Related
This topic is for my MoDaCo Custom Kernel for the LG Optimus 2x - Stock Edition
Features include...
Based on the LG source
[*]Kernel version 2.6.32.9
Includes EXT4 support (with optional EXT4 conversion on install)
Includes CIFS and TUN modules
Two downloads area available, one for users who wish to stay on EXT3 and one for users who would like their device converted to EXT4 on install (without data loss).
r4 DOWNLOAD - EXT4 version (ROMraid Load Balancing) - MD5: 55470db6a9cb5a88716210de5afbfbb1
r4 DOWNLOAD - EXT3 version (ROMraid Load Balancing) - MD5: ae9d85a37bb6fe439f12066d20345df8
Installation should be carried out via ClockworkMod, please do a backup first! This kernel should be compatible with all stock and custom ROMs.
Enjoy!
P
PS I will be posting the full sources on my GitHub in due course.
keep up the great work paul
Does this change alot?
Redshark976 said:
Does this change alot?
Click to expand...
Click to collapse
Fastest kernel I used!
3400 quadrant, without overclock! Very snappy
Hi,
I'm coming from MCR fr17 Fear Kill edition 10.. it is using the 2.6.32.8 kernel.
My questions are as per below (Sorry I'm new to android devices and trying my best to learn):
a) When flashing a new kernel, I just put it in my SD card and flash it in recovery correct? Or do I need to perform a wipe before doing so? Need to clear any cache etc?
b) For those that have tested this kernel, care to upload the stable voltage for 1000 mhz, 1200mhz and 1300mhz?
c) What if I undervolted it so much that it isnt a stable voltage? Will my phone be a brick?
Thanks to all that take the time to guide a noob like me.
kelvin_tan said:
Hi,
I'm coming from MCR fr17 Fear Kill edition 10.. it is using the 2.6.32.8 kernel.
My questions are as per below (Sorry I'm new to android devices and trying my best to learn):
a) When flashing a new kernel, I just put it in my SD card and flash it in recovery correct? Or do I need to perform a wipe before doing so? Need to clear any cache etc?
b) For those that have tested this kernel, care to upload the stable voltage for 1000 mhz, 1200mhz and 1300mhz?
c) What if I undervolted it so much that it isnt a stable voltage? Will my phone be a brick?
Thanks to all that take the time to guide a noob like me.
Click to expand...
Click to collapse
In Pimp my CPU, use the stress test to see if its stable. Use the settings without saving it so you dont boot with those settings. But just to make sure, make a backup of the rom if absolute everything f*cks up.
Sent from my LG-P990 using Tapatalk
Currently I cant even run a CPU Stress Test. When I do, the application will be forced closed.
Do take note that I havent flashed in this new kernel yet.. Using 2.6.32.8 atm
I flashed this Kernel with Stock ROM, but I found that my existing Pimp my CPU not work anymore. Please suggest use with version is fine, Thanks.
Same, this kernel doesn't support PimpCPU I believe. Nevertheless, it's the most stable kernel that I've tried so far...
What advantages are their of converting to ext4? Looking for a good kernel current running modaco fr17 will this be ok?
Sent from my LG-P990 using XDA Premium App
Please delete...
salisbury_steak said:
Same, this kernel doesn't support PimpCPU I believe. Nevertheless, it's the most stable kernel that I've tried so far...
Click to expand...
Click to collapse
it's not a OC kernel so its normal that PimpMyCpu not work...
ilos said:
it's not a OC kernel so its normal that PimpMyCpu not work...
Click to expand...
Click to collapse
I'm actually not looking for an OC, I was looking for a UV.
Sorry if it is a noobish question but wat advantage does this bring over stock kernel?
Sent from my LG-P990 using Tapatalk
This kernel provides ext4 support. And a small fix I believe. So the advantage is a general speed improvement with phone usage.
Guys, my O2X just got updated (via LG PC Suite) to v10d. I already rooted it, but can anyone confirm if this kernel still works with it?
salisbury_steak said:
This kernel provides ext4 support. And a small fix I believe. So the advantage is a general speed improvement with phone usage.
