Related
I tried to flash stock 2.3.6 xwjvz and odin hanged at setup connection and everything i try it just hang's at setup connectio.. i cant flash anything... strange thing that the phone is soft bricked and shows that sign with phone and computer but it still wants to go into download mode normali???
II tried this thing so far... different odin, reinstall usb drivers and going to download mode via usb jig...
krimos said:
I tried to flash stock 2.3.6 xwjvz and odin hanged at setup connection and everything i try it just hang's at setup connectio.. i cant flash anything... strange thing that the phone is soft bricked and shows that sign with phone and computer but it still wants to go into download mode normali???
II tried this thing so far... different odin, reinstall usb drivers and going to download mode via usb jig...
Click to expand...
Click to collapse
Actually the same happened to my SGS & ended up at samsung service center, got it's Mobo replaced ..!
Still i Dunno what caused the issue..
Did you try a different USB port? Or Different USB cable? Also what version of ODIN are you running?
Hello there,
I am Belgian so i'm gonna try to do my best to find my english somewhere
I have a samsung galaxy s3 mini gt-i8190..
I have tried to flash with odin thru pda BUT it stopped with fail as result..
Then i have tried to put original firmware back the same way but fail again,
then tried again with same original firmware and succeeded..
Phone froze at samsung logo, tried again and now i got the message "firmware upgrade encountered an issue. please select recovery mode in Kies & try again."
Ok, so i plug the phone back in the usb cable: Device Not Recognized! (windows 7 ultimate laptop).
I can get in to download mode: still not recognized via usb.
recovery mode DOESN'T work at all (3 button combo) just the error message at the normal boot and the download mode.
So basically i can't flash cause i can't connect, reinstalled drivers, used another pc, same thing...
It doesn't even charge the phone..
Odin mode says:
Product name: GT-I8190
Custom Binary Download: YES (4 counts)
Current binary: Custom
System status: Official
So does there somehow any file exists to put on my sd card to access usb OR a file to go into recovery mode.
Any tip is welcome, will try them all..
Thanks by advance,
yoni089
Have you tried installing Samsung's USB Driver? I know installing kies comes with the USB drivers but just in case. You might want to check if it's properly installed in your computer. Try reseting your counter first with Triangle Away. Please tell me more of what you did.
Click on the thanks button if I helped!
Change usb port and make sure all processes with kies are killed in taskmanager.
Open Odin. Put the phone in download mode and connect usb.
Hello,
Thanks for the reply's
I did install Odin first, when i flashed my phone it failed..
So i decided to install kies to make sure i had the right drivers,
Uninstalled Kies without the drivers. The phone was still recognized back then!!
Flashed it again and again FAIL!
Since then NOTHING works with the usb connection, windows does not recognize my phone "unknown device".
So it doesnt even know what it is..
Uninstalled the drivers and reinstalled them, rebooted my laptop with battery out for a minute but nothing works..
Also i tried to connect to another pc but no luck..
So i guess the key on my phone for the driver to find is missing/deleted by flashing and failing..
That's why i asked if there is any file to putt on my sd card to be recognized by my computer.
I did tried many times using another usb port..
Also tried with and without sim card/ sd card.
(btw: does they have to be in there anyway?)
Thnx and grtz,
Yoni089
please post where odin fail?
samersh72 said:
please post where odin fail?
Click to expand...
Click to collapse
Sorry, can't say.
It was somewhere in the last 20% if i'm right, its been a week from now and did not take a log of it with reflashing in mind..
yoni089 said:
Sorry, can't say.
It was somewhere in the last 20% if i'm right, its been a week from now and did not take a log of it with reflashing in mind..
Click to expand...
Click to collapse
before flashing, make sure you can see a COM: something when you connect your device.
Sent from 12*.5x.**.58
SethCode'z said:
before flashing, make sure you can see a COM: something when you connect your device.
Sent from 12*.5x.**.58
Click to expand...
Click to collapse
I know that, my connection worked fine i did see the com: port in odin and it said "added!".
then i started flashing again and suddenly "fail", got the triangle, went back to download mode, tried to connect again and windows OR Odin didn't recognized my phone anymore, device not recognized and no "com:" in odin.
