Related
I flashed my stock. 2.1 Milestone (rooted) preparing it for froyo. Apparently the .sbf was corrupt or wrong;
GOT_TELUS_2_2_1FULL.sbf
I am told the correct sbf is;
BL_9078_GOOD_sholes_HS_Consumer_replacer.sbf\BL_9078_umts_sholes_HS_Consumer_replacer.sbf.
- Now It’s stuck in bootloader mode
-RSD Lite seems to recognize phone but the “Start” button remains disabled, grey, it can’t be pushed (with either .sbf file.)
-I’ve loaded a fresh copy of RSD Lite v5.0 (previously had v4.7). Both behave the same; the start button is disabled.
I want to save this phone and am looking for alternative tools or methods to ultimately flash the proper .sbf…Help please!!!
BOOTLOADER SCREEN BELOW
PHP:
Bootloader
90.74
Err:A5,69,35,00,27
Battery OK
OK to Program
Transfer Mode:
USB
RSD LITE SCREEN BELOW
PHP:
IMEI/ESN/MEID: N / A
Technology: N / A
Software Version: N / A
Flex Version: N / A
Bootloader Version: v0x009074
DRM Version: N / A
AP Die ID: 06a0010c60720304000000000400
BP Die ID: 0000000000000000000000000000
AP Public ID: 4bd4854c5cb58e173025f2751e09441b44fa681f
BP Public ID: 0000000000000000000000000000000000000000
-----------------------------------------------------------------------
Model Port No Port Type IMEI/ESN/MEID Status
S Flash OMAP3430 1 USB N/A connected
(I’ve successfully flashed my other Millstone an many other phones)
Any help is greatly appreciated,
PK
The greyed out start button is an error in RSD. What you want to do is rename that really long sbf file to a one letter name such as a.sbf
If you are planning on rooting, you can flash the VR from android.doshaska.net/rootable but I would not try it until those bootloader errors get corrected. Be careful on the site I gave you, one sbf is for bootloader version 90.78, the other is for yours (90.74)
Hope that helped.
Sent from my Milestone using XDA Premium App
Thanks skadude66
That kinda worked, I renamed it “A” and also had to put it in the root on my C; drive. The button worked.
The bad news is it wouldn’t take. I got the following error message:
PHP:
Device Properties
EMEI/ESN: N / A
Technology: N / A
Software Version: N / A
Flex Version: N / A
Boot Version: N / A
DRM Version: N / A
PHP:
Status
Failed flashing process Failed flashing process (0x7100); phone connected.
(I also discovered by hunting around that I almost tried to flash the wrong ver of.sbf, 90.78 instead of 90.74. It didn’t make any difference though.) Failed.
Regards, PK
pk2 said:
Thanks skadude66
That kinda worked, I renamed it “A” and also had to put it in the root on my C; drive. The button worked.
The bad news is it wouldn’t take. I got the following error message:
PHP:
Device Properties
EMEI/ESN: N / A
Technology: N / A
Software Version: N / A
Flex Version: N / A
Boot Version: N / A
DRM Version: N / A
PHP:
Status
Failed flashing process Failed flashing process (0x7100); phone connected.
(I also discovered by hunting around that I almost tried to flash the wrong ver of.sbf, 90.78 instead of 90.74. It didn’t make any difference though.) Failed.
Regards, PK
Click to expand...
Click to collapse
Try using the latest version of Motorola USB drivers, your phone might not be completely recognized.
EDIT: http://androidforums.com/droid-all-...hing-process-0x7100-rsd-lite.html#post1274587
I used that to help me out when I had that error as well. It worked for me, it should for you as well.
Thanks. good read so far. Nice to know I'm not alone and there may be a way. I think the trick when I did this on my other Milestone was copying the sbf here there and everywhere. Haven't updated the latest usb drivers.
Regards, PK
Well crap,
I downloaded v.5 moto usb drivers from moto. One self installing program. RSD doesn't see the phone at all now. Tried twice. Uninstalled drivers with program "total uninstaller" (normally very good), still nothing in RSD.
Seem to recall having to manually install either HTC or moto drivers. Guess I got to hunt around and find out what the moto trick is.
crap.