Guys, my O2X just got updated (via LG PC Suite) to v10d. I already rooted it, but can anyone confirm if this kernel still works with it?
Click to expand...
Click to collapse
doesn't seem to be compatible with v10d (Philippines)...
Thanks for the confirmation pare! :-D
salisbury_steak said:
Thanks for the confirmation pare! :-D
Click to expand...
Click to collapse
no problem. i hope we get an updated version of this kernel...
is this working for MoDaCo FR19 Fear Edition 12.2 ROM? because i get stuck at the lg logo.. or maybe can someone list down the exact steps to flash this kernel..
hey guys can anybody provide instruction on how to flash cm9 on my optimus 2x. also is it ext3 or ext4 and which one is the best kernel + rom combo.
can games like gta 3 also run on cm9?
The two best CM9 roms are as far as I know, Owains CM9 build and Heis Nova HD. (you can find them both in the dev section). I believe CM9 is EXT4, like CM7.
As for kernels it becomes a little more complicated because there are about 5 different kernels for CM9 (Spicas HP extreme, Harsh's Reborn, Supernova HD, wkparks 3.0 kernel, Ironkernel (don't use this one!) and stock CM9 of course) So there is a lot to choose from, all you have to do is reading the threads and make up your own mind.
If you want to flash CM9, you first need to make a backup of your apps, contacts etc., because it requires a full wipe. Oh, you also need CM9 gapps obviously, you can find them somewhere on the Internet.
So all you gotta do in CWM recovery is:
1. (optional) Backup CM7
2. Wipe data/system/dalvik
3. Install rom
4. Install kernel
5. Flash gapps
Then you should be done!
what about games, do they run in cm9 like gta 3 or fruit ninja?
I think they should work ok, but not at their maximum potential. As you might know, CM9/ICS for our device still lacks HW acceleration. This essentially makes your phone smoother, so also gaming. With other words they should work fine if you compare it to CM7, but not good enough if you compare it to normal ICS with HW acceleration I think.
lopiop said:
what about games, do they run in cm9 like gta 3 or fruit ninja?
Click to expand...
Click to collapse
I have played both of these games and they run absolutely the same as on cm7
B/w I'm running cm9 with hp kernel rc1-r
Only thing is that idle battery life (8 hrs sleep time) is increased from 3% to 5-6%...not much of a problem if you ask me
so what i cant do in ics, take video recording and view videos as well as no adobe flash?
also is stock kernel owain kangs build stable and smooth?
lopiop said:
so what i cant do in ics, take video recording and view videos as well as no adobe flash?
also is stock kernel owain kangs build stable and smooth?
Click to expand...
Click to collapse
Actually you can use MX Video player to watch just about any video you want, upto 720p in S/W fast mode
Havn't tried Owain Build, but i think Spica's Kernel, ironkernel and stock ics kernel are stable enough....have tried them all and no bsod's!!
As for video recording there is video illusion working in cm9
lopiop said:
also is stock kernel owain kangs build stable and smooth?
Click to expand...
Click to collapse
At the moment one of the best builds/kernels, an alternative would be the SuperNova kernels.
lopiop said:
also is stock kernel owain kangs build stable and smooth?
Click to expand...
Click to collapse
Harch kernel is also a good kernel if you want stock speeds and good battery life.
Sent from my LG-P990 using Tapatalk 2
It would be nice if someone more experienced explain all steps for installing NOVA HD i mean explanation about steps for customization NOVA HD. Tnx in advance.
I would suggest you to try out latest Owain's rom and if I get it right, he have baked harsh rom with fix kernel into the rom, so you can use UMS (usb mass storage) for now latest is build 40 but i guess it is b41 comming out today for some reasons.. It is the smoothest and more stable rom that I ever had.. And battery life is awesome coz i guess harsh kernel is set to undervolt, but it doesn't affect the performance, and no problems with watching videos, for taking video you can take Videocam Illusion, works on g2x and o2x . I dont know about full version, but free one's quality is ****ty, but just in case I see UFO crash lol =)
What are the steps if i want to revert back to CM7, because i hate that the video camera doesn't work?
