Related
invisibleSHIELD - Look it up for the Diamond my mate got it and it hardly shows any finger prints even after a days use and smudges whilst retaining the sheen of the device, also your back and front will be fully protected whilst keeping its form factor... if you have microscopic scratches like mine on screen that are obvious in well light conditions they will also disappear after application- ordered mine already...
Review and good pics... http://joeygadget.com/2007/08/15/on...-shield-screen-protector-for-iphone-and-treo/
They are available on ebay in most countries for Diamond - make sure you get the legit one as I am sure there are **** counterfits...
The ones for the iPhone are very hard to install and keep all of the little bubbles out, have plenty of patience when installing.
Although it is tough, the appearance after installation is extremely ugly.
Esp the screen.( no more grossy). I finally uninstalled it ( my wife said that my diamond is very ugly after the invisible shield, looks like an old PPC) and use other anti scratch screen protector and silicon case for body protection.
I have invisible shield for both 3g iphone and touch diamond...installation was easy actually but it doesnt look nice....u can tell theres something on the screen.
Would not recommend
I've already ordered one but couldn't installed it properly. It was very very hard and although I tried to be very carefully, still a lot of bubbles remained under the iShield. I put it off again and now I've got no screen protector anymore. Instead I use the original pocket case to wear the Diamond in my pocket. I think my fingers won't be able to scratch the display when touching it
Thanks for all the feedback
Interesting after install my friends one looked alright to me... hmmm I will post some pics after install and post my findings...
Anyone have a positive experience?
My friend's iPhone 3G looks MINT with it, literally can't tell it's there... But it was a ***** to install, especially around the corners.
I got one the other day and i'm sending it back, it looks apawling, far from invisible. I followed the instructions to the letter but couldn't get all of the little bubbles out, plus it just generally makes an expensive phone look like a piece of plastic junk.
Another thing is it doesn't actually cover the corners of the front of the phone so when i dropped mine the other day the corner got scratched.
Personally I wont use InvisibleSheild again as I believe their claims do not live up to the actual real world application.
shinobi_uk said:
I got one the other day and i'm sending it back, it looks apawling, far from invisible. I followed the instructions to the letter but couldn't get all of the little bubbles out, plus it just generally makes an expensive phone look like a piece of plastic junk.
Another thing is it doesn't actually cover the corners of the front of the phone so when i dropped mine the other day the corner got scratched.
Personally I wont use InvisibleSheild again as I believe their claims do not live up to the actual real world application.
Click to expand...
Click to collapse
Might make it look plastic, but I really can't say since my friend's iPhone IS plastic. Heh hopefully yours works out better, OP.
Mixed Views
Such mixed views - I have a feeling its down to having the patience to do the install properly - same my mates Diamond looks mint... hmmm
I had one of these for my Diamond and wasn't happy at all. I'm a very patient person but after a while it was just getting on my nerves. Trying to get it to bend around the case without leaving any air bubbles was just impossible. The parts that did stick down OK didn't look that nice either. It has a strange rubbery feel to it that I just don't like at all. I ended up ripping it off in frustration. Looked at their site and you can get your money back but you have to send it off to the states and I can't be bothered with the hassle or cost so I've just chalked it up as experience and will not recommend the product to anyone at all.
i bought and installed it right after getting my diamond. you can definetly see
that there's a protection layer on it and i wasn't at all satisfied for the first
week or so after application because the invisible shield felt sticky. it took me
the better part of 2 hours to get it right with no bubbles.
it's been some weeks now since installation and i'm pretty happy with the
shield. the stickyness is gone almost completely. i still can't slide my fingers or
stylus as smoothly over the touchscrees as without the shield tho.
in the end it's worth it for me because the device won't get any scratches at
all and i really hate scratches on my shiny devices
nuumuun said:
i bought and installed it right after getting my diamond. you can definetly see
that there's a protection layer on it and i wasn't at all satisfied for the first
week or so after application because the invisible shield felt sticky. it took me
the better part of 2 hours to get it right with no bubbles.
it's been some weeks now since installation and i'm pretty happy with the
shield. the stickyness is gone almost completely. i still can't slide my fingers or
stylus as smoothly over the touchscrees as without the shield tho.
in the end it's worth it for me because the device won't get any scratches at
all and i really hate scratches on my shiny devices
Click to expand...
Click to collapse
Would be great if you can post some pics front and back at a few angles in high light - not too much too ask surely lol oh and maybe put a cherry on top.
But seriously some pics would be great...
I've had my phone for a few weeks now with a case on it (body glove mirage). The case is really good, but every time I have to take it off for something I'm reminded how much better the phone feels with no case on it.
I'm curious, has anyone kept it naked? How well has it held up? I'm wondering if anyone who's done this now has scratches or anything on the metal back of the phone.
Thanks!
Mine has been naked since i got it on launch day - still looks new without a single mark on it. I have put my keys in my pocket with it a couple times, but i move them when I realize it.
No scratches on glass, metal or plastic.
I've got butterfingers so for me the case keeps me from tossing he phone across the room when I take it out of my pocket. Plust without it the phone almost feels too light
alphadog00 said:
Mine has been naked since i got it on launch day - still looks new without a single mark on it. I have put my keys in my pocket with it a couple times, but i move them when I realize it.
No scratches on glass, metal or plastic.
Click to expand...
Click to collapse
Hmm. This is promising lol. I do keep it in a pocket with nothing else. I used to keep my iPhone 3g in with my keys. The back did not enjoy that, though the front stayed relatively scratch free.
gunnyman said:
I've got butterfingers so for me the case keeps me from tossing he phone across the room when I take it out of my pocket. Plust without it the phone almost feels too light
Click to expand...
Click to collapse
I've dropped phones before too, thankfully not my Captivate yet. I just played with it without the case some more and it just makes life so much easier. A lot less reaching.
It's so tough. I've never used cases before because I hate the way all of them feel and the width they add. But I also don't want to destroy my phone like my 3G lol.
If you keep it naked don't drop it! The glass is supposed to be tough and scratch resistant but the paint on the metal back plate scratches easily and the plastics get dings when it hits the ground. I droped my phone twice in one day and now have a ding in each corner. That's 2 dings each time I lost hold of it. Now it has one of those film protectors front back and sides. And I have the body gloves case that I go back and forth between.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
I have also had mine without a case/screen protector since launch day. the only noticeable scratches are light ones at the top and bottom where it curves on the plastic body. other than that, the screen and back are perfect. I have dropped mine a few times, but its usually about from 2-3' up, nothing like a 6' drop.
Interesting stuff. I think ultimately I'll decide to keep the case on. Because I know that one time I drop it or get a decent scratch I'm going to be cursing myself out for not having it on there lol.
Side question: How well do we think these phones will hold their value?
I ask because I was able to sell my 3g on ebay for $130 even though the screen was dead, the camera was dead, and it was really scratched up. Not bad since I paid 200 for it a year and a half before!
InsaneJester17 said:
Interesting stuff. I think ultimately I'll decide to keep the case on. Because I know that one time I drop it or get a decent scratch I'm going to be cursing myself out for not having it on there lol.
Side question: How well do we think these phones will hold their value?
I ask because I was able to sell my 3g on ebay for $130 even though the screen was dead, the camera was dead, and it was really scratched up. Not bad since I paid 200 for it a year and a half before!
Click to expand...
Click to collapse
That's the one good thing about buying Apple ANYTHING. It holds its value like crazy. I can tell you from experience that the 1 year old HTC Hero can still fetch 200 bucks. A Samsung Moment can get about $150.
The Captivates are selling on Ebay right now for about $400.
My 3G got scuffed on the back from pulling it in and out of a belt holster that was lined. I finally decided no more holsters.
As for value - I got $190 for my 8GB 3G. It is hard to say about these. Lots of people want contract free phones. Since the captivate has top notch hardware with 16GB internal and expandable storage, I think it is a good value.
If we can unlock them after Froyo (AT&T said they would after 90 days to me anyway) then I think I can get my $150 back I paid for the phone maybe more.
It is all about supply and demand. I am amazed someone paid what they did for my 3G - it is old hardware, but Apple has people fooled. iPhone 4 is going for $900 on eBay - crazy stuff. As long as Apple doesn't sell an unlocked US version contract free, the prices will stay sky high on iPhone. Captivate, not so much. The non-contract price is about $500 so in 2 years what will people pay for a used one?
Well it really depends which network and which phone I think the captivate being the only decent android on at&t will last a bit longer than maybe the vibrant and other variants like the fascinate or epic whose carriers embrace high end android phones
Sent from my SAMSUNG-SGH-I897 using XDA App
i go no case.....had my iphone 3g with no case for probably a year and a half, and now i am running a naked captivate also. I actually like the feel of a case better, but have yet to find one i feel like investing in....and it looks so awesome without a case!!
I absolutely love my Body Glove case. It's the best mobile device case I've ever used, and I've had a cell phone for thirteen years.
I kept my first captivate naked for the first three days and noticed that my "Scratch Resistant Gorilla Glass" couldn't hold up to three days in the pocket of my slacks by itself. I was just beside myself as I've had an iphone without a screen protector since the phone launched, and never saw a scratch otherwise.
Seems to me that between the iPhone 4 and Captivate both having threads and threads of scratched devices, Corning needs to rethink the Gorilla Glass formula. Whatever the 3GS screen cover was made of should be the standard. I beat the hell out of that phone and not one scratch to be seen.
I really liked the phone design and lines so I went with zagg max protection. It's just like the screen protector but covers the whole body of the phone, it has no shock protection but its virtually scratch proof.
Sent from my SAMSUNG-SGH-I897
Naked since day 1. With the exception of 2x 3"x1/4" eGrips strips I put on the back cover sides to prevent me from fumbling the phone like a wet bar of soap. Love the thin-ness and the egrips don't hinder "pocketability".
Had the Sony X10 then switched to the Captivate. I go naked just keep loose change and keys in other pocket. Love the thinness of the phone. Still searching for that perfect skin. Tried a few but just make the phone bulky. A lot of the wear and tear of a phone has to do with your job and lifestyle. Learning to adapt to how you work or play and also how soon you want another phone(gadget lust) plays a part. I tend to sell/trade a newly released phone within 6 months so I try to keep them like new. But to each his own.
Divinedark said:
I absolutely love my Body Glove case. It's the best mobile device case I've ever used, and I've had a cell phone for thirteen years.
I kept my first captivate naked for the first three days and noticed that my "Scratch Resistant Gorilla Glass" couldn't hold up to three days in the pocket of my slacks by itself. I was just beside myself as I've had an iphone without a screen protector since the phone launched, and never saw a scratch otherwise.
Seems to me that between the iPhone 4 and Captivate both having threads and threads of scratched devices, Corning needs to rethink the Gorilla Glass formula. Whatever the 3GS screen cover was made of should be the standard. I beat the hell out of that phone and not one scratch to be seen.
Click to expand...
Click to collapse
been naked for about a week now and havnt got a scratch on my screen yet so i dont know u did to get your scratch. but i do still want a case just havnt got around to getting one yet and my phone is holding up just fine.
Hi,
I personally love my xperia X1. Its a lovely piece of sleek hardware, can be easily overclocked and has a good solid metal chassy. I bought a black one from rogers and I love it. I personally havent had any cracking issues or anything, in fact my phone has been dropped on pavement 2 times and in deep snow once, and emerged without even a scratch.
Because I hate frequent hardware changes Id like to keep my xperia for a full five years and would like to buy a second phone as they are really becoming cheap now. I have had my eye on the silver phones for a while, but know they are more prone to cracking. Particularly phones made in weeks 44,45 and 46 right?
Are there any silver phones that have had this issue corrected yet and been relreaed?
When buying a phone and shopping is there a way to tell which phones will have the cracking issue? Serial or batch numbers on the box mabye.
If I am concerned should I just stick to the black ones?
Finally other than ebay does anyone know where I can get a cheap new or refurbished X1?
Any help is appreciated.
hahahhahahahahahahaha
I have a black xperia and it cracks like crazy xD and i didn't drop it once xD
Hi, if the cracking is whats got you concerned, why don't you try getting just the housing? there's guides on how to replace it, I've done it myself. Replaced both the ribbon cable and the housing.
I still have my silver X. bought it at bethefirstx1 (1st day). my housing has been replaced once because of crack. I never bumped my phone nor dropped it. but I have cracks all over it:
1. the dreaded volume button crack (2nd time after replacement)
2. the camera button crack
3. the middle area crack (rumored to have been cracked due for using a car stand, I don't have car stand but I got the crack on the same location)
4. the camera part crack up to the top of the phone
The only thing left for me to have is the crack on the stylus area and the crack on the earphone plug.
So after these years, what I can tell about it is it still cracks due to user mishandling (please correct me if I'm work I already rant a lot of times on the crack thread)
but I found out that whenever you change your battery/take off your memory card, you either use your fingernail to open the cover on one of the four areas where you can slip it. That actually inclines the cover and tilts it on the side where your fingernail opened it. Thus it results to the cracking of the opposite trapeziodal area (either the volume or camera part)
I had my keyboard replaced and the camera housing had the crack after it was replaced. (I'm thinking it was from the technician's part of re-assembling it)
Lastly, the metallic middle portion of the phone chipped off:
I think from the leather case that came with my X1, the middle part of it is exposed and I wear 'em clipped on my belt. I guess that how got it to chip off, whenever you reach your phone on your belt side you actually hold it on the expose area pressing your thumb to it to lever your fingers on the magnetized leather case to open up. For more than 3 years of doing it everyday, I guess that the reason for my crack on the metallic area.
If you live in the UK you could pay a visit to CEX also known as Entertainment Exchange, they also have a website... I bought my x1 from them about three months ago, and everything they sell comes with a 12 month guarantee be it second user or brand new.
just buy the black one, the silver ones seem to crack a lot easier. Or just get another phone that's better, they should be cheap now.
I got mine for $120 so can't complain.
Christopher888 said:
Hi,
I personally love my xperia X1. Its a lovely piece of sleek hardware, can be easily overclocked and has a good solid metal chassy. I bought a black one from rogers and I love it. I personally havent had any cracking issues or anything, in fact my phone has been dropped on pavement 2 times and in deep snow once, and emerged without even a scratch.
Because I hate frequent hardware changes Id like to keep my xperia for a full five years and would like to buy a second phone as they are really becoming cheap now. I have had my eye on the silver phones for a while, but know they are more prone to cracking. Particularly phones made in weeks 44,45 and 46 right?
Are there any silver phones that have had this issue corrected yet and been relreaed?
When buying a phone and shopping is there a way to tell which phones will have the cracking issue? Serial or batch numbers on the box mabye.
If I am concerned should I just stick to the black ones?
Finally other than ebay does anyone know where I can get a cheap new or refurbished X1?
Any help is appreciated.
Click to expand...
Click to collapse
I bought an silver x1i this 14 feb 2011 and it shows some crack on the battery-housing,flaking paint is my another problem . I'm still under warranty ..what should I do? I love x1 a lot than others do..
Sorry for bad english, hope you understand my problem..!
"Tough" Silver X1
I have a Silver X1 for about 3 years now, fell down 15 feet, hit a stone and has a tiny little dent on the screen, never had cracking problems until 2 weeks ago, fell out my hand, 3 floors down, ricocheted off a handrail and landed on concrete pavement, one crack upper right hand corner, and well usual wear and tear, the bright chrome siding wore off due to car keys in same pocket.
Don't know whether my phone actually is tough, or plain dumb luck.
Anyone have suggestions for dealing with cracks on an out of warranty TP?
I sent my Touchpad back in February when it was in warranty, and got a new case. Then the girlfriend liked the fit on my TP better and insisted that I trade her for hers which hadn't had any issue and hadn't been back for repair.
Well, it now has cracks. There are two cracks leading from the speaker openings onto the back of the case that I was ignoring. Now there's a crack from one of the speakers to the front, which is more threatening since if the other side of that cracks the thin piece will come off...
It's like the poor TP is falling apart. I've had it in the official HP case the whole time and am extremely careful with it, of course, everyone knows that doesn't really help. It seems some of the cases were just destined to crack!
So is there anything to be done? Does anyone know how much HP charges if you PAY them to fix it? Probably too much.
What about a Skinomi case like this: http://www.skinomi.com/hp-touchpad-carbon-fiber-skin-protector.html - will that help keep piece next to the speaker from cracking the rest of the way, and maybe at least.. *sigh*... hide the other cracks?
I have a feeling that I will eventually have a pile of loose electronics in my hand here....
lotherius said:
Anyone have suggestions for dealing with cracks on an out of warranty TP?
I sent my Touchpad back in February when it was in warranty, and got a new case. Then the girlfriend liked the fit on my TP better and insisted that I trade her for hers which hadn't had any issue and hadn't been back for repair.
Well, it now has cracks. There are two cracks leading from the speaker openings onto the back of the case that I was ignoring. Now there's a crack from one of the speakers to the front, which is more threatening since if the other side of that cracks the thin piece will come off...
It's like the poor TP is falling apart. I've had it in the official HP case the whole time and am extremely careful with it, of course, everyone knows that doesn't really help. It seems some of the cases were just destined to crack!
So is there anything to be done? Does anyone know how much HP charges if you PAY them to fix it? Probably too much.
What about a Skinomi case like this: http://www.skinomi.com/hp-touchpad-carbon-fiber-skin-protector.html - will that help keep piece next to the speaker from cracking the rest of the way, and maybe at least.. *sigh*... hide the other cracks?
I have a feeling that I will eventually have a pile of loose electronics in my hand here....
Click to expand...
Click to collapse
I know what you mean about the cracking - I think all TP users share our remorse.
I don't know what HP charges, or even if that's an option with them, considering how quickly they dropped any sort of support for us after launch.
What I've done in regards to the cracking is just dab a small amount of super glue on/in the cracked plastic (while paying mind to the speakers!) and hold it there for a hot second. Then, I throw back on the official HP case and pretend the cosmetic issue doesn't exist...... Until I find a new crack..... and then, it's rinse and repeat.
As for the Skinomi protector, I don't have one (although highly contemplating getting one, now) but, you can find it cheaper on Amazon. However, this SKIN got better reviews, plus it's cheaper!
/sigh
I also had my case replaced due to cracking around the speakers. From the sound of it, it may just always happen. I plan to just put dabs of super glue if it starts again, and not worry about it. I've heard some people saying they think it's from using a case (ie putting too much pressure on it), and others saying it's just a manufacturing defect. Unless it completely falls apart, it shouldn't really cause problems, hopefully. If anything, maybe just put it in some case, even like a TPU wrap.
the cracks on my speakers have gotten way worse
the cracks propagated to the back side, plus, cracks appear on the microusb connector as well
i feel it's cuz of the official case that's causing it
the tablet is always home, does not get that much use, it's mostly just sitting around
anyways, looking at the skinomi link, it looks pretty promising
it will hide the cracks for sure, plus, i have always hated the matte finish on the back because it's a dirt magnet
anonxlg said:
i feel it's cuz of the official case that's causing it
the tablet is always home, does not get that much use, it's mostly just sitting around
Click to expand...
Click to collapse
Honestly, though I can't see *how* the official case can be causing the problem.
Many people had cracks when their devices were brand new, and didn't have the case because it still cost like fiddy bux at the time. HP even tried sending out cases to people as a preventative.
Also, I "manage" four Touchpads. So far, mine is the only one that has cracked - twice now. The others also use the official case. However, only two of them get used heavily, mine and the girlfriend's. She insists that I must be rough with my Touchpad, but I am definitely not rough with it - I am extremely careful. Her case shows scars from being dropped, chewed on by dogs(!), etc... but no cracks.
I wonder if there's a "usage scenario" that causes something internal to heat causing the cracks. But I've never noticed my TP getting excessively hot. It's just whether or not you got a good backplate or not.
When I had my first Touchpad repaired under warranty, the new backplate it came with had a fit much better than any of the others we'd bought. It fit perfectly flush with the glass and had no uneven spots around the edge. None of the other Touchpads we have matched that level of fit. Unfortunately, my girlfriend took that Touchpad to gift to someone else, and left me with one of the ones that had a less than perfect fit. I think the level of fit of the original backplate has a lot to do with whether or not it cracks.
I did find a place online that sells replacement backplates, but they're like $50 a pop... Not worth it even for those of us that paid $200 for our 32gb touchpads. http://www.portatronics.com/product_info.php?info=p10245_HP-Touchpad-Backplate-Part-Only.html -- I don't know anything about that site or the part. Oddly enough, it also isn't listed if you search by category on their website. I could only find it by google search. It lets me add it to the cart, but who knows if it is actually available.
Shortly after I noticed the cracks I bought a Stealtharmor cover for the back while it was on sale.. Nearly a year later and the cracks haven't gotten any worse.
I guess the subject says it all but just to be clear. I put my brand new Z3 Compact in my back pocket, too it out 2 minutes later and had a nice crack over the screen. The durability of the Z3 Compact screen is just a joke when it breaks this fast.
I carried my old HTC One S in my back pocket for the last 2.5 year and it just has some scratches (it also survived some nasty falls).
I've contacted Sony for support and I'm curious how they will respond...
marcfonteijn said:
I guess the subject says it all but just to be clear. I put my brand new Z3 Compact in my back pocket, too it out 2 minutes later and had a nice crack over the screen. The durability of the Z3 Compact screen is just a joke when it breaks this fast.
I carried my old HTC One S in my back pocket for the last 2.5 year and it just has some scratches (it also survived some nasty falls).
I've contacted Sony for support and I'm curious how they will respond...
Click to expand...
Click to collapse
You must have buttocks made of steel.
I'm pretty sure it didn't just sponaneously crack in your back pocket, you must have sat down or something while it was in there.
By the way, keeping your phone in your back pocket is like asking for it to be stolen by pickpockets.
The biggest joke here must the be that you're angry and surprised that a phone breaks when carrying it in you're back pocket.
Skickat från min LG-V500 via Tapatalk
degraaff said:
You must have buttocks made of steel.
I'm pretty sure it didn't just sponaneously crack in your back pocket, you must have sat down or something while it was in there.
By the way, keeping your phone in your back pocket is like asking for it to be stolen by pickpockets.
Click to expand...
Click to collapse
^This...
tribemac said:
The biggest joke here must the be that you're angry and surprised that a phone breaks when carrying it in you're back pocket.
Skickat från min LG-V500 via Tapatalk
Click to expand...
Click to collapse
...and this^^^
I get the impression that the black version seems to be more sensitive.... Fingers crossed 'cause I got the white one
I suppose you didn't use a case or protection of any kind?
I hope Sony say 'Tough titties don't sit on your phone moron!'
Seriously what do people expect...
Looks like some scratches on the right side as well as a chip. Your leaving a lot out it wasn't just a "stuck it in my back pocket and it broke".
Even tho phones never used to break in back pockets, suddenly iPhone 6 and now z3c owners are saying, what do you expect.
I'd expect a phone to not be weaker than the old ones actually.
Hope you get it sorted op.
i'm sure they broke too. but no one took the time to post about it until now because they knew that it was their fault for breaking it. now all of a sudden, they are like, hey i should tell everyone about this because it makes me cool.
I carry my Z3C naked, not a single scratch yet.
qbert456 said:
Even tho phones never used to break in back pockets, suddenly iPhone 6 and now z3c owners are saying, what do you expect.
I'd expect a phone to not be weaker than the old ones actually.
Hope you get it sorted op.
Click to expand...
Click to collapse
Phones are steadily getting larger & thinner, you don't need to be a rocket scientist to figure out that sitting on your phone isn't going to do it a world of good.
In other news: camera in phones aren't as good as dedicated cameras.. (thought I'd better mention that too, as that's something else many people have difficulty grasping)
you're right, planes have got larger, thinner (skinned) and lighter too .
Best not fly anymore then as by your rationale we should expect breakage and not expect improvements as technology advances.
qbert456 said:
you're right, planes have got larger, thinner (skinned) and lighter too .
Best not fly anymore then as by your rationale we should expect breakage and not expect improvements as technology advances.
Click to expand...
Click to collapse
People too seem to have got larger and more thin skinned...
I'm not sure how to spell this out.
The laws of physics dictate, larger thinner objects are more likely to break/bend when pressure/weight is applied than smaller fatter ones.
Nothing to do with technology, people need to stop being sheep and apply a little common sense, before doing stupid things then 'blaming the technology' - take some responsibility for yourself ffs.
My Z3C was in front pocket (not very tight pants) and front screen was cracked with no reason.
dl.dropboxusercontent.com/u/2926416/IMG_0445.JPG
dl.dropboxusercontent.com/u/2926416/IMG_0434.JPG
marcfonteijn said:
I guess the subject says it all but just to be clear. I put my brand new Z3 Compact in my back pocket, too it out 2 minutes later and had a nice crack over the screen. The durability of the Z3 Compact screen is just a joke when it breaks this fast.
I carried my old HTC One S in my back pocket for the last 2.5 year and it just has some scratches (it also survived some nasty falls).
I've contacted Sony for support and I'm curious how they will respond...
Click to expand...
Click to collapse
that is basically identical the crack that i had except mine was on the back. Mine is back with Sony at the moment! mine was in my front pocket though.
Just because manufactures make the phone thinner and lighter does not mean the way people use them are any different. people still put them in pockets etc. I have kept my nexus 5 in my back pocket for ages, sat down on it etc and its not cracked. (im 6ft4 and about 17st) i get my sony and breaks in 5 days...when its in the front pocket. There are making things lighter and thinner sure but not to the point where i have to make sure i carry a phone in bubble wrap because they cant make it strong enough for everyday use. Something is wrong with the phones not with the way are they being carried!
tribemac said:
The biggest joke here must the be that you're angry and surprised that a phone breaks when carrying it in you're back pocket.
Skickat från min LG-V500 via Tapatalk
Click to expand...
Click to collapse
Quoted for truth
You really should get a phone with more durable material if you plan to pocket it. It's just common sense it is fragile..... Belt clip for me!
Glass on Back Of Xperia Z3 C may be inferior.
Inferior meaning not the Asahi Dragontrail or Gorilla Glass 3
Equivalent we HOPE is on the front.
Does Sony specify exactly what is on the front of these phones ?
And I think the specs on the back glass are more vague.
Seems like design flaw / substitution glass or maybe illogical
design flaw.
One of main reasons I want a phone this
size is to put in front pocket and carry ..
Use to play Internet Radio while I work and
browse play on when not working.
In a good case is this phone rugged enough for physically active
People ? Or too fragile .
robertkoa said:
Inferior meaning not the Asahi Dragontrail or Gorilla Glass 3
Equivalent we HOPE is on the front.
Does Sony specify exactly what is on the front of these phones ?
Seems like design flaw / substitution glass or maybe illogical
design flaw.
One of main reasons I want a phone this
size is to put in front pocket and carry ..
Use to play Internet Radio while I work and
browse play on when not working.
In a good case is this phone rugged enough for physically active
People ? Or too fragile .
Click to expand...
Click to collapse
The front glass seems good, no micro scratches so far. I'm just going to get me a Spigen Ultra Hybrid clear bumper case as soon as it comes out for the Z3C, then it'll be fine.
Right now I have this as a temporary case: http://www.mobilefun.co.uk/flexishield-sony-xperia-z3-compact-gel-case-frost-white-p49135.htm
Some people seem to think scratch resistant = shatterproof. Actually the most scratch resistant materials like diamond etc are not hard to shatter/break at all. It has nothing to do with one another.
I was going to buy the Z3c and apply a shatter resistant film on the front and back, but that only protects from knocks to the panel from resonating and breaking the glass, not from pressure from lifting your leg with the phone in your front pocket.
If anyone has a go-to brand of protective film they use to prevent breaking (not so much scratching, as I can replace the film every now and again), I want to know!