?t=1054492
http://www.youtube.com/watch?v=nmzk92rV6k4
http://www.modaco.com/topic/335474-25-mar-nvflash-stock-rom-release-v10b-dated-1300166062-15032011/ (recommended)
(reinstall system or try on another pc)
thanks everyone, for the moment, the phone is going to warranty...
Good Luck
Sent from my LG-P990 using xda app-developers app
jerichoo said:
thanks everyone, for the moment, the phone is going to warranty...
Click to expand...
Click to collapse
man.. you "can't brick" your phone....it will always be able to get into nvflash mode.. and this is the way out.
Maybe your phone is tired of always reFLASHing. Give it a break perhaps
aldyu said:
Maybe your phone is tired of always reFLASHing. Give it a break perhaps
Click to expand...
Click to collapse
+1
that's very possible
jerichoo said:
hy guys,
i have a problem.
i was on v28g first generation rom and today i tried to upgrade to second generation.
i nvflashed the second generation rom, the phone started, no problem. after a while, the phone freezes and i had to pull off the battery because the phone doesn't respond to any command.
since then my phone is dead, don't want to start, nothing.
i tried to nvflash the first and the second generation rom, but the process is stopping at "waiting for bootloader to initialize".
i tried to nvflash a froyo/gb rom but i had the same issue.
smartflash don't works
the pc don't recognize the phone
the phone is dead dead dead
any idea?
thanks
Click to expand...
Click to collapse
O2x is unbrickable !
Use progmaq-default-cm-10 to return to CM10 with old bootloader ...
Good Luck ! :good:
tried that too (proqmag, homero etc), the phone is f*****g dead, no sign of life, all the nvflashes stucks at "waiting for the bootloader to initialize", i tried on different pc's, i don't know what else to do....