Tks.
alysiper said:
What are the steps if i want to revert back to CM7
Click to expand...
Click to collapse
They are basically the same... except for the backup part:
SP1996AC said:
2. Wipe data/system/dalvik
3. Install rom
4. Install kernel
5. Flash gapps
Click to expand...
Click to collapse
If you completely backed up your CM7, then I recommend you restore your backup.
Hi all,
I'm in Gingerbread 20Q now, and I'd like to install CM9 (owain's ROM) so I have some questions:
1. I have to convert my filesystem to EXT3 before install?
2. Kernel and Gapps are baked in the Rom or I have to download/install it separately?
3. There are RIL/baseband reccomended?
4. Someone says that Camera/Video have problems, someone not... I'll be possible to take photos/video with CM9 or not?
5. Someone talk about a "full wipe", so I will lose all my photos and files if I install CM9 ?
Thank you
D.
Hi all
I installed the lastet official update ... I've to say... what a disappointment. Battery life is extremely short... so before trying go back, I think a will install CM9. Being new... may I ask some help for installation? Ok, I dowloaded NovaHD_RC24-50_fixed.zip and the kernel SuperNova-RC4.zip. May I ask some of you to explain each step an which tool I have to use?
thx in advance
Hi, i have a samsung galaxy S i9000 and i'm kinda new with it
all i want is to make it faster because it runs very slow , i've seen youtube videos about testing some games on the same phone but some of them won't even open up. i got more interested in upgrading it and started searching around on how to. So here is what i want to do:
I want to upgrade it by changing my Rom in Cyanogen 9 and kernel Devil 3. I don't even know if it is good but i'm sure its better than gingerbread.
Can some1 help me out with it , maybe post a little tutorial how to do it.
Aditional info :
-I don't want so save anything from it
-It's rooted
-Firmware version: 2.3.6
-Kernel version: 2.6.35.7-i9000XXJVU-CL851880 [email protected] #2
TheInfamous. said:
Hi, i have a samsung galaxy S i9000 and i'm kinda new with it
all i want is to make it faster because it runs very slow , i've seen youtube videos about testing some games on the same phone but some of them won't even open up. i got more interested in upgrading it and started searching around on how to. So here is what i want to do:
I want to upgrade it by changing my Rom in Cyanogen 9 and kernel Devil 3. I don't even know if it is good but i'm sure its better than gingerbread.
Can some1 help me out with it , maybe post a little tutorial how to do it.
Aditional info :
-I don't want so save anything from it
-It's rooted
-Firmware version: 2.3.6
-Kernel version: 2.6.35.7-i9000XXJVU-CL851880 [email protected] #2
Click to expand...
Click to collapse
CyanogenMod (CM) 9 is really outdated. If you want a good, fast ROM I can recommend Slimbean. It's largely based on CM. You can find more info here:
http://forum.xda-developers.com/showthread.php?t=2060374
Detailed instructions can be found in that thread and on the slimrom website.
Coming from Gingerbread you'll need to install CM10 first, otherwise you will lose your IMEI, which will render your phone unable to make or place calls. Once on CM10 you can then flash Slimbean.
Or using an newer version of CM
fizzefazze said:
CyanogenMod (CM) 9 is really outdated. If you want a good, fast ROM I can recommend Slimbean. It's largely based on CM. You can find more info here:
http://forum.xda-developers.com/showthread.php?t=2060374
Detailed instructions can be found in that thread and on the slimrom website.
Coming from Gingerbread you'll need to install CM10 first, otherwise you will lose your IMEI, which will render your phone unable to make or place calls. Once on CM10 you can then flash Slimbean.
Click to expand...
Click to collapse
well
fizzefazze said:
CyanogenMod (CM) 9 is really outdated. If you want a good, fast ROM I can recommend Slimbean. It's largely based on CM. You can find more info here:
http://forum.xda-developers.com/showthread.php?t=2060374
Detailed instructions can be found in that thread and on the slimrom website.
