So I wanted to FXZ back to .902 with rsd lite. I downloaded the latest Motorola USB drivers, and rsd lite 5.7, but for some reason when I start the program it won't recognize my phone is plugged in. I start it in Fastboot AP and even waited 10 min, and nothing. The only thing I have done with the phone was update to .905, root, installed safestrap, and eclipse 3.0. I'm running in unsafe mode in safestrap right now. Any suggestions? This is driving me insane, I just want to get back to stock .902.
Are you using a notification cable? Not all usb cables are created equal, maybe try with a different one.
Sent from my DROID BIONIC using Tapatalk
linuxgator said:
Are you using a notification cable? Not all usb cables are created equal, maybe try with a different one.
Sent from my DROID BIONIC using Tapatalk
Click to expand...
Click to collapse
Definitely this. I've seen way too many threads that show that RSD Lite and/or Moto devices are very picky about their USB cables. Try another one to see if it's detected.
Failing that, go peek in your device manager (Start > Run > devmgmt.msc) and see if the phone even shows up in there. You could be having larger issues with USB device detection.
linuxgator said:
Are you using a notification cable? Not all usb cables are created equal, maybe try with a different one.
Sent from my DROID BIONIC using Tapatalk
Click to expand...
Click to collapse
Omg if you were here I would kiss you. I had not even thought that the usb cable that came with the Bionic would be the issue, but sure enough I used my cable that came with my Incredible 2 and IT WORKED. thanks so much
Mine is recognized when I use the command 'lsusb', but doesn't show up on RSDLite. I will try another cord but wouldn't it make more sense that if it's being recognized it is a software issue?
psychonot said:
Mine is recognized when I use the command 'lsusb', but doesn't show up on RSDLite. I will try another cord but wouldn't it make more sense that if it's being recognized it is a software issue?
Click to expand...
Click to collapse
Which version of RSDLite are you using? There's a newer version out, 6.14 I think it is, that doesn't work all that well. Right now 5.7 is still the recommended version. The cable thing still sometimes is the issue, even if it is recognized in other modes sometimes it just doesn't work right. You can also try flashing with moto-fastboot as a command line program. There are both windows and linux versions available.
Working Atrix HD
Worked after installing ADB Driver thanks!
Still no joy
so I have a high-speed USB 2.0 cable, ADB driver displays in the Device Manager, and Rsd Lite 6.15 still does not display my Moto X.
Any other suggestions?
Droid razr m - can't flash/fix with rsd lite 5.7
I can't get my Droid Razr M off the boot screen, endless boot loop happening with the startup screen.
I downloaded the RSD Lite 5.6 (then 5.7) and tried both. Neither is recognizing my device.
I downloaded the AdbDriverInstaller.exe for Android. Did not even recognize my device - the device is plugged in, I'm looking at the AP Fastboot Flash Mode (S) on my phone. Says Device is Locked (whatever that means). Status Code: 0. Transfer Mode: USB Connected. So it recognizes that there is a USB plugged into it.
I ran ALL of these firmware versions from this website through the RSD Lite - sbf . droid - developers . org - NONE are working.
I keep getting Status: Failed Flashing Process: 1/19 flash partition "gpt_main0.bin" -> Phone returned FAIL.
I saw some forums that said within the actual firmware XML file, to delete these lines of code, so I did (note: I tried running them before and after the file edit):
<step operation="getvar" var="max-download-size" />
<step operation="oem" var="fb_mode_set" />
<step operation="oem" var="fb_mode_clear" />
SOMEONE HELP!
Droid Razr Maxx
amandafrat said:
I can't get my Droid Razr M off the boot screen, endless boot loop happening with the startup screen.
I downloaded the RSD Lite 5.6 (then 5.7) and tried both. Neither is recognizing my device.
I downloaded the AdbDriverInstaller.exe for Android. Did not even recognize my device - the device is plugged in, I'm looking at the AP Fastboot Flash Mode (S) on my phone. Says Device is Locked (whatever that means). Status Code: 0. Transfer Mode: USB Connected. So it recognizes that there is a USB plugged into it.
I ran ALL of these firmware versions from this website through the RSD Lite - sbf . droid - developers . org - NONE are working.
I keep getting Status: Failed Flashing Process: 1/19 flash partition "gpt_main0.bin" -> Phone returned FAIL.
I saw some forums that said within the actual firmware XML file, to delete these lines of code, so I did (note: I tried running them before and after the file edit):
<step operation="getvar" var="max-download-size" />
<step operation="oem" var="fb_mode_set" />
<step operation="oem" var="fb_mode_clear" />
SOMEONE HELP!
Click to expand...
Click to collapse
I am having the same problem with my Droid RAZR Maxx (XT912). I rooted it, then flashed CM 10.1.2. with Safestrap. Since then, I've had all
sorts of trouble. I've been trying to get it back to the factory ROM, but me being a total noob at the time, somehow made the mistake of backing
up my factory ROM in a CWM format instead of TWRP, meaning that I never could access it from Safestrap, and Safestrap would not uninstall
no matter what I tried. This was a long time ago, I have been researching all over the interwebs to fix my problem since. I tweaked my phone to
the point that it worked well for everything I needed, even though I was still stuck with CM.