please help bricked my phone

please help me i have flashed using convert kdz and flashed by SFT.. my phone now not working.. no power any thing... what i do now ???:crying:
remove the battery, enter in s/w update mode and reflash whith SFT but with a good rom.
=> http://forum.xda-developers.com/showthread.php?t=1448803
rom V20O => http://forum.xda-developers.com/showpost.php?p=23788913&postcount=170
But it's not connecting to s/w update mode. No power any more... Pc not detect my phone...
I tried everything.. removed battery and connect phone but nothing happend, just like dead phone.
Sent from my LT18i using Tapatalk 2
jimmysmart83 said:
But it's not connecting to s/w update mode. No power any more... Pc not detect my phone...
I tried everything.. removed battery and connect phone but nothing happend, just like dead phone.
Sent from my LT18i using Tapatalk 2
Click to expand...
Click to collapse
If you really did everything and in a right way, you can start to build a new house because you have the first brick already.But...it's not so easy to brick a phone with SFT.If you really followed the rules for Smart Flash Tool it's practically impossible.I know that people tend to panic in such situations and do something wrong in a rush.Well, take the battery, sim card and memory card out of the phone; hold the volume up button and then plug your usb cable( sure that cable and contacts are okay ), which is pluged in your computer with SFT opened; sometimes the phone enters in s/w mode in a second but sometimes needs five.Then flash a GB rom or anything you want.If nothing will happen is very much possible that you have a hardware problem( something similar happened to me when my motherboard was fu.ked and this is quite common with P970 ).Good luck.:fingers-crossed:
P.S. Are you talking about SE arc or LGE P970?
jimmysmart83 said:
But it's not connecting to s/w update mode. No power any more... Pc not detect my phone...
I tried everything.. removed battery and connect phone but nothing happend, just like dead phone.
Sent from my LT18i using Tapatalk 2
Click to expand...
Click to collapse
Did you maybe flash a wrong ROM? Double check please. Whats the name of your kdz file? Where did you get it from? Did you interupt the update procedure? Or did it get interrupted?
Sent from my LG-P970 using xda app-developers app
Edvin73 said:
If you really did everything and in a right way, you can start to build a new house because you have the first brick already.But...it's not so easy to brick a phone with SFT.If you really followed the rules for Smart Flash Tool it's practically impossible.I know that people tend to panic in such situations and do something wrong in a rush.Well, take the battery, sim card and memory card out of the phone; hold the volume up button and then plug your usb cable( sure that cable and contacts are okay ), which is pluged in your computer with SFT opened; sometimes the phone enters in s/w mode in a second but sometimes needs five.Then flash a GB rom or anything you want.If nothing will happen is very much possible that you have a hardware problem( something similar happened to me when my motherboard was fu.ked and this is quite common with P970 ).Good luck.:fingers-crossed:
P.S. Are you talking about SE arc or LGE P970?
Click to expand...
Click to collapse
maybe something wrong i did but sft tool completed flash my phone i think my kdz file was wrong maybe... i give it to mobile repair center today and he also said that phone is totally dead not detecting to pc, now he will check motherboard... tomorrow i will know...
i am talking about LG P970
anyway i have SE Arc S also.
N00BY0815 said:
Did you maybe flash a wrong ROM? Double check please. Whats the name of your kdz file? Where did you get it from? Did you interupt the update procedure? Or did it get interrupted?
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
first time i was flashed stock ROM V10A which downloaded from here But my phone bootloop its only showing LG logo and touch buttons flashing only, so i searched in xda to try another method and i got V10G_00.kdz file from india region and got [TOOL] LGExtract 0.2.1 do it all process i think i lost my recovery or maybe motherboard problem....
anyway if any suggestions please reply...
jimmysmart83 said:
first time i was flashed stock ROM V10A which downloaded from here But my phone bootloop its only showing LG logo and touch buttons flashing only, so i searched in xda to try another method and i got V10G_00.kdz file from india region and got [TOOL] LGExtract 0.2.1 do it all process i think i lost my recovery or maybe motherboard problem....
anyway if any suggestions please reply...
Click to expand...
Click to collapse
Are you sure you used the v10G for P970? Cause otherwise only and interruption could cause such a hard failure...
N00BY0815 said:
Are you sure you used the v10G for P970? Cause otherwise only and interruption could cause such a hard failure...
Click to expand...
Click to collapse
yes m sure.
jimmysmart83 said:
first time i was flashed stock ROM V10A which downloaded from here But my phone bootloop its only showing LG logo and touch buttons flashing only, so i searched in xda to try another method and i got V10G_00.kdz file from india region and got [TOOL] LGExtract 0.2.1 do it all process i think i lost my recovery or maybe motherboard problem....
anyway if any suggestions please reply...
Click to expand...
Click to collapse
Well, the phone goes in bootloop when you flash patched files with recovery and then forget to flash Superuser.You must not boot your phone when it enters in recovery after flashing with SFT but flash Superuser from your SD card first.I think that this maybe was your first problem.But LG logo and flashing leds are also a very possible sign for a faulty motherboard.The same happened to me with one week old P970 with official firmware and not rooted, when I tried just to reboot the thing.And if your phone died after this, you can be 99.9% sure that you have a fu.ked motherboard.

