I can't get into clockworkmod anymore, the custom recovery is back. And on top of that I can't get any computer or cord to access my phone.
I had BO 2.0.1 for a while and at some point during this it stopped being able to connect USB to a computer. I tried uninstalling drivers, reinstalling, different cords, different computers, etc. Phone never recognized computer. This didnt matter much as my phone sucks and 4G works so I can get files and back up files that way. I flashed back to stock using my original recovery and made a few tweaks. This worked for a while but phone OTA updated (forgot to freeze that part). Now clockworkmod seems to be gone and I have problems, want to fix crap because OTA mostly failed but messed some stuff up and I cant get into clockworkmod or try to use AIO to reinstall it because USB charges but doesn't sync with a computer. I still have root access though.
Any suggestions? ... (cursing revo, can't wait till upgrade, have regretted this phone since day 2).
betatest3 said:
You can just put the SD card in a computer and download a ROM and flash it in stock recovery.
EDIT: how do you know you still have root access if you cant access your phone via USB or CWM
If you cant use stock recovery then your just screwed.
Click to expand...
Click to collapse
Not sure I understand. I have plenty of ROM's on my SD card. Either I don't know what I'm doing (which I don't) or the stock recovery for LG Revo does not allow flashing anything to my knowledge. It only wipes and factory restores.
betatest3 said:
Ok so if you cant get new ROM via stock recovery and cant get it recognised via USB then you should get a new device.
Click to expand...
Click to collapse
Yeah, definitely the plan. Just trying to buy some time until then. So is there any way to install CWM to my phone without using a computer? Can I just replace the system recovery files with CWM files?
Try this
http://forum.xda-developers.com/showpost.php?p=29636513&postcount=332
You can manually install clockwork this way.
I.M.famous XMAN said:
Try this
http://forum.xda-developers.com/showpost.php?p=29636513&postcount=332
You can manually install clockwork this way.
Click to expand...
Click to collapse
I can't find a link for the file, just AIO when I search. Do you have a file link for CWM?
***Edit: wait, I found the original post finally. I just needed to hang in a bit longer. http://forum.xda-developers.com/showthread.php?t=1121952
hopefully this works, thx famous
If you download Rom manager from the play store you can install cwm with it. Should be the easiest way. Just make sure to select the revo. I wouldn't suggest cwm touch either.
Sent from my VS910 4G using xda app-developers app
and bricked! even better than before. Any suggestions?
When phone boots LG logo then it reads:
[407] Fsatboot mode started
[520] USB init ept @ 0x3e000
[620] smem_read_alloc_entry Type : 402
[670] smem_read_alloc_entry Size Read 1816
[720] smem_read_alloc_entry Size Passed 1816
[780] smem ram ptable found: ver: 0 lens: 6
[830] fastboot_init()
[890] Fastboot maximum download size : 450 MBytes
[960] udc_start()
I have tried holding power and down volume, selecting wipe data, returns to text seen above.
**** Edit: found solution to fastboot IF my phone could recognize PC.
http://forum.xda-developers.com/showthread.php?t=1088046
Had the same problem
So I had the same problem, I may be a little late but I found a way to fix it
I had the same problem when the OTA came out, I was rooted with CWM but when the OTA tried to update I lost CWM but remained rooted and for the better part of a month could not get my computer to do anything but charge the phone when plugged in via USB. heres what I did and it worked for me
1. removed battery and sd card overnight (I think the device had to be void of any electricity to fully clear the ram)
2. plugged the phone in and rebooted (computer recognized it)
3. used LGNPST to install ZV9
4. it still kept root (which I thought was weird)
5. did a factory reset
6. lost root and went to stock zv9
7. did the OTA update to zv10
8. used the AIO to reroot and reinstall cwm
9. reinstalled BO
10. watched magic happen
hope it helps, I am by no means an expert just thought i'd share
my revo says:
fastboot mode started
udc.start()
-- suspend --
-- reset --
-- portchange --
-- reset --
-- portchange --
but when i try to follow instructions from http://forum.xda-developers.com/showthread.php?t=1088046
i ran fastboot erase recovery and cmd just says "waiting on device"
i think i need the fastboot drivers but I cannot find them anywhere. any help??
Related
Here is the exact details on what happened in the order I remember them
1. Was using the latest Cognition Rom and decided to try something different
2. Used Odin to flash back to stock
3. Flash Axura CE Version 4
4. Decided I liked Cognition better (Not bashing Axura, great Rom but not for me)
5. Went to try Odin and USB connection was not recognized
6. Knew USB connection worked under Cognition so tried to use Clockwork to restore to it.
7. After restore I got numerous FC and shut down.
8. After shut down phone would not boot but stuck on the i9000 Axura loading screen.
9. Now the problem I have is that I can get to recovery mode with no problem but USB is not recognizing connection, tried to get CW to mount USB so I could put the zip version of stock ROM on it but it will not mount. Also tried uninstalling samsung drivers and reinstalling with no luck
OUT OF OPTIONS
Any Help greatly appreciated
vstarrydr05 said:
Here is the exact details on what happened in the order I remember them
1. Was using the latest Cognition Rom and decided to try something different
2. Used Odin to flash back to stock
3. Flash Axura CE Version 4
4. Decided I liked Cognition better (Not bashing Axura, great Rom but not for me)
5. Went to try Odin and USB connection was not recognized
6. Knew USB connection worked under Cognition so tried to use Clockwork to restore to it.
7. After restore I got numerous FC and shut down.
8. After shut down phone would not boot but stuck on the i9000 Axura loading screen.
9. Now the problem I have is that I can get to recovery mode with no problem but USB is not recognizing connection, tried to get CW to mount USB so I could put the zip version of stock ROM on it but it will not mount. Also tried uninstalling samsung drivers and reinstalling with no luck
OUT OF OPTIONS
Any Help greatly appreciated
Click to expand...
Click to collapse
Is download mode still available? If yes your not screwed but your drivers might be.
What steps do you use to get into download mode.... 3 buttons or usb/vol+- combo ?
Yes download mode is available. I used the holding the volume up and down and plugging in USB. It goes to download mode with no issues whatsoever.
Well then this is a non-issue issue... Possibly a bad flash... Go in download mode again and reflash.
Your a bit crying wolf with no reason here. As long as download mode works and Odin detects the phone you have no issue
Use the Odin-one click if you have to ...but really calling it a brick when you have download mode gee-wiz.
Thats the issue. It is not detecting in ODIN. If it was detected I would have reflashed with no problem. I get the message that the USB device has malfunctioned and is not recognized
Try re-downloading the USB drivers - use the ones found in my signature.
If you can get into recovery - you can then get back into CWM and attempt to re-flash again - but you'd still need to 1-click back to stock using ODIN.
Have you tried to plug the usb cable in the Mb directly or changing its port ?
I actually downloaded your drivers last night and installed them. Still not recognized. I can get to CWR and have the zip files for AXURA and Cognition on the SD card. Get errors on various lines when trying to install either. I have tried 3 different cables and 4 different computers with no luck on recognition
Well crap... I did have the USB issue on my work's XP Machine - but when I went home to my Windows 7 box - it ended up finding the phone fine and I was able to flash back to stock.
Any chance you can find a Windows 7 box?
Dont know anyone with one unfortunately. I need to install Win 7 through bootcamp on my mac. I tried to even get it to mount as storage through CWR on it with no success
Well.. I can say with 99% certainty you should be able to restore the phone.. also if you look at my sig - I just added a link to the OTA_JH7.zip that is CWM flashable if you could somehow get the zip onto your phone that is lol.
Hm.. and I dunno how the virtual box of Win7 will run - but it's worth a shot. Windows 7 seems to be superior when it comes to figuring out devices vs. XP. I was shocked when it found my then toasted phone (similar issue your currently experiencing).
Haha, I have your zip to as a matter of fact. I picked it up but I dont know how to get it put on the phone if it wont recognize usb. If CW usb mounting would have working I was gonna put it on the internal sd and let it flash it
and actually bootcamp isnt a virtual box. its a partition on your hd where you can install windows on a mac computer
vstarrydr05 said:
and actually bootcamp isnt a virtual box. its a partition on your hd where you can install windows on a mac computer
Click to expand...
Click to collapse
Duh.. been awhile since I've used MAC - you are quite correct
ok, on the flashing back either rom I get a error on line 10 trying to reflash AXURA and a error on line 12 with Cognition
Hmm. have you tried to do the factory reset from within CWM? I mean at this point.. can't lose anything by trying it.
Yeah, just did the wipe/factory reset through CWR. Still sticking on the same screen
Try this.
