Hi
My CWM won't backup anymore, what i do is: I just select back-up, from rom-manager or in CWM, and it does everything it is supposed to do while backuping. Then, when its finished and i reboot, there is a backup, but its only around 30 mb, And when i try to restore it, it says MD5 keys don't match.
Since I want to flash P.A.C. man i kinda really really want this to work.
Any suggestions or sollutions??
Did you try to re-flash recovery? If this does not work I would recommend NV Restore (an ICS stock maybe???)
in rom manager, flash older recovery (5.0.2.0) not the newest. .
boot to cwm, backup... it should work (i had the same issue a few times and older recovery fixed it)
Related
Ok, in short I can't restore my rom after flashing Cyanogenmod 7 RC1. If I try to recover the phone remain locked in recovery mode.
That's the full story anyway:
Had a Galaxy S with Android 2.3.3 (Italy) rooted with CF-root
Made a backup with clockworkmod (no problem)
Made data/app backup with titanium backup (no problem)
Flashed Cyanogenmod 7 RC1 (no problem)
Restore Titaniun backup, have all my app back but had the first problem. None of my data has been restored, contacts, sms, calls... nothing. Why I ask?
Found that I can't access my sd card, read about the downgrade to froyo. Ok, time to restore to my original rom.
Made a restore of my nandroid backup, via rom manager.
BANG, phone hang up at boot on Galaxy S initial logo.
Ok, don't panic, restored an Eclair 2.1-u1 Rom via odin/download mode. Build XWJM7, Base XXJM3 (I read Flashing Eclair is safer)
Tried to update Android via Kies, but I get a message that my version cannot be upgraded.
Rooted Eclair via oneclickroot, installed rom manager/clockworkmod and tried again to restore my rom backup.
The restore seems to go Ok but the phone is stucked in recovery mode (2e). I get the Galaxy S logo for a few second, then logo disappear and reappear an phone go in recovery mode saying:
installing multi-csc
can't access to /system/csc/itv/system/
successfully applied multi-csc.
There is no way to go on, if I choose update.zip, phone go to clockworkmod recovery. Tried to restore an older backup, same result.
Now I'm again on Eclair.
So is there a way to have my original rom back via clockworkmod? Or I have to flash original CSC/MODEM/CODE via odin?
Thanks for helping.
I think your best choice is to flash from odin in download mode with a clean stock rom with re-partition to start again on a good base.
I made some other test.
Extracted the .img from cwm backup. The boot.img file is corrupted on both backup, file are identical so I though there's a problem backing up bootloader on my phone with cwm.
So I tried to recover all but boot. When I reboot (from eclair, cwm 2.5.1.2) in recovery mode I always get to android recovery 2e. As before if I select update.zip (and update is not present) system get me to cwm recovery. I select advanced restore and system ecc. but get the same problem the before: I get stucked in android recovery.
So again I flash via odin this time to gingerbread, rooted with cf-root, launch cwm manager tried for the last time to recover my damned backup.
And UA-TA! has my phone restored.
Any one has I idea why I was able to restore my rom (and app/data) only AFTER I restored my rom in another way?
I also made backup but it was giving error when i try to restor it
dadyal said:
I also made backup but it was giving error when i try to restor it
Click to expand...
Click to collapse
What error do you get?
I tried restoring from a nandroid backup I made and after the restore, I could only get as far as the i9000 boot screen. I went into recovery to try and flash a ROM, but CMW recovery could not mount my partitions (partitions got messed up by nandroid?) The only quick way I could think of was to use odin and refalsh and repartition.
I restored my nandroid from within CWM recovery. Is there something I am missing in the restore process? Obviously something went wrong.
asicman said:
I tried restoring from a nandroid backup I made and after the restore, I could only get as far as the i9000 boot screen. I went into recovery to try and flash a ROM, but CMW recovery could not mount my partitions (partitions got messed up by nandroid?) The only quick way I could think of was to use odin and refalsh and repartition.
I restored my nandroid from within CWM recovery. Is there something I am missing in the restore process? Obviously something went wrong.
Click to expand...
Click to collapse
Hey man, sounds like you tried to restore one system over another,
Forexample, stock over cm7? and that messes up the partitions as you see!
Try to install the rom you are trying to restore before you start restoring!
Should work then!
Hope this helps
I did indeed try to restore a ROM which was very different from the installed ROM. I will keep your suggestion in mind the next time I do a restore.
Just to confirm : yes, you need to flash the base ROM you're trying to restore.
I played with ICS over the weekend and got back by flashing a stock - well stock+ - JVZ and restoring nandroid.
Did the same thing, stupid as I am,
the big problem is that none of the computers I've tried with is detecting my phone right now.
I get in to CWM but and to download mode but that ain't helping me since i can't use Odin to flash back to stock rom.
Any ideas?
So today my phone was on and everything was fine, then while I was charging it, went away from it a few minutes then came back it was on the boot menu. It now can not get past the boot menu ever.
I have ClockWork Mod recovery installed, and CM7.1 stable.
I did a "backup" via the ClockWork Mod Recovery of the system.
I am also quite tempted to get the CM9 RC2 installed. But screw it if it any kind of unstable. CM7.1 stable is unstable enough.
What should I do? I would prefer it if I did not lose all my stuff (like app notes etc).
Can I like just put my phone into Download Mode, place the CM9 RC2 on the root folder, then do the good old
cyanogenmodWiki Full Update Guide method via recovery
without losing anything?
tottycs said:
So today my phone was on and everything was fine, then while I was charging it, went away from it a few minutes then came back it was on the boot menu. It now can not get past the boot menu ever.