Coming from Gingerbread you'll need to install CM10 first, otherwise you will lose your IMEI, which will render your phone unable to make or place calls. Once on CM10 you can then flash Slimbean.
Click to expand...
Click to collapse
is this video good to follow? http://www.youtube.com/watch?v=DizY-TV1QG8
i'm about to follow the whole description in next secs
thank u guys
thanks a lot i just installed cm 10 and it runs smooth as hell .
Perfect when we could help!
So now you can try different Roms or newer versions when you want...
TheInfamous. said:
thanks a lot i just installed cm 10 and it runs smooth as hell .
Click to expand...
Click to collapse
there is something i need to know
freakymod2120 said:
Perfect when we could help!
So now you can try different Roms or newer versions when you want...
Click to expand...
Click to collapse
Like i said in the original post i wanted rom cm9 with devil 3 kernel but still didnt know what that means...( the kernel part)
Now that i got the cm10 ive searched around videos on youtube and seen lot of ppl kinda overclocking it with diferent kernel...
I want to do it like with semaphore or some kernel thing... can someone explain to me how it is done and if it is good for the phone?
Some infos:
Android version: 4.2.2
Baseband vers: I9000xxJVT
Kernel version: 3.0.76-gc0a8d45
Memory: 369 mb
Cm vers: 10.1.2-galaxysmtd
Okay different kernel i have no experience with it ,sorry...
But overclocking is available with the stock-kernel in CM 10 ...to about 1200mhz in the performance menu under your settings ...have you activate developer options and performance...do you know how to do it???
http://wiki.cyanogenmod.org/w/Doc:_developer_options
TheInfamous. said:
Like i said in the original post i wanted rom cm9 with devil 3 kernel but still didnt know what that means...( the kernel part)
Now that i got the cm10 ive searched around videos on youtube and seen lot of ppl kinda overclocking it with diferent kernel...
I want to do it like with semaphore or some kernel thing... can someone explain to me how it is done and if it is good for the phone?
Some infos:
Android version: 4.2.2
Baseband vers: I9000xxJVT
Kernel version: 3.0.76-gc0a8d45
Memory: 369 mb
Cm vers: 10.1.2-galaxysmtd
Click to expand...
Click to collapse
help
freakymod2120 said:
Okay different kernel i have no experience with it ,sorry...
But overclocking is available with the stock-kernel in CM 10 ...to about 1200mhz in the performance menu under your settings ...have you activate developer options and performance...do you know how to do it???
Click to expand...
Click to collapse
i just overclocked it to 1200mhz and zram to 18(default) and now everytime i boot it , it just freez and shuts down.... what can i do now?
TheInfamous. said:
i just overclocked it to 1200mhz and zram to 18(default) and now everytime i boot it , it just freez and shuts down.... what can i do now?
Click to expand...
Click to collapse
Your clock isnt stable go download semaphore kernel or devil kernel and flash it in recovery and try then over clocking with their kernel managers.
Sent from my GT-I9000 using xda app-developers app
well
darkknigh_t said:
Your clock isnt stable go download semaphore kernel or devil kernel and flash it in recovery and try then over clocking with their kernel managers.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
well i just got it back at default no shut downs
some Qs
sorry
TheInfamous. said:
well i just got it back at default no shut downs
Click to expand...
Click to collapse
Thats good so now if you want to speed up your phone and overclock it download semaphore or devil kernel and flash in recovery
Some Qs
darkknigh_t said:
Thats good so now if you want to speed up your phone and overclock it download semaphore or devil kernel and flash in recovery
Click to expand...
Click to collapse
Some Qs:
Do i flash semaphore kernel same way i installed ROM?
Will semaphore replace current ROM (cm10)??
Did some1 had any problems with semaphore kernel ? like bricking the phone? is it stable?
Is anyone at the current time having cm10 with smaphore kernel overclocking at 1.2ghz ?
Does Sgs i9k support the overclock stable?
TheInfamous. said:
Some Qs:
Do i flash semaphore kernel same way i installed ROM?
Will semaphore replace current ROM (cm10)??
Did some1 had any problems with semaphore kernel ? like bricking the phone? is it stable?