-Unplug the phone
-Uninstall all the current Samsung drivers you have, reboot
-Install this one, reboot
-Put the phone in download mode
-Plug the phone
Does windows install the drivers? If not continu
-Open Windows Device Manager and do a plug&play search
-If you have a ? device select it
-Right click/Update Drivers
-Select automatic...... if windows finds nothing return and select Manual.
-Choose the "Samsung ADB composite device" driver and install
Is the install successful ?
-Now unplug the usb cable
-Open Odin
-Plug the usb cable
Does Odin now see the phone ?
I bricked my phone twice. Att support center gave me a replacement each time. Just make sure you cant get to the vol up/down power screen completely screw it up
Sent from my SAMSUNG-SGH-I897 using XDA App
ronf1011 said:
I bricked my phone twice. Att support center gave me a replacement each time. Just make sure you cant get to the vol up/down power screen completely screw it up
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Why would you brick a working phone based on a driver issue ?!
That's like blowing your car engine cause you can't communicate with onboard electronics........ unreal
I had rooted my phone previously running 2.1 and yesterday decided to try cm7. (I've flashed many G1 roms but none for Captivate)
Sorry this is quite long but wanted to give as much detail as possible
I was reading and watching the guides. Installed rom manager and flashed ClockworkMod Recovery 2.5.1.0
Rebooted the phone and tried to see if I can get into download mode by holding vol up + down and plugging the USB cable.
Once it booted tried to copy some other roms (zips) to the phone but the USB wasn't working on windows for some reason so rebooted in Linux. Phone mounted at first (for about a minute) but something happen and I lost the mount. I unplugged/plugged the usb cable but wasn't able see the phone as a drive even with fdisk.
So I ftped to the phone:
3buttonFix.zip
captivate-efsbackup.zip
cm7-captivate-initial-20110304.zip
speedmod-kernel-i897-k13c-500hz-CWM.zip
Installed 3buttonFix.zip (should let me enter download mode) from recovery, rebooted but still couldn't get in download mode.
Installed speedmod-kernel-i897-k13c-500hz-CWM.zip from recovery. Not sure if I had to do anything special like reformat the filesystem with the new kernel?
After reboot the phone gets stuck on Galaxy S sgh-i897 screen. Got back in recovery and installed captivate-efsbackup.zip and cm7-captivate-initial-20110304.zip
The cm7-captivate-initial-20110304.zip fails when trying to write the modem
'assert failed: write_raw_image("/tmp/modem.bin", "radio")'
I plugged the phone into another computer at that point and was able to get into "Download mode" for the first time. Odin didn't recognize the phone though. Download mode is very flaky. It starts sometimes, sometimes it doesn't (battery charger starts) even on the same port with the same cable. I have tried installing captivate drivers and/or kies on 7 different systems (5 laptops 2 desktops) but Odin never recognizes the phone and windows trows out a "USB Device Not Recognized" msg
I think my usb is not working properly but the guides how to recover assume working Download mode with Odin. Any suggestions on what to do for that? Or I guess I can download a different rom and/or kernel on my sdcard than mount the sdcard through recovery and install that way?
Any advise is appreciated as I'm not very familiar with the kernel and rom differences for captivate
Well you messed up on the instructions but that is a separate point.
I went through your post quickly so if I am saying something you grave tried I apologize
What drivers are you installing
Have you tried multiple ports
Are you using oem cord
Have you restarted your computer
Have you ever used odin before
CM7
I have used the following drivers:
SGH-i897_Captivate_USB_Drivers_5_02_0_2.zip
SAMSUNG_USB_Driver_for_Mobile_Phones_x86.exe (just the usb modem driver)
2 different versions of samsung kies which include usb drivers (don't have the software versions handy but I can get them if that will help)
Ports:
Multiple computer and multiple ports. Will try few more options
Cables:
Used 3 different usb cables. 1 of them is from a BB phone. 1 of the other 2 is the one which came with the captivate (not 100% sure though)
Reboots:
4 of the 7 computers I tried on were rebooted. One version of kies requires this anyhow.
Odin:
Haven't used Odin at all. I think when the phone gets connected and odin recognizes it one of the top left blocks changes color right ? I tried to flash even when it didn't (just to make sure I wasn't missing something) and saw 0 successful / 0 failed
Do you have android sdk installed on any of the computers?
CM7
So many red flags that something wasn't right with your phone and you still tried to flash it? I just don't get it.
@Miami_Son: Yeah but i'm too thick headed - living dangerously but yeah you're right.