Regards. PK
Finally new Moto Drivers (v5.0) installed, start button in RSD "start" button works but when pushed, RSD reads "Flash Failed"
Any help? PK
try RSD v4.7, maybe its the RSD problem.
Have you check out your system hardware manager to see if the Milestone was recognized completely?
Hi,
i got same problem 2 days ago.
at my point i just had to install a new rom.
if you get in Open Recovery try to install miui oder CM.
I got the same error when i tried to install CM7. So I installed MIUI and voila everything worked.
Thanks for the reply's!
I tried all of above and it still "failed" to flash.
I can't get into open recovery or the stock "recovery" utility (this phone was stock when this all started).
The phone shows up in "devices and printers" as "unspecified-S flash omap3430a" not as Milestone
Regards, PK
I was having a similar problem. How are you getting into the bootloader? I was using the volume button.
For whatever reason, when I got into the bootloader using the D-pad, RDS Lite found the phone.
I still can't seem to flash anything properly, but it found it.
It pretty much jumps straight to boot loader mode all by itself after powering up. No button combination takes me anywhere but the boot-loader. There's no way to get out of it either.
Thanks, pk
Stuck in boot loader milestone usb drivers
Man I've tried all of above.
The one thing someone mentioned is "is the phone was recognized by win764" . Not really, It only shows up Under "Devices & printers" as "unspecified":
S Flash OMAP3430
I have tried every Moto. USB Driver set I can find. None do anything different. I can not find any manually installable drivers.
(My working hacked milestone_eu shows up as "unspecified" ) to.
Makes me think Maybe my drivers ar screwed. How can I put them in manually without an install a pckage I wonder. Anyone had this prob?
I can't do anything with the either phone, from the computer, when tied together with USB (I.E. access sd card, portal, etc.)
Thanks PK
bump -please
Just to clarify, you have two Milestone's, one is stuck in bootloader mode, the other works. Connecting either to your computer show 'unspecified'. Is that correct?
First, the bootloader version doesn't matter, I've had 90.73, 90.74 and 90.78 on my milestone at diferent times, doesn't make any diference.
The error code you got in bootloader mode (ending in 27) means one of the signed partitions failed the signature check, probably the result of a bad flash. Reflashing usually fixes that.
Your problem sounds like a problem with your USB on your PC, either drivers or a hardware problem (most likely drivers). Fixing your pc should allow you to reflash your milestone correctly.
When connecting a Milestone in bootloader mode to RSD lite, RSD cannot extract the IMEI info etc, the display you pasted is what I would expect when connecting in bootloader mode. If you connect to RSD when the Milestone is booted up (running android), it will show the IMEI etc. All you need to check is that RSD says its connected and its usually ready to flash..
Things you can try:
1: Try flashing from another computer
2: Dual boot Ubuntu on your PC, then try flashing with sbf_flash (google it), no additional drivers are needed, should work straight out the box.
3: Uninstall EVERYTHING on your pc from motorola, then in system/device manager uninstall all the windows USB drivers, reboot and let windows reinstall the USB drivers, then try re-installing the motorola USB drivers and RSD lite.
4: Try a diferent USB cable, also try a diferent USB port. Connect directly to the computer, do not use a USB hub.
Hope this helps.
Big problem.
I had CM7 #107 installed, flashed http://forum.xda-developers.com/showthread.php?t=1223846 to OC and fix a few things. first couple of days were okay, now phone reboot when ever and after reboot LG home crashes. so i tried to install a old recovery CM recovery, i had three and none of them worked.
I first cleared both caches and then did recovery. and nothing. cant access the LG recovery screen (with battery out, screen just flashes and loops) and now after flashing a stock rom via this link: http://forum.xda-developers.com/showthread.php?t=1021554, now i cant access either LG recovery or CM recovery as the last flashed deleted it.
Any one have any tricks or ANYTHING i can try. i wana revert back to STOCK! COMPLETLY STOCK. HELP guys im outta options.
UPDATE:
I think i bricked the phone, not sure how, but, cant access any recovery functions. cant even get teh S/W menu, it just loops. if i power on the phone the LG screen is just there, bottom menu buttons light up when i touch but no function. Also when i plug in USB computer makes a sound that i plugged it in but, LG software or any flash software cannot see the device. NEED HELP.
no one has any idea what i can try?