Is anyone at the current time having cm10 with smaphore kernel overclocking at 1.2ghz ?
Does Sgs i9k support the overclock stable?
Click to expand...
Click to collapse
You flash semaphore the same way you flashed your rom and it will replace stock cm kernel your rom will stay the same make sure you flash the right version to avoid any bricking. It makes cm run better. Overclock depends on your phone some people can overclock high some not so much. Download semaphore changer governor to sio and liveoc to 110% and set min frequenci 400Mhz. That should be enough to make it supper smooth
Sent from my GT-I9000 using xda app-developers app
---------- Post added at 12:54 AM ---------- Previous post was at 12:51 AM ----------
darkknigh_t said:
You flash semaphore the same way you flashed your rom and it will replace stock cm kernel your rom will stay the same make sure you flash the right version to avoid any bricking. It makes cm run better. Overclock depends on your phone some people can overclock high some not so much. Download semaphore changer governor to sio and liveoc to 110% and set min frequenci 400Mhz. That should be enough to make it supper smooth
EDIT: make sure after flashing to download semaphore manager from the playstore its like a control panel for semaphore where all the settings are and i repeat make sure you flash the right version for your android version and phone i9000.
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Sent from my GT-I9000 using xda app-developers app
darkknigh_t said:
You flash semaphore the same way you flashed your rom and it will replace stock cm kernel your rom will stay the same make sure you flash the right version to avoid any bricking. It makes cm run better. Overclock depends on your phone some people can overclock high some not so much. Download semaphore changer governor to sio and liveoc to 110% and set min frequenci 400Mhz. That should be enough to make it supper smooth
Sent from my GT-I9000 using xda app-developers app
---------- Post added at 12:54 AM ---------- Previous post was at 12:51 AM ----------
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Just making sure i won't brick it...
http://forum.xda-developers.com/showthread.php?t=1786220
i got 4.2.2 that means i can use the 3.0.0 semaphore version? right?
I'm asking again did anyone else did this to their Sgs i9000 with cm10 rom?
And it's 10.1.2 galaxysmtd
TheInfamous. said:
Just making sure i won't brick it... i got 4.2.2 that means i can use the 3.0.0 semaphore version? right? I'm asking again did anyone else did this to their Sgs i9000 with cm10 rom? And it's 10.1.2 galaxysmtd
Click to expand...
Click to collapse
I don't get it why do you want to flash another kernel? Aren't you happy now with smooth CM10.1x? Here on this forum are many flashing freaks who flash and overclock their phones until the device completely crashes.
CM10.1x is excellent already way it is, if you want to even improve it (first of all to get about double battery life) just upgrade it to the newest nightly version of CM10.2 tomorrow (build 20130828), it will finally have all bigger bugs fixed. Very soon, stable CM.10.2 build will be released out of this nightly. This is the thread:
http://forum.xda-developers.com/showthread.php?t=2385178
If you want to do it, just mind that the developer (pawitp) doesn't mention anymore installing gapps, so this would be the workflow from your present ROM:
Do a Nandroid Backup of your CM10.1.2 build before the upgrade!
Go to CWM recovery mode and check first in "install zip" if your zips of the CM10.2 and Gapps for 4.3 are visible on your internal SD card
Wipe data/factory reset
wipe cache
wipe dalvik cache (under "advanced")
Install the nightly ROM zip from internal sdcard using ClockworkMod Recovery
Install Gapps for CM10.2 (Android version 4.3) while still in recovery
Restore /data from Nandroid Backup (the update will wipe your /data) while still in recovery
Reboot system
The partition layout of CM10.2 (beginning from 20130816 nightly) differs of that of CM10/CM10.1. The first install will wipe your /data to switch to the new layout, but after that you may use CWM to restore/backup data of CM10/10.1/10.2 (in CWM recovery under "advanced restore" then "restore data" from your CM10.1 nandroid backup)
This way done, you should have all data, wallpaper, widgets and apps like in your CM10.1 right after the reboot. And wait until tomorrow, when the 20130828 nightly gets released. I've been using "buggy" builds (nightlies between 24 and 27 Aug) without any problems, but some people had problems with them.
can someone explain to me what is "BigMEM-Libs for Sema-Kernel 3.2.0s" . I saw it on another post .
when should I flash the BigMEM? after I flashed the rom and the kernel ?
1 more thing, can i flash cm 10.2 on stock 2.3.3 ?
ty .
Upgrade to 2.3.6 (it is a better base for the next steps) then flash CM 10.2
http://forum.xda-developers.com/showthread.php?t=2434225
So to your other question:
Semaphore is an other Kernel for different ROM like CM 10.2 and so on...you can flash it via Odin...
The Kernel reserves RAM when starting so you don`t have 512 MB RAM on your Android for apps and so on, instead only 360MB, for explample...
Semaphore-Kernel gives tou the ability to enable the Function "BigMEM" so you have more RAM becuase some drivers are not loaded at the beginning for example 720p video recording...
So when you enable BigMEM you`re camera will get FS (ForceClosings) then you need the BigMEMLibs (Libs like libOMX.so and so on) and for all that you have to use not the "normal" Semaphore-Kernel, but the Sema-Kernel "s"
Bigmem
When the kernel boots, it reserves some RAM to be used by some drivers (video, capture, JPG) for DMA (Direct Memory Access). In Linux kernel this reservation have to be done only during boot. It was found that using less reserved memory for video capture, the kernel can operate normally without issue with the only regretion that 720p video recording is not possible. Enabling this option will leave ~13MB more available RAM.
Look here my posting for more infos, links ...http://forum.xda-developers.com/showthread.php?t=2490817
Hope i can help you a little ...
royts2007 said:
can someone explain to me what is "BigMEM-Libs for Sema-Kernel 3.2.0s" . I saw it on another post .
when should I flash the BigMEM? after I flashed the rom and the kernel ?
1 more thing, can i flash cm 10.2 on stock 2.3.3 ?
ty .
Click to expand...
Click to collapse
thank you for the explanation, you were very helpful .
No Prob when you`ve questions tell us :laugh::good:
And don`t forget to hit the "thanks" button
royts2007 said:
thank you for the explanation, you were very helpful .
Click to expand...
Click to collapse
Hi there. I have a question at title and need help. Becase mini 2 is too lag and less free ram so i wonder: is there any ways to make my s6500d more smooth and fast. Thaks a lot ^^
sontran_vietnam said:
Hi there. I have a question at title and need help. Becase mini 2 is too lag and less free ram so i wonder: is there any ways to make my s6500d more smooth and fast. Thaks a lot ^^
Click to expand...
Click to collapse
Most custom roms for mini 2 like cyanogenmod does not support overclock. Will just unlock the stock processor speed 1Ghz. I said that, because if you select an higher value phone will crash or reboot.
Just stock rom can be overclocked up to 1,12 Ghz and cm9 at 1,1 Ghz.
Also brian kernel can be installed on stock rom (but camcorder will not work) and cm10.1 but wifi and camera will not work. Brian kernel have 411 mb Ram avaiable for OS.
Also, to make this phone fast you should be rooted and deodexed and rom should be zipalligned with int.d scripts. To boost OS speed use squadzone kernel. To improve rom stability flash lastest 2014 rom from samsung (branded movistar). /Or another rom, but you will also need to de-bloatware it (deleting useless apps/files)
If you need more help just tell me
Sent from my GT-S6500D using Tapatalk 2
MaDaLiNoSt said:
Most custom roms for mini 2 like cyanogenmod does not support overclock. Will just unlock the stock processor speed 1Ghz. I said that, because if you select an higher value phone will crash or reboot.
Just stock rom can be overclocked up to 1,12 Ghz and cm9 at 1,1 Ghz.
Also brian kernel can be installed on stock rom (but camcorder will not work) and cm10.1 but wifi and camera will not work. Brian kernel have 411 mb Ram avaiable for OS.
Also, to make this phone fast you should be rooted and deodexed and rom should be zipalligned with int.d scripts. To boost OS speed use squadzone kernel. To improve rom stability flash lastest 2014 rom from samsung (branded movistar). /Or another rom, but you will also need to de-bloatware it (deleting useless apps/files)
If you need more help just tell me
Sent from my GT-S6500D using Tapatalk 2
Click to expand...
Click to collapse
Oh, thaks for your help. I wonder that: is CM 10.1 stable and less lag than stock rom. And how to fix whitescreen ?
MaDaLiNoSt said:
Most custom roms for mini 2 like cyanogenmod does not support overclock. Will just unlock the stock processor speed 1Ghz. I said that, because if you select an higher value phone will crash or reboot.
Just stock rom can be overclocked up to 1,12 Ghz and cm9 at 1,1 Ghz.
Also brian kernel can be installed on stock rom (but camcorder will not work) and cm10.1 but wifi and camera will not work. Brian kernel have 411 mb Ram avaiable for OS.
Also, to make this phone fast you should be rooted and deodexed and rom should be zipalligned with int.d scripts. To boost OS speed use squadzone kernel. To improve rom stability flash lastest 2014 rom from samsung (branded movistar). /Or another rom, but you will also need to de-bloatware it (deleting useless apps/files)
If you need more help just tell me
Sent from my GT-S6500D using Tapatalk 2
Click to expand...
Click to collapse
One more question. I want to overclocked mini 2 stock rom (rooted), how could i do that ?
Thaks for your help
sontran_vietnam said:
One more question. I want to overclocked mini 2 stock rom (rooted), how could i do that ?
Thaks for your help
Click to expand...
Click to collapse
sontran_vietnam said:
Oh, thaks for your help. I wonder that: is CM 10.1 stable and less lag than stock rom. And how to fix whitescreen ?
Click to expand...
Click to collapse
1)To root mini 2 is enough to install clockworkmod recovery and reboot phone. If you're not rooted it will ask you if you want to write su (superuser) binary.
To overclock stock rom you will need to install squadzone's kernel from an custom recovery like cwm or twrp.
2) Mini 2 does not have full working custom roms like stock rom. Cyanogenmod 10.1 rom have problems with fm radio and whitescreen. Well, all mini 2 cm have that problems.
If you decided to use cm10.1 and you want to boost it , delete useless apps (not neessary apps), like voice dialer or vpn config, gmail, dev tools, and other apps that you don't use.
Also, I need to mention here that all mini 2 custom roms have a problem with camcorder performance. It will lag while you rec. a video. I noticed , the bad video performance on cm10.1 and higher like cm10.2, cm11 (games have graphical issues instead stock rom) .
Else I don't know what to do to boost cm...
Playstore promoted apps in app or ads will just clear ram, and tell you to delete useless user apps.
There are 2 kind of apps:
-user apps (installed from playstore, sdcard, ext. sdcard, adb...)
-system apps (preinstalled rom apps, like phone , internet browser..., this apps can be deleted from rom .zip , before you flash it/ or if you're rooted, download root browser and go to system/app and delete what you want.)
Just search on internet (google) squadzone kernel mini 2 s6500, and flash it.
Tell me if you don't found it. I have it saved on my sdcard, and I will upload it. :thumbup:
Sent from my GT-S6500D using Tapatalk 2
Sent from my GT-S6500D using Tapatalk 2
So if i flash that custom kernel using only for stock rom (rooted), does it have any bugs ??
And one more thing, if i dowload some game like gta vice city, play it stable on what? CM 10.1 or stock rom (rooted and overclocked)
Thaks alot
MaDaLiNoSt said:
1)To root mini 2 is enough to install clockworkmod recovery and reboot phone. If you're not rooted it will ask you if you want to write su (superuser) binary.
To overclock stock rom you will need to install squadzone's kernel from an custom recovery like cwm or twrp.
2) Mini 2 does not have full working custom roms like stock rom. Cyanogenmod 10.1 rom have problems with fm radio and whitescreen. Well, all mini 2 cm have that problems.
If you decided to use cm10.1 and you want to boost it , delete useless apps (not neessary apps), like voice dialer or vpn config, gmail, dev tools, and other apps that you don't use.