S/W upgrade mode problem

Hello there,
I rooted my X3, unlocked bootloader, flashed CWM and Upgraded to V20A and everything was going great.. Till i decided to flash eternity kernel since people's feedback in their replies encouraged me to do so..
So i downloaded the eternity kernel version for stock rom, flashed it and it did 2 very bad things to my phone (i honestly don't know why this happened only to me.. No one reported such errors)..
First, i had boot loop stuck on the LG logo animation that kept repeating over and over - endless..
Then, when i tried to go to s/w mode (holding vol- while connecting the cable) i am getting white screen with tiny black lines! And the phone is not being detected by the computer (of course i have all drivers installed).
So i overcame the boot loop problem by flashing eternity kernel version for CM as well as the CM 10.1 nightly rom over CWM.. And am luckily able to boot and use the device..
I just still can't use kdz anymore cause of the s/w mode malfunction..
A friend suggested flashing the LG stock kernel.zip for V20A over CWM since i have it and since i didnt get the s/w mode error except after i installed the eternity kernel so he's linking the error with the kernel, could that be correct?
If it is correct, I'm not sure if stock kernel for V20A is compatible with CM 10.1 or will mess my phone even worse?..
Sorry for the long post but all what i need is to see my baby back in s/w mode so that i can use kdz
And in case i have to wait for the final kernel by eternity, is there any workaround to get it detected by the pc for kdz upgrades without going through the s/w mode?
Any help will be much appreciated!
Sent from my LG-P880 using xda premium
3adli said:
Hello there,
I rooted my X3, unlocked bootloader, flashed CWM and Upgraded to V20A and everything was going great.. Till i decided to flash eternity kernel since people's feedback in their replies encouraged me to do so..
So i downloaded the eternity kernel version for stock rom, flashed it and it did 2 very bad things to my phone (i honestly don't know why this happened only to me.. No one reported such errors)..
First, i had boot loop stuck on the LG logo animation that kept repeating over and over - endless..
Then, when i tried to go to s/w mode (holding vol- while connecting the cable) i am getting white screen with tiny black lines! And the phone is not being detected by the computer (of course i have all drivers installed).
So i overcame the boot loop problem by flashing eternity kernel version for CM as well as the CM 10.1 nightly rom over CWM.. And am luckily able to boot and use the device..
I just still can't use kdz anymore cause of the s/w mode malfunction..
A friend suggested flashing the LG stock kernel.zip for V20A over CWM since i have it and since i didnt get the s/w mode error except after i installed the eternity kernel so he's linking the error with the kernel, could that be correct?
If it is correct, I'm not sure if stock kernel for V20A is compatible with CM 10.1 or will mess my phone even worse?..
Sorry for the long post but all what i need is to see my baby back in s/w mode so that i can use kdz
And in case i have to wait for the final kernel by eternity, is there any workaround to get it detected by the pc for kdz upgrades without going through the s/w mode?
Any help will be much appreciated!
Sent from my LG-P880 using xda premium
Click to expand...
Click to collapse
i guess you took out the battery while connecting? if yes, then put it back in before connecting to the pc happened to me, too but this solves the "problem"
I just cant stop laughing my ass off.. Stupidity has no limits. Lol, delete post please
Sent from my LG-P880 using xda premium

[QHsusb_Dload] How to unbrick MI3 WCDMA

Hey everyone currently experiencing this semi-bricked as it still recognized on my pc, here's details situations i faced.. Running official V6 , it stuck & freeze on MI logo, i decided to power it off, ive checked the battery before that freeze was about 53%, after that the phone won't even power up no led, try to entering recovery (no luck), trying to access fastboot mode (no luck), downloading MiflashTool and reads every tutors&articles till now nothing work, i connected to pc redlight appeared for a while, i saw that installing driver (usb input installed), then i press the whole button (power+vol-up/down its installing driver (Qhsuab_dload installed) but no luck when try to flash it with miflashtool.. I really need some help to unbrick this devices, any help&suggestions would be appreciated. Thanks
I put some pictures so you guys know what am faces
Some pictures here
Hum wow, had you resized your partitions?
I should have a sugestion, but it may not please you...
Here it is : http://en.miui.com/thread-73348-1-1.html
But before trying it just wait for other replies.
Regards and good luck.
Its done at 2nd try sir, but still no luck bro..usb port recognized but won't flash it throw me to some errors, see on Q&A for logs
SH1M4BD3 said:
Its done at 2nd try sir, but still no luck bro..usb port recognized but won't flash it throw me to some errors, see on Q&A for logs
Click to expand...
Click to collapse
How about this?
How to Unbreak Xiaomi Mi 3 (soft break) - No need to open back cover -*http://en.miui.com/thread-84669-1-1.html
No luck broo fail..ok i sold..this crap
SH1M4BD3 said:
No luck broo fail..ok i sold..this crap
Click to expand...
Click to collapse
This CRAP haha had this happend to me it is a fully bricked phone u could fix it up by opening the phone and connecting some testpoints when flashing (tutorial on miui forum).
I sent it to repair as this same thing happend to me basically the "memory block" got bricked.
You know its just not make sense, i used it normally, not even yet try to root or flashing something, its fully stock, upgrading once..i used it about 2months normal use, but suddenly facing this, come on ..
Well this is what happend when I upgraded my version of MIUI through fastboot. Not sure how u got this but that is what it means as I had this too.
Latest update i always done was an ota stable one and am sure that was recovery way

Categories

Resources