Search for the nvflash. I thought I bricked mine to, but nvflash helped me out.
Sent from my Optimus 2X using Tapatalk
i tried to use the nvflash tool but i cant get to the APX mode, when i hold both volume buttons and after connect usb cable, i hear the computer recoginizes that something connects, after i use the nvflash.exe --sync which comes up, but after i try nvflash.exe --dl bootloader.bin, it just hangs, it just says NVFLASH started, i waited 15-20 min and nothing.
try smartflash
I had some problems with Win7 x64 a couple of times. Have you tried with another computer?
Sent from my Optimus 2X using Tapatalk
UPDATE:
Using Smartflash -- how do you install rom using this program. i thought this program is only for baseband updating
Try this: http://forum.xda-developers.com/showthread.php?t=1229407
It includes the drivers for NVFlash, which I assume you're currently missing.
^^ thanks but i cant use NVflash, im in APX mode and i'm able to sync using the NVFLASH --sync command, but when i try to BL a file it just hangs on NVFLASH STARTING, i leave it for a while and nothing happens.
That's happened to me before, I tried a few times and it eventually worked.
i use nvflash.exe --bl fastboot.bin correct?
If you're talking about the link I gave you, use the batch file, it handles the command for you.
If you want the actual command, edit the batch file and c'n'p it from there
i edited the batch file so it only does the internal flash, all i get is "nvflash started", this suppose to take a while?
** i know the nvflash is working or supposedly, cause when i disconnect the cable i get an error in command.
No, it should be near enough instant if it's going to work.
vtracer20 said:
^^ thanks but i cant use NVflash, im in APX mode and i'm able to sync using the NVFLASH --sync command, but when i try to BL a file it just hangs on NVFLASH STARTING, i leave it for a while and nothing happens.
Click to expand...
Click to collapse
There is a certian flag you need to run commands with, if your not running them as the first command. Try looking at nvflash --help
UPDATE: IT WORKED!!!, went home, plugged everything in, and on first try it worked using the .bat file. Now i have cwm recovery.
I'll upload the stock boot rom onto an external and flash using recovery. wffffuuu, thanks guys.
So I wanted to FXZ back to .902 with rsd lite. I downloaded the latest Motorola USB drivers, and rsd lite 5.7, but for some reason when I start the program it won't recognize my phone is plugged in. I start it in Fastboot AP and even waited 10 min, and nothing. The only thing I have done with the phone was update to .905, root, installed safestrap, and eclipse 3.0. I'm running in unsafe mode in safestrap right now. Any suggestions? This is driving me insane, I just want to get back to stock .902.
Are you using a notification cable? Not all usb cables are created equal, maybe try with a different one.
Sent from my DROID BIONIC using Tapatalk
linuxgator said:
Are you using a notification cable? Not all usb cables are created equal, maybe try with a different one.
Sent from my DROID BIONIC using Tapatalk
Click to expand...
Click to collapse
Definitely this. I've seen way too many threads that show that RSD Lite and/or Moto devices are very picky about their USB cables. Try another one to see if it's detected.
Failing that, go peek in your device manager (Start > Run > devmgmt.msc) and see if the phone even shows up in there. You could be having larger issues with USB device detection.
linuxgator said:
Are you using a notification cable? Not all usb cables are created equal, maybe try with a different one.
Sent from my DROID BIONIC using Tapatalk
Click to expand...
Click to collapse
Omg if you were here I would kiss you. I had not even thought that the usb cable that came with the Bionic would be the issue, but sure enough I used my cable that came with my Incredible 2 and IT WORKED. thanks so much
Mine is recognized when I use the command 'lsusb', but doesn't show up on RSDLite. I will try another cord but wouldn't it make more sense that if it's being recognized it is a software issue?
psychonot said:
Mine is recognized when I use the command 'lsusb', but doesn't show up on RSDLite. I will try another cord but wouldn't it make more sense that if it's being recognized it is a software issue?
Click to expand...
Click to collapse
Which version of RSDLite are you using? There's a newer version out, 6.14 I think it is, that doesn't work all that well. Right now 5.7 is still the recommended version. The cable thing still sometimes is the issue, even if it is recognized in other modes sometimes it just doesn't work right. You can also try flashing with moto-fastboot as a command line program. There are both windows and linux versions available.