@mcord11758: I have android sdk installed on my linux build at home. I'll put it on a windows system at work and see if it can see the phone. Anything in particular I should do / look out for ?
At least you've got a good attitude.
I think if you have kies installed it conflicts with the samsung drivers odin uses. Try uninstalling them and flash odin.
Sent from my i897
Edit damn swype
1tontomato said:
I think if you have kies installed it conflicts with the samsung drivers odin uses. Try uninstalling them and flash odin.
Sent from my i897
Edit damn swype
Click to expand...
Click to collapse
Try this first
Sdk to install updated drivers if this fails
CM7
I've done almost the exact same thing...having the same issues. Phone would not connect to computer. Other captivates connect fine. The phone is now stuck on a boot screen and I can put it into download mode but Odin or the computer will not detect it at all. I don't think I can get into recovery mode, nor can I get into a rom...pretty much just download mode or a boot screen.
@1tontomato: Tried uninstall kies, reboot, install samsung usb drivers, reboot still don't see the phone connected in odin
@mcord11758 The sdk is trying to download the repository directly and I'm behidn a proxy server at work. I'll update tonight, it will be most likely very late by the time I get home.
@kwhee07 Yeah sux to see a download mode but not being able to download. I can get at least into recovery so I guess I can at least flash something that way. The ports really make difference, I've seen many would just charge the phone and some will get your phone into download mode at least. Try a different pc and cable if you can.
I have the sdk...I've tried about everything else I can find. Is there a possible method of fixing this via the SDK? I feel like if I could make the computer force [odins] data out the usb port, it would work, the phone would be in download mode awaiting data....but I cant get odin to see it
There is a package you can install in sdk for usb drivers. Dl it
Open odin
Get into dl mode
Unknown device pops up
Click on it
choose custom drivers
Navigate to c drive/program files/android/extras/google add ons/usb click ok (the path may be slightly different) the computer should try to install the correct drivers
If it works odin should now recognize your device. If not I got nothing
CM7
Got the USB drivers from the SDK and tried to force them when it sees an unknown device, but I get "The specified location does not contain information about your hardware"
I tried to force it to use the samsung drivers also but without success.
Is it possible to just download a rom or kernel and update my current state? So that the phone at least boots. I can install stuff through recovery. Download mode is nice and everything but I'm giving up on it, don't have any more ideas to try
I have been trying to see data on my sdcard from ClockworkMod Recovery 2.5.1.0 I go to
Mounts and Storage -> mount /mnt/sdcard
Install *.zip from sdcard -> choose zip from sdcard
I don't see /mnt at all I try and go under sd/ but it says No files found.
bestivo said:
I have been trying to see data on my sdcard from ClockworkMod Recovery 2.5.1.0 I go to
Mounts and Storage -> mount /mnt/sdcard
Install *.zip from sdcard -> choose zip from sdcard
I don't see /mnt at all I try and go under sd/ but it says No files found.
Click to expand...
Click to collapse
Under mounts and storage do you see the option for mount usb this might be able to force your computer to see it as a removable drive. If out does you should be able to copy another rom to the sd and flash. This may or may not work for you because you might still need to repartition which you only do with odin. Take this advise with extreme caution I really think you need odin If you do decide to flash another rom, use cognition because Dg's includes the fixed boot.bin. Probably because so many people use the one click and kill their button combos and don't know it. Other devs don't include it in their roms, because it's dangerous to over write something that doesn't need to be overwritten. Good luck
Sent from my Fusion 1.8 SAMSUNG-SGH-I897
I tried already the usb mount option from recovery at home and now at work also on few different systems/ports including a linux machine. I don't see the drive connected.
My only option left is to get somehow the sdcard mounted and install a rom from there. Or maybe just repartitioning/changing the filesystem might fix the getting stuck problem.
I ended up bringing my phone back to att, and they said that the 1010 batch was under product advisory..they exchanged my phone with almost no questions asked.
Now i have a 1008 and am running CM7
Finishing up the story in case it might help somebody in the feature.
I called AT&T to get my phone replaced and it turns out it has liquid dmg. There's a little white sticky that turns red when there's liquid dmg. Mine was pink but wasn't wait so no warranty for me. Turns out most of the time people get liquid dmg is if they leave the phone in the bathroom or close to the kitchen's sink, which is kinda bs but whatever.
I've tried few more times. Tried even on a Mac and on a Linux system (using http://forum.xda-developers.com/showthread.php?t=755265 )
I was about to give up and go seek one of the 'professional rooters' but last thing I tried was to use an 'air duster' and clean the usb port on my phone. After that Odin was able to see my phone. The connection was dropping on/off but it successfully finished a flash.
Not sure if I should even try to put another rom or the official froyo update but at least for now I'm up and running
Thanks all
Hi all, I have scoured the web for similar issues and can't find any answers
-Captivate I897 running 2.1 formerly mounted to my MAC just fine, rooted using Galaxy-S one click root. Root was successful, mostly just removed bloatware, etc.. but alas my phone is no longer recognized by the computer, although the phone recognizes that it is connected, when I click "mount" nothing happens on the computer's end.
-Appears to be a problem with the phone, I have tried Win7 w/ Kies mini and installed/reinstalled drivers, dev mode, etc...nada. And here's the kicker - these machines will recognize and mount my GF's unrooted Vibrant just fine.
-I have a separate micro SD card reader that can read the SD card out of the phone that way.
-So, I am hoping for some help to either
1 - fix the computer recognition issue, or
2- find steps to manually update to 2.2 or unroot, etc, any ideas that will get me running 2.2 and hopefully mount to Mac or PC, using files manually loaded to the SD and installed during recovery mode, this looks like flashing, would Andromeda or Cognition fix the connectivity issue?
Thanks in advance!!
If you're rooted and can get into download mode (power off+2 volume buttons+plug usb in) then you can use this link ----> http://www.megaupload.com/?d=QL6NX702 to flash stock 2.2 firmware. Note: This WILL break your root. Here's the thread on Odin One Click as well---->http://forum.xda-developers.com/showthread.php?t=731989. You probably want to read the information there before flashing to 2.2.
Good Luck!
Thanks for the suggestion, I've tried multiple drivers, but since my PC doesnt recognize my phone, both Odin or Superoneclick dont recognize my phone also.
I was able to manually unroot by copying the One Click Root Update.zip to my phone via Wifi File-sharing app. Unroot was successful, but still no connection to PC or Mac.
I'm stuck for now, It appears that any type of flashing requires a PC connection, unless there is some way to flash completely with Wifi-copied files and using the 'reinstall packages' option?
Well, if you have a dropbox, you could drag and drop a rom (say cognition) onto your phone's dropbox. Then you'd need to find a CWM recovery (make sure it's not 3.0) update.zip and reinstall packages. This will give you CWM recovery, from which you could install Cognition from your dropbox. No guarantees it will work, but it's worth a shot.
Can't help on the Mac and I only have a dim memory of 2.1, but what are your setting under Settings/Applications for USB settings and Development? Do you have USB debugging checked (on)? Do you have the Development settings set to something weird like Kies update?
My recommendation is to put USB debugging on (checked). In that case I think the USB settings choice is disabled and therefore ignored. Then when you connect to the computer you will get a message in the notification bar on your phone saying something like "select to copy files to/from the computer". Click that, then click the mount button. You should then be able to see the extra drives on your computer by looking under My Computer or whatever (on a PC). On mine they are F and G, no special indications that they are drives on an attached phone. I also do get an automatic pop-up for the new drives, like when you insert a USB stick, but I imagine that setting could be disabled so look for the drives manually.
If you can get a com port try to do a master clear with the phone plugged in and on the entire time, then do various methods of getting into download mode if you got a com port when the phone booted up, future references I would use Odin to flash speedmod kernel to get cwm and then flash a rom or leave it as is, when I first started rooting I used the same software and got the same problem
Try installing all the drivers beforehand just to make sure
Sent from my I897 using XDA App
do u have the drivers installed?
Mr.AdAbsurdum said:
If you can get a com port try to do a master clear with the phone plugged in and on the entire time, then do various methods of getting into download mode if you got a com port when the phone booted up, future references I would use Odin to flash speedmod kernel to get cwm and then flash a rom or leave it as is, when I first started rooting I used the same software and got the same problem
Try installing all the drivers beforehand just to make sure
Click to expand...
Click to collapse
+1
My wife's phone has the exact same issue as OP. Suggestions like above are useless unfortunately as the phone does not recognize that it is connected to a computer. Instead it acts as though it is connected to a charger. The oddest thing is that if I plug it in to a computer while the phone is turned off, the phone will turn on! However, still no recognition that it is connected to a PC.