Tried different ports, battery out for a minute, no sim, no sd, reinstalled drivers, nothing works..
That's the point why i made this thread cause i see no solution in this anymore, if i have no usb connection i can't flash ( OR IS THERE A WAY???), if i can't flash i probably can't get usb connection..
thx for the effort
grtz,
Yoni089
yoni089 said:
I know that, my connection worked fine i did see the com: port in odin and it said "added!".
then i started flashing again and suddenly "fail", got the triangle, went back to download mode, tried to connect again and windows OR Odin didn't recognized my phone anymore, device not recognized and no "com:" in odin.
Tried different ports, battery out for a minute, no sim, no sd, reinstalled drivers, nothing works..
That's the point why i made this thread cause i see no solution in this anymore, if i have no usb connection i can't flash ( OR IS THERE A WAY???), if i can't flash i probably can't get usb connection..
thx for the effort
grtz,
Yoni089
Click to expand...
Click to collapse
With what you're saying, it seems something has gone corrupt. Maybe a binary or an image. Flashing a rom using your phone might fix this but it's not a 100% success. It might destroy your phone more or fix it. It's a 50/50... :fingers-crossed:
SethCode'z said:
With what you're saying, it seems something has gone corrupt. Maybe a binary or an image. Flashing a rom using your phone might fix this but it's not a 100% success. It might destroy your phone more or fix it. It's a 50/50... :fingers-crossed:
Click to expand...
Click to collapse
And how exactly does this work?
I guess with the sd card but i don't have recovery mode so..
yoni089 said:
And how exactly does this work?
I guess with the sd card but i don't have recovery mode so..
Click to expand...
Click to collapse
Did your three button combination work for recovery mode before this happened?
tys0n said:
Did your three button combination work for recovery mode before this happened?
Click to expand...
Click to collapse
I have no idea, i never needed it before..
yoni089 said:
I have no idea, i never needed it before..
Click to expand...
Click to collapse
Ok. Many i8190 was delivered without working combo so I thought I should ask.
What happens when you try to enter recovery? (vol+/home/power)
Nothing at all, completely dead?
tys0n said:
Ok. Many i8190 was delivered without working combo so I thought I should ask.
What happens when you try to enter recovery? (vol+/home/power)
Nothing at all, completely dead?
Click to expand...
Click to collapse
It just turns on to the triangle that says there is an issue with the firmware upgrade..
yoni089 said:
It just turns on to the triangle that says there is an issue with the firmware upgrade..
Click to expand...
Click to collapse
Do provide the odin log, probably corrupted PIT ?
yoni089 said:
It just turns on to the triangle that says there is an issue with the firmware upgrade..
Click to expand...
Click to collapse
aah ok, and Odin doesn't recognize it at all when you connect it in download mode?
linux is your answer it never fails
Sent from my Vodafone Smart II using xda premium
AssToast said:
Do provide the odin log, probably corrupted PIT ?
Click to expand...
Click to collapse
How do i get that log?
tys0n said:
aah ok, and Odin doesn't recognize it at all when you connect it in download mode?
Click to expand...
Click to collapse
no it doesn't, not even my laptop does..
yoni089 said:
How do i get that log?
no it doesn't, not even my laptop does..
Click to expand...
Click to collapse
No kies, correct drivers, tried different ports. Then I don't know. Are you using original USB cable?
I once got a bad flash like you did, but at least Odin detected it and I was able to flash this firmware with repartition, because official stock fw didn't work for me neither.
nuotal you
tys0n said:
No kies, correct drivers, tried different ports. Then I don't know. Are you using original USB cable?
I once got a bad flash like you did, but at least Odin detected it and I was able to flash this firmware with repartition, because official stock fw didn't work for me neither.
Click to expand...
Click to collapse
I did it all
Yes it was the original usb cable..
Ok So was running my custom rom and decided to return it to stock. PC odin keeps saying fail when I try to flash standard ICS Rom and then whenever I try to retry it my PC keeps saying USB Device is not recognized?? I uninstalled Samsung Kies and Samsung USB driver and reinstalled but still have the same problem?
My phone can get into download mode and also if I simply try to turn it on its says Firmware Upgrade encountered an issue, Please select recovery mode and try in Kies & try again.
