Hi everybody!
I have a rooted Galaxy note: BBversion N7000XXLRB and kernel speedmode k3-13. I have a USB 3G modem ZTE MF 667 and want to use it with an OTG cable for internet access. I installed the pppwidget and gives me the message "driver not found"
I read everything about "driver not found" on page developer pppwidget, and here on xda: http://forum.xda-developers.com/showthread.php?t=1795591&page=21 but it seems that solving the problem would be only the stock rom.. There are drivers only for stock rom, not for the custom. His recommendation is to ask developers to implement new modules. I do not want to give up this rom and go to the stock, what solutions do you think I have?
P.S:
If my problem is not related to this topic, recommend me where to ask.
Thank you very much!
Here is the pppwidget USB log
Nobody?
emporiome said:
Nobody?
Click to expand...
Click to collapse
What rom and kernel are you currently on? Just out of interest, why do you need an external modem?
Sent from my GT-N7000 using xda premium
SpyderTracks said:
What rom and kernel are you currently on? Just out of interest, why do you need an external modem?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I wrote above: stock ICS 4.04 N7000XXLRI + speedmode K13.
I need external modem because I have a 500Mb data traffic / month subscription provider and have this USB modem as backup from another supplier. The USB modem I have 3GB / month traffic.
Currently the only solution is to change between them the 2 SIM cards when I finished the 500Mb, which is inconvenient.
Thx for reply!
emporiome said:
I wrote above: stock ICS 4.04 N7000XXLRI + speedmode K13.
I need external modem because I have a 500Mb data traffic / month subscription provider and have this USB modem as backup from another supplier. The USB modem I have 3GB / month traffic.
Currently the only solution is to change between them the 2 SIM cards when I finished the 500Mb, which is inconvenient.
Thx for reply!
Click to expand...
Click to collapse
That's what I don't understand, you say that the only fix is to be on stock rom, but you are on stock rom....
As that thread points to tablet ui's being used, I would suggest trying a cm or aokp rom as they're able to run tablet mode, maybe drivers aren't included in limited stock rom.
Sent from my GT-N7000 using xda premium
SpyderTracks said:
That's what I don't understand, you say that the only fix is to be on stock rom, but you are on stock rom....
As that thread points to tablet ui's being used, I would suggest trying a cm or aokp rom as they're able to run tablet mode, maybe drivers aren't included in limited stock rom.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
From what I know, drivers are included in the kernel. In vain stock rom installed, if I use the kernel from speedmode. That was precisely the problem, I should install stock rom without custom kernel, which i d'ont want.
THX!
Related
Hi guys,
I own a Galaxy S i9000 mobile.
It's running on :
Android 2.3.3
Baseband : DXJV9
I have not rooted it or did anything till now.
I wanna flash ICS AOKP on my mobile..
I have tried using the search option but still im soo deserted.
Can you guys guide me on how to root,flash CWM recovery, and flash ICS please ?
and Does Galaxy S supports ROM Manager ? coz i've been using Galaxy Ace before and it didn't support it..
Thanks a lot
For Root read this.
http://forum.xda-developers.com/showthread.php?t=788108
You need to download file ending in JVP. Usually you want the one ending with last 3 digits of your baseband but as there is no JV9 JVP is close enough and is reported as working. Besides it does not really matter as you just need this for root.
Once you have root you can simply follow the guide in the AOKP thread...
http://forum.xda-developers.com/showthread.php?t=1524108
I know you have stated you want AOKP but if you want a bullet proof simple way to get this all done start with this thread for Team ICSSGS.
http://forum.xda-developers.com/showthread.php?t=1494493
I usually like to make sure I have all necessary files, roms & programmes before starting so if anything goes wrong I can get my phone working again. This tutorial will help you with that also.
After following all of this you should have a good understanding of what to do and then you can flash AOKP as their instructions are kind of limited.
Also when choosing an ICS Rom this is a great thread with regards to performance.
http://forum.xda-developers.com/showthread.php?t=1554621
AOKP is a wonderful choice.
But if I can give you an advice, wait for the next Milestone which is expected to be released over the next few days
scubadude said:
For Root read this.
http://forum.xda-developers.com/showthread.php?t=788108
You need to download file ending in JVP. Usually you want the one ending with last 3 digits of your baseband but as there is no JV9 JVP is close enough and is reported as working. Besides it does not really matter as you just need this for root.
