When I power down my Atrix HD, it restarts and will not stay powered down. Any help would be greatly appreciated.
Related
I rooted my kindle, then tried to use "nookcolor tools" app to select the swiftkey keyboard. I didn't change any settings using nookcolor, but I noticed my battery quit charging properly. I immediately uninstalled and the kindle began to charge again. But, now it turns on at random times during charging. Even if I shut down it reboots on its own. Any ideas on how to fix this glitch? I did notice the my battery app says the kindle has been charging for less than a minute when it reboots/turns on, almost like there is a break in the power supply.
Thanks,
Noob
My question is why you used Nookcolor Tools when it is for the Nook Color and not the Kindle Fire HD?
Sent from my KFTT using Tapatalk HD
I've got a Kindle Fire HD with stock FW that will not power on.
I've measured across all of the red wires on the battery connector to ground and I am getting 4.14vdc so I am assuming the battery is fine.
While 'charging' the KFHD, it is only pulling 1.8w/.03a from the wall.
With the back side off of the kindle the CPU area gets warm, but the battery doesn't
I've tried holding the power button down for 20-30 seconds and it still does nothing.
Would it be possible to pull the battery and cut and splice a usb cable and wire it directly to the battery port on the KFHD's mobo and attempt to power it on that way to make sure that the mobo is good? If anyone has had a similar issue please let me know.
Thanks in advance.
Sounds more like it's hard bricked, if it won't power on I'd most likely say the bootloader has something wrong with it. That can't exactly be fixed just her because we don't have the pin out of the emmc yet for the 7" HD model yet. If you can look it up there's a pin that if you from d it it would briefly show up as an omap device, if you can do that much at least then you could prove the motherboard works, but the omap device is useless because while on a kf1 we can use it to reflash the boot loader, on a kf2 we need a signed aboot that is signed by amazon to fix it.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
I've got a Nook HD running CM11 M11. It won't stay powered off. I power it off, and it shuts down, but then about 30 seconds later powers back on, as if it's going through a restart instead of a power off. I've tried it several times, including once where my husband watched to verify I was selecting the correct option.
Suggestions?
JuliMonroe said:
I've got a Nook HD running CM11 M11. It won't stay powered off. I power it off, and it shuts down, but then about 30 seconds later powers back on, as if it's going through a restart instead of a power off. I've tried it several times, including once where my husband watched to verify I was selecting the correct option.
Suggestions?
Click to expand...
Click to collapse
You did not mention whether the Nook is plugged in. It will always boot up when external power is applied. You can shut it down fully when running on battery only.
Sorry. Yes, not plugged in. It turns back on when running on battery power.
JuliMonroe said:
I've got a Nook HD running CM11 M11. It won't stay powered off. I power it off, and it shuts down, but then about 30 seconds later powers back on, as if it's going through a restart instead of a power off. I've tried it several times, including once where my husband watched to verify I was selecting the correct option.
Suggestions?
Click to expand...
Click to collapse
Same problem with my Nook HD & my wife's both with CM 11
I have solved it by using QuickBoot app to shut it down. I know it really isn't solving the problem, but at least when I turn it off it stays off
Here's the link to the app
https://play.google.com/store/apps/details?id=com.siriusapplications.quickboot
Had the same problem. Updated to the next nightly and the problem was gone
Hi,
I recently updated my nook HD with the June 14 CM11 nightly update, and now my device won't charge at all. I plug it in and nothing happens. I have tried multiple cords and none work. Also, I can't power off the device. Every time I turn it off, it just reboots. Even when I hold the power button to turn it off, it still turns back on. How can I fix this? Any help is appreciated.
Hello, I recently bought a new EB20 Battery (Motorola Branded) for my Motorola Atrix HD, and whenever I plug it in to charge it (the phone can be on or off, it doesn't matter), it shows that it is charging, but it never even goes up one percent! I would like to know if anyone has a fix for this, or if there is something I am doing wrong. Thanks in advance.