Working Atrix HD
Worked after installing ADB Driver thanks!
Still no joy
so I have a high-speed USB 2.0 cable, ADB driver displays in the Device Manager, and Rsd Lite 6.15 still does not display my Moto X.
Any other suggestions?
Droid razr m - can't flash/fix with rsd lite 5.7
I can't get my Droid Razr M off the boot screen, endless boot loop happening with the startup screen.
I downloaded the RSD Lite 5.6 (then 5.7) and tried both. Neither is recognizing my device.
I downloaded the AdbDriverInstaller.exe for Android. Did not even recognize my device - the device is plugged in, I'm looking at the AP Fastboot Flash Mode (S) on my phone. Says Device is Locked (whatever that means). Status Code: 0. Transfer Mode: USB Connected. So it recognizes that there is a USB plugged into it.
I ran ALL of these firmware versions from this website through the RSD Lite - sbf . droid - developers . org - NONE are working.
I keep getting Status: Failed Flashing Process: 1/19 flash partition "gpt_main0.bin" -> Phone returned FAIL.
I saw some forums that said within the actual firmware XML file, to delete these lines of code, so I did (note: I tried running them before and after the file edit):
<step operation="getvar" var="max-download-size" />
<step operation="oem" var="fb_mode_set" />
<step operation="oem" var="fb_mode_clear" />
SOMEONE HELP!
Droid Razr Maxx
amandafrat said:
I can't get my Droid Razr M off the boot screen, endless boot loop happening with the startup screen.
I downloaded the RSD Lite 5.6 (then 5.7) and tried both. Neither is recognizing my device.
I downloaded the AdbDriverInstaller.exe for Android. Did not even recognize my device - the device is plugged in, I'm looking at the AP Fastboot Flash Mode (S) on my phone. Says Device is Locked (whatever that means). Status Code: 0. Transfer Mode: USB Connected. So it recognizes that there is a USB plugged into it.
I ran ALL of these firmware versions from this website through the RSD Lite - sbf . droid - developers . org - NONE are working.
I keep getting Status: Failed Flashing Process: 1/19 flash partition "gpt_main0.bin" -> Phone returned FAIL.
I saw some forums that said within the actual firmware XML file, to delete these lines of code, so I did (note: I tried running them before and after the file edit):
<step operation="getvar" var="max-download-size" />
<step operation="oem" var="fb_mode_set" />
<step operation="oem" var="fb_mode_clear" />
SOMEONE HELP!
Click to expand...
Click to collapse
I am having the same problem with my Droid RAZR Maxx (XT912). I rooted it, then flashed CM 10.1.2. with Safestrap. Since then, I've had all
sorts of trouble. I've been trying to get it back to the factory ROM, but me being a total noob at the time, somehow made the mistake of backing
up my factory ROM in a CWM format instead of TWRP, meaning that I never could access it from Safestrap, and Safestrap would not uninstall
no matter what I tried. This was a long time ago, I have been researching all over the interwebs to fix my problem since. I tweaked my phone to
the point that it worked well for everything I needed, even though I was still stuck with CM.
It worked just fine... Until now. My phone went dead one day, and when I tried to charge it and reboot, it woke up stuck in bootloop. I have no idea why it decided to get stuck in bootloop, but I need to get it back ASAP. I have done hours and hours of research, set up adb and RSD Lite v5.6, got all the driver software I needed, and then found the firmware to take it back to Android v 4.0.4. My problem is that neither adb, nor RSD Lite will recognize my device. My computer recognizes the device as a Mot single adb interface, but that is the only recognition I get from my computer. My phone is saying the same thing as the quoted post above
Phone is Locked, Status Code: 0, Transfer Mode: USB Connected.
I have tried a few different USBcables, but I don't have the original factory cable from Motorola because my dog decided she wanted it more. I have an LG factory cable, but it still won't work with that.
tl;dr: My phone (Motorola droid RAZR Maxx XT912) is stuck in bootloop, adb and RSD Lite won't recognize it, but my computer will.
I'm in need of a wee bit of assistance, does anyone have any advice to offer?
Anonymous Assassin said:
I am having the same problem with my Droid RAZR Maxx (XT912). I rooted it, then flashed CM 10.1.2. with Safestrap. Since then, I've had all
sorts of trouble. I've been trying to get it back to the factory ROM, but me being a total noob at the time, somehow made the mistake of backing
up my factory ROM in a CWM format instead of TWRP, meaning that I never could access it from Safestrap, and Safestrap would not uninstall
no matter what I tried. This was a long time ago, I have been researching all over the interwebs to fix my problem since. I tweaked my phone to
the point that it worked well for everything I needed, even though I was still stuck with CM.
It worked just fine... Until now. My phone went dead one day, and when I tried to charge it and reboot, it woke up stuck in bootloop. I have no idea why it decided to get stuck in bootloop, but I need to get it back ASAP. I have done hours and hours of research, set up adb and RSD Lite v5.6, got all the driver software I needed, and then found the firmware to take it back to Android v 4.0.4. My problem is that neither adb, nor RSD Lite will recognize my device. My computer recognizes the device as a Mot single adb interface, but that is the only recognition I get from my computer. My phone is saying the same thing as the quoted post above
Phone is Locked, Status Code: 0, Transfer Mode: USB Connected.
I have tried a few different USBcables, but I don't have the original factory cable from Motorola because my dog decided she wanted it more. I have an LG factory cable, but it still won't work with that.
tl;dr: My phone (Motorola droid RAZR Maxx XT912) is stuck in bootloop, adb and RSD Lite won't recognize it, but my computer will.
I'm in need of a wee bit of assistance, does anyone have any advice to offer?
Click to expand...
Click to collapse
This is a really late reply, but I just went through this. Try a different USB port on your PC. My usb 3.0 port wouldnt recognize my Photon Q
boxes said:
This is a really late reply, but I just went through this. Try a different USB port on your PC. My usb 3.0 port wouldnt recognize my Photon Q
Click to expand...
Click to collapse
Well, I actually fixed this a long time ago, but thanks for the suggestion. I ended up using mattlgroff's Droid RAZR Utulity to restore my phone to factory default. If anyone ever has any trouble with your RAZR, try using that, it'll make your life a lot easier.
If you don't mind, please swing by and give Matt some thanks, he really deserves it.
same issue with an XT926
So, i would use the utility mentioned above, except it's for a xt912, and i have the xt926. I've tried RSD Lite 6.15 and 5.7 and both with different USB cables. I downloaded ADB and the SDK Tool Kit and went through the instructions at visualgdb.com[slash]KB[slash]usbdebug-manual (sorry for the '[slash]'... noob not allowed to post links) to get "a USB driver" to install when i connect the phone. I've also downloaded a ROM file, VZW_XT926_4.4.2-KDA20.62-15.1_1FF.xml , but i've been to so many sites at this point, i can't remember where i got that file. When i open/decompress this file in RSD Lite, the software version description has 'VANQUISH" in the name. If I attempt to "Safely Remove Hardware and Eject Media", then the phone shows up as "Fastboot VANQUISH S". So i think i have the right file.
Also, i downloaded ADB and opened it. It launched a command prompt. I used the command "adb devices" to list my phone and it returns nothing.
The phone is in the AP Fastboot mode (with "Device is LOCKED. Status Code: 0" and "Transfer Mode: USB Connected", yada yada yada).
Anybody got any further ideas? Is this easier done in Linux?
Change to USB 2.0
Change to USB 2.0
I can't get into clockworkmod anymore, the custom recovery is back. And on top of that I can't get any computer or cord to access my phone.
I had BO 2.0.1 for a while and at some point during this it stopped being able to connect USB to a computer. I tried uninstalling drivers, reinstalling, different cords, different computers, etc. Phone never recognized computer. This didnt matter much as my phone sucks and 4G works so I can get files and back up files that way. I flashed back to stock using my original recovery and made a few tweaks. This worked for a while but phone OTA updated (forgot to freeze that part). Now clockworkmod seems to be gone and I have problems, want to fix crap because OTA mostly failed but messed some stuff up and I cant get into clockworkmod or try to use AIO to reinstall it because USB charges but doesn't sync with a computer. I still have root access though.
Any suggestions? ... (cursing revo, can't wait till upgrade, have regretted this phone since day 2).
betatest3 said:
You can just put the SD card in a computer and download a ROM and flash it in stock recovery.
EDIT: how do you know you still have root access if you cant access your phone via USB or CWM
If you cant use stock recovery then your just screwed.
Click to expand...
Click to collapse
Not sure I understand. I have plenty of ROM's on my SD card. Either I don't know what I'm doing (which I don't) or the stock recovery for LG Revo does not allow flashing anything to my knowledge. It only wipes and factory restores.
betatest3 said:
Ok so if you cant get new ROM via stock recovery and cant get it recognised via USB then you should get a new device.
Click to expand...
Click to collapse
Yeah, definitely the plan. Just trying to buy some time until then. So is there any way to install CWM to my phone without using a computer? Can I just replace the system recovery files with CWM files?
Try this
http://forum.xda-developers.com/showpost.php?p=29636513&postcount=332
You can manually install clockwork this way.
I.M.famous XMAN said:
Try this
http://forum.xda-developers.com/showpost.php?p=29636513&postcount=332
You can manually install clockwork this way.
Click to expand...
Click to collapse
I can't find a link for the file, just AIO when I search. Do you have a file link for CWM?
***Edit: wait, I found the original post finally. I just needed to hang in a bit longer. http://forum.xda-developers.com/showthread.php?t=1121952
hopefully this works, thx famous
If you download Rom manager from the play store you can install cwm with it. Should be the easiest way. Just make sure to select the revo. I wouldn't suggest cwm touch either.
Sent from my VS910 4G using xda app-developers app
and bricked! even better than before. Any suggestions?
When phone boots LG logo then it reads:
[407] Fsatboot mode started
[520] USB init ept @ 0x3e000
[620] smem_read_alloc_entry Type : 402
[670] smem_read_alloc_entry Size Read 1816
[720] smem_read_alloc_entry Size Passed 1816
[780] smem ram ptable found: ver: 0 lens: 6
[830] fastboot_init()
[890] Fastboot maximum download size : 450 MBytes
[960] udc_start()
I have tried holding power and down volume, selecting wipe data, returns to text seen above.
**** Edit: found solution to fastboot IF my phone could recognize PC.
http://forum.xda-developers.com/showthread.php?t=1088046
Had the same problem
So I had the same problem, I may be a little late but I found a way to fix it
I had the same problem when the OTA came out, I was rooted with CWM but when the OTA tried to update I lost CWM but remained rooted and for the better part of a month could not get my computer to do anything but charge the phone when plugged in via USB. heres what I did and it worked for me
1. removed battery and sd card overnight (I think the device had to be void of any electricity to fully clear the ram)
2. plugged the phone in and rebooted (computer recognized it)
3. used LGNPST to install ZV9
4. it still kept root (which I thought was weird)
5. did a factory reset
6. lost root and went to stock zv9
7. did the OTA update to zv10
8. used the AIO to reroot and reinstall cwm
9. reinstalled BO
10. watched magic happen
hope it helps, I am by no means an expert just thought i'd share
my revo says:
fastboot mode started
udc.start()
-- suspend --
-- reset --
-- portchange --
-- reset --
-- portchange --
but when i try to follow instructions from http://forum.xda-developers.com/showthread.php?t=1088046
i ran fastboot erase recovery and cmd just says "waiting on device"
i think i need the fastboot drivers but I cannot find them anywhere. any help??
Hi Guys!
I was just regular using my phone for the last few months and then suddenly yesterday it decided to get crazy. First the green light was blinking and I couldn't acess my cellphone, so I rebooted and then it all started.
It stops at the Motorola logo.
I can acess the fastboo flash mode, tried to factory reset or either recovery, but once again stops at the same motorola screen
If I turn if off, I can see the charging status of the phone.
I know nothing about flashing, I've looked around and my XT890 it's a retail version, but I don't know what to download and such. And the worst case is that I'm traveling around US and I'll be here for anothers 12 days and I really need my cellphone back.
kursku said:
Hi Guys!
I was just regular using my phone for the last few months and then suddenly yesterday it decided to get crazy. First the green light was blinking and I couldn't acess my cellphone, so I rebooted and then it all started.