Once you have root you can simply follow the guide in the AOKP thread...
http://forum.xda-developers.com/showthread.php?t=1524108
I know you have stated you want AOKP but if you want a bullet proof simple way to get this all done start with this thread for Team ICSSGS.
http://forum.xda-developers.com/showthread.php?t=1494493
I usually like to make sure I have all necessary files, roms & programmes before starting so if anything goes wrong I can get my phone working again. This tutorial will help you with that also.
After following all of this you should have a good understanding of what to do and then you can flash AOKP as their instructions are kind of limited.
Also when choosing an ICS Rom this is a great thread with regards to performance.
http://forum.xda-developers.com/showthread.php?t=1554621
Click to expand...
Click to collapse
Thanks for replying..
And where can i get the Odin and the .ops file for Galaxy S?
Thanks again
You must register to download anything.
http://www.sammobile.com/
This link has passwords & instructions for sammobile firmware downloads.
http://www.sammobile.com/firmware/?page=-1
Firmware link for Galaxy s i9000
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9000&r=-1#modelsa
Odin (choose i9000)
http://www.sammobile.com/firmware/?page=5&t=1&o=1#osa
flash guide if you want it (choose i9000)
http://www.sammobile.com/firmware/?page=6&t=1&o=1#osa
scubadude said:
You must register to download anything.
http://www.sammobile.com/
This link has passwords & instructions for sammobile firmware downloads.
http://www.sammobile.com/firmware/?page=-1
Firmware link for Galaxy s i9000
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9000&r=-1#modelsa
Odin (choose i9000)
http://www.sammobile.com/firmware/?page=5&t=1&o=1#osa
flash guide if you want it (choose i9000)
http://www.sammobile.com/firmware/?page=6&t=1&o=1#osa
Click to expand...
Click to collapse
Thank you soo much for your help bro
That link for flashing Team ICSSGS has help for everything else. From downloading stock rom to flashing with Odin to flashing ics (in this case team icssgs)
You could potential substitute Team ICSSGS for AOKP.
I got another question..
does Semaphore ICS kernel works on my baseband (i.e - DXJV9) ?
Will do. My favourite.
Sent from my GT-I9000 using Tapatalk 2
scubadude said:
Will do. My favourite.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
Great
and finally, Which version of the kernel should i use for official AOKP b34? 1.1.0 or 1.1.0s?
Not sure but both should work. 1.0.1s is for slim ics and other roms. If it is not compatible it will break 720 video recording & playback otherwise eveything else should work. There is also a video patch somewhere.
Sent from my GT-P7500 using Tapatalk 2
scubadude said:
Not sure but both should work. 1.0.1s is for slim ics and other roms. If it is not compatible it will break 720 video recording & playback otherwise eveything else should work. There is also a video patch somewhere.
Sent from my GT-P7500 using Tapatalk 2
Click to expand...
Click to collapse
Alright..I've flashed AOKP b34 and Semaphore 1.1.0s
Everything seems to be fine
But now my sdcard is mounted as internal storage and the actual internal storage is mounted as sdcard..is this a bug or what ?
Even when I connect my phone to my PC using USB,only the actual internal storage (which is mounted as SDcard shows up..
I personally haven't 1.1.0 only 1.0.1sbm with slim ics. I think the 1.1.0 is still a test version for cm9 but could be wrong. Things may have updated since i last looked but i recommend reading the semaphore thread and posting there for more help.
Sent from my GT-P7500 using Tapatalk 2
Hello another sg user
Sent from my GT-I9000 using xda premium
Suggest ICS rom for you
I would like to suggest ICS rom for you
http://forum.xda-developers.com/showthread.php?t=1560524&highlight=aroma
This is quite easily to install because it have menu interactive to do with and it quite smooth when use it.
http://hdtechvideo.com/community/index.php
go here
http://www.darkyrom.com/community/index.php?threads/discuss-custom-ics-roms-for-sgs1-here.7309/
Sys81 said:
Hello another sg user
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Hey!
TIGER 123 said:
http://hdtechvideo.com/community/index.php
go here
http://www.darkyrom.com/community/index.php?threads/discuss-custom-ics-roms-for-sgs1-here.7309/
Click to expand...
Click to collapse
frankind said:
I would like to suggest ICS rom for you
http://forum.xda-developers.com/showthread.php?t=1560524&highlight=aroma
This is quite easily to install because it have menu interactive to do with and it quite smooth when use it.
Click to expand...
Click to collapse
scubadude said:
I personally haven't 1.1.0 only 1.0.1sbm with slim ics. I think the 1.1.0 is still a test version for cm9 but could be wrong. Things may have updated since i last looked but i recommend reading the semaphore thread and posting there for more help.
Sent from my GT-P7500 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for helping..
I switched to SlimICS and Semaphone 1.1.1 and it fixed it all..
and now the only problem I'am facing is that WiFi Tethering is not working..Is it just for me or it doesn't work for all of you people ?
Hameedhudeen said:
Hey!
Thanks for helping..
I switched to SlimICS and Semaphone 1.1.1 and it fixed it all..
and now the only problem I'am facing is that WiFi Tethering is not working..Is it just for me or it doesn't work for all of you people ?
Click to expand...
Click to collapse
Known bug in Semaphore. Make sure you enable the 'Netfilter' module in the app. When it randomly doesn't work, which is the bug, simply check and uncheck it 2 times and it will work.
Well it seems dat u gettin alot of hlp alrdy bt u need hlp like immediately u can pm me ur hp no.
Sent from my GT-I9000 using xda premium
upichie said:
Known bug in Semaphore. Make sure you enable the 'Netfilter' module in the app. When it randomly doesn't work, which is the bug, simply check and uncheck it 2 times and it will work.
Click to expand...
Click to collapse
That fixes it.
Thank you
Sys81 said:
Well it seems dat u gettin alot of hlp alrdy bt u need hlp like immediately u can pm me ur hp no.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Yea, I got a lots of help by this thread..
Thanks all!
Now, The only problem I'am experiencing is a little more battery drain when compared to GB.
I am gonna experiment with modems..
Hello
I just rooted my gt-n7000, and added franco kernel-r5, and now mybluetooth cant work anymore.... is there any way to fix this problem without having to lose any data, or do a restore factory.....
Thanls, any help would be really appreciated.
try flashing another kernel (e.g. SpeedMod or HydraCore) using Mobile Odin and see if your BT will work after.
abdallah93 said:
Hello
I just rooted my gt-n7000, and added franco kernel-r5, and now mybluetooth cant work anymore.... is there any way to fix this problem without having to lose any data, or do a restore factory.....
Thanls, any help would be really appreciated.
Click to expand...
Click to collapse
Yeah, if u using stock firmware, try speedmod .. hydracore otherwise
Get this ... http://forum.xda-developers.com/showthread.php?p=28245219
Sent from my GT-N7000 using xda app-developers app
reply
letters_to_cleo said:
try flashing another kernel (e.g. SpeedMod or HydraCore) using Mobile Odin and see if your BT will work after.
Click to expand...
Click to collapse
does flashing another kernel replace the previous one, or remove it ???,,,,,
just wanted to know!!!!!
abdallah93 said:
does flashing another kernel replace the previous one, or remove it ???,,,,,
just wanted to know!!!!!
Click to expand...
Click to collapse
Will replace your current kernel. Always make sure to check that the kernel has been certainly flashed even when no errors are shown.
reply
thanks alot guys, i got my bluetooth running again...... thank u vry mch for the hlp
Glad to know it worked for you already bud.. and yeah.. some kernels have some kinks still.. some don't support BT, others WIFI, MTP for others and etc...
You just need to flash a good working kernel that generally works on all the features of your phone.
My csc show unknown after flash this rom..why it happen?please help me to solve this problem
TQ
flash the rom again without wipes
nokiamodeln91 said:
flash the rom again without wipes
Click to expand...
Click to collapse
same..csc unknown
You may try flashing GB or ICS, set right the phone. Later you can install JB.
Sent from my GT-N7000 using xda premium
nokiamodeln91 said:
flash the rom again without wipes
Click to expand...
Click to collapse
Does anyone confirm flashing again the rom fixes the unknown csc? The same version (v5.1) or another version (previous as v4) of the rom?
CSC= UNKNOWN
same problem with me, also hanging alot
please someone comeup with solution..