The standard rom I am trying to flash is called: N7000XXLQ2_N7000XXLPT_N7000XEULP4_HOME.tar.md5
And the version of PC Odin is Odin3 v3.04
Can anyone help as I am stuk at work without a phone
Forgot to say when I put it in download mode and connect the usb cable I get a pop up on my pc saying USB Device is not recognized.
it is due to bad usb connection
1 change usb cable.. may b it getting shorting inside ,, on rx tx
2 change usb port. do not relay on front cabinate usb if you are not using laptop.. use on board usb
after this two things should change or your motherboard is not producing enough power for device
try on another pc.. ofcourse of frend..
regards
skhan
All sorted had to run the Samsung USB Drivers as an Administrator and it all worked fine Phew!
wow........ ...... .......
new thing heard from you....
good work in technical field.. im impressed .... go ahead
Hello!
I did a root with odin on my device many time ago, it was successfull. But after that, when I plug the USB in the computer, it only charges. It wasn't important for me, because my device was rooted.
But nowadays I tried to update to 4.4.2 from 4.1.2, so I thought that if I wipe cache and data the USB will work again... but no, so I thought: "maybe if I unroot...", and now I have a gt-i8190n without root and with an USB that only charges.
I tried to update from SD, but the result is: "signature verification failed".
I can get in download mode, but my computer doesn't recognize the device (tried in other computers, and with other cables).
So, here is my question: Will a JIG USB solve anything?
Thanks
saadiko said:
Hello!
I did a root with odin on my device many time ago, it was successfull. But after that, when I plug the USB in the computer, it only charges. It wasn't important for me, because my device was rooted.
But nowadays I tried to update to 4.4.2 from 4.1.2, so I thought that if I wipe cache and data the USB will work again... but no, so I thought: "maybe if I unroot...", and now I have a gt-i8190n without root and with an USB that only charges.
I tried to update from SD, but the result is: "signature verification failed".
I can get in download mode, but my computer doesn't recognize the device (tried in other computers, and with other cables).
So, here is my question: Will a JIG USB solve anything?
Thanks
Click to expand...
Click to collapse
tried another cable?
disable signature verification
efaustino84 said:
tried another cable?
disable signature verification
Click to expand...
Click to collapse
yes, i did it.
How can I disable signature verification? my recovery is a 3e WITHOUT modify. And remember, no root and no USB connection (nobody said was going to be easy).
PD: English isn’t my first language, so please excuse any mistakes, I'm spaniard.
saadiko said:
yes, i did it.
How can I disable signature verification? my recovery is a 3e WITHOUT modify. And remember, no root and no USB connection (nobody said was going to be easy).
PD: English isn’t my first language, so please excuse any mistakes, I'm spaniard.
Click to expand...
Click to collapse
i am sure there should be a twrp or cwm zip file that you can load via SD
world cup not looking good
efaustino84 said:
i am sure there should be a twrp or cwm zip file that you can load via SD
world cup not looking good
Click to expand...
Click to collapse
I've tried many files (I can take the microSD and load files in the computer). But when I start the recovery mode and select external storage, it seems to work, until it arrives to that signature message.
Yes, my i8190n is working as good as Spain in the world cup.
saadiko said:
Hello!
I did a root with odin on my device many time ago, it was successfull. But after that, when I plug the USB in the computer, it only charges. It wasn't important for me, because my device was rooted.
But nowadays I tried to update to 4.4.2 from 4.1.2, so I thought that if I wipe cache and data the USB will work again... but no, so I thought: "maybe if I unroot...", and now I have a gt-i8190n without root and with an USB that only charges.
I tried to update from SD, but the result is: "signature verification failed".
I can get in download mode, but my computer doesn't recognize the device (tried in other computers, and with other cables).
So, here is my question: Will a JIG USB solve anything?
Thanks
Click to expand...
Click to collapse
I think you need to install the USB drivers for your s3 mini.
If you use TWRP as recovery then boot to recovery > settings > uncheck "Zip signature verification" then you will not again get a failed message.
Do a nandroid backup before you start flashing
xXPR0T0TYPEXx said:
I think you need to install the USB drivers for your s3 mini.