It worked just fine... Until now. My phone went dead one day, and when I tried to charge it and reboot, it woke up stuck in bootloop. I have no idea why it decided to get stuck in bootloop, but I need to get it back ASAP. I have done hours and hours of research, set up adb and RSD Lite v5.6, got all the driver software I needed, and then found the firmware to take it back to Android v 4.0.4. My problem is that neither adb, nor RSD Lite will recognize my device. My computer recognizes the device as a Mot single adb interface, but that is the only recognition I get from my computer. My phone is saying the same thing as the quoted post above
Phone is Locked, Status Code: 0, Transfer Mode: USB Connected.
I have tried a few different USBcables, but I don't have the original factory cable from Motorola because my dog decided she wanted it more. I have an LG factory cable, but it still won't work with that.
tl;dr: My phone (Motorola droid RAZR Maxx XT912) is stuck in bootloop, adb and RSD Lite won't recognize it, but my computer will.
I'm in need of a wee bit of assistance, does anyone have any advice to offer?
Anonymous Assassin said:
I am having the same problem with my Droid RAZR Maxx (XT912). I rooted it, then flashed CM 10.1.2. with Safestrap. Since then, I've had all
sorts of trouble. I've been trying to get it back to the factory ROM, but me being a total noob at the time, somehow made the mistake of backing
up my factory ROM in a CWM format instead of TWRP, meaning that I never could access it from Safestrap, and Safestrap would not uninstall
no matter what I tried. This was a long time ago, I have been researching all over the interwebs to fix my problem since. I tweaked my phone to
the point that it worked well for everything I needed, even though I was still stuck with CM.
It worked just fine... Until now. My phone went dead one day, and when I tried to charge it and reboot, it woke up stuck in bootloop. I have no idea why it decided to get stuck in bootloop, but I need to get it back ASAP. I have done hours and hours of research, set up adb and RSD Lite v5.6, got all the driver software I needed, and then found the firmware to take it back to Android v 4.0.4. My problem is that neither adb, nor RSD Lite will recognize my device. My computer recognizes the device as a Mot single adb interface, but that is the only recognition I get from my computer. My phone is saying the same thing as the quoted post above
Phone is Locked, Status Code: 0, Transfer Mode: USB Connected.
I have tried a few different USBcables, but I don't have the original factory cable from Motorola because my dog decided she wanted it more. I have an LG factory cable, but it still won't work with that.
tl;dr: My phone (Motorola droid RAZR Maxx XT912) is stuck in bootloop, adb and RSD Lite won't recognize it, but my computer will.
I'm in need of a wee bit of assistance, does anyone have any advice to offer?
Click to expand...
Click to collapse
This is a really late reply, but I just went through this. Try a different USB port on your PC. My usb 3.0 port wouldnt recognize my Photon Q
boxes said:
This is a really late reply, but I just went through this. Try a different USB port on your PC. My usb 3.0 port wouldnt recognize my Photon Q
Click to expand...
Click to collapse
Well, I actually fixed this a long time ago, but thanks for the suggestion. I ended up using mattlgroff's Droid RAZR Utulity to restore my phone to factory default. If anyone ever has any trouble with your RAZR, try using that, it'll make your life a lot easier.
If you don't mind, please swing by and give Matt some thanks, he really deserves it.
same issue with an XT926
So, i would use the utility mentioned above, except it's for a xt912, and i have the xt926. I've tried RSD Lite 6.15 and 5.7 and both with different USB cables. I downloaded ADB and the SDK Tool Kit and went through the instructions at visualgdb.com[slash]KB[slash]usbdebug-manual (sorry for the '[slash]'... noob not allowed to post links) to get "a USB driver" to install when i connect the phone. I've also downloaded a ROM file, VZW_XT926_4.4.2-KDA20.62-15.1_1FF.xml , but i've been to so many sites at this point, i can't remember where i got that file. When i open/decompress this file in RSD Lite, the software version description has 'VANQUISH" in the name. If I attempt to "Safely Remove Hardware and Eject Media", then the phone shows up as "Fastboot VANQUISH S". So i think i have the right file.
Also, i downloaded ADB and opened it. It launched a command prompt. I used the command "adb devices" to list my phone and it returns nothing.
The phone is in the AP Fastboot mode (with "Device is LOCKED. Status Code: 0" and "Transfer Mode: USB Connected", yada yada yada).
Anybody got any further ideas? Is this easier done in Linux?
Change to USB 2.0
Change to USB 2.0
I wanted to install CWM 6.0.3.3 on my gm 2 but instead after odin finishes. it auto-reboots ( i forgot to un plug the cable) so instead i turn off the phone. go into download mode. then try again. but it was bricked. i flashed with my stock rom. its back to normal. so i tried to root again.
i got a error:
usb_read() transaction failed
odin: oops!
please help me. i desperately want try thewhisp cm10.1 rom for gm2
sounds like there is a problem with the usb.... drivers are ok as it said transaction failed, means odin can still find the mobile.
EDIT: try odin again but use a different usb port, if that fails then try different usb cable.
pryerlee said:
sounds like there is a problem with the usb.... drivers are ok as it said transaction failed, means odin can still find the mobile.
EDIT: try odin again but use a different usb port, if that fails then try different usb cable.
Click to expand...
Click to collapse
it worked.. i did it by changing ports, closing kies again and again and restore stock rom.
Ok So was running my custom rom and decided to return it to stock. PC odin keeps saying fail when I try to flash standard ICS Rom and then whenever I try to retry it my PC keeps saying USB Device is not recognized?? I uninstalled Samsung Kies and Samsung USB driver and reinstalled but still have the same problem?
My phone can get into download mode and also if I simply try to turn it on its says Firmware Upgrade encountered an issue, Please select recovery mode and try in Kies & try again.
The standard rom I am trying to flash is called: N7000XXLQ2_N7000XXLPT_N7000XEULP4_HOME.tar.md5
And the version of PC Odin is Odin3 v3.04
Can anyone help as I am stuk at work without a phone
Forgot to say when I put it in download mode and connect the usb cable I get a pop up on my pc saying USB Device is not recognized.
it is due to bad usb connection
1 change usb cable.. may b it getting shorting inside ,, on rx tx
2 change usb port. do not relay on front cabinate usb if you are not using laptop.. use on board usb
after this two things should change or your motherboard is not producing enough power for device
try on another pc.. ofcourse of frend..
regards
skhan
All sorted had to run the Samsung USB Drivers as an Administrator and it all worked fine Phew!
wow........ ...... .......
new thing heard from you....
good work in technical field.. im impressed .... go ahead
Solution here on post No 6
So, trying to sort my damn phone out and then leaving it alone.
Upgrading to official 4.1.2
Using RSD lite 6.1.4
I managed to get motogp to flash then it froze with nothing further going on.
Edited the xml to leave only the system and cdrom files. The system uses multiflash due to the large size.
First two parts go fine then on the third it freezes on download.
Ideas?
So this happens when flashing anything over 100mb via fastboot.
Finally back on my backup of official 404 but i have a feeling some items from the official 4.1 are still there.
Mainly system files that are from jb.
My smsc number keeps dropping and i can't change my network carrier.
My only temporary resolution for sending texts is to reboot which gives me about 3 minutes before the smsc disappears again.
/help
Sent from my XT890 using XDA Premium 4 mobile app
Use RSD-LITE 6.1.5. I have read in another forum, only RSD-LITE 6.1.5 will work, when u use it with win7.
Never tried 6.1.4 but can confirm that 6.1.5 works perfect on Win7 ultimate 64 bit
ICuaI said:
Use RSD-LITE 6.1.5. I have read in another forum, only RSD-LITE 6.1.5 will work, when u use it with win7.
Never tried 6.1.4 but can confirm that 6.1.5 works perfect on Win7 ultimate 64 bit
Click to expand...
Click to collapse
Thought 6.1.4 was the latest! Damn. Will give .5 a try.
Found a dl and guide here forum.xda-developers.com/showthread.php?t=2446515
Sent from my XT890 using XDA Premium 4 mobile app
So I bricked it, temporary of course. Black screen, green LED
How I did this;
Was stuck unable to erase anything, suspect - 4.1 files as I thought. Boot system thinks I have 4.1 but I have 404 due to the failed data write.
Flashed original 404 files as follows via the latest fastboot which lets you do multi on large files
radio
bos
gpt
Rebooted back to recovery, had a cr32 error. Thought screw it.
flashed boot and recovery
rebooted back
erased cdrom and system
flashed cdrom - fine
flashed system - stuck on the third write
rebooted, erased system
flashed dnx and ifwi - Now these screwed it over due to the 4.1 data
Rebooted, black screen, green LED
Used http://forum.xda-developers.com/showthread.php?t=2184877
Basically installed the driver, followed prompt turning on phone when it said and clicked ok
Installed the other software, wasn't sure if it needed it.
Dropped my dnx and ifwi files from 4.1 in there
Let the phone vibrate which signifies it's back off.
Ran the bat file (before turning the phone on)
Let it find no phone, turned phone on and it did it's magic
Turned phone on with vol key - held and let go of power soon as it vibrated and viola - back in bootloader
So, still pretty much at square one although I'm slowly downloading the 4.1 FW again to re-try with RSD lite 6.1.5
SOLVED!!!!!!!!!!!!!!!!!
USB 3 port. FFS.
Schoolboy error.
Plugged into my lesser USB 2 I didn't know I had and fastbooted the system and it went through, went back to RSD 6.1.5 and the whole thing went through with no problems, took about 9 minutes.
FINALLY ON OFFICIAL JB
SO, try other USB ports, latest driver and RSD Lite 6.1.5
**** yeah... I'm tempted to flash CWM and try a custom rom now to see if that resolves that issue with bootloops when flashing over 404 via cwm/twrp
Maybe in a week or two after a well needed holiday
Nice man, good that it is solved!!
Sent from my GT-P5110 using XDA Premium HD app