Some problems after installing Ultimate JB 5.1
I came from CyanogenMod 9.1.0 Stable.
On the whole Ultimate JB 5.1 is good but:
1) Bad battery life - the wifi stays on 24x7 even though I mention only when charging.
2) The Google search doesn't include options for Evernote and Google Drive and other apps. I don't know if it is specific to this Rom or JB.
3) I can't go back to CM9. The package doesn't install anymore. Do I need to change the kernel in Ultimate JB 5.1 first?
Ultimate XXLSC JellyBean 4.1.2 v5.1
Kernel 3.0.31-593490 [email protected] #4
I wanted to post this on the much larger thread in the development section but it says newbies can't post there :crying:
is it error 7 in recovery when installing new rom? then you will need to change the kernel. but keep in mind that the other kernel you try might not be compatible with this rom and thus you will have access to recovery /download mode only. make sure you have all the required files to flash the rom before hand
Hello all,
I'm from indonesia and currently I'm on ultimate ROM 4.1.2 V5.1 from joosh and I had a problem everytime made a phone call.
The phone call always hang up or disconnect after couple times. It never let me make a phone call more than 3-5 minutes.
What do u think guys? Is it because the modem or because I had a bad signal from operator? How can I find a solution for this kind of problem...
At the first time I thought it was just a bad signal. But it happened all the time when I had a long phone call
Thanks guys and will appreciated any explanation.
Happy New Year to u all
Sent from my GT-N7000 using Tapatalk 2
Hello everybody!
I have joined XDA-Developers forum today and read a bit about rooting my GT-I8190. Here are the SPECS:
Code:
CSC: I8190OXXAMA2
PDA: I8189XXAMA2
ANDROID VERSION: 4.1.2
BUILD NUMBER: JZO54K.I8190XXAMA2
REGION: NEE (according to Kies)
So I want to root my phone. Mainly to be able to fully use BetterBatteryStats, install Titanium Backup and perhaps remove apps.
Kind of like spring cleaning.
I don't want to change my phones look and feel to much. If there are improvements I won't say no. Currently I'm having battery problems and WIFI problems...
Anyhow.. Looking around I think I've found a couple of ROMS that seems to fit my description. But then I think it's hard to compare and choose of which one I should use and therefore I need your help..
Almost forgot.. Since this is a Phone from work I need to be able to go back to original eventually.
Here are the ROMS I found:
[ROM][CWM] Stock I8190XXAMA2 4.1.2 - BenzROM V3
[ROMS][JZ054K.I9190.XXAMA1][4.1.2-Jelly-bean] [26.01.2013] V5.1
[ROM] I8190XXAMA1_I8190XAAMA1_4.1.2 V2 and V3 [ONLINE]
[ROM] Jelly Bean 4.1.2 I8190XXAMA4_I8190XXAMA2 rooted only [23.02.2013]
[ROM] I8190XXAMA3_I8190XXAMA2_Jelly_Bean_4.1.2_rooted [17.02.2013][ONLINE]
Please help me choose or give me pros and cons...
Also feel free to suggest other ROMs
I would go for benzrom v3 its very good.
Sent from my GT-I8190 using xda premium
I use benz v3, it's very good, and also deodexed :thumbup:
Sent from my GT-I8190 using Tapatalk 2
putyune save
Don't forget to vote...
There is a few pre-rooted firmwares here also that you didn't mension. Maybe you havn't seen them yet.
I'm using I8190XXAMB3_I8190XXAMB3 and I'm happy with it. Best battery time of the ones I've tried I think.
Usually on NEE too, but countrycode only matters if you rely on OTA-updates or updates through kies, which I don't. I get my updates here
Most important is to pick a firmware for your region.(Europe)
Of the ones listed in the poll I would go for BenzRom v3. Stable, fast and good battery. Or maybe wait for his v4 to come out...
Stick with BENZ ROM. Lots Of people agree.
Sent from my GT-I8190 using xda premium
Ok I will try Benz ROM.
So to use it I have to erase my phone.. That means i should check the box Re-Partition when uploading the ROM with Odin?
@tys0n, no I didn't see those ROMs before.
Also since I don't have 10 posts and cannot post on developers forum(the Benz ROM thread). I ask here. Do I really need an account on 4shared to download the ROM?
Raboo said:
Ok I will try Benz ROM.
So to use it I have to erase my phone.. That means i should check the box Re-Partition when uploading the ROM with Odin?
@tys0n, no I didn't see those ROMs before.
Also since I don't have 10 posts and cannot post on developers forum(the Benz ROM thread). I ask here. Do I really need an account on 4shared to download the ROM?
Click to expand...
Click to collapse
Yes
Sent from my GT-I8190 using xda app-developers app
ok, good, yes to re-partition.
But I have a problem Odin 3.07 will not accept .zip files as input when pressing the PDA button and browsing for the firmware. It's looking for files with other file formats.
Do I need to flash this phone with something else before using Benz ROM?
Cant you read? Where does it say flash with Odin?
You flash in CWM not Odin.
Sent from my GT-I8190 using xda premium
Benzonat0r said:
Cant you read? Where does it say flash with Odin?
Click to expand...
Click to collapse
Well it apparently was a bad assumption by me.
So I need to install another ROM with root via Odin and then install CWM and from there install your ROM?
Raboo said:
Well it apparently was a bad assumption by me.
So I need to install another ROM with root via Odin and then install CWM and from there install your ROM?
Click to expand...
Click to collapse
Easiest would be to flash cwm from odin and then flash "rom.zip" from cwm.
Last but not least, use triangle away to reset the flash count.
Most important is to pick a firmware for your region.(Europe).[/QUOTE]
What would be the best option if your region is not listed? Specifically the U.S. (T-mobile).
Guys, I need to go back to stock rom 2.3, currently I'm with the ROM ICS (http://forum.xda-developers.com/showthread.php?t=2076882&highlight=stock+ics) with the new bootloader, I wonder if I can install the stock rom 2.3 by smartflashtool directly or need to do some other procedure?
I thank anyone who can help.
elderap said:
Guys, I need to go back to stock rom 2.3, currently I'm with the ROM ICS (http://forum.xda-developers.com/showthread.php?t=2076882&highlight=stock+ics) with the new bootloader, I wonder if I can install the stock rom 2.3 by smartflashtool directly or need to do some other procedure?
I thank anyone who can help.
Click to expand...
Click to collapse
Just use the all in one tool kit and choose the gb option for partition, and smart flashing will do...
Sent from my LG-P990 using xda premium
SREEPRAJAY said:
Just use the all in one tool kit and choose the gb option for partition, and smart flashing will do...
Sent from my LG-P990 using xda premium
Click to expand...
Click to collapse
So when I change it in the toolkit, I will not be able to start over in ICS then how is the phone starts after switching the partition?
Sent from my XT915 using Tapatalk 4 Beta
elderap said:
So when I change it in the toolkit, I will not be able to start over in ICS then how is the phone starts after switching the partition?
Sent from my XT915 using Tapatalk 4 Beta
Click to expand...
Click to collapse
You will still be able to use CM 10/CM10.1....forgot to tell you that...you can use the GB in as you are in Old bootloader and GB partition.
But, can I ask you why you want to swtich over? If it is to return the device, then google V10 Stock ROM NVFlash from Paul from Modaco site. That will be a perfect GB Stock ROM without any extra effort and also the old boot loader+GB partition all in one go.
You can also try this: http://forum.xda-developers.com/showthread.php?t=1472515 Civato makes almost near to Stock ROM and perfectly smooth&stable.
Hope this helps you and maybe you can PM if you need any more help.
SREEPRAJAY said:
You will still be able to use CM 10/CM10.1....forgot to tell you that...you can use the GB in as you are in Old bootloader and GB partition.
But, can I ask you why you want to swtich over? If it is to return the device, then google V10 Stock ROM NVFlash from Paul from Modaco site. That will be a perfect GB Stock ROM without any extra effort and also the old boot loader+GB partition all in one go.
You can also try this: http://forum.xda-developers.com/showthread.php?t=1472515 Civato makes almost near to Stock ROM and perfectly smooth&stable.
Hope this helps you and maybe you can PM if you need any more help.
Click to expand...
Click to collapse
Procedure performed by toolkit to return to the old bootloader, first time I had problems to fix internal sd because the computer did not recognize the phone then redid the procedure of putting in place the CWM and TWRP then worked, after I installed the rom v20q by smartflashtool and now have a mobile fast again! \ o /
Thank you for your help and patience.