I have ClockWork Mod recovery installed, and CM7.1 stable.
I did a "backup" via the ClockWork Mod Recovery of the system.
I am also quite tempted to get the CM9 RC2 installed. But screw it if it any kind of unstable. CM7.1 stable is unstable enough.
What should I do? I would prefer it if I did not lose all my stuff (like app notes etc).
Can I like just put my phone into Download Mode, place the CM9 RC2 on the root folder, then do the good old
cyanogenmodWiki Full Update Guide method via recovery
without losing anything?
Click to expand...
Click to collapse
If you have done a "backup" from CWM before the failure just restore that.
From CWM menu try to do a dalvic and cache clean up. also clear init.d and nstool settings and try to reboot
If you want to be more adventurus and loose your contacts, sms, settings...and other stuff from CWM do full wipe and cache and dalvic and then install your favorite rom.
I tried to installthe Gnexus port rom jr03l 4.1.1 rc 10. I was on TAJB'S Jellybean rom with devil kernel. I tried to install the rom as per the instructions given. I did a nandroid backup of the current rom before attempting to do so. The flash failed as the phone rebooted into recovery after a few minutes. I tried to restore from my nandroid backup. That failed too and it came up with a message of "no free space". I rebooted the phone and the phone automatically tried to flash the gnexus port rom again. It failed rebooted and got stuck on the devil kernel screen.
After about 20 mins, i took the battery out and rebooted into recovery. I really dont know where to go from here. I need to backup my efs folder too somehow.
I have a flash zip of the gnexus port rom, the tajb rom and a cm9 nightly in my internal sd card. I also have a nandroid backup of my cm9 rom.
Any help will be greatlyy appreciated!!!
Please help me.
Hey
Just flash any firmware (Official is preferred)..root it and do a restore of the backup u have..
Done
Hey do a factory reset then try to restore your backup
Sent from my Awesome I9000 using Slim Bean
Hello everyone!
I just installed CM9 by the clockworkMod method (after doing a backup of my former official ROM) and it worked great exept I forgot to save my contacts...
So I did another backup of the CM9 and tried to restore the previous ROM, so I would be able to save my contacts and restore the CM9 again.
BUT the restore didn't go well and my phone crashed...
Now I can access both download mod and Clockwork recovery mod, I can see my 2 backups in clockwork recovery mod but when I try, I have the following message:
"data.img not found. Skipping ...
datadata.img not found. Skipping...
[ and it's going on for a few lines...]
Restore complete!"
but it's way too fast (couple seconds) and when I try to reboot I'm stuck on samsung logo.
I tried some solution to unbrick I9000 but nothing worked and I'm kind of desperate after some hours trying to fix it^^
I have clockwork recoverymod v 2.5.1.2 if that's any help.
What can I do to repair my phone?
CM9 use CWM 6.x if I'm not mistaken. If your backup was created with CWM 5.x or other version, please try flash the same CWM version first before you restore your backup.
If still fail, mount the storage via CWM and copy clockworkmod folder from your phone into your computer, you can check what file is missing/etc.
Hey
Or ur can downgrade and root (like 2.3.6 link given below)
then restore from recovery and save ur contacts...
Thanks for your answers. I finally get to re-flash CM9 and back up my contacts by another way.
Hello guys,
I would like to flash a different version of CWM onto my N7000 but somehow it does not stick.
I currently run AOKP 4.1.2 and it has 6.0.1.5 as CWM which always gives you the md5 generation error when you do a nandroid backup.
I've installed Rom Manager and downloaded a different version of CWM and tried to install it both with Rom manager and also in CWM itself.
On the first boot after I flash some other recovery like the one from rom Manager (6.0.1.2) it actually loads the new recovery and lets me do a sucessful nandroid for example, but when i reboot into recovery another time the old recovery is back.
When I flash a new rom though, the CWM does get permanently replaced. I flashed a different rom which came with CWM 6.0.2.8 and then I permanently had that version. (same behaviour when I tried to overwrite it with the 6.0.1.2, wouldnt stick).
I even tried just partially restoring the nandroid and leaving boot out, but then phone will get stuck on boot.
Is there any way to permanently flash a recovery to the note without overwriting the whole boot.img? CWM and Rom Manager do not seem to be able. Maybe Heimdall or ODIN? Been so long since I had to use them..
Hope someone knows whats goin on with the recoveries.?!
because the recovery is in the kernel. to change recovery, you need to change the kernel. MD5 error is a known bug in AOKP.
you can use this
https://play.google.com/store/apps/...wsMSwxLDIxMiwiY29tLmgzcjN0MWMub25uYW5kYnVwIl0.
to make a nandroid backup on AOKP roms
nokiamodeln91 said:
because the recovery is in the kernel. to change recovery, you need to change the kernel. MD5 error is a known bug in AOKP.
you can use this
https://play.google.com/store/apps/...wsMSwxLDIxMiwiY29tLmgzcjN0MWMub25uYW5kYnVwIl0.
to make a nandroid backup on AOKP roms
Click to expand...
Click to collapse
thanks man, yea i got some tools installed that should be able to do a nandroid from running system, was just wondering if there is a way to permanently switch the recovery - it is sometimes booted, right after flash but then its gone - so there must be a way to stop the restore or?
Or are there any custom aokp kernels out there for the n7000? usually they only support TW or CM as far as I saw, or only older versions.