Also, I need to mention here that all mini 2 custom roms have a problem with camcorder performance. It will lag while you rec. a video. I noticed , the bad video performance on cm10.1 and higher like cm10.2, cm11 (games have graphical issues instead stock rom) .
Else I don't know what to do to boost cm...
Playstore promoted apps in app or ads will just clear ram, and tell you to delete useless user apps.
There are 2 kind of apps:
-user apps (installed from playstore, sdcard, ext. sdcard, adb...)
-system apps (preinstalled rom apps, like phone , internet browser..., this apps can be deleted from rom .zip , before you flash it/ or if you're rooted, download root browser and go to system/app and delete what you want.)
Just search on internet (google) squadzone kernel mini 2 s6500, and flash it.
Tell me if you don't found it. I have it saved on my sdcard, and I will upload it. :thumbup:
Sent from my GT-S6500D using Tapatalk 2
Sent from my GT-S6500D using Tapatalk 2
Click to expand...
Click to collapse
Could u give me that kernel. Link on intenet is died @@
sontran_vietnam said:
Could u give me that kernel. Link on intenet is died @@
Click to expand...
Click to collapse
Uploaded bellow. Thanks button? :good: :laugh:
sontran_vietnam said:
So if i flash that custom kernel using only for stock rom (rooted), does it have any bugs ??
And one more thing, if i dowload some game like gta vice city, play it stable on what? CM 10.1 or stock rom (rooted and overclocked)
Thaks alot
Click to expand...
Click to collapse
Squadzone kernel does not have bugs till MD1 PDA verdsion.
If you flash MK1 ROM, wifi will be broken. A fix for that is avaiable on dev forum.
Last summer I've tried to flash squadzone's kernel into CyanogenMod 10.1 but I had a bootloop!
MaDaLiNoSt said:
Squadzone kernel does not have bugs till MD1 PDA verdsion.
If you flash MK1 ROM, wifi will be broken. A fix for that is avaiable on dev forum.
Click to expand...
Click to collapse
thaks a lot.
In case of when i flash this kernel, after that i want to flash CM 10.1, is that just go to recovery, wipe all and flash CM10.1 or anything else?
Can u give me some ROM smooth and fast. less heavy than stock rom ?
Thanks for yoir help
Antox97 said:
Last summer I've tried to flash squadzone's kernel into CyanogenMod 10.1 but I had a bootloop!
Click to expand...
Click to collapse
squadzone kernel can be used only on stock rom.
MaDaLiNoSt said:
squadzone kernel can be used only on stock rom.
Click to expand...
Click to collapse
After flashed kernel, i cant turn on wifi ( help me please
sontran_vietnam said:
After flashed kernel, i cant turn on wifi ( help me please
Click to expand...
Click to collapse
wifi fix is here : click
direct download : click
zip is not flashable, you will need to replace that file with root explorer!
:good:
MaDaLiNoSt said:
wifi fix is here : click
direct download : click
zip is not flashable, you will need to replace that file with root explorer!
:good:
Click to expand...
Click to collapse
Thaks alot, my wifi is normal again.
sontran_vietnam said:
Thaks alot, my wifi is normal again.
Click to expand...
Click to collapse
Thanks button? :laugh:
MaDaLiNoSt said:
squadzone kernel can be used only on stock rom.
Click to expand...
Click to collapse
Yes, now I know.. I was trying 'cause I was courious lol :cyclops:
Cm10.1 without bugs
You could flash the cm10.1 improved by bleached without bugs which comes with 410mb RAM and other bugs fixed and it works fine
Davi9d said:
You could flash the cm10.1 improved by bleached without bugs which comes with 410mb RAM and other bugs fixed and it works fine
Click to expand...
Click to collapse
Yep man! I have this ROM right now and it's very stable!
Sent from my GT-S6500 using XDA Free mobile app
But you can't overclock your sgm2 if you do that you get bluescreen and reboot. For me the squadzone kernel is very awesome and smooth in games. Even in higher games im running on custom rom with squadzone kernel 1.1overclock
Sent from my GT-S6500D using XDA Free mobile app