Initially when I connected the phone the first time, Win7 said driver failed to install. Then my working cappy would not connect to Win7. I had to uninstall and reinstall the drivers and restart. My working cappy connected as it should, but my wife's phone from that point refused to recognize anything but charging.
Attempts to fix Via external SD: (1) I transferred Continuum 4.1 and reinstalled. Still not recognized. (2) Transferred my recovery images from January for stock, but just became stuck on boot screen for Continuum. I am uneasy about transferring the update-recovery.zip and download folder from original backup as I do not know whether it will screw up attempts to re-enter recovery if it does not work. (3) Attempted download mode, but only works via CWM 2 (not extended menu or three button or by inserting battery with odin up trick). Even when in DL mode odin does not recognize the COM port. (4) Attempted different orders for connecting to Odin in DL mode. By orders I mean rearranging the order I connect (i.e. open odin then connect cable then go to DL). (5) transferred andromeda3 and reinstalled, still same issue.
So, I am left thinking a hardware failure occurred at some point, so I will need to open it up and check connectors to solder it possibly.
Possible non-hardware solution is to restore to stock somehow WITHOUT Odin via CWM. Anyone know if this is possible or have a link to a flashable zip?
Thanks!
edit: I am on Win7 and always made sure USB debugging was checked. Also I tried to connect via One-Click Root for the heck of it and kies mini. No luck.
flashed without a cable
Thanks for the tip jomeister 15, I was able to flash new roms dropped over wifi with CWM recovery. This got me onto 2.2 which was the main purpose of this whole adventure. I just loaded Andromeda3 and it's pretty darn impressive.
My PC and Mac still do not recognise my phone, I troubleshot extensively like Snowake and nothing is recognized. I'm convinced its a hardware issue but who cares with wireless flashing and file transfer.
snowake said:
+1
My wife's phone has the exact same issue as OP. Suggestions like above are useless unfortunately as the phone does not recognize that it is connected to a computer. Instead it acts as though it is connected to a charger. The oddest thing is that if I plug it in to a computer while the phone is turned off, the phone will turn on! However, still no recognition that it is connected to a PC.
Initially when I connected the phone the first time, Win7 said driver failed to install. Then my working cappy would not connect to Win7. I had to uninstall and reinstall the drivers and restart. My working cappy connected as it should, but my wife's phone from that point refused to recognize anything but charging.
Attempts to fix Via external SD: (1) I transferred Continuum 4.1 and reinstalled. Still not recognized. (2) Transferred my recovery images from January for stock, but just became stuck on boot screen for Continuum. I am uneasy about transferring the update-recovery.zip and download folder from original backup as I do not know whether it will screw up attempts to re-enter recovery if it does not work. (3) Attempted download mode, but only works via CWM 2 (not extended menu or three button or by inserting battery with odin up trick). Even when in DL mode odin does not recognize the COM port. (4) Attempted different orders for connecting to Odin in DL mode. By orders I mean rearranging the order I connect (i.e. open odin then connect cable then go to DL). (5) transferred andromeda3 and reinstalled, still same issue.
So, I am left thinking a hardware failure occurred at some point, so I will need to open it up and check connectors to solder it possibly.
Possible non-hardware solution is to restore to stock somehow WITHOUT Odin via CWM. Anyone know if this is possible or have a link to a flashable zip?
Thanks!
edit: I am on Win7 and always made sure USB debugging was checked. Also I tried to connect via One-Click Root for the heck of it and kies mini. No luck.
Click to expand...
Click to collapse
You could try to send a ROM, kernel, and update.zip(CWM flash) and attempt to get another ROM over it. Format the system, wipe dalvik, I don't think its a hardware issue, I had the same problem first time I tried using 1 click rooting, I just waited patiently and got a com port after about two days, so that just leads me to believe some configuration file was corrupted during flash to stock, possibly flashing a ROM or reflashing the ROM you're on with a complete wipe of the system and user data and whatnot, or possibly just doing a backup up from cwm and immediately restore it, if its charging I highly doubt its hardware
Sent from my I897 using XDA App
So I got carried away with trying to get rid of that three dot menu button at the bottom of the screen and I've slowly managed to work myself into a really bad problem. I'm not necessarily new to this, I've rooted my Droid 2, Droid 3, and GS3, but this has been more complicated for me.
Anyways, my problem is, I was trying to wipe my phone so that I could flash a ROM. This is because I couldn't access my settings (I overwrote the original in an attempt to get rid of the multitask button). But while I was in CWM I factory reset it but I also accidentally deleted the system. My bootloader is unlocked, but now my phone is on and I can't get into recovery, and I'm assuming it's because the whole system is gone so there's nothing to boot.
Another problem I had (while my phone was able to boot up completely), Android File Transfer wouldn't work, I downloaded a rom for the settings.apk but it wouldn't let me transfer files between my computer and phone. I emailed the .apk to myself but since I couldn't access settings I wasn't able to pick my usual email (although now I'm thinking I should have just used the email I first signed in with). Not as much of a concern but input is still welcome.
I've looked up RUU but it looks like it's not available yet for Verizon. Any possible solutions would be MUCH appreciated.
Don't worry, your device is not bricked.
If your bootloader works well, you must select fastboot and flash the recovery via fastboot.exe in the command line. Now you should be able to get into recovery.
If you wiped your partitions, you can have a trouble with mounting /sdcard. Then you should get an OTG Micro USB cable and put ROM on your USB stick, but I'm not sure if TWRP recovery for HTC One supports mounting flash memory from USB host.
Gudio142 said:
Don't worry, your device is not bricked.
If your bootloader works well, you must select fastboot and flash the recovery via fastboot.exe in the command line. Now you should be able to get into recovery.
If you wiped your partitions, you can have a trouble with mounting /sdcard. Then you should get an OTG Micro USB cable and put ROM on your USB stick, but I'm not sure if TWRP recovery for HTC One supports mounting flash memory from USB host.
Click to expand...
Click to collapse
I'm stuck on the green HTC logo screen and the red warning about the bootloader. I can't boot into recovery anymore. By the way I'm using a Mac but I do have a PC running Windows 8 if there's solutions I could try
Gudio142 said:
Don't worry, your device is not bricked.
If your bootloader works well, you must select fastboot and flash the recovery via fastboot.exe in the command line. Now you should be able to get into recovery.
If you wiped your partitions, you can have a trouble with mounting /sdcard. Then you should get an OTG Micro USB cable and put ROM on your USB stick, but I'm not sure if TWRP recovery for HTC One supports mounting flash memory from USB host.
Click to expand...
Click to collapse
I tried flashing into recovery via fastboot but my computer doesn't recognize my device. And I'm pretty sure I had drivers installed since that's how I unlocked the bootloader in the first place..
xerhoffx said:
I tried flashing into recovery via fastboot but my computer doesn't recognize my device. And I'm pretty sure I had drivers installed since that's how I unlocked the bootloader in the first place..
Click to expand...
Click to collapse
Install the latest drivers and try from a windows 7 pc (or windows 8, win 8.1 doesn't work well)
Reinstall drivers if you haven't already and try the correct file for your 'Modelid' here. It's the only way I got mine to work again after i did the same thing.
Note: The file i used had a different software version but it still flashed ok.
After that, if you can find the right Nandroid you now have the ability to flash that
n1234d said:
Install the latest drivers and try from a windows 7 pc (or windows 8, win 8.1 doesn't work well)
Click to expand...
Click to collapse
I only have Windows 8 I believe...
xerhoffx said:
I only have Windows 8 I believe...
Click to expand...
Click to collapse
Try a different PC, worked for another guy whose pc wouldn't detect his phone. See if a pc with XP works..
ndulian increase
jingles98 said:
Reinstall drivers if you haven't already and try the correct file for your 'Modelid' here. It's the only way I got mine to work again after i did the same thing.
Note: The file i used had a different software version but it still flashed ok.
After that, if you can find the right Nandroid you now have the ability to flash that
Click to expand...
Click to collapse
Where could I find a nandroid for Verizon? I feel like Verizon is the most difficult to find.
FIXED
I was finally able to boot into recovery and thank goodness had a CWM backup. Thanks for your input guys.
Hi there.
I recently flashed the OmniROM to my i8190, but since it got several issues, after two weeks i decided to flash stock ROM.
So i enter TWRP recovery and wipe all data on the smartphone, but then my computer crashed and lost the VM that got Odin and drivers etc. so in a new VM i decided to try to flash, but now i can't.
Odin doesn't recognize my i8190, i thought ADB sideload could do the trick following this guide http://forum.xda-developers.com/showthread.php?t=2559200but all i got was:
error: device not found
Now i ended up with a pretty brick hahaha.
How can i flash a ROM ..ANY to my phone.