If you use TWRP as recovery then boot to recovery > settings > uncheck "Zip signature verification" then you will not again get a failed message.
Do a nandroid backup before you start flashing
Click to expand...
Click to collapse
The drivers are correctly installed, because the first time I rooted I had no problem, and after it, I have plugged another device (an i8190n, too) and the computer recognizes it without any problem.
I have a 3e recovery, so I can't uncheck "Zip signature verification".
May I start to look for a jig USB?
saadiko said:
The drivers are correctly installed, because the first time I rooted I had no problem, and after it, I have plugged another device (an i8190n, too) and the computer recognizes it without any problem.
I have a 3e recovery, so I can't uncheck "Zip signature verification".
May I start to look for a jig USB?
Click to expand...
Click to collapse
No wonder why it fails 3e recovery is the stock recovery from s3 mini. You can only flash signed zip from Samsung. You need a custom recovery for flashing custom ROMs if you still have root access then download from play store "ROM Manager" and install CWM recovery or download "[ROOT] Rashr - Flash Tool" for flash CWM or TWRP recovery.
xXPR0T0TYPEXx said:
No wonder why it fails 3e recovery is the stock recovery from s3 mini. You can only flash signed zip from Samsung. You need a custom recovery for flashing custom ROMs if you still have root access then download from play store "ROM Manager" and install CWM recovery or download "[ROOT] Rashr - Flash Tool" for flash CWM or TWRP recovery.
Click to expand...
Click to collapse
I'm so clever that I unroot the device hoping the USB works :silly:
Can I flash a signed zip from Samsung from the SD and pray for the USB works normally again?
saadiko said:
I'm so clever that I unroot the device hoping the USB works :silly:
Can I flash a signed zip from Samsung from the SD and pray for the USB works normally again?
Click to expand...
Click to collapse
Put the phone in download mode and flash twrp in odin. It's the only way to put a new recovery there without root already.
Otherwise root it, and then flash recovery with rommanager or other similar app.
tys0n said:
Put the phone in download mode and flash twrp in odin. It's the only way to put a new recovery there without root already.
Otherwise root it, and then flash recovery with rommanager or other similar app.
Click to expand...
Click to collapse
As I have mentioned before, my device USB only charges, there isn't communication with computer. I know how odin works, but the problem is with the USB.
I'm asking if JIG USB is the only solution, and if it will work.
Thanks for all the answers, but as I had said before... USB only charges :crying:
saadiko said:
As I have mentioned before, my device USB only charges, there isn't communication with computer. I know how odin works, but the problem is with the USB.
I'm asking if JIG USB is the only solution, and if it will work.
Thanks for all the answers, but as I had said before... USB only charges :crying:
Click to expand...
Click to collapse
If there are no other way then try JIG USB if you think it will work
xXPR0T0TYPEXx said:
If there are no other way then try JIG USB if you think it will work
Click to expand...
Click to collapse
I'm not sure if it will work, but it's the last thing to try.
I have made an order of the jig USB, and it is supposed to arrive in 20 days (less than 2$ and free shipping). Until then, must wait... I'll will tell you if it works or not.
Thanks!
saadiko said:
As I have mentioned before, my device USB only charges, there isn't communication with computer. I know how odin works, but the problem is with the USB.
I'm asking if JIG USB is the only solution, and if it will work.
Thanks for all the answers, but as I had said before... USB only charges :crying:
Click to expand...
Click to collapse
Even when you put your phone in download mode and then connect the cable?
If so, same thing will probably happen with a USB jig. They are only to force the phone to DL mode. You still have to connect it after that..
How can you tell that it charges in download mode? There is no icons for that.
tys0n said:
Even when you put your phone in download mode and then connect the cable?
If so, same thing will probably happen with a USB jig. They are only to force the phone to DL mode. You still have to connect it after that..
How can you tell that it charges in download mode? There is no icons for that.
Click to expand...
Click to collapse
Yes, when I connect the cable Odin doesn't recognize it, so I supose that only charges (it's true, perhaps it doesn't do it, there isn't any icon). It's supposed when I conncet the phone to the computer, it should pop up the "new storage" (with Odin closed), but it doesn't, only charges.