It stops at the Motorola logo.
I can acess the fastboo flash mode, tried to factory reset or either recovery, but once again stops at the same motorola screen
If I turn if off, I can see the charging status of the phone.
I know nothing about flashing, I've looked around and my XT890 it's a retail version, but I don't know what to download and such. And the worst case is that I'm traveling around US and I'll be here for anothers 12 days and I really need my cellphone back.
Click to expand...
Click to collapse
You can restore it easily with RSD Lite.
Just download it here: http://www.4shared.com/rar/vYYHCwBj/RSDLite57.html
And then download a factory image from here: http://forum.xda-developers.com/showthread.php?t=2239706
(Select the one you find appropiate)
Make sure you have the Moto drivers installed, your bootloader is unlocked and then install RSD Lite and extract the image somewhere.
Connect your phone in fastboot, open RSD Lite, and in filename browse to the folder whre you extracted the image and select the .xml file in it.
Then press start and wait.
tatazeuz said:
You can restore it easily with RSD Lite.
Just download it here: http://www.4shared.com/rar/vYYHCwBj/RSDLite57.html
And then download a factory image from here: http://forum.xda-developers.com/showthread.php?t=2239706
(Select the one you find appropiate)
Make sure you have the Moto drivers installed, your bootloader is unlocked and then install RSD Lite and extract the image somewhere.
Connect your phone in fastboot, open RSD Lite, and in filename browse to the folder whre you extracted the image and select the .xml file in it.
Then press start and wait.
Click to expand...
Click to collapse
And it's the fastest and best way for doing it, and void the warranty, right?
Still I can't connect withing the RSD. My cellphone is connected, I can see it in the fastload screen
"USB connected", but can't get it to be shown in the "Show device" in RSD. What can I do now?
kursku said:
Still I can't connect withing the RSD. My cellphone is connected, I can see it in the fastload screen
"USB connected", but can't get it to be shown in the "Show device" in RSD. What can I do now?
Click to expand...
Click to collapse
Make sure you have this installed
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
tatazeuz said:
Make sure you have this installed
Click to expand...
Click to collapse
I intalled and uninstalled to see if changed anything. It seems that it doesn't work.
I'm using a Windows 8 64x version, does it has anything to do with it?
kursku said:
I intalled and uninstalled to see if changed anything. It seems that it doesn't work.
I'm using a Windows 8 64x version, does it has anything to do with it?
Click to expand...
Click to collapse
I don't think so. My Windows 8.1 x64 works fine.
Have you tried different usb ports? That made a difference for me once.
tatazeuz said:
I don't think so. My Windows 8.1 x64 works fine.
Have you tried different usb ports? That made a difference for me once.
Click to expand...
Click to collapse
Yes I did, when It's charging and not in Fastboot, it shows up in the computer connected to de USB. When I change to the fastboot it doesn't show as connected. Even though I can use the cmd to work things out, but can't use it to flash it.
So, it works in a weird way all of them.
Those are the pictures of the connected cellphone, when it's in fastboot it shows as fastboot. When it's charging shows as XT890.
kursku said:
So, it works in a weird way all of them.
Those are the pictures of the connected cellphone, when it's in fastboot it shows as fastboot. When it's charging shows as XT890.
Click to expand...
Click to collapse
Start the phone i nfastboot then try the command "fastboot devices"
Send me a screen. Your PC doesnt seem to recognize the device very well.
I'll try to get a different computer tro try it, but so far no success
Try to put your ADB and Ri files to C:\"your foldername". It could be that there are problems when the files are in your user-accounts folders.
Did you already tried to connect with USB on the backside of your PC? Frontside are mostly hubs which could cause trouble.
via Razr I & Tapatalk 4
ICuaI said:
Try to put your ADB and Ri files to C:\"your foldername". It could be that there are problems when the files are in your user-accounts folders.
Did you already tried to connect with USB on the backside of your PC? Frontside are mostly hubs which could cause trouble.
via Razr I & Tapatalk 4
Click to expand...
Click to collapse
Can I do it with the CMD without the RSI?
What does RSI mean?
via Xoom 2 & Tapatalk 4