I got another i8190 so i installed the drivers from it to the VM, all except the MTP device, that got error.
I also installed SAMSUNG drivers, but nothing, ... i'm kind of losing it now hahaha.
Can someone helpe me flash this thing?
a) I CAN enter TWRP Recovery
b) I CAN enter Download Mode
c) Don't know if Odin doesn't pick it up since USB Debug i presume it's not on, but then again, since no OS is installed, i don't know how to turn it on from recovery or something like it.
zenneka said:
Hi there.
I recently flashed the OmniROM to my i8190, but since it got several issues, after two weeks i decided to flash stock ROM.
So i enter TWRP recovery and wipe all data on the smartphone, but then my computer crashed and lost the VM that got Odin and drivers etc. so in a new VM i decided to try to flash, but now i can't.
Odin doesn't recognize my i8190, i thought ADB sideload could do the trick following this guide http://forum.xda-developers.com/showthread.php?t=2559200but all i got was:
error: device not found
Now i ended up with a pretty brick hahaha.
How can i flash a ROM ..ANY to my phone.
I got another i8190 so i installed the drivers from it to the VM, all except the MTP device, that got error.
I also installed SAMSUNG drivers, but nothing, ... i'm kind of losing it now hahaha.
Can someone helpe me flash this thing?
a) I CAN enter TWRP Recovery
b) I CAN enter Download Mode
c) Don't know if Odin doesn't pick it up since USB Debug i presume it's not on, but then again, since no OS is installed, i don't know how to turn it on from recovery or something like it.
Click to expand...
Click to collapse
Try another usb port and/or another usb cable. Also make sure that nothing with kies is runnung in background if you happens to have that installed.
When you connect with adb, also take a look on your phone screen if it asks for authorization to connect.
You got both download and recovery so problem is with connection/drivers.
zenneka said:
Hi there.
I recently flashed the OmniROM to my i8190, but since it got several issues, after two weeks i decided to flash stock ROM.
So i enter TWRP recovery and wipe all data on the smartphone, but then my computer crashed and lost the VM that got Odin and drivers etc. so in a new VM i decided to try to flash, but now i can't.
Odin doesn't recognize my i8190, i thought ADB sideload could do the trick following this guide http://forum.xda-developers.com/showthread.php?t=2559200but all i got was:
error: device not found
Now i ended up with a pretty brick hahaha.
How can i flash a ROM ..ANY to my phone.
I got another i8190 so i installed the drivers from it to the VM, all except the MTP device, that got error.
I also installed SAMSUNG drivers, but nothing, ... i'm kind of losing it now hahaha.
Can someone helpe me flash this thing?
a) I CAN enter TWRP Recovery
b) I CAN enter Download Mode
c) Don't know if Odin doesn't pick it up since USB Debug i presume it's not on, but then again, since no OS is installed, i don't know how to turn it on from recovery or something like it.
Click to expand...
Click to collapse
Try this :
If you have an external sdcard in your s3 mini then :
1. remove it and put it into a other phone
2. download a ROM and move the ROM what you downloaded to your external sdcard
3. Put the external sdcard back to your s3 mini
4. Go to recovery and choose "install from external sdcard"
5. And intstall the ROM
6. Done! You have a OS again.
It's very easy and if you don't have a external sdcard then you have a big problem bro
shelves mmerese
xXPR0T0TYPEXx said:
1. remove it and put it into a other phone
Click to expand...
Click to collapse
If you have an adapter (micro SD to SD) then you should be able to insert the card into a card reader. This will probably be easier than trying to find another phone.
MarisPiper said:
If you have an adapter (micro SD to SD) then you should be able to insert the card into a card reader. This will probably be easier than trying to find another phone.
Click to expand...
Click to collapse
Yeah i did this, but no luck at all.
Finally i change the usb driver, installed Kies again and voilá! Odin picked up the phone and flash were on .
Thanks to all.
Glad you've got it sorted.
I've noticed my PC wants to install drivers for the phone almost constantly. Every small change seems to result in a change of driver. It can be frustrating.
MarisPiper said:
Glad you've got it sorted.
I've noticed my PC wants to install drivers for the phone almost constantly. Every small change seems to result in a change of driver. It can be frustrating.
Click to expand...
Click to collapse
due to windows updates this should be expected that certain third party software like the drivers would need updates
so that leaves two choices
either keep your stuff up to date
or
get left behind and drowned in problems