I want try USB jig, because I have read that it will put the counter to 0 (hoping is this the problem)
saadiko said:
Yes, when I connect the cable Odin doesn't recognize it, so I supose that only charges (it's true, perhaps it doesn't do it, there isn't any icon). It's supposed when I conncet the phone to the computer, it should pop up the "new storage" (with Odin closed), but it doesn't, only charges.
I want try USB jig, because I have read that it will put the counter to 0 (hoping is this the problem)
Click to expand...
Click to collapse
Counter is not set to 0 with usb jig on this device. We use triangle away for that.
If you got Kies installed, then uninstall it and install samsung drivers only.
See if there's dust in the phones usb. Take some thin plastic, but be gentle.
Just a few ideas but you've probably tried it all.
tys0n said:
Counter is not set to 0 with usb jig on this device. We use triangle away for that.
If you got Kies installed, then uninstall it and install samsung drivers only.
See if there's dust in the phones usb. Take some thin plastic, but be gentle.
Just a few ideas but you've probably tried it all.
Click to expand...
Click to collapse
It's what I supposed, but it's a way to try if USB connection works (not 100% but if it doesn't work I will know it's a hardware problem)
I've tried uninstall Kies and install samsung drivers, I've cleaned the dust in the usb, but I don't understand what I have to do with the plastic, is the same plastic to keep food fresh? must put it on the usb?
not working yet
my USB JIG has arrived and I have tried it... and still doesn't work. Yes, it starts the download mode, but when I plug the USB to try something, the computer (ODIN) doesn't do anything. I have tried with my wife's phone and it works, it's a i 8190n, too.
I'm not going to try anything more, YOU WIN THIS TIME i8190n!
Hi, I have the same problem with my GT-8190, but it happens after my phone drop onto water..
charging is work, but it say "USB device Not Recognized" when I try to connect with PC..
now i want back to stock rom, but I can't do it if my phone not recognized to PC.
Do you have an idea how to flash official stock rom without PC(Odin)?
Sorry for my English
Hey guys, i have a problem
Yesterday i flashed the Note 4 Elite rom. Absolutely loved it but i had charging issues so i wanted to flash stock rom (4.4.4 T-Mobile netherlands) which i downloaded from sammobiles. So i booted into download mode, opened odin and flashed the rom. After a while (when it was done) i got a message that it failed and a red code: SW rev. CHECK FAIL DEVICE:3 BINARY 2.
now my phone cant do anything but boot into download mode. When i try to reboot or reboot in recovery i get the message: "firmare upgrade encountered an issue. Please select recovery mode in Kies & try again.", i've been trying flashing different stock roms, on different usb hubs with different cables for 4 hours but nothing works, can anybody help me out?
and now odin doesn't recognize my phone anymore
SamC95 said:
and now odin doesn't recognize my phone anymore
Click to expand...
Click to collapse
Hi
It sounds like you have an issue with your usb port. The fact that you had charging issues before and odin is having trouble detecting your device, I would start there. Have you tried giving the usb port a clean? Good luck.
If you can get a connection to odin, try flashing philz kernel tar, and wipe phone/install new rom in menu
noppy22 said:
Hi
It sounds like you have an issue with your usb port. The fact that you had charging issues before and odin is having trouble detecting your device, I would start there. Have you tried giving the usb port a clean? Good luck.
If you can get a connection to odin, try flashing philz kernel tar, and wipe phone/install new rom in menu
Click to expand...
Click to collapse
Thanks for your response but that wasn't the problem. When i uninstalled Kies the drivers uninstalled too i think, so i downloaded the correct drivers and odin recognized my phone then. Then i tried to flash a few different stock rom's and after a few fails the german XXUEFNI3 stock rom from sammobile worked!
SamC95 said:
Thanks for your response but that wasn't the problem. When i uninstalled Kies the drivers uninstalled too i think, so i downloaded the correct drivers and odin recognized my phone then. Then i tried to flash a few different stock rom's and after a few fails the german XXUEFNI3 stock rom from sammobile worked!
Click to expand...
Click to collapse
Good work!! Glad to see you worked it out. :good: